提交 64e3bbc7 编写于 作者: L Linus Torvalds

Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 - a short branch of OMAP fixes that we didn't merge before the window
   opened.
 - a small cleanup that sorts the rk3288 dts entries properly
 - a build fix due to a reference to a removed DT node on exynos

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: dts: exynos5420: remove disp_pd
  ARM: EXYNOS: Fix suspend/resume sequences
  ARM: dts: Fix the sort ordering of EHCI and HSIC in rk3288.dtsi
  ARM: OMAP3: Fix coding style problems in arch/arm/mach-omap2/control.c
  ARM: OMAP3: Fix choice of omap3_restore_es function in OMAP34XX rev3.1.2 case.
  ARM: OMAP2+: clock: allow omap2_dpll_round_rate() to round to next-lowest rate
......@@ -525,7 +525,6 @@
compatible = "samsung,exynos5410-mipi-dsi";
reg = <0x14500000 0x10000>;
interrupts = <0 82 0>;
samsung,power-domain = <&disp_pd>;
phys = <&mipi_phy 1>;
phy-names = "dsim";
clocks = <&clock CLK_DSIM1>, <&clock CLK_SCLK_MIPI1>;
......
......@@ -195,6 +195,26 @@
status = "disabled";
};
usb_host0_ehci: usb@ff500000 {
compatible = "generic-ehci";
reg = <0xff500000 0x100>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_USBHOST0>;
clock-names = "usbhost";
status = "disabled";
};
/* NOTE: ohci@ff520000 doesn't actually work on hardware */
usb_hsic: usb@ff5c0000 {
compatible = "generic-ehci";
reg = <0xff5c0000 0x100>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_HSIC>;
clock-names = "usbhost";
status = "disabled";
};
i2c0: i2c@ff650000 {
compatible = "rockchip,rk3288-i2c";
reg = <0xff650000 0x1000>;
......@@ -251,26 +271,6 @@
status = "disabled";
};
usb_host0_ehci: usb@ff500000 {
compatible = "generic-ehci";
reg = <0xff500000 0x100>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_USBHOST0>;
clock-names = "usbhost";
status = "disabled";
};
/* NOTE: ohci@ff520000 doesn't actually work on hardware */
usb_hsic: usb@ff5c0000 {
compatible = "generic-ehci";
reg = <0xff5c0000 0x100>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_HSIC>;
clock-names = "usbhost";
status = "disabled";
};
gic: interrupt-controller@ffc01000 {
compatible = "arm,gic-400";
interrupt-controller;
......
......@@ -114,26 +114,6 @@ static int exynos_irq_set_wake(struct irq_data *data, unsigned int state)
#define S5P_CHECK_AFTR 0xFCBA0D10
#define S5P_CHECK_SLEEP 0x00000BAD
/* Ext-GIC nIRQ/nFIQ is the only wakeup source in AFTR */
static void exynos_set_wakeupmask(long mask)
{
pmu_raw_writel(mask, S5P_WAKEUP_MASK);
}
static void exynos_cpu_set_boot_vector(long flags)
{
__raw_writel(virt_to_phys(exynos_cpu_resume), EXYNOS_BOOT_VECTOR_ADDR);
__raw_writel(flags, EXYNOS_BOOT_VECTOR_FLAG);
}
void exynos_enter_aftr(void)
{
exynos_set_wakeupmask(0x0000ff3e);
exynos_cpu_set_boot_vector(S5P_CHECK_AFTR);
/* Set value of power down register for aftr mode */
exynos_sys_powerdown_conf(SYS_AFTR);
}
/* For Cortex-A9 Diagnostic and Power control register */
static unsigned int save_arm_register[2];
......@@ -173,6 +153,82 @@ static void exynos_cpu_restore_register(void)
: "cc");
}
static void exynos_pm_central_suspend(void)
{
unsigned long tmp;
/* Setting Central Sequence Register for power down mode */
tmp = pmu_raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
pmu_raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
}
static int exynos_pm_central_resume(void)
{
unsigned long tmp;
/*
* If PMU failed while entering sleep mode, WFI will be
* ignored by PMU and then exiting cpu_do_idle().
* S5P_CENTRAL_LOWPWR_CFG bit will not be set automatically
* in this situation.
