e1000: Add support for new hardware (ESB2)

Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: NJohn Ronciak <john.ronciak@intel.com>

drivers/net/e1000/e1000_ethtool.c

@@ -589,6 +589,7 @@ e1000_get_drvinfo(struct net_device *netdev,
 	case e1000_82571:
 	case e1000_82572:
 	case e1000_82573:
+	case e1000_80003es2lan:
 		sprintf(firmware_version, "%d.%d-%d",
 			(eeprom_data & 0xF000) >> 12,
 			(eeprom_data & 0x0FF0) >> 4,
@@ -762,6 +763,7 @@ e1000_reg_test(struct e1000_adapter *adapter, uint64_t *data)
 	/* there are several bits on newer hardware that are r/w */
 	case e1000_82571:
 	case e1000_82572:
+	case e1000_80003es2lan:
 		toggle = 0x7FFFF3FF;
 		break;
 	case e1000_82573:
@@ -1320,6 +1322,7 @@ e1000_set_phy_loopback(struct e1000_adapter *adapter)
 	case e1000_82571:
 	case e1000_82572:
 	case e1000_82573:
+	case e1000_80003es2lan:
 		return e1000_integrated_phy_loopback(adapter);
 		break;
 

drivers/net/e1000/e1000_main.c

@@ -157,9 +157,12 @@ static struct pci_device_id e1000_pci_tbl[] = {
 	INTEL_E1000_ETHERNET_DEVICE(0x108A),
 	INTEL_E1000_ETHERNET_DEVICE(0x108B),
 	INTEL_E1000_ETHERNET_DEVICE(0x108C),
+	INTEL_E1000_ETHERNET_DEVICE(0x1096),
+	INTEL_E1000_ETHERNET_DEVICE(0x1098),
 	INTEL_E1000_ETHERNET_DEVICE(0x1099),
 	INTEL_E1000_ETHERNET_DEVICE(0x109A),
 	INTEL_E1000_ETHERNET_DEVICE(0x10B5),
+	INTEL_E1000_ETHERNET_DEVICE(0x10B9),
 	/* required last entry */
 	{0,}
 };
@@ -575,6 +578,7 @@ e1000_reset(struct e1000_adapter *adapter)
 		break;
 	case e1000_82571:
 	case e1000_82572:
+	case e1000_80003es2lan:
 		pba = E1000_PBA_38K;
 		break;
 	case e1000_82573:
@@ -852,6 +856,7 @@ e1000_probe(struct pci_dev *pdev,
 	case e1000_82546:
 	case e1000_82546_rev_3:
 	case e1000_82571:
+	case e1000_80003es2lan:
 		if (E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_FUNC_1){
 			e1000_read_eeprom(&adapter->hw,
 				EEPROM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);