WAN pc300too.c: Fix PC300-X.21 detection

pc300too driver works around a bug in PCI9050 bridge.  Unfortunately
it was doing that too late.
Signed-off-by: NKrzysztof Hałasa <khc@pm.waw.pl>

drivers/net/wan/pc300too.c

@@ -319,27 +319,6 @@ static int __devinit pc300_pci_init_one(struct pci_dev *pdev,
 	}
 	pci_set_drvdata(pdev, card);
 
-	if (pdev->device == PCI_DEVICE_ID_PC300_TE_1 ||
-	    pdev->device == PCI_DEVICE_ID_PC300_TE_2)
-		card->type = PC300_TE; /* not fully supported */
-	else if (card->init_ctrl_value & PC300_CTYPE_MASK)
-		card->type = PC300_X21;
-	else
-		card->type = PC300_RSV;
-
-	if (pdev->device == PCI_DEVICE_ID_PC300_RX_1 ||
-	    pdev->device == PCI_DEVICE_ID_PC300_TE_1)
-		card->n_ports = 1;
-	else
-		card->n_ports = 2;
-
-	for (i = 0; i < card->n_ports; i++)
-		if (!(card->ports[i].netdev = alloc_hdlcdev(&card->ports[i]))) {
-			printk(KERN_ERR "pc300: unable to allocate memory\n");
-			pc300_pci_remove_one(pdev);
-			return -ENOMEM;
-		}
-
 	if (pci_resource_len(pdev, 0) != PC300_PLX_SIZE ||
 	    pci_resource_len(pdev, 2) != PC300_SCA_SIZE ||
 	    pci_resource_len(pdev, 3) < 16384) {
@@ -348,13 +327,13 @@ static int __devinit pc300_pci_init_one(struct pci_dev *pdev,
 		return -EFAULT;
 	}
 
-	plxphys = pci_resource_start(pdev,0) & PCI_BASE_ADDRESS_MEM_MASK;
+	plxphys = pci_resource_start(pdev, 0) & PCI_BASE_ADDRESS_MEM_MASK;
 	card->plxbase = ioremap(plxphys, PC300_PLX_SIZE);
 
-	scaphys = pci_resource_start(pdev,2) & PCI_BASE_ADDRESS_MEM_MASK;
+	scaphys = pci_resource_start(pdev, 2) & PCI_BASE_ADDRESS_MEM_MASK;
 	card->scabase = ioremap(scaphys, PC300_SCA_SIZE);
 
-	ramphys = pci_resource_start(pdev,3) & PCI_BASE_ADDRESS_MEM_MASK;
+	ramphys = pci_resource_start(pdev, 3) & PCI_BASE_ADDRESS_MEM_MASK;
 	card->rambase = pci_ioremap_bar(pdev, 3);
 
 	if (card->plxbase == NULL ||
@@ -369,6 +348,27 @@ static int __devinit pc300_pci_init_one(struct pci_dev *pdev,
 	card->init_ctrl_value = readl(&((plx9050 __iomem *)card->scabase)->init_ctrl);
 	pci_write_config_dword(pdev, PCI_BASE_ADDRESS_0, plxphys);
 
+	if (pdev->device == PCI_DEVICE_ID_PC300_TE_1 ||
+	    pdev->device == PCI_DEVICE_ID_PC300_TE_2)
+		card->type = PC300_TE; /* not fully supported */
+	else if (card->init_ctrl_value & PC300_CTYPE_MASK)
+		card->type = PC300_X21;
+	else
+		card->type = PC300_RSV;
+
+	if (pdev->device == PCI_DEVICE_ID_PC300_RX_1 ||
+	    pdev->device == PCI_DEVICE_ID_PC300_TE_1)
+		card->n_ports = 1;
+	else
+		card->n_ports = 2;
+
+	for (i = 0; i < card->n_ports; i++)
+		if (!(card->ports[i].netdev = alloc_hdlcdev(&card->ports[i]))) {
+			printk(KERN_ERR "pc300: unable to allocate memory\n");
+			pc300_pci_remove_one(pdev);
+			return -ENOMEM;
+		}
+
 	/* Reset PLX */
 	p = &card->plxbase->init_ctrl;
 	writel(card->init_ctrl_value | 0x40000000, p);