Merge branch 'x86/asm' into tracing/syscalls

We need the wider TIF work-mask checks in entry_32.S.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

arch/x86/Kconfig

@@ -933,6 +933,12 @@ config X86_CPUID
 	  with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to
 	  /dev/cpu/31/cpuid.
 
+config X86_CPU_DEBUG
+	tristate "/sys/kernel/debug/x86/cpu/* - CPU Debug support"
+	---help---
+	  If you select this option, this will provide various x86 CPUs
+	  information through debugfs.
+
 choice
 	prompt "High Memory Support"
 	default HIGHMEM4G if !X86_NUMAQ
@@ -1433,7 +1439,7 @@ config CRASH_DUMP
 config KEXEC_JUMP
 	bool "kexec jump (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
-	depends on KEXEC && HIBERNATION && X86_32
+	depends on KEXEC && HIBERNATION
 	---help---
 	  Jump between original kernel and kexeced kernel and invoke
 	  code in physical address mode via KEXEC

arch/x86/boot/Makefile

@@ -6,26 +6,23 @@
 # for more details.
 #
 # Copyright (C) 1994 by Linus Torvalds
+# Changed by many, many contributors over the years.
 #
 
 # ROOT_DEV specifies the default root-device when making the image.
 # This can be either FLOPPY, CURRENT, /dev/xxxx or empty, in which case
 # the default of FLOPPY is used by 'build'.
 
-ROOT_DEV := CURRENT
+ROOT_DEV	:= CURRENT
 
 # If you want to preset the SVGA mode, uncomment the next line and
 # set SVGA_MODE to whatever number you want.
 # Set it to -DSVGA_MODE=NORMAL_VGA if you just want the EGA/VGA mode.
 # The number is the same as you would ordinarily press at bootup.
 
-SVGA_MODE := -DSVGA_MODE=NORMAL_VGA
+SVGA_MODE	:= -DSVGA_MODE=NORMAL_VGA
 
-# If you want the RAM disk device, define this to be the size in blocks.
-
-#RAMDISK := -DRAMDISK=512
-
-targets		:= vmlinux.bin setup.bin setup.elf zImage bzImage
+targets		:= vmlinux.bin setup.bin setup.elf bzImage
 subdir-		:= compressed
 
 setup-y		+= a20.o cmdline.o copy.o cpu.o cpucheck.o edd.o
@@ -71,17 +68,13 @@ KBUILD_CFLAGS	:= $(LINUXINCLUDE) -g -Os -D_SETUP -D__KERNEL__ \
 KBUILD_CFLAGS +=   $(call cc-option,-m32)
 KBUILD_AFLAGS	:= $(KBUILD_CFLAGS) -D__ASSEMBLY__
 
-$(obj)/zImage:  asflags-y := $(SVGA_MODE) $(RAMDISK)
-$(obj)/bzImage: ccflags-y := -D__BIG_KERNEL__
-$(obj)/bzImage: asflags-y := $(SVGA_MODE) $(RAMDISK) -D__BIG_KERNEL__
-$(obj)/bzImage: BUILDFLAGS   := -b
+$(obj)/bzImage: asflags-y  := $(SVGA_MODE)
 
 quiet_cmd_image = BUILD   $@
-cmd_image = $(obj)/tools/build $(BUILDFLAGS) $(obj)/setup.bin \
-	    $(obj)/vmlinux.bin $(ROOT_DEV) > $@
+cmd_image = $(obj)/tools/build $(obj)/setup.bin $(obj)/vmlinux.bin \
+	$(ROOT_DEV) > $@
 
-$(obj)/zImage $(obj)/bzImage: $(obj)/setup.bin \
-			      $(obj)/vmlinux.bin $(obj)/tools/build FORCE
+$(obj)/bzImage: $(obj)/setup.bin $(obj)/vmlinux.bin $(obj)/tools/build FORCE
 	$(call if_changed,image)
 	@echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
 

arch/x86/boot/header.S

@@ -24,12 +24,8 @@
 #include "boot.h"
 #include "offsets.h"
 
-SETUPSECTS	= 4			/* default nr of setup-sectors */
 BOOTSEG		= 0x07C0		/* original address of boot-sector */
-SYSSEG		= DEF_SYSSEG		/* system loaded at 0x10000 (65536) */
-SYSSIZE		= DEF_SYSSIZE		/* system size: # of 16-byte clicks */
-					/* to be loaded */
-ROOT_DEV	= 0			/* ROOT_DEV is now written by "build" */
+SYSSEG		= 0x1000		/* historical load address >> 4 */
 
 #ifndef SVGA_MODE
 #define SVGA_MODE ASK_VGA
@@ -97,12 +93,12 @@ bugger_off_msg:
 	.section ".header", "a"
 	.globl	hdr
 hdr:
-setup_sects:	.byte SETUPSECTS
+setup_sects:	.byte 0			/* Filled in by build.c */
 root_flags:	.word ROOT_RDONLY
-syssize:	.long SYSSIZE
-ram_size:	.word RAMDISK
+syssize:	.long 0			/* Filled in by build.c */
+ram_size:	.word 0			/* Obsolete */
 vid_mode:	.word SVGA_MODE
-root_dev:	.word ROOT_DEV
+root_dev:	.word 0			/* Filled in by build.c */
 boot_flag:	.word 0xAA55
 
 	# offset 512, entry point
@@ -123,14 +119,15 @@ _start:
 					# or else old loadlin-1.5 will fail)
 		.globl realmode_swtch
 realmode_swtch:	.word	0, 0		# default_switch, SETUPSEG
-start_sys_seg:	.word	SYSSEG
+start_sys_seg:	.word	SYSSEG		# obsolete and meaningless, but just
+					# in case something decided to "use" it
 		.word	kernel_version-512 # pointing to kernel version string
 					# above section of header is compatible
 					# with loadlin-1.5 (header v1.5). Don't
 					# change it.
 
-type_of_loader:	.byte	0		# = 0, old one (LILO, Loadlin,
-					#      Bootlin, SYSLX, bootsect...)
+type_of_loader:	.byte	0		# 0 means ancient bootloader, newer
+					# bootloaders know to change this.
 					# See Documentation/i386/boot.txt for
 					# assigned ids
 
@@ -142,11 +139,7 @@ CAN_USE_HEAP	= 0x80			# If set, the loader also has set
 					# space behind setup.S can be used for
 					# heap purposes.
 					# Only the loader knows what is free
-#ifndef __BIG_KERNEL__
-		.byte	0
-#else
 		.byte	LOADED_HIGH
-#endif
 
 setup_move_size: .word  0x8000		# size to move, when setup is not
 					# loaded at 0x90000. We will move setup
@@ -157,11 +150,7 @@ setup_move_size: .word  0x8000		# size to move, when setup is not
 
 code32_start:				# here loaders can put a different
 					# start address for 32-bit code.
-#ifndef __BIG_KERNEL__
-		.long	0x1000		#   0x1000 = default for zImage
-#else
 		.long	0x100000	# 0x100000 = default for big kernel
-#endif
 
 ramdisk_image:	.long	0		# address of loaded ramdisk image
 					# Here the loader puts the 32-bit

arch/x86/boot/pm.c

@@ -32,47 +32,6 @@ static void realmode_switch_hook(void)
 	}
 }
 
-/*
- * A zImage kernel is loaded at 0x10000 but wants to run at 0x1000.
- * A bzImage kernel is loaded and runs at 0x100000.
- */
-static void move_kernel_around(void)
-{
-	/* Note: rely on the compile-time option here rather than
-	   the LOADED_HIGH flag.  The Qemu kernel loader unconditionally
-	   sets the loadflags to zero. */
-#ifndef __BIG_KERNEL__
-	u16 dst_seg, src_seg;
-	u32 syssize;
-
-	dst_seg =  0x1000 >> 4;
-	src_seg = 0x10000 >> 4;
-	syssize = boot_params.hdr.syssize; /* Size in 16-byte paragraphs */
-
-	while (syssize) {
-		int paras  = (syssize >= 0x1000) ? 0x1000 : syssize;
-		int dwords = paras << 2;
-
-		asm volatile("pushw %%es ; "
-			     "pushw %%ds ; "
-			     "movw %1,%%es ; "
-			     "movw %2,%%ds ; "
-			     "xorw %%di,%%di ; "
-			     "xorw %%si,%%si ; "
-			     "rep;movsl ; "
-			     "popw %%ds ; "
-			     "popw %%es"
-			     : "+c" (dwords)
-			     : "r" (dst_seg), "r" (src_seg)
-			     : "esi", "edi");
-
-		syssize -= paras;
-		dst_seg += paras;
-		src_seg += paras;
-	}
-#endif
-}
-
 /*
  * Disable all interrupts at the legacy PIC.
  */
@@ -147,9 +106,6 @@ void go_to_protected_mode(void)
 	/* Hook before leaving real mode, also disables interrupts */
 	realmode_switch_hook();
 
