Merge branch 'next/cross-platform' of git://git.linaro.org/people/arnd/arm-soc

* 'next/cross-platform' of git://git.linaro.org/people/arnd/arm-soc:
  arm/imx: use Kconfig choice for low-level debug UART selection
  ARM: realview: use Kconfig choice for debug UART selection
  ARM: plat-samsung: use Kconfig choice for debug UART selection
  ARM: versatile: convert logical CPU numbers to physical numbers
  ARM: ux500: convert logical CPU numbers to physical numbers
  ARM: shmobile: convert logical CPU numbers to physical numbers
  ARM: msm: convert logical CPU numbers to physical numbers
  ARM: exynos4: convert logical CPU numbers to physical numbers

Fix up trivial conflict (config DEBUG_S3C_UART move/split vs addition of
ARM_KPROBES_TEST option) in arch/arm/Kconfig.debug

arch/arm/Kconfig.debug

@@ -128,6 +128,111 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to the second serial port on these devices.
 
+	config DEBUG_IMX1_UART
+		bool "i.MX1 Debug UART"
+		depends on SOC_IMX1
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX1.
+
+	config DEBUG_IMX23_UART
+		bool "i.MX23 Debug UART"
+		depends on SOC_IMX23
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX23.
+
+	config DEBUG_IMX25_UART
+		bool "i.MX25 Debug UART"
+		depends on SOC_IMX25
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX25.
+
+	config DEBUG_IMX21_IMX27_UART
+		bool "i.MX21 and i.MX27 Debug UART"
+		depends on SOC_IMX21 || SOC_IMX27
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX21 or i.MX27.
+
+	config DEBUG_IMX28_UART
+		bool "i.MX28 Debug UART"
+		depends on SOC_IMX28
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX28.
+
+	config DEBUG_IMX31_IMX35_UART
+		bool "i.MX31 and i.MX35 Debug UART"
+		depends on SOC_IMX31 || SOC_IMX35
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX31 or i.MX35.
+
+	config DEBUG_IMX51_UART
+		bool "i.MX51 Debug UART"
+		depends on SOC_IMX51
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX51.
+
+	config DEBUG_IMX50_IMX53_UART
+		bool "i.MX50 and i.MX53 Debug UART"
+		depends on SOC_IMX50 || SOC_IMX53
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX50 or i.MX53.
+
+	config DEBUG_S3C_UART0
+		depends on PLAT_SAMSUNG
+		bool "Use S3C UART 0 for low-level debug"
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to UART 0. The port must have been initialised
+		  by the boot-loader before use.
+
+		  The uncompressor code port configuration is now handled
+		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+	config DEBUG_S3C_UART1
+		depends on PLAT_SAMSUNG
+		bool "Use S3C UART 1 for low-level debug"
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to UART 1. The port must have been initialised
+		  by the boot-loader before use.
+
+		  The uncompressor code port configuration is now handled
+		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+	config DEBUG_S3C_UART2
+		depends on PLAT_SAMSUNG
+		bool "Use S3C UART 2 for low-level debug"
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to UART 2. The port must have been initialised
+		  by the boot-loader before use.
+
+		  The uncompressor code port configuration is now handled
+		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+	config DEBUG_REALVIEW_STD_PORT
+		bool "RealView Default UART"
+		depends on ARCH_REALVIEW
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the serial port on RealView EB, PB11MP, PBA8
+		  and PBX platforms.
+
+	config DEBUG_REALVIEW_PB1176_PORT
+		bool "RealView PB1176 UART"
+		depends on MACH_REALVIEW_PB1176
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the standard serial port on the RealView
+		  PB1176 platform.
+
 endchoice
 
 config EARLY_PRINTK
@@ -146,18 +251,6 @@ config OC_ETM
 	  buffer driver that will allow you to collect traces of the
 	  kernel code.
 
