提交 636e19a3 编写于 作者: J John Fastabend 提交者: David S. Miller

net: consolidate 8021q tagging

Now that VLAN packets are tagged in dev_hard_start_xmit()
at the bottom of the stack we no longer need to tag them
in the 8021Q module (Except in the !VLAN_FLAG_REORDER_HDR
case).

This allows the accel path and non accel paths to be consolidated.
Here the vlan_tci in the skb is always set and we allow the
stack to add the actual tag in dev_hard_start_xmit().
Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com>
Acked-by: NJesse Gross <jesse@nicira.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 8f5549f3
......@@ -45,8 +45,6 @@ struct vlan_rx_stats {
* @real_dev: underlying netdevice
* @real_dev_addr: address of underlying netdevice
* @dent: proc dir entry
* @cnt_inc_headroom_on_tx: statistic - number of skb expansions on TX
* @cnt_encap_on_xmit: statistic - number of skb encapsulations on TX
* @vlan_rx_stats: ptr to percpu rx stats
*/
struct vlan_dev_info {
......@@ -62,8 +60,6 @@ struct vlan_dev_info {
unsigned char real_dev_addr[ETH_ALEN];
struct proc_dir_entry *dent;
unsigned long cnt_inc_headroom_on_tx;
unsigned long cnt_encap_on_xmit;
struct vlan_rx_stats __percpu *vlan_rx_stats;
};
......
......@@ -323,24 +323,12 @@ static netdev_tx_t vlan_dev_hard_start_xmit(struct sk_buff *skb,
*/
if (veth->h_vlan_proto != htons(ETH_P_8021Q) ||
vlan_dev_info(dev)->flags & VLAN_FLAG_REORDER_HDR) {
unsigned int orig_headroom = skb_headroom(skb);
u16 vlan_tci;
vlan_dev_info(dev)->cnt_encap_on_xmit++;
vlan_tci = vlan_dev_info(dev)->vlan_id;
vlan_tci |= vlan_dev_get_egress_qos_mask(dev, skb);
skb = __vlan_put_tag(skb, vlan_tci);
if (!skb) {
txq->tx_dropped++;
return NETDEV_TX_OK;
}
if (orig_headroom < VLAN_HLEN)
vlan_dev_info(dev)->cnt_inc_headroom_on_tx++;
skb = __vlan_hwaccel_put_tag(skb, vlan_tci);
}
skb_set_dev(skb, vlan_dev_info(dev)->real_dev);
len = skb->len;
ret = dev_queue_xmit(skb);
......@@ -354,32 +342,6 @@ static netdev_tx_t vlan_dev_hard_start_xmit(struct sk_buff *skb,
return ret;
}
static netdev_tx_t vlan_dev_hwaccel_hard_start_xmit(struct sk_buff *skb,
struct net_device *dev)
{
int i = skb_get_queue_mapping(skb);
struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
u16 vlan_tci;
unsigned int len;
int ret;
vlan_tci = vlan_dev_info(dev)->vlan_id;
vlan_tci |= vlan_dev_get_egress_qos_mask(dev, skb);
skb = __vlan_hwaccel_put_tag(skb, vlan_tci);
skb->dev = vlan_dev_info(dev)->real_dev;
len = skb->len;
ret = dev_queue_xmit(skb);
if (likely(ret == NET_XMIT_SUCCESS || ret == NET_XMIT_CN)) {
txq->tx_packets++;
txq->tx_bytes += len;
} else
txq->tx_dropped++;
return ret;
}
static u16 vlan_dev_select_queue(struct net_device *dev, struct sk_buff *skb)
{
struct net_device *rdev = vlan_dev_info(dev)->real_dev;
......@@ -716,8 +678,7 @@ static const struct header_ops vlan_header_ops = {
.parse = eth_header_parse,
};
static const struct net_device_ops vlan_netdev_ops, vlan_netdev_accel_ops,
vlan_netdev_ops_sq, vlan_netdev_accel_ops_sq;
static const struct net_device_ops vlan_netdev_ops, vlan_netdev_ops_sq;
static int vlan_dev_init(struct net_device *dev)
{
......@@ -752,19 +713,16 @@ static int vlan_dev_init(struct net_device *dev)
if (real_dev->features & NETIF_F_HW_VLAN_TX) {
dev->header_ops = real_dev->header_ops;
dev->hard_header_len = real_dev->hard_header_len;
if (real_dev->netdev_ops->ndo_select_queue)
