提交 630fe9b6 编写于 作者: T Tomas Winkler 提交者: John W. Linville

iwlwifi: refactor setting tx power

This patch
1. Refactors settings of tx power
2. enables iwconfig txpower <value>
3. adds 5000 HW tx power
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NZhu Yi <yi.zhu@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 25a6572c
......@@ -46,6 +46,8 @@
#include "iwl-calib.h"
#include "iwl-sta.h"
static int iwl4965_send_tx_power(struct iwl_priv *priv);
/* module parameters */
static struct iwl_mod_params iwl4965_mod_params = {
.num_of_queues = IWL49_NUM_QUEUES,
......@@ -737,7 +739,7 @@ static void iwl4965_bg_txpower_work(struct work_struct *work)
/* Regardless of if we are assocaited, we must reconfigure the
* TX power since frames can be sent on non-radar channels while
* not associated */
iwl4965_hw_reg_send_txpower(priv);
iwl4965_send_tx_power(priv);
/* Update last_temperature to keep is_calib_needed from running
* when it isn't needed... */
......@@ -952,11 +954,6 @@ static int iwl4965_set_power(struct iwl_priv *priv,
cmd, NULL);
return ret;
}
int iwl4965_hw_reg_set_txpower(struct iwl_priv *priv, s8 power)
{
IWL_ERROR("TODO: Implement iwl4965_hw_reg_set_txpower!\n");
return -EINVAL;
}
static s32 iwl4965_math_div_round(s32 num, s32 denom, s32 *res)
{
......@@ -1007,20 +1004,6 @@ static s32 iwl4965_get_voltage_compensation(s32 eeprom_voltage,
return comp;
}
static const struct iwl_channel_info *
iwl4965_get_channel_txpower_info(struct iwl_priv *priv,
enum ieee80211_band band, u16 channel)
{
const struct iwl_channel_info *ch_info;
ch_info = iwl_get_channel_info(priv, band, channel);
if (!is_channel_valid(ch_info))
return NULL;
return ch_info;
}
static s32 iwl4965_get_tx_atten_grp(u16 channel)
{
if (channel >= CALIB_IWL_TX_ATTEN_GR5_FCH &&
......@@ -1444,30 +1427,17 @@ static int iwl4965_fill_txpower_tbl(struct iwl_priv *priv, u8 band, u16 channel,
s32 factory_actual_pwr[2];
s32 power_index;
/* Sanity check requested level (dBm) */
if (priv->user_txpower_limit < IWL_TX_POWER_TARGET_POWER_MIN) {
IWL_WARNING("Requested user TXPOWER %d below limit.\n",
priv->user_txpower_limit);
return -EINVAL;
}
if (priv->user_txpower_limit > IWL_TX_POWER_TARGET_POWER_MAX) {
IWL_WARNING("Requested user TXPOWER %d above limit.\n",
priv->user_txpower_limit);
return -EINVAL;
}
/* user_txpower_limit is in dBm, convert to half-dBm (half-dB units
* are used for indexing into txpower table) */
user_target_power = 2 * priv->user_txpower_limit;
user_target_power = 2 * priv->tx_power_user_lmt;
/* Get current (RXON) channel, band, width */
ch_info =
iwl4965_get_channel_txpower_info(priv, priv->band, channel);
IWL_DEBUG_TXPOWER("chan %d band %d is_fat %d\n", channel, band,
is_fat);
if (!ch_info)
ch_info = iwl_get_channel_info(priv, priv->band, channel);
if (!is_channel_valid(ch_info))
return -EINVAL;
/* get txatten group, used to select 1) thermal txpower adjustment
......@@ -1668,12 +1638,12 @@ static int iwl4965_fill_txpower_tbl(struct iwl_priv *priv, u8 band, u16 channel,
}
/**
* iwl4965_hw_reg_send_txpower - Configure the TXPOWER level user limit
* iwl4965_send_tx_power - Configure the TXPOWER level user limit
*
* Uses the active RXON for channel, band, and characteristics (fat, high)
* The power limit is taken from priv->user_txpower_limit.