-	/* Move the kernel/setup to their final resting places */
-	move_kernel_around();
-
 	/* Enable the A20 gate */
 	if (enable_a20()) {
 		puts("A20 gate not responding, unable to boot...\n");

arch/x86/boot/tools/build.c

@@ -130,7 +130,7 @@ static void die(const char * str, ...)
 
 static void usage(void)
 {
-	die("Usage: build [-b] setup system [rootdev] [> image]");
+	die("Usage: build setup system [rootdev] [> image]");
 }
 
 int main(int argc, char ** argv)
@@ -145,11 +145,6 @@ int main(int argc, char ** argv)
 	void *kernel;
 	u32 crc = 0xffffffffUL;
 
-	if (argc > 2 && !strcmp(argv[1], "-b"))
-	  {
-	    is_big_kernel = 1;
-	    argc--, argv++;
-	  }
 	if ((argc < 3) || (argc > 4))
 		usage();
 	if (argc > 3) {
@@ -216,8 +211,6 @@ int main(int argc, char ** argv)
 		die("Unable to mmap '%s': %m", argv[2]);
 	/* Number of 16-byte paragraphs, including space for a 4-byte CRC */
 	sys_size = (sz + 15 + 4) / 16;
-	if (!is_big_kernel && sys_size > DEF_SYSSIZE)
-		die("System is too big. Try using bzImage or modules.");
 
 	/* Patch the setup code with the appropriate size parameters */
 	buf[0x1f1] = setup_sectors-1;

arch/x86/include/asm/boot.h

 #ifndef _ASM_X86_BOOT_H
 #define _ASM_X86_BOOT_H
 
-/* Don't touch these, unless you really know what you're doing. */
-#define DEF_SYSSEG	0x1000
-#define DEF_SYSSIZE	0x7F00
-
 /* Internal svga startup constants */
 #define NORMAL_VGA	0xffff		/* 80x25 mode */
 #define EXTENDED_VGA	0xfffe		/* 80x50 mode */