dev->netdev_ops = &vlan_netdev_accel_ops_sq;
else
dev->netdev_ops = &vlan_netdev_accel_ops;
} else {
dev->header_ops = &vlan_header_ops;
dev->hard_header_len = real_dev->hard_header_len + VLAN_HLEN;
if (real_dev->netdev_ops->ndo_select_queue)
dev->netdev_ops = &vlan_netdev_ops_sq;
else
dev->netdev_ops = &vlan_netdev_ops;
}
if (real_dev->netdev_ops->ndo_select_queue)
dev->netdev_ops = &vlan_netdev_ops_sq;
else
dev->netdev_ops = &vlan_netdev_ops;
if (is_vlan_dev(real_dev))
subclass = 1;
......@@ -905,30 +863,6 @@ static const struct net_device_ops vlan_netdev_ops = {
#endif
};
static const struct net_device_ops vlan_netdev_accel_ops = {
.ndo_change_mtu = vlan_dev_change_mtu,
.ndo_init = vlan_dev_init,
.ndo_uninit = vlan_dev_uninit,
.ndo_open = vlan_dev_open,
.ndo_stop = vlan_dev_stop,
.ndo_start_xmit = vlan_dev_hwaccel_hard_start_xmit,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_mac_address = vlan_dev_set_mac_address,
.ndo_set_rx_mode = vlan_dev_set_rx_mode,
.ndo_set_multicast_list = vlan_dev_set_rx_mode,
.ndo_change_rx_flags = vlan_dev_change_rx_flags,
.ndo_do_ioctl = vlan_dev_ioctl,
.ndo_neigh_setup = vlan_dev_neigh_setup,
.ndo_get_stats64 = vlan_dev_get_stats64,
#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE)
.ndo_fcoe_ddp_setup = vlan_dev_fcoe_ddp_setup,
.ndo_fcoe_ddp_done = vlan_dev_fcoe_ddp_done,
.ndo_fcoe_enable = vlan_dev_fcoe_enable,
.ndo_fcoe_disable = vlan_dev_fcoe_disable,
.ndo_fcoe_get_wwn = vlan_dev_fcoe_get_wwn,
#endif
};
static const struct net_device_ops vlan_netdev_ops_sq = {
.ndo_select_queue = vlan_dev_select_queue,
.ndo_change_mtu = vlan_dev_change_mtu,
......@@ -954,31 +888,6 @@ static const struct net_device_ops vlan_netdev_ops_sq = {
#endif
};
static const struct net_device_ops vlan_netdev_accel_ops_sq = {
.ndo_select_queue = vlan_dev_select_queue,
.ndo_change_mtu = vlan_dev_change_mtu,
.ndo_init = vlan_dev_init,
.ndo_uninit = vlan_dev_uninit,
.ndo_open = vlan_dev_open,
.ndo_stop = vlan_dev_stop,
.ndo_start_xmit = vlan_dev_hwaccel_hard_start_xmit,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_mac_address = vlan_dev_set_mac_address,
.ndo_set_rx_mode = vlan_dev_set_rx_mode,
.ndo_set_multicast_list = vlan_dev_set_rx_mode,
.ndo_change_rx_flags = vlan_dev_change_rx_flags,
.ndo_do_ioctl = vlan_dev_ioctl,
.ndo_neigh_setup = vlan_dev_neigh_setup,
.ndo_get_stats64 = vlan_dev_get_stats64,
#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE)
.ndo_fcoe_ddp_setup = vlan_dev_fcoe_ddp_setup,
.ndo_fcoe_ddp_done = vlan_dev_fcoe_ddp_done,
.ndo_fcoe_enable = vlan_dev_fcoe_enable,
.ndo_fcoe_disable = vlan_dev_fcoe_disable,
.ndo_fcoe_get_wwn = vlan_dev_fcoe_get_wwn,
#endif
};
void vlan_setup(struct net_device *dev)
{
ether_setup(dev);
......
......@@ -299,10 +299,6 @@ static int vlandev_seq_show(struct seq_file *seq, void *offset)
seq_puts(seq, "\n");
seq_printf(seq, fmt64, "total frames transmitted", stats->tx_packets);
seq_printf(seq, fmt64, "total bytes transmitted", stats->tx_bytes);
seq_printf(seq, fmt, "total headroom inc",
dev_info->cnt_inc_headroom_on_tx);
seq_printf(seq, fmt, "total encap on xmit",
dev_info->cnt_encap_on_xmit);
seq_printf(seq, "Device: %s", dev_info->real_dev->name);
/* now show all PRIORITY mappings relating to this VLAN */
seq_printf(seq, "\nINGRESS priority mappings: "
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册