* The power limit is taken from priv->tx_power_user_lmt.
*/
int iwl4965_hw_reg_send_txpower(struct iwl_priv *priv)
static int iwl4965_send_tx_power(struct iwl_priv *priv)
{
struct iwl4965_txpowertable_cmd cmd = { 0 };
int ret;
......@@ -3507,6 +3477,7 @@ static struct iwl_lib_ops iwl4965_lib = {
},
.radio_kill_sw = iwl4965_radio_kill_sw,
.set_power = iwl4965_set_power,
.send_tx_power = iwl4965_send_tx_power,
.update_chain_flags = iwl4965_update_chain_flags,
};
......
......@@ -1424,6 +1424,19 @@ static int iwl5000_send_rxon_assoc(struct iwl_priv *priv)
return ret;
}
static int iwl5000_send_tx_power(struct iwl_priv *priv)
{
struct iwl5000_tx_power_dbm_cmd tx_power_cmd;
/* half dBm need to multiply */
tx_power_cmd.global_lmt = (s8)(2 * priv->tx_power_user_lmt);
tx_power_cmd.flags = 0;
tx_power_cmd.srv_chan_lmt = IWL50_TX_POWER_AUTO;
return iwl_send_cmd_pdu_async(priv, REPLY_TX_POWER_DBM_CMD,
sizeof(tx_power_cmd), &tx_power_cmd,
NULL);
}
static struct iwl_hcmd_ops iwl5000_hcmd = {
.rxon_assoc = iwl5000_send_rxon_assoc,
......@@ -1452,6 +1465,7 @@ static struct iwl_lib_ops iwl5000_lib = {
.load_ucode = iwl5000_load_ucode,
.init_alive_start = iwl5000_init_alive_start,
.alive_notify = iwl5000_alive_notify,
.send_tx_power = iwl5000_send_tx_power,
.apm_ops = {
.init = iwl5000_apm_init,
.reset = iwl5000_apm_reset,
......
......@@ -126,6 +126,7 @@ enum {
/* Miscellaneous commands */
QUIET_NOTIFICATION = 0x96, /* not used */
REPLY_TX_PWR_TABLE_CMD = 0x97,
REPLY_TX_POWER_DBM_CMD = 0x98,
MEASURE_ABORT_NOTIFICATION = 0x99, /* not used */
/* Bluetooth device coexistance config command */
......@@ -339,6 +340,17 @@ struct iwl4965_tx_power_db {
struct tx_power_dual_stream power_tbl[POWER_TABLE_NUM_ENTRIES];
} __attribute__ ((packed));
/**
* Commad REPLY_TX_POWER_DBM_CMD = 0x98
* struct iwl5000_tx_power_dbm_cmd
*/
#define IWL50_TX_POWER_AUTO 0x7f
struct iwl5000_tx_power_dbm_cmd {
s8 global_lmt; /*in half-dBm (e.g. 30 = 15 dBm) */
u8 flags;
s8 srv_chan_lmt; /*in half-dBm (e.g. 30 = 15 dBm) */
u8 reserved;
} __attribute__ ((packed));
/******************************************************************************
* (0a)
......