arch/x86/include/asm/cpu_debug.h

+#ifndef _ASM_X86_CPU_DEBUG_H
+#define _ASM_X86_CPU_DEBUG_H
+
+/*
+ * CPU x86 architecture debug
+ *
+ * Copyright(C) 2009 Jaswinder Singh Rajput
+ */
+
+/* Register flags */
+enum cpu_debug_bit {
+/* Model Specific Registers (MSRs)					*/
+	CPU_MC_BIT,				/* Machine Check	*/
+	CPU_MONITOR_BIT,			/* Monitor		*/
+	CPU_TIME_BIT,				/* Time			*/
+	CPU_PMC_BIT,				/* Performance Monitor	*/
+	CPU_PLATFORM_BIT,			/* Platform		*/
+	CPU_APIC_BIT,				/* APIC			*/
+	CPU_POWERON_BIT,			/* Power-on		*/
+	CPU_CONTROL_BIT,			/* Control		*/
+	CPU_FEATURES_BIT,			/* Features control	*/
+	CPU_LBRANCH_BIT,			/* Last Branch		*/
+	CPU_BIOS_BIT,				/* BIOS			*/
+	CPU_FREQ_BIT,				/* Frequency		*/
+	CPU_MTTR_BIT,				/* MTRR			*/
+	CPU_PERF_BIT,				/* Performance		*/
+	CPU_CACHE_BIT,				/* Cache		*/
+	CPU_SYSENTER_BIT,			/* Sysenter		*/
+	CPU_THERM_BIT,				/* Thermal		*/
+	CPU_MISC_BIT,				/* Miscellaneous	*/
+	CPU_DEBUG_BIT,				/* Debug		*/
+	CPU_PAT_BIT,				/* PAT			*/
+	CPU_VMX_BIT,				/* VMX			*/
+	CPU_CALL_BIT,				/* System Call		*/
+	CPU_BASE_BIT,				/* BASE Address		*/
+	CPU_SMM_BIT,				/* System mgmt mode	*/
+	CPU_SVM_BIT,				/*Secure Virtual Machine*/
+	CPU_OSVM_BIT,				/* OS-Visible Workaround*/
+/* Standard Registers							*/
+	CPU_TSS_BIT,				/* Task Stack Segment	*/
+	CPU_CR_BIT,				/* Control Registers	*/
+	CPU_DT_BIT,				/* Descriptor Table	*/
+/* End of Registers flags						*/
+	CPU_REG_ALL_BIT,			/* Select all Registers	*/
+};
+
+#define	CPU_REG_ALL		(~0)		/* Select all Registers	*/
+
+#define	CPU_MC			(1 << CPU_MC_BIT)
+#define	CPU_MONITOR		(1 << CPU_MONITOR_BIT)
+#define	CPU_TIME		(1 << CPU_TIME_BIT)
+#define	CPU_PMC			(1 << CPU_PMC_BIT)
+#define	CPU_PLATFORM		(1 << CPU_PLATFORM_BIT)
+#define	CPU_APIC		(1 << CPU_APIC_BIT)
+#define	CPU_POWERON		(1 << CPU_POWERON_BIT)
+#define	CPU_CONTROL		(1 << CPU_CONTROL_BIT)
+#define	CPU_FEATURES		(1 << CPU_FEATURES_BIT)
+#define	CPU_LBRANCH		(1 << CPU_LBRANCH_BIT)
+#define	CPU_BIOS		(1 << CPU_BIOS_BIT)
+#define	CPU_FREQ		(1 << CPU_FREQ_BIT)
+#define	CPU_MTRR		(1 << CPU_MTTR_BIT)
+#define	CPU_PERF		(1 << CPU_PERF_BIT)
+#define	CPU_CACHE		(1 << CPU_CACHE_BIT)
+#define	CPU_SYSENTER		(1 << CPU_SYSENTER_BIT)
+#define	CPU_THERM		(1 << CPU_THERM_BIT)
+#define	CPU_MISC		(1 << CPU_MISC_BIT)
+#define	CPU_DEBUG		(1 << CPU_DEBUG_BIT)
+#define	CPU_PAT			(1 << CPU_PAT_BIT)
+#define	CPU_VMX			(1 << CPU_VMX_BIT)
+#define	CPU_CALL		(1 << CPU_CALL_BIT)
+#define	CPU_BASE		(1 << CPU_BASE_BIT)
+#define	CPU_SMM			(1 << CPU_SMM_BIT)
+#define	CPU_SVM			(1 << CPU_SVM_BIT)
+#define	CPU_OSVM		(1 << CPU_OSVM_BIT)
+#define	CPU_TSS			(1 << CPU_TSS_BIT)
+#define	CPU_CR			(1 << CPU_CR_BIT)
+#define	CPU_DT			(1 << CPU_DT_BIT)
+
+/* Register file flags */
+enum cpu_file_bit {
+	CPU_INDEX_BIT,				/* index		*/
+	CPU_VALUE_BIT,				/* value		*/
+};
+
+#define	CPU_FILE_VALUE			(1 << CPU_VALUE_BIT)
+
+/*
+ * DisplayFamily_DisplayModel	Processor Families/Processor Number Series
+ * --------------------------	------------------------------------------
+ * 05_01, 05_02, 05_04		Pentium, Pentium with MMX
+ *
+ * 06_01			Pentium Pro
+ * 06_03, 06_05			Pentium II Xeon, Pentium II
+ * 06_07, 06_08, 06_0A, 06_0B	Pentium III Xeon, Pentum III
+ *
+ * 06_09, 060D			Pentium M
+ *
+ * 06_0E			Core Duo, Core Solo
+ *
+ * 06_0F			Xeon 3000, 3200, 5100, 5300, 7300 series,
+ *				Core 2 Quad, Core 2 Extreme, Core 2 Duo,
+ *				Pentium dual-core
+ * 06_17			Xeon 5200, 5400 series, Core 2 Quad Q9650
+ *
+ * 06_1C			Atom
+ *
+ * 0F_00, 0F_01, 0F_02		Xeon, Xeon MP, Pentium 4
+ * 0F_03, 0F_04			Xeon, Xeon MP, Pentium 4, Pentium D
+ *
+ * 0F_06			Xeon 7100, 5000 Series, Xeon MP,
+ *				Pentium 4, Pentium D
+ */
+
+/* Register processors bits */
+enum cpu_processor_bit {
+	CPU_NONE,
+/* Intel */
+	CPU_INTEL_PENTIUM_BIT,
+	CPU_INTEL_P6_BIT,
+	CPU_INTEL_PENTIUM_M_BIT,
+	CPU_INTEL_CORE_BIT,
+	CPU_INTEL_CORE2_BIT,
+	CPU_INTEL_ATOM_BIT,
+	CPU_INTEL_XEON_P4_BIT,
+	CPU_INTEL_XEON_MP_BIT,
+};
+
+#define	CPU_ALL			(~0)		/* Select all CPUs	*/
+
+#define	CPU_INTEL_PENTIUM	(1 << CPU_INTEL_PENTIUM_BIT)
+#define	CPU_INTEL_P6		(1 << CPU_INTEL_P6_BIT)
+#define	CPU_INTEL_PENTIUM_M	(1 << CPU_INTEL_PENTIUM_M_BIT)
+#define	CPU_INTEL_CORE		(1 << CPU_INTEL_CORE_BIT)
+#define	CPU_INTEL_CORE2		(1 << CPU_INTEL_CORE2_BIT)
+#define	CPU_INTEL_ATOM		(1 << CPU_INTEL_ATOM_BIT)
+#define	CPU_INTEL_XEON_P4	(1 << CPU_INTEL_XEON_P4_BIT)
+#define	CPU_INTEL_XEON_MP	(1 << CPU_INTEL_XEON_MP_BIT)
+
+#define	CPU_INTEL_PX		(CPU_INTEL_P6 | CPU_INTEL_PENTIUM_M)
+#define	CPU_INTEL_COREX		(CPU_INTEL_CORE | CPU_INTEL_CORE2)
+#define	CPU_INTEL_XEON		(CPU_INTEL_XEON_P4 | CPU_INTEL_XEON_MP)
+#define	CPU_CO_AT		(CPU_INTEL_CORE | CPU_INTEL_ATOM)
+#define	CPU_C2_AT		(CPU_INTEL_CORE2 | CPU_INTEL_ATOM)
+#define	CPU_CX_AT		(CPU_INTEL_COREX | CPU_INTEL_ATOM)
+#define	CPU_CX_XE		(CPU_INTEL_COREX | CPU_INTEL_XEON)
+#define	CPU_P6_XE		(CPU_INTEL_P6 | CPU_INTEL_XEON)
+#define	CPU_PM_CO_AT		(CPU_INTEL_PENTIUM_M | CPU_CO_AT)
+#define	CPU_C2_AT_XE		(CPU_C2_AT | CPU_INTEL_XEON)
+#define	CPU_CX_AT_XE		(CPU_CX_AT | CPU_INTEL_XEON)
+#define	CPU_P6_CX_AT		(CPU_INTEL_P6 | CPU_CX_AT)
+#define	CPU_P6_CX_XE		(CPU_P6_XE | CPU_INTEL_COREX)
+#define	CPU_P6_CX_AT_XE		(CPU_INTEL_P6 | CPU_CX_AT_XE)
+#define	CPU_PM_CX_AT_XE		(CPU_INTEL_PENTIUM_M | CPU_CX_AT_XE)
+#define	CPU_PM_CX_AT		(CPU_INTEL_PENTIUM_M | CPU_CX_AT)
+#define	CPU_PM_CX_XE		(CPU_INTEL_PENTIUM_M | CPU_CX_XE)
+#define	CPU_PX_CX_AT		(CPU_INTEL_PX | CPU_CX_AT)
+#define	CPU_PX_CX_AT_XE		(CPU_INTEL_PX | CPU_CX_AT_XE)
+
+/* Select all Intel CPUs*/
+#define	CPU_INTEL_ALL		(CPU_INTEL_PENTIUM | CPU_PX_CX_AT_XE)
+
+#define MAX_CPU_FILES		512
+
+struct cpu_private {
+	unsigned		cpu;
+	unsigned		type;
+	unsigned		reg;
+	unsigned		file;
+};
+
+struct cpu_debug_base {
+	char			*name;		/* Register name	*/
+	unsigned		flag;		/* Register flag	*/
+};
+
+struct cpu_cpuX_base {
+	struct dentry		*dentry;	/* Register dentry	*/
+	int			init;		/* Register index file	*/
+};
+
+struct cpu_file_base {
+	char			*name;		/* Register file name	*/
+	unsigned		flag;		/* Register file flag	*/
+};
+
+struct cpu_debug_range {
+	unsigned		min;		/* Register range min	*/
+	unsigned		max;		/* Register range max	*/
+	unsigned		flag;		/* Supported flags	*/
+	unsigned		model;		/* Supported models	*/
+};
+
+#endif /* _ASM_X86_CPU_DEBUG_H */

arch/x86/include/asm/desc.h

@@ -91,7 +91,6 @@ static inline int desc_empty(const void *ptr)
 #define store_gdt(dtr) native_store_gdt(dtr)
 #define store_idt(dtr) native_store_idt(dtr)
 #define store_tr(tr) (tr = native_store_tr())
-#define store_ldt(ldt) asm("sldt %0":"=m" (ldt))
 
 #define load_TLS(t, cpu) native_load_tls(t, cpu)
 #define set_ldt native_set_ldt
@@ -112,6 +111,8 @@ static inline void paravirt_free_ldt(struct desc_struct *ldt, unsigned entries)
 }
 #endif	/* CONFIG_PARAVIRT */
 
+#define store_ldt(ldt) asm("sldt %0" : "=m"(ldt))
+
 static inline void native_write_idt_entry(gate_desc *idt, int entry,
 					  const gate_desc *gate)
 {

arch/x86/include/asm/highmem.h

@@ -63,6 +63,7 @@ void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot);
 void *kmap_atomic(struct page *page, enum km_type type);
 void kunmap_atomic(void *kvaddr, enum km_type type);
 void *kmap_atomic_pfn(unsigned long pfn, enum km_type type);
+void *kmap_atomic_prot_pfn(unsigned long pfn, enum km_type type, pgprot_t prot);
 struct page *kmap_atomic_to_page(void *ptr);
 