*/
tmp = pmu_raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
if (!(tmp & S5P_CENTRAL_LOWPWR_CFG)) {
tmp |= S5P_CENTRAL_LOWPWR_CFG;
pmu_raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
/* clear the wakeup state register */
pmu_raw_writel(0x0, S5P_WAKEUP_STAT);
/* No need to perform below restore code */
return -1;
}
return 0;
}
/* Ext-GIC nIRQ/nFIQ is the only wakeup source in AFTR */
static void exynos_set_wakeupmask(long mask)
{
pmu_raw_writel(mask, S5P_WAKEUP_MASK);
}
static void exynos_cpu_set_boot_vector(long flags)
{
__raw_writel(virt_to_phys(exynos_cpu_resume), EXYNOS_BOOT_VECTOR_ADDR);
__raw_writel(flags, EXYNOS_BOOT_VECTOR_FLAG);
}
static int exynos_aftr_finisher(unsigned long flags)
{
exynos_set_wakeupmask(0x0000ff3e);
exynos_cpu_set_boot_vector(S5P_CHECK_AFTR);
/* Set value of power down register for aftr mode */
exynos_sys_powerdown_conf(SYS_AFTR);
cpu_do_idle();
return 1;
}
void exynos_enter_aftr(void)
{
cpu_pm_enter();
exynos_pm_central_suspend();
if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
exynos_cpu_save_register();
cpu_suspend(0, exynos_aftr_finisher);
if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) {
scu_enable(S5P_VA_SCU);
exynos_cpu_restore_register();
}
exynos_pm_central_resume();
cpu_pm_exit();
}
static int exynos_cpu_suspend(unsigned long arg)
{
#ifdef CONFIG_CACHE_L2X0
......@@ -217,16 +273,6 @@ static void exynos_pm_prepare(void)
pmu_raw_writel(virt_to_phys(exynos_cpu_resume), S5P_INFORM0);
}
static void exynos_pm_central_suspend(void)
{
unsigned long tmp;
/* Setting Central Sequence Register for power down mode */
tmp = pmu_raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
pmu_raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
}
static int exynos_pm_suspend(void)
{
unsigned long tmp;
......@@ -244,29 +290,6 @@ static int exynos_pm_suspend(void)
return 0;
}
static int exynos_pm_central_resume(void)
{
unsigned long tmp;
/*
* If PMU failed while entering sleep mode, WFI will be
* ignored by PMU and then exiting cpu_do_idle().
* S5P_CENTRAL_LOWPWR_CFG bit will not be set automatically
* in this situation.
*/
tmp = pmu_raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
if (!(tmp & S5P_CENTRAL_LOWPWR_CFG)) {
tmp |= S5P_CENTRAL_LOWPWR_CFG;
pmu_raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
/* clear the wakeup state register */
pmu_raw_writel(0x0, S5P_WAKEUP_STAT);
/* No need to perform below restore code */
return -1;
}
return 0;
}
static void exynos_pm_resume(void)
{
if (exynos_pm_central_resume())
......@@ -369,44 +392,10 @@ static const struct platform_suspend_ops exynos_suspend_ops = {
.valid = suspend_valid_only_mem,
};
static int exynos_cpu_pm_notifier(struct notifier_block *self,
unsigned long cmd, void *v)
{
int cpu = smp_processor_id();
switch (cmd) {
case CPU_PM_ENTER:
if (cpu == 0) {
exynos_pm_central_suspend();
if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
exynos_cpu_save_register();
}
break;
case CPU_PM_EXIT:
if (cpu == 0) {
if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) {
scu_enable(S5P_VA_SCU);
exynos_cpu_restore_register();
}
exynos_pm_central_resume();
}
break;
}
return NOTIFY_OK;
}
static struct notifier_block exynos_cpu_pm_notifier_block = {
.notifier_call = exynos_cpu_pm_notifier,
};
void __init exynos_pm_init(void)
{
u32 tmp;
cpu_pm_register_notifier(&exynos_cpu_pm_notifier_block);
/* Platform-specific GIC callback */
gic_arch_extn.irq_set_wake = exynos_irq_set_wake;
......