......@@ -480,9 +480,8 @@ static int iwlcore_init_geos(struct iwl_priv *priv)
geo_ch->flags |= ch->fat_extension_channel;
if (ch->max_power_avg > priv->max_channel_txpower_limit)
priv->max_channel_txpower_limit =
ch->max_power_avg;
if (ch->max_power_avg > priv->tx_power_channel_lmt)
priv->tx_power_channel_lmt = ch->max_power_avg;
} else {
geo_ch->flags |= IEEE80211_CHAN_DISABLED;
}
......@@ -832,7 +831,7 @@ int iwl_init_drv(struct iwl_priv *priv)
priv->rates_mask = IWL_RATES_MASK;
/* If power management is turned on, default to AC mode */
priv->power_mode = IWL_POWER_AC;
priv->user_txpower_limit = IWL_DEFAULT_TX_POWER;
priv->tx_power_user_lmt = IWL_TX_POWER_TARGET_POWER_MAX;
ret = iwl_init_channel_map(priv);
if (ret) {
......@@ -871,6 +870,34 @@ void iwl_free_calib_results(struct iwl_priv *priv)
}
EXPORT_SYMBOL(iwl_free_calib_results);
int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force)
{
int ret = 0;
if (tx_power < IWL_TX_POWER_TARGET_POWER_MIN) {
IWL_WARNING("Requested user TXPOWER %d below limit.\n",
priv->tx_power_user_lmt);
return -EINVAL;
}
if (tx_power > IWL_TX_POWER_TARGET_POWER_MAX) {
IWL_WARNING("Requested user TXPOWER %d above limit.\n",
priv->tx_power_user_lmt);
return -EINVAL;
}
if (priv->tx_power_user_lmt != tx_power)
force = true;
priv->tx_power_user_lmt = tx_power;
if (force && priv->cfg->ops->lib->send_tx_power)
ret = priv->cfg->ops->lib->send_tx_power(priv);
return ret;
}
EXPORT_SYMBOL(iwl_set_tx_power);
void iwl_uninit_drv(struct iwl_priv *priv)
{
iwl_free_calib_results(priv);
......@@ -880,6 +907,8 @@ void iwl_uninit_drv(struct iwl_priv *priv)
}
EXPORT_SYMBOL(iwl_uninit_drv);
/* Low level driver call this function to update iwlcore with
* driver status.
*/
......
......@@ -140,6 +140,7 @@ struct iwl_lib_ops {
} apm_ops;
/* power */
int (*set_power)(struct iwl_priv *priv, void *cmd);
int (*send_tx_power) (struct iwl_priv *priv);
void (*update_chain_flags)(struct iwl_priv *priv);
/* eeprom operations (as defined in iwl-eeprom.h) */
struct iwl_eeprom_ops eeprom_ops;
......@@ -237,6 +238,11 @@ int iwl_tx_agg_start(struct iwl_priv *priv, const u8 *ra, u16 tid, u16 *ssn);
int iwl_tx_agg_stop(struct iwl_priv *priv , const u8 *ra, u16 tid);
int iwl_txq_check_empty(struct iwl_priv *priv, int sta_id, u8 tid, int txq_id);
/*****************************************************
* TX power
****************************************************/
int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force);
/*****************************************************
* S e n d i n g H o s t C o m m a n d s *
*****************************************************/
......
......@@ -683,8 +683,6 @@ extern void iwl4965_hw_build_tx_cmd_rate(struct iwl_priv *priv,
struct ieee80211_tx_info *info,
struct ieee80211_hdr *hdr,
int sta_id, int tx_id);
extern int iwl4965_hw_reg_send_txpower(struct iwl_priv *priv);
extern int iwl4965_hw_reg_set_txpower(struct iwl_priv *priv, s8 power);
extern void iwl4965_hw_rx_statistics(struct iwl_priv *priv,
struct iwl_rx_mem_buffer *rxb);
extern void iwl4965_disable_events(struct iwl_priv *priv);
......@@ -1167,10 +1165,9 @@ struct iwl_priv {
struct delayed_work alive_start;
struct delayed_work scan_check;
struct delayed_work post_associate;
#define IWL_DEFAULT_TX_POWER 0x0F
s8 user_txpower_limit;
s8 max_channel_txpower_limit;
/* TX Power */
s8 tx_power_user_lmt;
s8 tx_power_channel_lmt;
#ifdef CONFIG_PM
u32 pm_state[16];
......