 #ifndef CONFIG_PARAVIRT

arch/x86/include/asm/kexec.h

@@ -9,13 +9,13 @@
 # define PAGES_NR		4
 #else
 # define PA_CONTROL_PAGE	0
-# define PA_TABLE_PAGE		1
-# define PAGES_NR		2
+# define VA_CONTROL_PAGE	1
+# define PA_TABLE_PAGE		2
+# define PA_SWAP_PAGE		3
+# define PAGES_NR		4
 #endif
 
-#ifdef CONFIG_X86_32
 # define KEXEC_CONTROL_CODE_MAX_SIZE	2048
-#endif
 
 #ifndef __ASSEMBLY__
 
@@ -136,10 +136,11 @@ relocate_kernel(unsigned long indirection_page,
 		unsigned int has_pae,
 		unsigned int preserve_context);
 #else
-NORET_TYPE void
+unsigned long
 relocate_kernel(unsigned long indirection_page,
 		unsigned long page_list,
-		unsigned long start_address) ATTRIB_NORET;
+		unsigned long start_address,
+		unsigned int preserve_context);
 #endif
 
 #define ARCH_HAS_KIMAGE_ARCH

arch/x86/include/asm/linkage.h

 #ifndef _ASM_X86_LINKAGE_H
 #define _ASM_X86_LINKAGE_H
 
+#include <linux/stringify.h>
+
 #undef notrace
 #define notrace __attribute__((no_instrument_function))
 
@@ -53,14 +55,9 @@
 	.globl name;	\
 	name:
 
-#ifdef CONFIG_X86_64
-#define __ALIGN .p2align 4,,15
-#define __ALIGN_STR ".p2align 4,,15"
-#endif
-
-#ifdef CONFIG_X86_ALIGNMENT_16
-#define __ALIGN .align 16,0x90
-#define __ALIGN_STR ".align 16,0x90"
+#if defined(CONFIG_X86_64) || defined(CONFIG_X86_ALIGNMENT_16)
+#define __ALIGN		.p2align 4, 0x90
+#define __ALIGN_STR	__stringify(__ALIGN)
 #endif
 
 #endif /* __ASSEMBLY__ */

arch/x86/kernel/cpu/Makefile

@@ -14,6 +14,8 @@ obj-y			+= vmware.o hypervisor.o
 obj-$(CONFIG_X86_32)	+= bugs.o cmpxchg.o
 obj-$(CONFIG_X86_64)	+= bugs_64.o
 
+obj-$(CONFIG_X86_CPU_DEBUG)		+= cpu_debug.o
+
 obj-$(CONFIG_CPU_SUP_INTEL)		+= intel.o
 obj-$(CONFIG_CPU_SUP_AMD)		+= amd.o
 obj-$(CONFIG_CPU_SUP_CYRIX_32)		+= cyrix.o

arch/x86/kernel/cpu/common.c

@@ -1078,8 +1078,7 @@ void __cpuinit cpu_init(void)
 
 	atomic_inc(&init_mm.mm_count);
 	me->active_mm = &init_mm;
-	if (me->mm)
-		BUG();
+	BUG_ON(me->mm);
 	enter_lazy_tlb(&init_mm, me);
 
 	load_sp0(t, &current->thread);
@@ -1145,8 +1144,7 @@ void __cpuinit cpu_init(void)
 	 */
 	atomic_inc(&init_mm.mm_count);
 	curr->active_mm = &init_mm;
-	if (curr->mm)
-		BUG();
+	BUG_ON(curr->mm);
 	enter_lazy_tlb(&init_mm, curr);
 
 	load_sp0(t, thread);

arch/x86/kernel/cpu/mcheck/mce_64.c

@@ -639,7 +639,7 @@ static void mce_init_timer(void)
 	if (!next_interval)
 		return;
 	setup_timer(t, mcheck_timer, smp_processor_id());
-	t->expires = round_jiffies_relative(jiffies + next_interval);
+	t->expires = round_jiffies(jiffies + next_interval);
 	add_timer(t);
 }
 
@@ -1110,7 +1110,7 @@ static int __cpuinit mce_cpu_callback(struct notifier_block *nfb,
 		break;
 	case CPU_DOWN_FAILED:
 	case CPU_DOWN_FAILED_FROZEN:
-		t->expires = round_jiffies_relative(jiffies + next_interval);
+		t->expires = round_jiffies(jiffies + next_interval);
 		add_timer_on(t, cpu);
 		smp_call_function_single(cpu, mce_reenable_cpu, &action, 1);
 		break;

arch/x86/kernel/entry_32.S

@@ -442,8 +442,7 @@ sysenter_past_esp:
 
 	GET_THREAD_INFO(%ebp)
 
-	/* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */
-	testw $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%ebp)
+	testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%ebp)
 	jnz sysenter_audit
 sysenter_do_call:
 	cmpl $(nr_syscalls), %eax
@@ -454,7 +453,7 @@ sysenter_do_call:
 	DISABLE_INTERRUPTS(CLBR_ANY)
 	TRACE_IRQS_OFF
 	movl TI_flags(%ebp), %ecx
-	testw $_TIF_ALLWORK_MASK, %cx
+	testl $_TIF_ALLWORK_MASK, %ecx
 	jne sysexit_audit
 sysenter_exit:
 /* if something modifies registers it must also disable sysexit */
@@ -468,7 +467,7 @@ sysenter_exit:
 
 #ifdef CONFIG_AUDITSYSCALL
 sysenter_audit:
-	testw $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
+	testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
 	jnz syscall_trace_entry
 	addl $4,%esp
 	CFI_ADJUST_CFA_OFFSET -4
@@ -485,7 +484,7 @@ sysenter_audit:
 	jmp sysenter_do_call
 
 sysexit_audit:
-	testw $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %cx
+	testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %ecx
 	jne syscall_exit_work
 	TRACE_IRQS_ON
 	ENABLE_INTERRUPTS(CLBR_ANY)
@@ -498,7 +497,7 @@ sysexit_audit:
 	DISABLE_INTERRUPTS(CLBR_ANY)
 	TRACE_IRQS_OFF
 	movl TI_flags(%ebp), %ecx
-	testw $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %cx
+	testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %ecx
 	jne syscall_exit_work
 	movl PT_EAX(%esp),%eax	/* reload syscall return value */
 	jmp sysenter_exit
@@ -523,8 +522,7 @@ ENTRY(system_call)
 	SAVE_ALL
 	GET_THREAD_INFO(%ebp)
 					# system call tracing in operation / emulation
-	/* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */
-	testw $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%ebp)
+	testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%ebp)
 	jnz syscall_trace_entry
 	cmpl $(nr_syscalls), %eax
 	jae syscall_badsys
@@ -538,7 +536,7 @@ syscall_exit:
 					# between sampling and the iret
 	TRACE_IRQS_OFF
 	movl TI_flags(%ebp), %ecx
-	testw $_TIF_ALLWORK_MASK, %cx	# current->work
+	testl $_TIF_ALLWORK_MASK, %ecx	# current->work
 	jne syscall_exit_work
 
 restore_all:
@@ -673,7 +671,7 @@ END(syscall_trace_entry)
 	# perform syscall exit tracing
 	ALIGN
 syscall_exit_work:
-	testb $_TIF_WORK_SYSCALL_EXIT, %cl
+	testl $_TIF_WORK_SYSCALL_EXIT, %ecx
 	jz work_pending
 	TRACE_IRQS_ON
 	ENABLE_INTERRUPTS(CLBR_ANY)	# could let syscall_trace_leave() call

arch/x86/kernel/entry_64.S

@@ -368,6 +368,7 @@ ENTRY(save_rest)
 END(save_rest)
 
