drm/vc4: Fix pitch setup for T-format scanout.

The documentation said to use src_w here, and I didn't consider that
we actually needed to be using pitch somewhere in our setup.  Fixes
scanout on my DSI panel when X11 does initial setup with 1920x1080
HDMI and 800x480 DSI both at 0,0 of the same framebuffer.

v2: Add some comments requested by Boris
Signed-off-by: NEric Anholt <eric@anholt.net>
Fixes: 98830d91 ("drm/vc4: Add T-format scanout support.")
Link: https://patchwork.freedesktop.org/patch/msgid/20170927193209.11870-1-eric@anholt.netReviewed-by: NBoris Brezillon <boris.brezillon@free-electrons.com>

drivers/gpu/drm/vc4/vc4_plane.c

@@ -547,14 +547,24 @@ static int vc4_plane_mode_set(struct drm_plane *plane,
 		tiling = SCALER_CTL0_TILING_LINEAR;
 		pitch0 = VC4_SET_FIELD(fb->pitches[0], SCALER_SRC_PITCH);
 		break;
-	case DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED:
+
+	case DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED: {
+		/* For T-tiled, the FB pitch is "how many bytes from
+		 * one row to the next, such that pitch * tile_h ==
+		 * tile_size * tiles_per_row."
+		 */
+		u32 tile_size_shift = 12; /* T tiles are 4kb */
+		u32 tile_h_shift = 5; /* 16 and 32bpp are 32 pixels high */
+		u32 tiles_w = fb->pitches[0] >> (tile_size_shift - tile_h_shift);
+
 		tiling = SCALER_CTL0_TILING_256B_OR_T;
 
-		pitch0 = (VC4_SET_FIELD(0, SCALER_PITCH0_TILE_Y_OFFSET),
-			  VC4_SET_FIELD(0, SCALER_PITCH0_TILE_WIDTH_L),
-			  VC4_SET_FIELD((vc4_state->src_w[0] + 31) >> 5,
-					SCALER_PITCH0_TILE_WIDTH_R));
+		pitch0 = (VC4_SET_FIELD(0, SCALER_PITCH0_TILE_Y_OFFSET) |
+			  VC4_SET_FIELD(0, SCALER_PITCH0_TILE_WIDTH_L) |
+			  VC4_SET_FIELD(tiles_w, SCALER_PITCH0_TILE_WIDTH_R));
 		break;
+	}
+
 	default:
 		DRM_DEBUG_KMS("Unsupported FB tiling flag 0x%16llx",
 			      (long long)fb->modifier);