提交 607eeb0b 编写于 作者: L Linus Torvalds

Merge tag 'stable/for-linus-3.10-rc0-tag-two' of...

Merge tag 'stable/for-linus-3.10-rc0-tag-two' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

Pull Xen bug-fixes from Konrad Rzeszutek Wilk:
 - More fixes in the vCPU PVHVM hotplug path.
 - Add more documentation.
 - Fix various ARM related issues in the Xen generic drivers.
 - Updates in the xen-pciback driver per Bjorn's updates.
 - Mask the x2APIC feature for PV guests.

* tag 'stable/for-linus-3.10-rc0-tag-two' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/pci: Used cached MSI-X capability offset
  xen/pci: Use PCI_MSIX_TABLE_BIR, not PCI_MSIX_FLAGS_BIRMASK
  xen: clear IRQ_NOAUTOEN and IRQ_NOREQUEST
  xen: mask x2APIC feature in PV
  xen: SWIOTLB is only used on x86
  xen/spinlock: Fix check from greater than to be also be greater or equal to.
  xen/smp/pvhvm: Don't point per_cpu(xen_vpcu, 33 and larger) to shared_info
  xen/vcpu: Document the xen_vcpu_info and xen_vcpu
  xen/vcpu/pvhvm: Fix vcpu hotplugging hanging.
......@@ -295,11 +295,10 @@ static int xen_initdom_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
int pos;
u32 table_offset, bir;
pos = pci_find_capability(dev, PCI_CAP_ID_MSIX);
pos = dev->msix_cap;
pci_read_config_dword(dev, pos + PCI_MSIX_TABLE,
&table_offset);
bir = (u8)(table_offset & PCI_MSIX_FLAGS_BIRMASK);
bir = (u8)(table_offset & PCI_MSIX_TABLE_BIR);
map_irq.table_base = pci_resource_start(dev, bir);
map_irq.entry_nr = msidesc->msi_attrib.entry_nr;
......
......@@ -85,7 +85,29 @@
EXPORT_SYMBOL_GPL(hypercall_page);
/*
* Pointer to the xen_vcpu_info structure or
* &HYPERVISOR_shared_info->vcpu_info[cpu]. See xen_hvm_init_shared_info
* and xen_vcpu_setup for details. By default it points to share_info->vcpu_info
* but if the hypervisor supports VCPUOP_register_vcpu_info then it can point
* to xen_vcpu_info. The pointer is used in __xen_evtchn_do_upcall to
* acknowledge pending events.
* Also more subtly it is used by the patched version of irq enable/disable
* e.g. xen_irq_enable_direct and xen_iret in PV mode.
*
* The desire to be able to do those mask/unmask operations as a single
* instruction by using the per-cpu offset held in %gs is the real reason
* vcpu info is in a per-cpu pointer and the original reason for this
* hypercall.
*
*/
DEFINE_PER_CPU(struct vcpu_info *, xen_vcpu);
/*
* Per CPU pages used if hypervisor supports VCPUOP_register_vcpu_info
* hypercall. This can be used both in PV and PVHVM mode. The structure
* overrides the default per_cpu(xen_vcpu, cpu) value.
*/
DEFINE_PER_CPU(struct vcpu_info, xen_vcpu_info);
enum xen_domain_type xen_domain_type = XEN_NATIVE;
......@@ -157,6 +179,21 @@ static void xen_vcpu_setup(int cpu)
BUG_ON(HYPERVISOR_shared_info == &xen_dummy_shared_info);
/*
* This path is called twice on PVHVM - first during bootup via
* smp_init -> xen_hvm_cpu_notify, and then if the VCPU is being
* hotplugged: cpu_up -> xen_hvm_cpu_notify.
* As we can only do the VCPUOP_register_vcpu_info once lets
* not over-write its result.
*
* For PV it is called during restore (xen_vcpu_restore) and bootup
* (xen_setup_vcpu_info_placement). The hotplug mechanism does not
* use this function.
*/
if (xen_hvm_domain()) {
if (per_cpu(xen_vcpu, cpu) == &per_cpu(xen_vcpu_info, cpu))
return;
}
if (cpu < MAX_VIRT_CPUS)
per_cpu(xen_vcpu,cpu) = &HYPERVISOR_shared_info->vcpu_info[cpu];
......@@ -172,7 +209,12 @@ static void xen_vcpu_setup(int cpu)
/* Check to see if the hypervisor will put the vcpu_info
structure where we want it, which allows direct access via
a percpu-variable. */
a percpu-variable.
N.B. This hypercall can _only_ be called once per CPU. Subsequent
calls will error out with -EINVAL. This is due to the fact that
hypervisor has no unregister variant and this hypercall does not
allow to over-write info.mfn and info.offset.
*/
err = HYPERVISOR_vcpu_op(VCPUOP_register_vcpu_info, cpu, &info);
if (err) {
......@@ -387,6 +429,9 @@ static void __init xen_init_cpuid_mask(void)
cpuid_leaf1_edx_mask &=
~((1 << X86_FEATURE_APIC) | /* disable local APIC */
(1 << X86_FEATURE_ACPI)); /* disable ACPI */
cpuid_leaf1_ecx_mask &= ~(1 << (X86_FEATURE_X2APIC % 32));
ax = 1;
cx = 0;
xen_cpuid(&ax, &bx, &cx, &dx);
......@@ -1603,6 +1648,9 @@ void __ref xen_hvm_init_shared_info(void)
* online but xen_hvm_init_shared_info is run at resume time too and
* in that case multiple vcpus might be online. */
for_each_online_cpu(cpu) {
/* Leave it to be NULL. */
if (cpu >= MAX_VIRT_CPUS)
continue;
per_cpu(xen_vcpu, cpu) = &HYPERVISOR_shared_info->vcpu_info[cpu];
}
}
......
......@@ -364,7 +364,7 @@ void __cpuinit xen_init_lock_cpu(int cpu)
int irq;
const char *name;
WARN(per_cpu(lock_kicker_irq, cpu) > 0, "spinlock on CPU%d exists on IRQ%d!\n",
WARN(per_cpu(lock_kicker_irq, cpu) >= 0, "spinlock on CPU%d exists on IRQ%d!\n",
cpu, per_cpu(lock_kicker_irq, cpu));
/*
......
......@@ -141,7 +141,7 @@ config XEN_GRANT_DEV_ALLOC
config SWIOTLB_XEN
def_bool y
depends on PCI
depends on PCI && X86
select SWIOTLB
config XEN_TMEM
......
......@@ -167,6 +167,8 @@ static void xen_irq_info_common_init(struct irq_info *info,
info->cpu = cpu;
evtchn_to_irq[evtchn] = irq;
irq_clear_status_flags(irq, IRQ_NOREQUEST|IRQ_NOAUTOEN);
}
static void xen_irq_info_evtchn_init(unsigned irq,
......@@ -874,7 +876,6 @@ int bind_evtchn_to_irq(unsigned int evtchn)
struct irq_info *info = info_for_irq(irq);
WARN_ON(info == NULL || info->type != IRQT_EVTCHN);
}
irq_clear_status_flags(irq, IRQ_NOREQUEST|IRQ_NOAUTOEN);
out:
mutex_unlock(&irq_mapping_update_lock);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册