 /* save complete stack frame */
+	.pushsection .kprobes.text, "ax"
 ENTRY(save_paranoid)
 	XCPT_FRAME 1 RDI+8
 	cld
@@ -396,6 +397,7 @@ ENTRY(save_paranoid)
 1:	ret
 	CFI_ENDPROC
 END(save_paranoid)
+	.popsection
 
 /*
  * A newly forked process directly context switches into this address.
@@ -416,7 +418,6 @@ ENTRY(ret_from_fork)
 
 	GET_THREAD_INFO(%rcx)
 
-	CFI_REMEMBER_STATE
 	RESTORE_REST
 
 	testl $3, CS-ARGOFFSET(%rsp)		# from kernel_thread?
@@ -428,7 +429,6 @@ ENTRY(ret_from_fork)
 	RESTORE_TOP_OF_STACK %rdi, -ARGOFFSET
 	jmp ret_from_sys_call			# go to the SYSRET fastpath
 
-	CFI_RESTORE_STATE
 	CFI_ENDPROC
 END(ret_from_fork)
 

arch/x86/kernel/machine_kexec_32.c

@@ -14,12 +14,12 @@
 #include <linux/ftrace.h>
 #include <linux/suspend.h>
 #include <linux/gfp.h>
+#include <linux/io.h>
 
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
 #include <asm/tlbflush.h>
 #include <asm/mmu_context.h>
-#include <asm/io.h>
 #include <asm/apic.h>
 #include <asm/cpufeature.h>
 #include <asm/desc.h>
@@ -63,7 +63,7 @@ static void load_segments(void)
 		"\tmovl %%eax,%%fs\n"
 		"\tmovl %%eax,%%gs\n"
 		"\tmovl %%eax,%%ss\n"
-		::: "eax", "memory");
+		: : : "eax", "memory");
 #undef STR
 #undef __STR
 }
@@ -205,7 +205,8 @@ void machine_kexec(struct kimage *image)
 
 	if (image->preserve_context) {
 #ifdef CONFIG_X86_IO_APIC
-		/* We need to put APICs in legacy mode so that we can
+		/*
+		 * We need to put APICs in legacy mode so that we can
 		 * get timer interrupts in second kernel. kexec/kdump
 		 * paths already have calls to disable_IO_APIC() in
 		 * one form or other. kexec jump path also need
@@ -227,7 +228,8 @@ void machine_kexec(struct kimage *image)
 		page_list[PA_SWAP_PAGE] = (page_to_pfn(image->swap_page)
 						<< PAGE_SHIFT);
 
-	/* The segment registers are funny things, they have both a
+	/*
+	 * The segment registers are funny things, they have both a
 	 * visible and an invisible part.  Whenever the visible part is
 	 * set to a specific selector, the invisible part is loaded
 	 * with from a table in memory.  At no other time is the
@@ -237,11 +239,12 @@ void machine_kexec(struct kimage *image)
 	 * segments, before I zap the gdt with an invalid value.
 	 */
 	load_segments();
-	/* The gdt & idt are now invalid.
+	/*
+	 * The gdt & idt are now invalid.
 	 * If you want to load them you must set up your own idt & gdt.
 	 */
-	set_gdt(phys_to_virt(0),0);
-	set_idt(phys_to_virt(0),0);
+	set_gdt(phys_to_virt(0), 0);
+	set_idt(phys_to_virt(0), 0);
 
 	/* now call it */
 	image->start = relocate_kernel_ptr((unsigned long)image->head,

arch/x86/kernel/machine_kexec_64.c

@@ -12,11 +12,47 @@
 #include <linux/reboot.h>
 #include <linux/numa.h>
 #include <linux/ftrace.h>
+#include <linux/io.h>
+#include <linux/suspend.h>
 
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
 #include <asm/mmu_context.h>
-#include <asm/io.h>
+
+static int init_one_level2_page(struct kimage *image, pgd_t *pgd,
+				unsigned long addr)
+{
+	pud_t *pud;
+	pmd_t *pmd;
+	struct page *page;
+	int result = -ENOMEM;
+
+	addr &= PMD_MASK;
+	pgd += pgd_index(addr);
+	if (!pgd_present(*pgd)) {
+		page = kimage_alloc_control_pages(image, 0);
+		if (!page)
+			goto out;
+		pud = (pud_t *)page_address(page);
+		memset(pud, 0, PAGE_SIZE);
+		set_pgd(pgd, __pgd(__pa(pud) | _KERNPG_TABLE));
+	}
+	pud = pud_offset(pgd, addr);
+	if (!pud_present(*pud)) {
+		page = kimage_alloc_control_pages(image, 0);
+		if (!page)
+			goto out;
+		pmd = (pmd_t *)page_address(page);
+		memset(pmd, 0, PAGE_SIZE);
+		set_pud(pud, __pud(__pa(pmd) | _KERNPG_TABLE));
+	}
+	pmd = pmd_offset(pud, addr);
+	if (!pmd_present(*pmd))
+		set_pmd(pmd, __pmd(addr | __PAGE_KERNEL_LARGE_EXEC));
+	result = 0;
+out:
+	return result;
+}
 
 static void init_level2_page(pmd_t *level2p, unsigned long addr)
 {
@@ -83,9 +119,8 @@ static int init_level4_page(struct kimage *image, pgd_t *level4p,
 		}
 		level3p = (pud_t *)page_address(page);
 		result = init_level3_page(image, level3p, addr, last_addr);
-		if (result) {
+		if (result)
 			goto out;
-		}
 		set_pgd(level4p++, __pgd(__pa(level3p) | _KERNPG_TABLE));
 		addr += PGDIR_SIZE;
 	}
@@ -154,6 +189,13 @@ static int init_pgtable(struct kimage *image, unsigned long start_pgtable)
 	int result;
 	level4p = (pgd_t *)__va(start_pgtable);
 	result = init_level4_page(image, level4p, 0, max_pfn << PAGE_SHIFT);
+	if (result)
+		return result;
+	/*
+	 * image->start may be outside 0 ~ max_pfn, for example when
+	 * jump back to original kernel from kexeced kernel
+	 */
+	result = init_one_level2_page(image, level4p, image->start);
 	if (result)
 		return result;
 	return init_transition_pgtable(image, level4p);
@@ -229,20 +271,45 @@ void machine_kexec(struct kimage *image)
 {
 	unsigned long page_list[PAGES_NR];
 	void *control_page;
+	int save_ftrace_enabled;
 
-	tracer_disable();
+#ifdef CONFIG_KEXEC_JUMP
+	if (kexec_image->preserve_context)
+		save_processor_state();
+#endif
+
+	save_ftrace_enabled = __ftrace_enabled_save();
 
 	/* Interrupts aren't acceptable while we reboot */
 	local_irq_disable();
 
+	if (image->preserve_context) {
+#ifdef CONFIG_X86_IO_APIC
+		/*
+		 * We need to put APICs in legacy mode so that we can
+		 * get timer interrupts in second kernel. kexec/kdump
+		 * paths already have calls to disable_IO_APIC() in
+		 * one form or other. kexec jump path also need
+		 * one.
+		 */
+		disable_IO_APIC();
+#endif
+	}
+
 	control_page = page_address(image->control_code_page) + PAGE_SIZE;
-	memcpy(control_page, relocate_kernel, PAGE_SIZE);
+	memcpy(control_page, relocate_kernel, KEXEC_CONTROL_CODE_MAX_SIZE);
 
 	page_list[PA_CONTROL_PAGE] = virt_to_phys(control_page);
+	page_list[VA_CONTROL_PAGE] = (unsigned long)control_page;
 	page_list[PA_TABLE_PAGE] =
 	  (unsigned long)__pa(page_address(image->control_code_page));
 
