提交 5fd9f523 编写于 作者: V Ville Syrjälä

drm/i915: Set GPU freq to idle_freq initially

Currently we set the initial GPU frequency to min_freq_softlimit
on gen9, and to efficient_freq on VLV/CHV. On all the other platforms
we set it to idle_freq. Let's use idle_freq across the board to make
sure we don't waste power. This is especially relevant for VLV since
Vnn won't drop to minimum unless the GPU is at the minimum frequency.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1457120584-26080-3-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NImre Deak <imre.deak@intel.com>
上级 c30fec65
......@@ -4808,7 +4808,7 @@ static void gen9_enable_rps(struct drm_device *dev)
* Up/Down EI & threshold registers, as well as the RP_CONTROL,
* RP_INTERRUPT_LIMITS & RPNSWREQ registers */
dev_priv->rps.power = HIGH_POWER; /* force a reset */
gen6_set_rps(dev_priv->dev, dev_priv->rps.min_freq_softlimit);
gen6_set_rps(dev_priv->dev, dev_priv->rps.idle_freq);
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
}
......@@ -5595,10 +5595,10 @@ static void cherryview_enable_rps(struct drm_device *dev)
dev_priv->rps.cur_freq);
DRM_DEBUG_DRIVER("setting GPU freq to %d MHz (%u)\n",
intel_gpu_freq(dev_priv, dev_priv->rps.efficient_freq),
dev_priv->rps.efficient_freq);
intel_gpu_freq(dev_priv, dev_priv->rps.idle_freq),
dev_priv->rps.idle_freq);
valleyview_set_rps(dev_priv->dev, dev_priv->rps.efficient_freq);
valleyview_set_rps(dev_priv->dev, dev_priv->rps.idle_freq);
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
}
......@@ -5684,10 +5684,10 @@ static void valleyview_enable_rps(struct drm_device *dev)
dev_priv->rps.cur_freq);
DRM_DEBUG_DRIVER("setting GPU freq to %d MHz (%u)\n",
intel_gpu_freq(dev_priv, dev_priv->rps.efficient_freq),
dev_priv->rps.efficient_freq);
intel_gpu_freq(dev_priv, dev_priv->rps.idle_freq),
dev_priv->rps.idle_freq);
valleyview_set_rps(dev_priv->dev, dev_priv->rps.efficient_freq);
valleyview_set_rps(dev_priv->dev, dev_priv->rps.idle_freq);
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册