提交 61cb27af 编写于 作者: A Andreas Oberritter 提交者: Mauro Carvalho Chehab

[media] DVB: dvb_frontend: rename parameters to parameters_in

- Preparation to distinguish input parameters from output parameters.
Signed-off-by: NAndreas Oberritter <obi@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
上级 e23d9ae3
......@@ -105,7 +105,7 @@ struct dvb_frontend_private {
/* thread/frontend values */
struct dvb_device *dvbdev;
struct dvb_frontend_parameters parameters;
struct dvb_frontend_parameters parameters_in;
struct dvb_fe_events events;
struct semaphore sem;
struct list_head list_head;
......@@ -160,7 +160,7 @@ static void dvb_frontend_add_event(struct dvb_frontend *fe, fe_status_t status)
e = &events->events[events->eventw];
memcpy (&e->parameters, &fepriv->parameters,
memcpy (&e->parameters, &fepriv->parameters_in,
sizeof (struct dvb_frontend_parameters));
if (status & FE_HAS_LOCK)
......@@ -277,12 +277,12 @@ static int dvb_frontend_swzigzag_autotune(struct dvb_frontend *fe, int check_wra
int ready = 0;
int fe_set_err = 0;
struct dvb_frontend_private *fepriv = fe->frontend_priv;
int original_inversion = fepriv->parameters.inversion;
u32 original_frequency = fepriv->parameters.frequency;
int original_inversion = fepriv->parameters_in.inversion;
u32 original_frequency = fepriv->parameters_in.frequency;
/* are we using autoinversion? */
autoinversion = ((!(fe->ops.info.caps & FE_CAN_INVERSION_AUTO)) &&
(fepriv->parameters.inversion == INVERSION_AUTO));
(fepriv->parameters_in.inversion == INVERSION_AUTO));
/* setup parameters correctly */
while(!ready) {
......@@ -348,18 +348,18 @@ static int dvb_frontend_swzigzag_autotune(struct dvb_frontend *fe, int check_wra
fepriv->auto_step, fepriv->auto_sub_step, fepriv->started_auto_step);
/* set the frontend itself */
fepriv->parameters.frequency += fepriv->lnb_drift;
fepriv->parameters_in.frequency += fepriv->lnb_drift;
if (autoinversion)
fepriv->parameters.inversion = fepriv->inversion;
fepriv->parameters_in.inversion = fepriv->inversion;
if (fe->ops.set_frontend)
fe_set_err = fe->ops.set_frontend(fe, &fepriv->parameters);
fe_set_err = fe->ops.set_frontend(fe, &fepriv->parameters_in);
if (fe_set_err < 0) {
fepriv->state = FESTATE_ERROR;
return fe_set_err;
}
fepriv->parameters.frequency = original_frequency;
fepriv->parameters.inversion = original_inversion;
fepriv->parameters_in.frequency = original_frequency;
fepriv->parameters_in.inversion = original_inversion;
fepriv->auto_sub_step++;
return 0;
......@@ -383,7 +383,7 @@ static void dvb_frontend_swzigzag(struct dvb_frontend *fe)
if (fepriv->state & FESTATE_RETUNE) {
if (fe->ops.set_frontend)
retval = fe->ops.set_frontend(fe,
&fepriv->parameters);
&fepriv->parameters_in);
if (retval < 0)
fepriv->state = FESTATE_ERROR;
else
......@@ -413,8 +413,8 @@ static void dvb_frontend_swzigzag(struct dvb_frontend *fe)
/* if we're tuned, then we have determined the correct inversion */
if ((!(fe->ops.info.caps & FE_CAN_INVERSION_AUTO)) &&
(fepriv->parameters.inversion == INVERSION_AUTO)) {
fepriv->parameters.inversion = fepriv->inversion;
(fepriv->parameters_in.inversion == INVERSION_AUTO)) {
fepriv->parameters_in.inversion = fepriv->inversion;
}
return;
}
......@@ -594,7 +594,7 @@ static int dvb_frontend_thread(void *data)
if (fepriv->state & FESTATE_RETUNE) {
dprintk("%s: Retune requested, FESTATE_RETUNE\n", __func__);
params = &fepriv->parameters;
params = &fepriv->parameters_in;
fepriv->state = FESTATE_TUNED;
}
......@@ -616,7 +616,7 @@ static int dvb_frontend_thread(void *data)
dprintk("%s: Frontend ALGO = DVBFE_ALGO_CUSTOM, state=%d\n", __func__, fepriv->state);
if (fepriv->state & FESTATE_RETUNE) {
dprintk("%s: Retune requested, FESTAT_RETUNE\n", __func__);
params = &fepriv->parameters;
params = &fepriv->parameters_in;
fepriv->state = FESTATE_TUNED;
}
/* Case where we are going to search for a carrier
......@@ -625,7 +625,7 @@ static int dvb_frontend_thread(void *data)
*/
if (fepriv->algo_status & DVBFE_ALGO_SEARCH_AGAIN) {
if (fe->ops.search) {
fepriv->algo_status = fe->ops.search(fe, &fepriv->parameters);
fepriv->algo_status = fe->ops.search(fe, &fepriv->parameters_in);
/* We did do a search as was requested, the flags are
* now unset as well and has the flags wrt to search.