-	/* The segment registers are funny things, they have both a
+	if (image->type == KEXEC_TYPE_DEFAULT)
+		page_list[PA_SWAP_PAGE] = (page_to_pfn(image->swap_page)
+						<< PAGE_SHIFT);
+
+	/*
+	 * The segment registers are funny things, they have both a
 	 * visible and an invisible part.  Whenever the visible part is
 	 * set to a specific selector, the invisible part is loaded
 	 * with from a table in memory.  At no other time is the
@@ -252,15 +319,25 @@ void machine_kexec(struct kimage *image)
 	 * segments, before I zap the gdt with an invalid value.
 	 */
 	load_segments();
-	/* The gdt & idt are now invalid.
+	/*
+	 * The gdt & idt are now invalid.
 	 * If you want to load them you must set up your own idt & gdt.
 	 */
-	set_gdt(phys_to_virt(0),0);
-	set_idt(phys_to_virt(0),0);
+	set_gdt(phys_to_virt(0), 0);
+	set_idt(phys_to_virt(0), 0);
 
 	/* now call it */
-	relocate_kernel((unsigned long)image->head, (unsigned long)page_list,
-			image->start);
+	image->start = relocate_kernel((unsigned long)image->head,
+				       (unsigned long)page_list,
+				       image->start,
+				       image->preserve_context);
+
+#ifdef CONFIG_KEXEC_JUMP
+	if (kexec_image->preserve_context)
+		restore_processor_state();
+#endif
+
+	__ftrace_enabled_restore(save_ftrace_enabled);
 }
 
 void arch_crash_save_vmcoreinfo(void)

arch/x86/kernel/quirks.c

@@ -74,8 +74,7 @@ static void ich_force_hpet_resume(void)
 	if (!force_hpet_address)
 		return;
 
-	if (rcba_base == NULL)
-		BUG();
+	BUG_ON(rcba_base == NULL);
 
 	/* read the Function Disable register, dword mode only */
 	val = readl(rcba_base + 0x3404);

arch/x86/kernel/relocate_kernel_32.S

@@ -17,7 +17,8 @@
 
 #define PTR(x) (x << 2)
 
-/* control_page + KEXEC_CONTROL_CODE_MAX_SIZE
+/*
+ * control_page + KEXEC_CONTROL_CODE_MAX_SIZE
  * ~ control_page + PAGE_SIZE are used as data storage and stack for
  * jumping back
  */
@@ -76,8 +77,10 @@ relocate_kernel:
 	movl	%eax, CP_PA_SWAP_PAGE(%edi)
 	movl	%ebx, CP_PA_BACKUP_PAGES_MAP(%edi)
 
-	/* get physical address of control page now */
-	/* this is impossible after page table switch */
+	/*
+	 * get physical address of control page now
+	 * this is impossible after page table switch
+	 */
 	movl	PTR(PA_CONTROL_PAGE)(%ebp), %edi
 
 	/* switch to new set of page tables */
@@ -97,7 +100,8 @@ identity_mapped:
 	/* store the start address on the stack */
 	pushl   %edx
 
-	/* Set cr0 to a known state:
+	/*
+	 * Set cr0 to a known state:
 	 *  - Paging disabled
 	 *  - Alignment check disabled
 	 *  - Write protect disabled
@@ -113,7 +117,8 @@ identity_mapped:
 	/* clear cr4 if applicable */
 	testl	%ecx, %ecx
 	jz	1f
-	/* Set cr4 to a known state:
+	/*
+	 * Set cr4 to a known state:
 	 * Setting everything to zero seems safe.
 	 */
 	xorl	%eax, %eax
@@ -132,15 +137,18 @@ identity_mapped:
 	call	swap_pages
 	addl	$8, %esp
 
-	/* To be certain of avoiding problems with self-modifying code
+	/*
+	 * To be certain of avoiding problems with self-modifying code
 	 * I need to execute a serializing instruction here.
 	 * So I flush the TLB, it's handy, and not processor dependent.
 	 */
 	xorl	%eax, %eax
 	movl	%eax, %cr3
 
-	/* set all of the registers to known values */
-	/* leave %esp alone */
+	/*
+	 * set all of the registers to known values
+	 * leave %esp alone
+	 */
 
 	testl	%esi, %esi
 	jnz 1f

arch/x86/kernel/relocate_kernel_64.S

@@ -19,29 +19,77 @@
 #define PTR(x) (x << 3)
 #define PAGE_ATTR (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY)
 
+/*
+ * control_page + KEXEC_CONTROL_CODE_MAX_SIZE
+ * ~ control_page + PAGE_SIZE are used as data storage and stack for
+ * jumping back
+ */
+#define DATA(offset)		(KEXEC_CONTROL_CODE_MAX_SIZE+(offset))
+
+/* Minimal CPU state */
+#define RSP			DATA(0x0)
+#define CR0			DATA(0x8)
+#define CR3			DATA(0x10)
+#define CR4			DATA(0x18)
+
+/* other data */
+#define CP_PA_TABLE_PAGE	DATA(0x20)
+#define CP_PA_SWAP_PAGE		DATA(0x28)
+#define CP_PA_BACKUP_PAGES_MAP	DATA(0x30)
+
 	.text
 	.align PAGE_SIZE
 	.code64
 	.globl relocate_kernel
 relocate_kernel:
-	/* %rdi indirection_page
+	/*
+	 * %rdi indirection_page
 	 * %rsi page_list
 	 * %rdx start address
+	 * %rcx preserve_context
 	 */
 
+	/* Save the CPU context, used for jumping back */
+	pushq %rbx
+	pushq %rbp
+	pushq %r12
+	pushq %r13
+	pushq %r14
+	pushq %r15
+	pushf
+
+	movq	PTR(VA_CONTROL_PAGE)(%rsi), %r11
+	movq	%rsp, RSP(%r11)
+	movq	%cr0, %rax
+	movq	%rax, CR0(%r11)
+	movq	%cr3, %rax
+	movq	%rax, CR3(%r11)
+	movq	%cr4, %rax
+	movq	%rax, CR4(%r11)
+
 	/* zero out flags, and disable interrupts */
 	pushq $0
 	popfq
 
-	/* get physical address of control page now */
-	/* this is impossible after page table switch */
+	/*
+	 * get physical address of control page now
+	 * this is impossible after page table switch
+	 */
 	movq	PTR(PA_CONTROL_PAGE)(%rsi), %r8
 
 	/* get physical address of page table now too */
-	movq	PTR(PA_TABLE_PAGE)(%rsi), %rcx
+	movq	PTR(PA_TABLE_PAGE)(%rsi), %r9
+
+	/* get physical address of swap page now */
+	movq	PTR(PA_SWAP_PAGE)(%rsi), %r10
+
+	/* save some information for jumping back */
+	movq	%r9, CP_PA_TABLE_PAGE(%r11)
+	movq	%r10, CP_PA_SWAP_PAGE(%r11)
+	movq	%rdi, CP_PA_BACKUP_PAGES_MAP(%r11)
 
 	/* Switch to the identity mapped page tables */
-	movq	%rcx, %cr3
+	movq	%r9, %cr3
 
 	/* setup a new stack at the end of the physical control page */
 	lea	PAGE_SIZE(%r8), %rsp
@@ -55,7 +103,8 @@ identity_mapped:
 	/* store the start address on the stack */
 	pushq   %rdx
 
-	/* Set cr0 to a known state:
+	/*
+	 * Set cr0 to a known state:
 	 *  - Paging enabled
 	 *  - Alignment check disabled
 	 *  - Write protect disabled
@@ -68,7 +117,8 @@ identity_mapped:
 	orl	$(X86_CR0_PG | X86_CR0_PE), %eax
 	movq	%rax, %cr0
 
-	/* Set cr4 to a known state:
+	/*
+	 * Set cr4 to a known state:
 	 *  - physical address extension enabled
 	 */
 	movq	$X86_CR4_PAE, %rax
@@ -78,9 +128,87 @@ identity_mapped:
 1:
 