-config DEBUG_S3C_UART
-	depends on PLAT_SAMSUNG
-	int "S3C UART to use for low-level debug"
-	default "0"
-	help
-	  Choice for UART for kernel low-level using S3C UARTS,
-	  should be between zero and two. The port must have been
-	  initialised by the boot-loader before use.
-
-	  The uncompressor code port configuration is now handled
-	  by CONFIG_S3C_LOWLEVEL_UART_PORT.
-
 config ARM_KPROBES_TEST
 	tristate "Kprobes test module"
 	depends on KPROBES && MODULES

arch/arm/mach-exynos4/hotplug.c

@@ -75,7 +75,7 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
 		    :
 		    : "memory", "cc");
 
-		if (pen_release == cpu) {
+		if (pen_release == cpu_logical_map(cpu)) {
 			/*
 			 * OK, proper wakeup, we're done
 			 */

arch/arm/mach-exynos4/platsmp.c

@@ -132,7 +132,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 	 * Note that "pen_release" is the hardware CPU ID, whereas
 	 * "cpu" is Linux's internal ID.
 	 */
-	write_pen_release(cpu);
+	write_pen_release(cpu_logical_map(cpu));
 
 	if (!(__raw_readl(S5P_ARM_CORE1_STATUS) & S5P_CORE_LOCAL_PWR_EN)) {
 		__raw_writel(S5P_CORE_LOCAL_PWR_EN,

arch/arm/mach-msm/hotplug.c

@@ -37,7 +37,7 @@ static inline void platform_do_lowpower(unsigned int cpu)
 		    :
 		    : "memory", "cc");
 
-		if (pen_release == cpu) {
+		if (pen_release == cpu_logical_map(cpu)) {
 			/*
 			 * OK, proper wakeup, we're done
 			 */

arch/arm/mach-msm/platsmp.c

@@ -117,7 +117,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 	 * Note that "pen_release" is the hardware CPU ID, whereas
 	 * "cpu" is Linux's internal ID.
 	 */
-	pen_release = cpu;
+	pen_release = cpu_logical_map(cpu);
 	__cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
 	outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
 

arch/arm/mach-mxs/include/mach/debug-macro.S

@@ -14,17 +14,9 @@
 #include <mach/mx23.h>
 #include <mach/mx28.h>
 
-#ifdef CONFIG_SOC_IMX23
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#ifdef CONFIG_DEBUG_IMX23_UART
 #define UART_PADDR	MX23_DUART_BASE_ADDR
-#endif
-
-#ifdef CONFIG_SOC_IMX28
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#elif defined (CONFIG_DEBUG_IMX28_UART)
 #define UART_PADDR	MX28_DUART_BASE_ADDR
 #endif
 

arch/arm/mach-realview/hotplug.c

@@ -69,7 +69,7 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
 		    :
 		    : "memory", "cc");
 
-		if (pen_release == cpu) {
+		if (pen_release == cpu_logical_map(cpu)) {
 			/*
 			 * OK, proper wakeup, we're done
 			 */

arch/arm/mach-realview/include/mach/debug-macro.S

@@ -10,23 +10,10 @@
  * published by the Free Software Foundation.
  */
 
-#if defined(CONFIG_MACH_REALVIEW_EB) || \
-    defined(CONFIG_MACH_REALVIEW_PB11MP) || \
-    defined(CONFIG_MACH_REALVIEW_PBA8) || \
-    defined(CONFIG_MACH_REALVIEW_PBX)
-#ifndef DEBUG_LL_UART_OFFSET
+#ifdef CONFIG_DEBUG_REALVIEW_STD_PORT
 #define DEBUG_LL_UART_OFFSET	0x00009000
-#elif DEBUG_LL_UART_OFFSET != 0x00009000
-#warning "DEBUG_LL_UART_OFFSET already defined to a different value"
-#endif
-#endif
-
-#ifdef CONFIG_MACH_REALVIEW_PB1176
-#ifndef DEBUG_LL_UART_OFFSET
+#elif defined(CONFIG_DEBUG_REALVIEW_PB1176_PORT)
 #define DEBUG_LL_UART_OFFSET	0x0010c000
-#elif DEBUG_LL_UART_OFFSET != 0x0010c000
-#warning "DEBUG_LL_UART_OFFSET already defined to a different value"
-#endif
 #endif
 
 #ifndef DEBUG_LL_UART_OFFSET

arch/arm/mach-shmobile/smp-sh73a0.c

@@ -74,6 +74,8 @@ void __cpuinit sh73a0_secondary_init(unsigned int cpu)
 
 int __cpuinit sh73a0_boot_secondary(unsigned int cpu)
 {
+	cpu = cpu_logical_map(cpu);
+
 	/* enable cache coherency */
 	modify_scu_cpu_psr(0, 3 << (cpu * 8));
 
