OMAPDSS: Add NEC NL8048HL11 panel driver

Add NEC NL8048HL11 panel driver which uses the new DSS device model
and DSS ops.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

drivers/video/omap2/displays-new/Kconfig

@@ -62,4 +62,12 @@ config DISPLAY_PANEL_TPO_TD043MTEA1
         help
           LCD Panel used in OMAP3 Pandora
 
+config DISPLAY_PANEL_NEC_NL8048HL11
+	tristate "NEC NL8048HL11 Panel"
+	depends on SPI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+		This NEC NL8048HL11 panel is TFT LCD used in the
+		Zoom2/3/3630 sdp boards.
+
 endmenu

drivers/video/omap2/displays-new/Makefile

@@ -9,3 +9,4 @@ obj-$(CONFIG_DISPLAY_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
 obj-$(CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02) += panel-lgphilips-lb035q02.o
 obj-$(CONFIG_DISPLAY_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
 obj-$(CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
+obj-$(CONFIG_DISPLAY_PANEL_NEC_NL8048HL11) += panel-nec-nl8048hl11.o

drivers/video/omap2/displays-new/panel-nec-nl8048hl11.c

+/*
+ * NEC NL8048HL11 Panel driver
+ *
+ * Copyright (C) 2010 Texas Instruments Inc.
+ * Author: Erik Gilling <konkers@android.com>
+ * Converted to new DSS device model: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+
+#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+
+struct panel_drv_data {
+	struct omap_dss_device	dssdev;
+	struct omap_dss_device *in;
+
+	struct omap_video_timings videomode;
+
+	int data_lines;
+
+	int res_gpio;
+	int qvga_gpio;
+
+	struct spi_device *spi;
+};
+
+#define LCD_XRES		800
+#define LCD_YRES		480
+/*
+ * NEC PIX Clock Ratings
+ * MIN:21.8MHz TYP:23.8MHz MAX:25.7MHz
+ */
+#define LCD_PIXEL_CLOCK		23800
+
+static const struct {
+	unsigned char addr;
+	unsigned char dat;
+} nec_8048_init_seq[] = {
+	{ 3, 0x01 }, { 0, 0x00 }, { 1, 0x01 }, { 4, 0x00 }, { 5, 0x14 },
+	{ 6, 0x24 }, { 16, 0xD7 }, { 17, 0x00 }, { 18, 0x00 }, { 19, 0x55 },
+	{ 20, 0x01 }, { 21, 0x70 }, { 22, 0x1E }, { 23, 0x25 },	{ 24, 0x25 },
+	{ 25, 0x02 }, { 26, 0x02 }, { 27, 0xA0 }, { 32, 0x2F }, { 33, 0x0F },
+	{ 34, 0x0F }, { 35, 0x0F }, { 36, 0x0F }, { 37, 0x0F },	{ 38, 0x0F },
+	{ 39, 0x00 }, { 40, 0x02 }, { 41, 0x02 }, { 42, 0x02 },	{ 43, 0x0F },
+	{ 44, 0x0F }, { 45, 0x0F }, { 46, 0x0F }, { 47, 0x0F },	{ 48, 0x0F },
+	{ 49, 0x0F }, { 50, 0x00 }, { 51, 0x02 }, { 52, 0x02 }, { 53, 0x02 },
+	{ 80, 0x0C }, { 83, 0x42 }, { 84, 0x42 }, { 85, 0x41 },	{ 86, 0x14 },
+	{ 89, 0x88 }, { 90, 0x01 }, { 91, 0x00 }, { 92, 0x02 },	{ 93, 0x0C },
+	{ 94, 0x1C }, { 95, 0x27 }, { 98, 0x49 }, { 99, 0x27 }, { 102, 0x76 },
+	{ 103, 0x27 }, { 112, 0x01 }, { 113, 0x0E }, { 114, 0x02 },
+	{ 115, 0x0C }, { 118, 0x0C }, { 121, 0x30 }, { 130, 0x00 },
+	{ 131, 0x00 }, { 132, 0xFC }, { 134, 0x00 }, { 136, 0x00 },
+	{ 138, 0x00 }, { 139, 0x00 }, { 140, 0x00 }, { 141, 0xFC },
+	{ 143, 0x00 }, { 145, 0x00 }, { 147, 0x00 }, { 148, 0x00 },
+	{ 149, 0x00 }, { 150, 0xFC }, { 152, 0x00 }, { 154, 0x00 },
+	{ 156, 0x00 }, { 157, 0x00 }, { 2, 0x00 },
+};
+
+static const struct omap_video_timings nec_8048_panel_timings = {
+	.x_res		= LCD_XRES,
+	.y_res		= LCD_YRES,
+	.pixel_clock	= LCD_PIXEL_CLOCK,
+	.hfp		= 6,
+	.hsw		= 1,
+	.hbp		= 4,
+	.vfp		= 3,
+	.vsw		= 1,
+	.vbp		= 4,
+
+	.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
+	.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
+	.data_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
+	.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