......@@ -382,8 +382,8 @@ static int iwl_set_fat_chan_info(struct iwl_priv *priv,
if (!is_channel_valid(ch_info))
return -1;
IWL_DEBUG_INFO("FAT Ch. %d [%sGHz] %s%s%s%s%s(0x%02x"
" %ddBm): Ad-Hoc %ssupported\n",
IWL_DEBUG_INFO("FAT Ch. %d [%sGHz] %s%s%s%s%s(0x%02x %ddBm):"
" Ad-Hoc %ssupported\n",
ch_info->channel,
is_channel_a_band(ch_info) ?
"5.2" : "2.4",
......@@ -493,8 +493,8 @@ int iwl_init_channel_map(struct iwl_priv *priv)
ch_info->scan_power = eeprom_ch_info[ch].max_power_avg;
ch_info->min_power = 0;
IWL_DEBUG_INFO("Ch. %d [%sGHz] %s%s%s%s%s%s(0x%02x"
" %ddBm): Ad-Hoc %ssupported\n",
IWL_DEBUG_INFO("Ch. %d [%sGHz] %s%s%s%s%s%s(0x%02x %ddBm):"
" Ad-Hoc %ssupported\n",
ch_info->channel,
is_channel_a_band(ch_info) ?
"5.2" : "2.4",
......@@ -515,8 +515,8 @@ int iwl_init_channel_map(struct iwl_priv *priv)
/* Set the user_txpower_limit to the highest power
* supported by any channel */
if (eeprom_ch_info[ch].max_power_avg >
priv->user_txpower_limit)
priv->user_txpower_limit =
priv->tx_power_user_lmt)
priv->tx_power_user_lmt =
eeprom_ch_info[ch].max_power_avg;
ch_info++;
......
......@@ -367,9 +367,9 @@ static int iwl4965_commit_rxon(struct iwl_priv *priv)
/* If we issue a new RXON command which required a tune then we must
* send a new TXPOWER command or we won't be able to Tx any frames */
rc = iwl4965_hw_reg_send_txpower(priv);
rc = iwl_set_tx_power(priv, priv->tx_power_user_lmt, true);
if (rc) {
IWL_ERROR("Error setting Tx power (%d).\n", rc);
IWL_ERROR("Error sending TX power (%d).\n", rc);
return rc;
}
......@@ -3637,7 +3637,7 @@ static void iwl4965_bg_scan_completed(struct work_struct *work)
struct iwl_priv *priv =
container_of(work, struct iwl_priv, scan_completed);
IWL_DEBUG(IWL_DL_SCAN, "SCAN complete scan\n");
IWL_DEBUG_SCAN("SCAN complete scan\n");
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return;
......@@ -3650,7 +3650,7 @@ static void iwl4965_bg_scan_completed(struct work_struct *work)
/* Since setting the TXPOWER may have been deferred while
* performing the scan, fire one off */
mutex_lock(&priv->mutex);
iwl4965_hw_reg_send_txpower(priv);
iwl_set_tx_power(priv, priv->tx_power_user_lmt, true);
mutex_unlock(&priv->mutex);
}
......@@ -3930,6 +3930,11 @@ static int iwl4965_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *co
goto out;
}
IWL_DEBUG_MAC80211("TX Power old=%d new=%d\n",
priv->tx_power_user_lmt, conf->power_level);
iwl_set_tx_power(priv, conf->power_level, false);
iwl4965_set_rate(priv);
if (memcmp(&priv->active_rxon,
......@@ -4713,7 +4718,7 @@ static ssize_t show_tx_power(struct device *d,
struct device_attribute *attr, char *buf)
{
struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
return sprintf(buf, "%d\n", priv->user_txpower_limit);
return sprintf(buf, "%d\n", priv->tx_power_user_lmt);
}
static ssize_t store_tx_power(struct device *d,
......@@ -4729,7 +4734,7 @@ static ssize_t store_tx_power(struct device *d,
printk(KERN_INFO DRV_NAME
": %s is not in decimal form.\n", buf);
else
iwl4965_hw_reg_set_txpower(priv, val);
iwl_set_tx_power(priv, val, false);
return count;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册