......@@ -285,10 +285,13 @@ long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
{
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
int m, n, r, scaled_max_m;
int min_delta_m = INT_MAX, min_delta_n = INT_MAX;
unsigned long scaled_rt_rp;
unsigned long new_rate = 0;
struct dpll_data *dd;
unsigned long ref_rate;
long delta;
long prev_min_delta = LONG_MAX;
const char *clk_name;
if (!clk || !clk->dpll_data)
......@@ -334,23 +337,34 @@ long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
if (r == DPLL_MULT_UNDERFLOW)
continue;
/* skip rates above our target rate */
delta = target_rate - new_rate;
if (delta < 0)
continue;
if (delta < prev_min_delta) {
prev_min_delta = delta;
min_delta_m = m;
min_delta_n = n;
}
pr_debug("clock: %s: m = %d: n = %d: new_rate = %lu\n",
clk_name, m, n, new_rate);
if (target_rate == new_rate) {
dd->last_rounded_m = m;
dd->last_rounded_n = n;
dd->last_rounded_rate = target_rate;
if (delta == 0)
break;
}
}
if (target_rate != new_rate) {
if (prev_min_delta == LONG_MAX) {
pr_debug("clock: %s: cannot round to rate %lu\n",
clk_name, target_rate);
return ~0;
}
return target_rate;
dd->last_rounded_m = min_delta_m;
dd->last_rounded_n = min_delta_n;
dd->last_rounded_rate = target_rate - prev_min_delta;
return dd->last_rounded_rate;
}
......@@ -280,6 +280,7 @@ void omap3_clear_scratchpad_contents(void)
u32 max_offset = OMAP343X_SCRATCHPAD_ROM_OFFSET;
void __iomem *v_addr;
u32 offset = 0;
v_addr = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD_ROM);
if (omap3xxx_prm_clear_global_cold_reset()) {
for ( ; offset <= max_offset; offset += 0x4)
......@@ -309,7 +310,8 @@ void omap3_save_scratchpad_contents(void)
scratchpad_contents.public_restore_ptr =
virt_to_phys(omap3_restore_3630);
else if (omap_rev() != OMAP3430_REV_ES3_0 &&
omap_rev() != OMAP3430_REV_ES3_1)
omap_rev() != OMAP3430_REV_ES3_1 &&
omap_rev() != OMAP3430_REV_ES3_1_2)
scratchpad_contents.public_restore_ptr =
virt_to_phys(omap3_restore);
else
......@@ -463,7 +465,6 @@ void omap3_control_save_context(void)
control_context.csi = omap_ctrl_readl(OMAP343X_CONTROL_CSI);
control_context.padconf_sys_nirq =
omap_ctrl_readl(OMAP343X_CONTROL_PADCONF_SYSNIRQ);
return;
}
void omap3_control_restore_context(void)
......@@ -521,7 +522,6 @@ void omap3_control_restore_context(void)
omap_ctrl_writel(control_context.csi, OMAP343X_CONTROL_CSI);
omap_ctrl_writel(control_context.padconf_sys_nirq,
OMAP343X_CONTROL_PADCONF_SYSNIRQ);
return;
}
void omap3630_ctrl_disable_rta(void)
......
......@@ -475,6 +475,7 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
{
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
struct clk *new_parent = NULL;
unsigned long rrate;
u16 freqsel = 0;
struct dpll_data *dd;
int ret;
......@@ -502,8 +503,16 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
__clk_prepare(dd->clk_ref);
clk_enable(dd->clk_ref);
if (dd->last_rounded_rate != rate)
rate = __clk_round_rate(hw->clk, rate);
/* XXX this check is probably pointless in the CCF context */
if (dd->last_rounded_rate != rate) {
rrate = __clk_round_rate(hw->clk, rate);
if (rrate != rate) {
pr_warn("%s: %s: final rate %lu does not match desired rate %lu\n",
__func__, __clk_get_name(hw->clk),
rrate, rate);
rate = rrate;
}
}
if (dd->last_rounded_rate == 0)
return -EINVAL;
......
......@@ -20,25 +20,6 @@
static void (*exynos_enter_aftr)(void);
static int idle_finisher(unsigned long flags)
{
exynos_enter_aftr();
cpu_do_idle();
return 1;
}
static int exynos_enter_core0_aftr(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index)
{
cpu_pm_enter();
cpu_suspend(0, idle_finisher);
cpu_pm_exit();
return index;
}
static int exynos_enter_lowpower(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index)
......@@ -51,8 +32,10 @@ static int exynos_enter_lowpower(struct cpuidle_device *dev,
if (new_index == 0)
return arm_cpuidle_simple_enter(dev, drv, new_index);
else
return exynos_enter_core0_aftr(dev, drv, new_index);
exynos_enter_aftr();
return new_index;
}
static struct cpuidle_driver exynos_idle_driver = {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册