*/
......@@ -636,7 +636,7 @@ static int dvb_frontend_thread(void *data)
/* Track the carrier if the search was successful */
if (fepriv->algo_status == DVBFE_ALGO_SEARCH_SUCCESS) {
if (fe->ops.track)
fe->ops.track(fe, &fepriv->parameters);
fe->ops.track(fe, &fepriv->parameters_in);
} else {
fepriv->algo_status |= DVBFE_ALGO_SEARCH_AGAIN;
fepriv->delay = HZ / 2;
......@@ -1076,7 +1076,7 @@ static void dtv_property_legacy_params_sync(struct dvb_frontend *fe)
{
const struct dtv_frontend_properties *c = &fe->dtv_property_cache;
struct dvb_frontend_private *fepriv = fe->frontend_priv;
struct dvb_frontend_parameters *p = &fepriv->parameters;
struct dvb_frontend_parameters *p = &fepriv->parameters_in;
p->frequency = c->frequency;
p->inversion = c->inversion;
......@@ -1124,7 +1124,7 @@ static void dtv_property_adv_params_sync(struct dvb_frontend *fe)
{
const struct dtv_frontend_properties *c = &fe->dtv_property_cache;
struct dvb_frontend_private *fepriv = fe->frontend_priv;
struct dvb_frontend_parameters *p = &fepriv->parameters;
struct dvb_frontend_parameters *p = &fepriv->parameters_in;
p->frequency = c->frequency;
p->inversion = c->inversion;
......@@ -1361,7 +1361,7 @@ static int dtv_property_process_set(struct dvb_frontend *fe,
dtv_property_cache_submit(fe);
r = dvb_frontend_ioctl_legacy(file, FE_SET_FRONTEND,
&fepriv->parameters);
&fepriv->parameters_in);
break;
case DTV_FREQUENCY:
fe->dtv_property_cache.frequency = tvp->u.data;
......@@ -1792,7 +1792,7 @@ static int dvb_frontend_ioctl_legacy(struct file *file,
struct dvb_frontend_tune_settings fetunesettings;
if(fe->dtv_property_cache.state == DTV_TUNE) {
if (dvb_frontend_check_parameters(fe, &fepriv->parameters) < 0) {
if (dvb_frontend_check_parameters(fe, &fepriv->parameters_in) < 0) {
err = -EINVAL;
break;
}
......@@ -1802,9 +1802,9 @@ static int dvb_frontend_ioctl_legacy(struct file *file,
break;
}
memcpy (&fepriv->parameters, parg,
memcpy (&fepriv->parameters_in, parg,
sizeof (struct dvb_frontend_parameters));
dtv_property_cache_sync(fe, &fepriv->parameters);
dtv_property_cache_sync(fe, &fepriv->parameters_in);
}
memset(&fetunesettings, 0, sizeof(struct dvb_frontend_tune_settings));
......@@ -1813,15 +1813,15 @@ static int dvb_frontend_ioctl_legacy(struct file *file,
/* force auto frequency inversion if requested */
if (dvb_force_auto_inversion) {
fepriv->parameters.inversion = INVERSION_AUTO;
fepriv->parameters_in.inversion = INVERSION_AUTO;
fetunesettings.parameters.inversion = INVERSION_AUTO;
}
if (fe->ops.info.type == FE_OFDM) {
/* without hierarchical coding code_rate_LP is irrelevant,
* so we tolerate the otherwise invalid FEC_NONE setting */
if (fepriv->parameters.u.ofdm.hierarchy_information == HIERARCHY_NONE &&
fepriv->parameters.u.ofdm.code_rate_LP == FEC_NONE)
fepriv->parameters.u.ofdm.code_rate_LP = FEC_AUTO;
if (fepriv->parameters_in.u.ofdm.hierarchy_information == HIERARCHY_NONE &&
fepriv->parameters_in.u.ofdm.code_rate_LP == FEC_NONE)
fepriv->parameters_in.u.ofdm.code_rate_LP = FEC_AUTO;
}
/* get frontend-specific tuning settings */
......@@ -1834,8 +1834,8 @@ static int dvb_frontend_ioctl_legacy(struct file *file,
switch(fe->ops.info.type) {
case FE_QPSK:
fepriv->min_delay = HZ/20;
fepriv->step_size = fepriv->parameters.u.qpsk.symbol_rate / 16000;
fepriv->max_drift = fepriv->parameters.u.qpsk.symbol_rate / 2000;
fepriv->step_size = fepriv->parameters_in.u.qpsk.symbol_rate / 16000;
fepriv->max_drift = fepriv->parameters_in.u.qpsk.symbol_rate / 2000;
break;
case FE_QAM:
......@@ -1877,7 +1877,7 @@ static int dvb_frontend_ioctl_legacy(struct file *file,
case FE_GET_FRONTEND:
if (fe->ops.get_frontend) {
memcpy (parg, &fepriv->parameters, sizeof (struct dvb_frontend_parameters));
memcpy (parg, &fepriv->parameters_in, sizeof (struct dvb_frontend_parameters));
err = fe->ops.get_frontend(fe, (struct dvb_frontend_parameters*) parg);
}
break;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册