+	.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
+};
+
+#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
+
+static int nec_8048_spi_send(struct spi_device *spi, unsigned char reg_addr,
+			unsigned char reg_data)
+{
+	int ret = 0;
+	unsigned int cmd = 0, data = 0;
+
+	cmd = 0x0000 | reg_addr; /* register address write */
+	data = 0x0100 | reg_data; /* register data write */
+	data = (cmd << 16) | data;
+
+	ret = spi_write(spi, (unsigned char *)&data, 4);
+	if (ret)
+		pr_err("error in spi_write %x\n", data);
+
+	return ret;
+}
+
+static int init_nec_8048_wvga_lcd(struct spi_device *spi)
+{
+	unsigned int i;
+	/* Initialization Sequence */
+	/* nec_8048_spi_send(spi, REG, VAL) */
+	for (i = 0; i < (ARRAY_SIZE(nec_8048_init_seq) - 1); i++)
+		nec_8048_spi_send(spi, nec_8048_init_seq[i].addr,
+				nec_8048_init_seq[i].dat);
+	udelay(20);
+	nec_8048_spi_send(spi, nec_8048_init_seq[i].addr,
+				nec_8048_init_seq[i].dat);
+	return 0;
+}
+
+static int nec_8048_connect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (omapdss_device_is_connected(dssdev))
+		return 0;
+
+	r = in->ops.dpi->connect(in, dssdev);
+	if (r)
+		return r;
+
+	return 0;
+}
+
+static void nec_8048_disconnect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (!omapdss_device_is_connected(dssdev))
+		return;
+
+	in->ops.dpi->disconnect(in, dssdev);
+}
+
+static int nec_8048_enable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (!omapdss_device_is_connected(dssdev))
+		return -ENODEV;
+
+	if (omapdss_device_is_enabled(dssdev))
+		return 0;
+
+	in->ops.dpi->set_data_lines(in, ddata->data_lines);
+	in->ops.dpi->set_timings(in, &ddata->videomode);
+
+	r = in->ops.dpi->enable(in);
+	if (r)
+		return r;
+
+	if (gpio_is_valid(ddata->res_gpio))
+		gpio_set_value_cansleep(ddata->res_gpio, 1);
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	return 0;
+}
+
+static void nec_8048_disable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (!omapdss_device_is_enabled(dssdev))
+		return;
+
+	if (gpio_is_valid(ddata->res_gpio))
+		gpio_set_value_cansleep(ddata->res_gpio, 0);
+
+	in->ops.dpi->disable(in);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static void nec_8048_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	ddata->videomode = *timings;
+	dssdev->panel.timings = *timings;
+
+	in->ops.dpi->set_timings(in, timings);
+}
+
+static void nec_8048_get_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+	*timings = ddata->videomode;
+}
+
+static int nec_8048_check_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	return in->ops.dpi->check_timings(in, timings);
+}
+
+static struct omap_dss_driver nec_8048_ops = {
+	.connect	= nec_8048_connect,
+	.disconnect	= nec_8048_disconnect,
+
+	.enable		= nec_8048_enable,
+	.disable	= nec_8048_disable,
+
+	.set_timings	= nec_8048_set_timings,
+	.get_timings	= nec_8048_get_timings,
+	.check_timings	= nec_8048_check_timings,
+
+	.get_resolution	= omapdss_default_get_resolution,
+};
+
+
+static int nec_8048_probe_pdata(struct spi_device *spi)
+{
+	const struct panel_nec_nl8048hl11_platform_data *pdata;
+	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+	struct omap_dss_device *dssdev, *in;
+
+	pdata = dev_get_platdata(&spi->dev);
+
+	ddata->qvga_gpio = pdata->qvga_gpio;
+	ddata->res_gpio = pdata->res_gpio;
+
+	in = omap_dss_find_output(pdata->source);
+	if (in == NULL) {
+		dev_err(&spi->dev, "failed to find video source '%s'\n",
+				pdata->source);
+		return -EPROBE_DEFER;
+	}
+	ddata->in = in;
+
+	ddata->data_lines = pdata->data_lines;
