提交 60f81f12 编写于 作者: F Florian Mickler 提交者: Mauro Carvalho Chehab

[media] vp702x: use preallocated buffer in the frontend

Note: This change is tested to compile only as I don't have the
hardware.
Signed-off-by: NFlorian Mickler <florian@mickler.org>
Cc: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
上级 ee52f120
......@@ -41,14 +41,13 @@ struct vp702x_fe_state {
static int vp702x_fe_refresh_state(struct vp702x_fe_state *st)
{
struct vp702x_device_state *dst = st->d->priv;
u8 *buf;
if (time_after(jiffies, st->next_status_check)) {
buf = kmalloc(10, GFP_KERNEL);
if (!buf) {
deb_fe("%s: buffer alloc failed\n", __func__);
return -ENOMEM;
}
mutex_lock(&dst->buf_mutex);
buf = dst->buf;
vp702x_usb_in_op(st->d, READ_STATUS, 0, 0, buf, 10);
st->lock = buf[4];
......@@ -58,9 +57,8 @@ static int vp702x_fe_refresh_state(struct vp702x_fe_state *st)
vp702x_usb_in_op(st->d, READ_TUNER_REG_REQ, 0x15, 0, buf, 1);
st->sig = buf[0];
mutex_unlock(&dst->buf_mutex);
st->next_status_check = jiffies + (st->status_check_interval*HZ)/1000;
kfree(buf);
}
return 0;
}
......@@ -141,15 +139,17 @@ static int vp702x_fe_set_frontend(struct dvb_frontend* fe,
struct dvb_frontend_parameters *fep)
{
struct vp702x_fe_state *st = fe->demodulator_priv;
struct vp702x_device_state *dst = st->d->priv;
u32 freq = fep->frequency/1000;
/*CalFrequency*/
/* u16 frequencyRef[16] = { 2, 4, 8, 16, 32, 64, 128, 256, 24, 5, 10, 20, 40, 80, 160, 320 }; */
u64 sr;
u8 *cmd;
cmd = kzalloc(10, GFP_KERNEL);
if (!cmd)
return -ENOMEM;
mutex_lock(&dst->buf_mutex);
cmd = dst->buf;
memset(cmd, 0, 10);
cmd[0] = (freq >> 8) & 0x7f;
cmd[1] = freq & 0xff;
......@@ -192,7 +192,8 @@ static int vp702x_fe_set_frontend(struct dvb_frontend* fe,
else
deb_fe("tuning succeeded.\n");
kfree(cmd);
mutex_unlock(&dst->buf_mutex);
return 0;
}
......@@ -220,21 +221,18 @@ static int vp702x_fe_get_frontend(struct dvb_frontend* fe,
static int vp702x_fe_send_diseqc_msg (struct dvb_frontend* fe,
struct dvb_diseqc_master_cmd *m)
{
int ret;
u8 *cmd;
struct vp702x_fe_state *st = fe->demodulator_priv;
cmd = kzalloc(10, GFP_KERNEL);
if (!cmd)
return -ENOMEM;
struct vp702x_device_state *dst = st->d->priv;
deb_fe("%s\n",__func__);
if (m->msg_len > 4) {
ret = -EINVAL;
goto out;
}
if (m->msg_len > 4)
return -EINVAL;
mutex_lock(&dst->buf_mutex);
cmd = dst->buf;
cmd[1] = SET_DISEQC_CMD;
cmd[2] = m->msg_len;
memcpy(&cmd[3], m->msg, m->msg_len);
......@@ -246,10 +244,10 @@ static int vp702x_fe_send_diseqc_msg (struct dvb_frontend* fe,
deb_fe("diseqc cmd failed.\n");
else
deb_fe("diseqc cmd succeeded.\n");
ret = 0;
out:
kfree(cmd);
return ret;
mutex_unlock(&dst->buf_mutex);
return 0;
}
static int vp702x_fe_send_diseqc_burst (struct dvb_frontend* fe, fe_sec_mini_cmd_t burst)
......@@ -261,14 +259,11 @@ static int vp702x_fe_send_diseqc_burst (struct dvb_frontend* fe, fe_sec_mini_cmd
static int vp702x_fe_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
{
struct vp702x_fe_state *st = fe->demodulator_priv;
struct vp702x_device_state *dst = st->d->priv;
u8 *buf;
deb_fe("%s\n",__func__);
buf = kmalloc(10, GFP_KERNEL);
if (!buf)
return -ENOMEM;
st->tone_mode = tone;
if (tone == SEC_TONE_ON)
......@@ -277,6 +272,10 @@ static int vp702x_fe_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
st->lnb_buf[2] = 0x00;
st->lnb_buf[7] = vp702x_chksum(st->lnb_buf, 0, 7);
mutex_lock(&dst->buf_mutex);
buf = dst->buf;
memcpy(buf, st->lnb_buf, 8);
vp702x_usb_inout_op(st->d, buf, 8, buf, 10, 100);
......@@ -285,7 +284,8 @@ static int vp702x_fe_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
else
deb_fe("set_tone cmd succeeded.\n");
kfree(buf);
mutex_unlock(&dst->buf_mutex);
return 0;
}
......@@ -293,13 +293,10 @@ static int vp702x_fe_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t
voltage)
{
struct vp702x_fe_state *st = fe->demodulator_priv;
struct vp702x_device_state *dst = st->d->priv;
u8 *buf;
deb_fe("%s\n",__func__);
buf = kmalloc(10, GFP_KERNEL);
if (!buf)
return -ENOMEM;
st->voltage = voltage;
if (voltage != SEC_VOLTAGE_OFF)
......@@ -308,6 +305,10 @@ static int vp702x_fe_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t
st->lnb_buf[4] = 0x00;
st->lnb_buf[7] = vp702x_chksum(st->lnb_buf, 0, 7);
mutex_lock(&dst->buf_mutex);
buf = dst->buf;
memcpy(buf, st->lnb_buf, 8);
vp702x_usb_inout_op(st->d, buf, 8, buf, 10, 100);
......@@ -316,7 +317,7 @@ static int vp702x_fe_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t
else
deb_fe("set_voltage cmd succeeded.\n");
kfree(buf);
mutex_unlock(&dst->buf_mutex);
return 0;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册