 	/* Flush the TLB (needed?) */
-	movq	%rcx, %cr3
+	movq	%r9, %cr3
+
+	movq	%rcx, %r11
+	call	swap_pages
+
+	/*
+	 * To be certain of avoiding problems with self-modifying code
+	 * I need to execute a serializing instruction here.
+	 * So I flush the TLB by reloading %cr3 here, it's handy,
+	 * and not processor dependent.
+	 */
+	movq	%cr3, %rax
+	movq	%rax, %cr3
+
+	/*
+	 * set all of the registers to known values
+	 * leave %rsp alone
+	 */
+
+	testq	%r11, %r11
+	jnz 1f
+	xorq	%rax, %rax
+	xorq	%rbx, %rbx
+	xorq    %rcx, %rcx
+	xorq    %rdx, %rdx
+	xorq    %rsi, %rsi
+	xorq    %rdi, %rdi
+	xorq    %rbp, %rbp
+	xorq	%r8,  %r8
+	xorq	%r9,  %r9
+	xorq	%r10, %r9
+	xorq	%r11, %r11
+	xorq	%r12, %r12
+	xorq	%r13, %r13
+	xorq	%r14, %r14
+	xorq	%r15, %r15
+
+	ret
+
+1:
+	popq	%rdx
+	leaq	PAGE_SIZE(%r10), %rsp
+	call	*%rdx
+
+	/* get the re-entry point of the peer system */
+	movq	0(%rsp), %rbp
+	call	1f
+1:
+	popq	%r8
+	subq	$(1b - relocate_kernel), %r8
+	movq	CP_PA_SWAP_PAGE(%r8), %r10
+	movq	CP_PA_BACKUP_PAGES_MAP(%r8), %rdi
+	movq	CP_PA_TABLE_PAGE(%r8), %rax
+	movq	%rax, %cr3
+	lea	PAGE_SIZE(%r8), %rsp
+	call	swap_pages
+	movq	$virtual_mapped, %rax
+	pushq	%rax
+	ret
+
+virtual_mapped:
+	movq	RSP(%r8), %rsp
+	movq	CR4(%r8), %rax
+	movq	%rax, %cr4
+	movq	CR3(%r8), %rax
+	movq	CR0(%r8), %r8
+	movq	%rax, %cr3
+	movq	%r8, %cr0
+	movq	%rbp, %rax
+
+	popf
+	popq	%r15
+	popq	%r14
+	popq	%r13
+	popq	%r12
+	popq	%rbp
+	popq	%rbx
+	ret
 
 	/* Do the copies */
+swap_pages:
 	movq	%rdi, %rcx 	/* Put the page_list in %rcx */
 	xorq	%rdi, %rdi
 	xorq	%rsi, %rsi
@@ -112,36 +240,27 @@ identity_mapped:
 	movq	%rcx,   %rsi  /* For ever source page do a copy */
 	andq	$0xfffffffffffff000, %rsi
 
+	movq	%rdi, %rdx
+	movq	%rsi, %rax
+
+	movq	%r10, %rdi
 	movq	$512,   %rcx
 	rep ; movsq
-	jmp	0b
-3:
-
-	/* To be certain of avoiding problems with self-modifying code
-	 * I need to execute a serializing instruction here.
-	 * So I flush the TLB by reloading %cr3 here, it's handy,
-	 * and not processor dependent.
-	 */
-	movq	%cr3, %rax
-	movq	%rax, %cr3
 
-	/* set all of the registers to known values */
-	/* leave %rsp alone */
+	movq	%rax, %rdi
+	movq	%rdx, %rsi
+	movq	$512,   %rcx
+	rep ; movsq
 
-	xorq	%rax, %rax
-	xorq	%rbx, %rbx
-	xorq    %rcx, %rcx
-	xorq    %rdx, %rdx
-	xorq    %rsi, %rsi
-	xorq    %rdi, %rdi
-	xorq    %rbp, %rbp
-	xorq	%r8,  %r8
-	xorq	%r9,  %r9
-	xorq	%r10, %r9
-	xorq	%r11, %r11
-	xorq	%r12, %r12
-	xorq	%r13, %r13
-	xorq	%r14, %r14
-	xorq	%r15, %r15
+	movq	%rdx, %rdi
+	movq	%r10, %rsi
+	movq	$512,   %rcx
+	rep ; movsq
 
+	lea	PAGE_SIZE(%rax), %rsi
+	jmp	0b
+3:
 	ret
+
+	.globl kexec_control_code_size
+.set kexec_control_code_size, . - relocate_kernel

arch/x86/kernel/visws_quirks.c

@@ -578,7 +578,7 @@ static struct irq_chip piix4_virtual_irq_type = {
 static irqreturn_t piix4_master_intr(int irq, void *dev_id)
 {
 	int realirq;
-	irq_desc_t *desc;
+	struct irq_desc *desc;
 	unsigned long flags;
 
 	spin_lock_irqsave(&i8259A_lock, flags);

arch/x86/kernel/vmlinux_64.lds.S

@@ -275,3 +275,10 @@ ASSERT((_end - _text <= KERNEL_IMAGE_SIZE),
 ASSERT((per_cpu__irq_stack_union == 0),
         "irq_stack_union is not at start of per-cpu area");
 #endif
+
+#ifdef CONFIG_KEXEC
+#include <asm/kexec.h>
+
+ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE,
+       "kexec control code size is too big")
+#endif

arch/x86/lib/memcpy_64.S

 /* Copyright 2002 Andi Kleen */
 
 #include <linux/linkage.h>
-#include <asm/dwarf2.h>
+
 #include <asm/cpufeature.h>
+#include <asm/dwarf2.h>
 
 /*
  * memcpy - Copy a memory block.
  *
- * Input:	
- * rdi destination
- * rsi source
- * rdx count
- * 
+ * Input:
+ *  rdi destination
+ *  rsi source
+ *  rdx count
+ *
  * Output:
  * rax original destination
- */	
+ */
 
+/*
+ * memcpy_c() - fast string ops (REP MOVSQ) based variant.
+ *
+ * Calls to this get patched into the kernel image via the
+ * alternative instructions framework:
+ */
 	ALIGN
 memcpy_c:
 	CFI_STARTPROC
-	movq %rdi,%rax
-	movl %edx,%ecx
-	shrl $3,%ecx
-	andl $7,%edx
+	movq %rdi, %rax
+
+	movl %edx, %ecx
+	shrl $3, %ecx
+	andl $7, %edx
 	rep movsq
-	movl %edx,%ecx
+	movl %edx, %ecx
 	rep movsb
 	ret
 	CFI_ENDPROC
@@ -33,99 +41,110 @@ ENDPROC(memcpy_c)
 ENTRY(__memcpy)
 ENTRY(memcpy)
 	CFI_STARTPROC
-	pushq %rbx
-	CFI_ADJUST_CFA_OFFSET 8
-	CFI_REL_OFFSET rbx, 0
-	movq %rdi,%rax
 
-	movl %edx,%ecx
-	shrl $6,%ecx
+	/*
+	 * Put the number of full 64-byte blocks into %ecx.
+	 * Tail portion is handled at the end:
+	 */
+	movq %rdi, %rax
+	movl %edx, %ecx
+	shrl   $6, %ecx
 	jz .Lhandle_tail
 
 	.p2align 4
 .Lloop_64:
+	/*
+	 * We decrement the loop index here - and the zero-flag is
+	 * checked at the end of the loop (instructions inbetween do
+	 * not change the zero flag):
+	 */
 	decl %ecx
 
-	movq (%rsi),%r11
-	movq 8(%rsi),%r8
+	/*
+	 * Move in blocks of 4x16 bytes:
+	 */
+	movq 0*8(%rsi),		%r11
+	movq 1*8(%rsi),		%r8
+	movq %r11,		0*8(%rdi)
+	movq %r8,		1*8(%rdi)
 