@@ -87,6 +89,8 @@ int __cpuinit sh73a0_boot_secondary(unsigned int cpu)
 
 void __init sh73a0_smp_prepare_cpus(void)
 {
+	int cpu = cpu_logical_map(0);
+
 	scu_enable(scu_base_addr());
 
 	/* Map the reset vector (in headsmp.S) */
@@ -94,5 +98,5 @@ void __init sh73a0_smp_prepare_cpus(void)
 	__raw_writel(__pa(shmobile_secondary_vector), __io(SBAR));
 
 	/* enable cache coherency on CPU0 */
-	modify_scu_cpu_psr(0, 3 << (0 * 8));
+	modify_scu_cpu_psr(0, 3 << (cpu * 8));
 }

arch/arm/mach-ux500/hotplug.c

@@ -24,7 +24,7 @@ static inline void platform_do_lowpower(unsigned int cpu)
 	for (;;) {
 		__asm__ __volatile__("dsb\n\t" "wfi\n\t"
 				: : : "memory");
-		if (pen_release == cpu) {
+		if (pen_release == cpu_logical_map(cpu)) {
 			/*
 			 * OK, proper wakeup, we're done
 			 */

arch/arm/mach-ux500/platsmp.c

@@ -96,7 +96,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 	 * the holding pen - release it, then wait for it to flag
 	 * that it has been released by resetting pen_release.
 	 */
-	write_pen_release(cpu);
+	write_pen_release(cpu_logical_map(cpu));
 
 	gic_raise_softirq(cpumask_of(cpu), 1);
 

arch/arm/mach-vexpress/hotplug.c

@@ -65,7 +65,7 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
 	for (;;) {
 		wfi();
 
-		if (pen_release == cpu) {
+		if (pen_release == cpu_logical_map(cpu)) {
 			/*
 			 * OK, proper wakeup, we're done
 			 */

arch/arm/plat-mxc/include/mach/debug-macro.S

@@ -12,43 +12,17 @@
  */
 #include <mach/hardware.h>
 
-#ifdef CONFIG_SOC_IMX1
+#ifdef CONFIG_DEBUG_IMX1_UART
 #define UART_PADDR	MX1_UART1_BASE_ADDR
-#endif
-
-#ifdef CONFIG_SOC_IMX25
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#elif defined (CONFIG_DEBUG_IMX25_UART)
 #define UART_PADDR	MX25_UART1_BASE_ADDR
-#endif
-
-#if defined(CONFIG_SOC_IMX21) || defined (CONFIG_SOC_IMX27)
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#elif defined (CONFIG_DEBUG_IMX21_IMX27_UART)
 #define UART_PADDR	MX2x_UART1_BASE_ADDR
-#endif
-
-#if defined(CONFIG_SOC_IMX31) || defined(CONFIG_SOC_IMX35)
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#elif defined (CONFIG_DEBUG_IMX31_IMX35_UART)
 #define UART_PADDR	MX3x_UART1_BASE_ADDR
-#endif
-
-#ifdef CONFIG_SOC_IMX51
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#elif defined (CONFIG_DEBUG_IMX51_UART)
 #define UART_PADDR	MX51_UART1_BASE_ADDR
-#endif
-
-/* iMX50/53 have same addresses, but not iMX51 */
-#if defined(CONFIG_SOC_IMX50) || defined(CONFIG_SOC_IMX53)
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#elif defined (CONFIG_DEBUG_IMX50_IMX53_UART)
 #define UART_PADDR	MX53_UART1_BASE_ADDR
 #endif
 

arch/arm/plat-samsung/Kconfig

@@ -362,4 +362,11 @@ config SAMSUNG_PD
 	help
 	  Say Y here if you want to control Power Domain by Runtime PM.
 
+config DEBUG_S3C_UART
+	depends on PLAT_SAMSUNG
+	int
+	default "0" if DEBUG_S3C_UART0
+	default "1" if DEBUG_S3C_UART1
+	default "2" if DEBUG_S3C_UART2
+
 endif

arch/arm/plat-versatile/platsmp.c

@@ -77,7 +77,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 	 * since we haven't sent them a soft interrupt, they shouldn't
 	 * be there.
 	 */
-	write_pen_release(cpu);
+	write_pen_release(cpu_logical_map(cpu));
 
 	/*
 	 * Send the secondary CPU a soft interrupt, thereby causing