[PATCH] ARM: 2818/1: BAST - Use platform device for SuperIO 16550s

Patch from Ben Dooks

Use platform device for the 16500 UARTs in the onboard
SuperIO controller.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

arch/arm/configs/bast_defconfig

@@ -561,7 +561,6 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
 #
 CONFIG_SERIAL_S3C2410=y
 CONFIG_SERIAL_S3C2410_CONSOLE=y
-CONFIG_SERIAL_BAST_SIO=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y

arch/arm/configs/s3c2410_defconfig

@@ -570,7 +570,6 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
 #
 CONFIG_SERIAL_S3C2410=y
 CONFIG_SERIAL_S3C2410_CONSOLE=y
-CONFIG_SERIAL_BAST_SIO=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y

arch/arm/mach-s3c2410/mach-bast.c

@@ -28,6 +28,7 @@
  *     14-Mar-2006 BJD  Updated for __iomem changes
  *     22-Jun-2006 BJD  Added DM9000 platform information
  *     28-Jun-2006 BJD  Moved pm functionality out to common code
+ *     17-Jul-2006 BJD  Changed to platform device for SuperIO 16550s
 */
 
 #include <linux/kernel.h>
@@ -64,6 +65,8 @@
 #include <linux/mtd/nand_ecc.h>
 #include <linux/mtd/partitions.h>
 
+#include <linux/serial_8250.h>
+
 #include "clock.h"
 #include "devs.h"
 #include "cpu.h"
@@ -351,6 +354,39 @@ static struct platform_device bast_device_dm9k = {
 	}
 };
 
+/* serial devices */
+
+#define SERIAL_BASE  (S3C2410_CS2 + BAST_PA_SUPERIO)
+#define SERIAL_FLAGS (UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_SHARE_IRQ)
+#define SERIAL_CLK   (1843200)
+
+static struct plat_serial8250_port bast_sio_data[] = {
+	[0] = {
+		.mapbase	= SERIAL_BASE + 0x2f8,
+		.irq		= IRQ_PCSERIAL1,
+		.flags		= SERIAL_FLAGS,
+		.iotype		= UPIO_MEM,
+		.regshift	= 0,
+		.uartclk	= SERIAL_CLK,
+	},
+	[1] = {
+		.mapbase	= SERIAL_BASE + 0x3f8,
+		.irq		= IRQ_PCSERIAL2,
+		.flags		= SERIAL_FLAGS,
+		.iotype		= UPIO_MEM,
+		.regshift	= 0,
+		.uartclk	= SERIAL_CLK,
+	},
+	{ }
+};
+
+static struct platform_device bast_sio = {
+	.name			= "serial8250",
+	.id			= 0,
+	.dev			= {
+		.platform_data	= &bast_sio_data,
+	},
+};
 
 /* Standard BAST devices */
 
@@ -364,6 +400,7 @@ static struct platform_device *bast_devices[] __initdata = {
 	&s3c_device_nand,
 	&bast_device_nor,
 	&bast_device_dm9k,
+	&bast_sio,
 };
 
 static struct clk *bast_clocks[] = {

drivers/serial/Kconfig

@@ -306,13 +306,6 @@ config SERIAL_S3C2410_CONSOLE
 	  your boot loader about how to pass options to the kernel at
 	  boot time.)
 
-config SERIAL_BAST_SIO
-	bool "Support for BAST SuperIO serial ports"
-	depends on ARCH_BAST && SERIAL_8250=y
-	help
-	  Support for registerin the SuperIO chip on BAST board with
-	  the 8250/16550 uart code.
-
 config SERIAL_DZ
 	bool "DECstation DZ serial driver"
 	depends on MACH_DECSTATION && MIPS32

drivers/serial/Makefile

@@ -44,7 +44,6 @@ obj-$(CONFIG_SERIAL_LH7A40X) += serial_lh7a40x.o
 obj-$(CONFIG_SERIAL_AU1X00) += au1x00_uart.o
 obj-$(CONFIG_SERIAL_DZ) += dz.o
 obj-$(CONFIG_SERIAL_SH_SCI) += sh-sci.o
-obj-$(CONFIG_SERIAL_BAST_SIO) += bast_sio.o
 obj-$(CONFIG_SERIAL_SGI_L1_CONSOLE) += sn_console.o
 obj-$(CONFIG_SERIAL_CPM) += cpm_uart/
 obj-$(CONFIG_SERIAL_IMX) += imx.o

drivers/serial/bast_sio.c

-/* linux/drivers/serial/bast_sio.c
- *
- * Copyright (c) 2004 Simtec Electronics
- *   Ben Dooks <ben@simtec.co.uk>
- *
- * http://www.simtec.co.uk/products/EB2410ITX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Modifications:
- *	23-Sep-2004  BJD  Added copyright header
- *	23-Sep-2004  BJD  Added serial port remove code
-*/
-
-#include <linux/module.h>
-#include <linux/config.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/types.h>
-
-#include <asm/io.h>
-#include <asm/serial.h>
-#include <asm/mach-types.h>
-
-#include <asm/arch/map.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/bast-map.h>
-#include <asm/arch/bast-irq.h>
-
-static int __init serial_bast_register(unsigned long port, unsigned int irq)
-{
-	struct serial_struct serial_req;
-
-	serial_req.flags      = UPF_AUTOPROBE | UPF_SHARE_IRQ;
-	serial_req.baud_base  = BASE_BAUD;
-	serial_req.irq        = irq;
-	serial_req.io_type    = UPIO_MEM;
-	serial_req.iomap_base = port;
-	serial_req.iomem_base = ioremap(port, 0x10);
-	serial_req.iomem_reg_shift = 0;
-
-	return register_serial(&serial_req);
-}
-
-#define SERIAL_BASE (S3C2410_CS2 + BAST_PA_SUPERIO)
-
-static int port[2] = { -1, -1 };
-
-static int __init serial_bast_init(void)
-{
-	if (machine_is_bast()) {
-		port[0] = serial_bast_register(SERIAL_BASE + 0x2f8, IRQ_PCSERIAL1);
-		port[1] = serial_bast_register(SERIAL_BASE + 0x3f8, IRQ_PCSERIAL2);
-	}
-
-	return 0;
-}
-
-static void __exit serial_bast_exit(void)
-{
-	if (port[0] != -1)
-		unregister_serial(port[0]);
-	if (port[1] != -1)
-		unregister_serial(port[1]);
-}
-
-
-module_init(serial_bast_init);
-module_exit(serial_bast_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Ben Dooks, ben@simtec.co.uk");
-MODULE_DESCRIPTION("BAST Onboard Serial setup");
-
-