-	movq %r11,(%rdi)
-	movq %r8,1*8(%rdi)
+	movq 2*8(%rsi),		%r9
+	movq 3*8(%rsi),		%r10
+	movq %r9,		2*8(%rdi)
+	movq %r10,		3*8(%rdi)
 
-	movq 2*8(%rsi),%r9
-	movq 3*8(%rsi),%r10
+	movq 4*8(%rsi),		%r11
+	movq 5*8(%rsi),		%r8
+	movq %r11,		4*8(%rdi)
+	movq %r8,		5*8(%rdi)
 
-	movq %r9,2*8(%rdi)
-	movq %r10,3*8(%rdi)
+	movq 6*8(%rsi),		%r9
+	movq 7*8(%rsi),		%r10
+	movq %r9,		6*8(%rdi)
+	movq %r10,		7*8(%rdi)
 
-	movq 4*8(%rsi),%r11
-	movq 5*8(%rsi),%r8
+	leaq 64(%rsi), %rsi
+	leaq 64(%rdi), %rdi
 
-	movq %r11,4*8(%rdi)
-	movq %r8,5*8(%rdi)
-
-	movq 6*8(%rsi),%r9
-	movq 7*8(%rsi),%r10
-
-	movq %r9,6*8(%rdi)
-	movq %r10,7*8(%rdi)
-
-	leaq 64(%rsi),%rsi
-	leaq 64(%rdi),%rdi
 	jnz  .Lloop_64
 
 .Lhandle_tail:
-	movl %edx,%ecx
-	andl $63,%ecx
-	shrl $3,%ecx
+	movl %edx, %ecx
+	andl  $63, %ecx
+	shrl   $3, %ecx
 	jz   .Lhandle_7
+
 	.p2align 4
 .Lloop_8:
 	decl %ecx
-	movq (%rsi),%r8
-	movq %r8,(%rdi)
-	leaq 8(%rdi),%rdi
-	leaq 8(%rsi),%rsi
+	movq (%rsi),		%r8
+	movq %r8,		(%rdi)
+	leaq 8(%rdi),		%rdi
+	leaq 8(%rsi),		%rsi
 	jnz  .Lloop_8
 
 .Lhandle_7:
-	movl %edx,%ecx
-	andl $7,%ecx
-	jz .Lende
+	movl %edx, %ecx
+	andl $7, %ecx
+	jz .Lend
+
 	.p2align 4
 .Lloop_1:
-	movb (%rsi),%r8b
-	movb %r8b,(%rdi)
+	movb (%rsi), %r8b
+	movb %r8b, (%rdi)
 	incq %rdi
 	incq %rsi
 	decl %ecx
 	jnz .Lloop_1
 
-.Lende:
-	popq %rbx
-	CFI_ADJUST_CFA_OFFSET -8
-	CFI_RESTORE rbx
+.Lend:
 	ret
-.Lfinal:
 	CFI_ENDPROC
 ENDPROC(memcpy)
 ENDPROC(__memcpy)
 
-	/* Some CPUs run faster using the string copy instructions.
-	   It is also a lot simpler. Use this when possible */
+	/*
+	 * Some CPUs run faster using the string copy instructions.
+	 * It is also a lot simpler. Use this when possible:
+	 */
 
-	.section .altinstr_replacement,"ax"
+	.section .altinstr_replacement, "ax"
 1:	.byte 0xeb				/* jmp <disp8> */
 	.byte (memcpy_c - memcpy) - (2f - 1b)	/* offset */
 2:
 	.previous
-	.section .altinstructions,"a"
+
+	.section .altinstructions, "a"
 	.align 8
 	.quad memcpy
 	.quad 1b
 	.byte X86_FEATURE_REP_GOOD
-	/* Replace only beginning, memcpy is used to apply alternatives, so it
-	 * is silly to overwrite itself with nops - reboot is only outcome... */
+
+	/*
+	 * Replace only beginning, memcpy is used to apply alternatives,
+	 * so it is silly to overwrite itself with nops - reboot is the
+	 * only outcome...
+	 */
 	.byte 2b - 1b
 	.byte 2b - 1b
 	.previous

arch/x86/mm/highmem_32.c

@@ -121,23 +121,30 @@ void kunmap_atomic(void *kvaddr, enum km_type type)
 	pagefault_enable();
 }
 
-/* This is the same as kmap_atomic() but can map memory that doesn't
- * have a struct page associated with it.
- */
-void *kmap_atomic_pfn(unsigned long pfn, enum km_type type)
+void *kmap_atomic_prot_pfn(unsigned long pfn, enum km_type type, pgprot_t prot)
 {
 	enum fixed_addresses idx;
 	unsigned long vaddr;
 
 	pagefault_disable();
 
-	idx = type + KM_TYPE_NR*smp_processor_id();
+	debug_kmap_atomic_prot(type);
+
+	idx = type + KM_TYPE_NR * smp_processor_id();
 	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
-	set_pte(kmap_pte-idx, pfn_pte(pfn, kmap_prot));
+	set_pte(kmap_pte - idx, pfn_pte(pfn, prot));
 	arch_flush_lazy_mmu_mode();
 
 	return (void*) vaddr;
 }
+
+/* This is the same as kmap_atomic() but can map memory that doesn't
+ * have a struct page associated with it.
+ */
+void *kmap_atomic_pfn(unsigned long pfn, enum km_type type)
+{
+	return kmap_atomic_prot_pfn(pfn, type, kmap_prot);
+}
 EXPORT_SYMBOL_GPL(kmap_atomic_pfn); /* temporarily in use by i915 GEM until vmap */
 
 struct page *kmap_atomic_to_page(void *ptr)

arch/x86/mm/iomap_32.c

@@ -18,6 +18,7 @@
 
 #include <asm/iomap.h>
 #include <asm/pat.h>
+#include <asm/highmem.h>
 #include <linux/module.h>
 
 int is_io_mapping_possible(resource_size_t base, unsigned long size)
@@ -36,11 +37,6 @@ EXPORT_SYMBOL_GPL(is_io_mapping_possible);
 void *
 iomap_atomic_prot_pfn(unsigned long pfn, enum km_type type, pgprot_t prot)
 {
-	enum fixed_addresses idx;
-	unsigned long vaddr;
-
-	pagefault_disable();
-
 	/*
 	 * For non-PAT systems, promote PAGE_KERNEL_WC to PAGE_KERNEL_UC_MINUS.
 	 * PAGE_KERNEL_WC maps to PWT, which translates to uncached if the
@@ -50,12 +46,7 @@ iomap_atomic_prot_pfn(unsigned long pfn, enum km_type type, pgprot_t prot)
 	if (!pat_enabled && pgprot_val(prot) == pgprot_val(PAGE_KERNEL_WC))
 		prot = PAGE_KERNEL_UC_MINUS;
 
-	idx = type + KM_TYPE_NR*smp_processor_id();
-	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
-	set_pte(kmap_pte-idx, pfn_pte(pfn, prot));
-	arch_flush_lazy_mmu_mode();
-
-	return (void*) vaddr;
+	return kmap_atomic_prot_pfn(pfn, type, prot);
 }
 EXPORT_SYMBOL_GPL(iomap_atomic_prot_pfn);
 

arch/x86/mm/kmmio.c

@@ -310,7 +310,7 @@ static int post_kmmio_handler(unsigned long condition, struct pt_regs *regs)
 	struct kmmio_context *ctx = &get_cpu_var(kmmio_ctx);
 
 	if (!ctx->active) {
-		pr_warning("kmmio: spurious debug trap on CPU %d.\n",
+		pr_debug("kmmio: spurious debug trap on CPU %d.\n",
 							smp_processor_id());
 		goto out;
 	}