+
+	dssdev = &ddata->dssdev;
+	dssdev->name = pdata->name;
+
+	return 0;
+}
+
+static int nec_8048_probe(struct spi_device *spi)
+{
+	struct panel_drv_data *ddata;
+	struct omap_dss_device *dssdev;
+	int r;
+
+	dev_dbg(&spi->dev, "%s\n", __func__);
+
+	spi->mode = SPI_MODE_0;
+	spi->bits_per_word = 32;
+
+	r = spi_setup(spi);
+	if (r < 0) {
+		dev_err(&spi->dev, "spi_setup failed: %d\n", r);
+		return r;
+	}
+
+	init_nec_8048_wvga_lcd(spi);
+
+	ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
+	if (ddata == NULL)
+		return -ENOMEM;
+
+	dev_set_drvdata(&spi->dev, ddata);
+
+	ddata->spi = spi;
+
+	if (dev_get_platdata(&spi->dev)) {
+		r = nec_8048_probe_pdata(spi);
+		if (r)
+			return r;
+	} else {
+		return -ENODEV;
+	}
+
+	if (gpio_is_valid(ddata->qvga_gpio)) {
+		r = devm_gpio_request_one(&spi->dev, ddata->qvga_gpio,
+				GPIOF_OUT_INIT_HIGH, "lcd QVGA");
+		if (r)
+			goto err_gpio;
+	}
+
+	if (gpio_is_valid(ddata->res_gpio)) {
+		r = devm_gpio_request_one(&spi->dev, ddata->res_gpio,
+				GPIOF_OUT_INIT_LOW, "lcd RES");
+		if (r)
+			goto err_gpio;
+	}
+
+	ddata->videomode = nec_8048_panel_timings;
+
+	dssdev = &ddata->dssdev;
+	dssdev->dev = &spi->dev;
+	dssdev->driver = &nec_8048_ops;
+	dssdev->type = OMAP_DISPLAY_TYPE_DPI;
+	dssdev->owner = THIS_MODULE;
+	dssdev->panel.timings = ddata->videomode;
+
+	r = omapdss_register_display(dssdev);
+	if (r) {
+		dev_err(&spi->dev, "Failed to register panel\n");
+		goto err_reg;
+	}
+
+	return 0;
+
+err_reg:
+err_gpio:
+	omap_dss_put_device(ddata->in);
+	return r;
+}
+
+static int nec_8048_remove(struct spi_device *spi)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+	struct omap_dss_device *dssdev = &ddata->dssdev;
+	struct omap_dss_device *in = ddata->in;
+
+	dev_dbg(&ddata->spi->dev, "%s\n", __func__);
+
+	omapdss_unregister_display(dssdev);
+
+	nec_8048_disable(dssdev);
+	nec_8048_disconnect(dssdev);
+
+	omap_dss_put_device(in);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int nec_8048_suspend(struct device *dev)
+{
+	struct spi_device *spi = to_spi_device(dev);
+
+	nec_8048_spi_send(spi, 2, 0x01);
+	mdelay(40);
+
+	return 0;
+}
+
+static int nec_8048_resume(struct device *dev)
+{
+	struct spi_device *spi = to_spi_device(dev);
+
+	/* reinitialize the panel */
+	spi_setup(spi);
+	nec_8048_spi_send(spi, 2, 0x00);
+	init_nec_8048_wvga_lcd(spi);
+
+	return 0;
+}
+static SIMPLE_DEV_PM_OPS(nec_8048_pm_ops, nec_8048_suspend,
+		nec_8048_resume);
+#define NEC_8048_PM_OPS (&nec_8048_pm_ops)
+#else
+#define NEC_8048_PM_OPS NULL
+#endif
+
+static struct spi_driver nec_8048_driver = {
+	.driver = {
+		.name	= "panel-nec-nl8048hl11",
+		.owner	= THIS_MODULE,
+		.pm	= NEC_8048_PM_OPS,
+	},
+	.probe	= nec_8048_probe,
+	.remove	= nec_8048_remove,
+};
+
+module_spi_driver(nec_8048_driver);
+
+MODULE_AUTHOR("Erik Gilling <konkers@android.com>");
+MODULE_DESCRIPTION("NEC-NL8048HL11 Driver");
+MODULE_LICENSE("GPL");

include/video/omap-panel-data.h

@@ -338,4 +338,22 @@ struct panel_tpo_td043mtea1_platform_data {
 	int nreset_gpio;
 };
 
+/**
+ * panel-nec-nl8048hl11 platform data
+ * @name: name for this display entity
+ * @source: name of the display entity used as a video source
+ * @data_lines: number of DPI datalines
+ * @res_gpio: reset signal
+ * @qvga_gpio: selection for resolution(QVGA/WVGA)
+ */
+struct panel_nec_nl8048hl11_platform_data {
+	const char *name;
+	const char *source;
+
+	int data_lines;
+
+	int res_gpio;
+	int qvga_gpio;
+};
+
 #endif /* __OMAP_PANEL_DATA_H */