提交 5efc3ad7 编写于 作者: G Gavin Shan 提交者: Benjamin Herrenschmidt

powerpc/eeh: Introduce EEH_PE_INVALID type PE

When EEH error happens on the PE whose PCI devices don't have
attached drivers. In function eeh_handle_event(), the default
value PCI_ERS_RESULT_NONE will be returned after iterating all
drivers of those PCI devices belonging to the PE. Actually, we
don't have installed drivers for the PCI devices. Under the
circumstance, we will remove the corresponding PCI bus of the PE,
including the associated EEH devices and PE instance. However,
we still need the information stored in the PE instance to do PE
reset after that. So it's unsafe to free the PE instance.

The patch introduces EEH_PE_INVALID type PE to address the issue.
When the PCI bus and the corresponding attached EEH devices are
removed, we will mark the PE as EEH_PE_INVALID. At later point,
the PE will be changed to EEH_PE_DEVICE or EEH_PE_BUS when the
corresponding EEH devices are attached again.
Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
上级 ddadb6b8
......@@ -45,9 +45,10 @@ struct device_node;
* in the corresponding PHB. Therefore, the root PEs should be created
* against existing PHBs in on-to-one fashion.
*/
#define EEH_PE_PHB 1 /* PHB PE */
#define EEH_PE_DEVICE 2 /* Device PE */
#define EEH_PE_BUS 3 /* Bus PE */
#define EEH_PE_INVALID (1 << 0) /* Invalid */
#define EEH_PE_PHB (1 << 1) /* PHB PE */
#define EEH_PE_DEVICE (1 << 2) /* Device PE */
#define EEH_PE_BUS (1 << 3) /* Bus PE */
#define EEH_PE_ISOLATED (1 << 0) /* Isolated PE */
#define EEH_PE_RECOVERING (1 << 1) /* Recovering PE */
......
......@@ -107,7 +107,7 @@ static struct eeh_pe *eeh_phb_pe_get(struct pci_controller *phb)
* the PE for PHB has been determined when that
* was created.
*/
if (pe->type == EEH_PE_PHB &&
if ((pe->type & EEH_PE_PHB) &&
pe->phb == phb) {
eeh_unlock();
return pe;
......@@ -219,7 +219,7 @@ static void *__eeh_pe_get(void *data, void *flag)
struct eeh_dev *edev = (struct eeh_dev *)flag;
/* Unexpected PHB PE */
if (pe->type == EEH_PE_PHB)
if (pe->type & EEH_PE_PHB)
return NULL;
/* We prefer PE address */
......@@ -314,7 +314,7 @@ int eeh_add_to_parent_pe(struct eeh_dev *edev)
* components.
*/
pe = eeh_pe_get(edev);
if (pe) {
if (pe && !(pe->type & EEH_PE_INVALID)) {
if (!edev->pe_config_addr) {
pr_err("%s: PE with addr 0x%x already exists\n",
__func__, edev->config_addr);
......@@ -330,6 +330,24 @@ int eeh_add_to_parent_pe(struct eeh_dev *edev)
pr_debug("EEH: Add %s to Bus PE#%x\n",
edev->dn->full_name, pe->addr);
return 0;
} else if (pe && (pe->type & EEH_PE_INVALID)) {
list_add_tail(&edev->list, &pe->edevs);
edev->pe = pe;
/*
* We're running to here because of PCI hotplug caused by
* EEH recovery. We need clear EEH_PE_INVALID until the top.
*/
parent = pe;
while (parent) {
if (!(parent->type & EEH_PE_INVALID))
break;
parent->type &= ~EEH_PE_INVALID;
parent = parent->parent;
}
pr_debug("EEH: Add %s to Device PE#%x, Parent PE#%x\n",
edev->dn->full_name, pe->addr, pe->parent->addr);
return 0;
}
......@@ -385,7 +403,8 @@ int eeh_add_to_parent_pe(struct eeh_dev *edev)
*/
int eeh_rmv_from_parent_pe(struct eeh_dev *edev)
{
struct eeh_pe *pe, *parent;
struct eeh_pe *pe, *parent, *child;
int cnt;
if (!edev->pe) {
pr_warning("%s: No PE found for EEH device %s\n",
......@@ -406,13 +425,22 @@ int eeh_rmv_from_parent_pe(struct eeh_dev *edev)
*/
while (1) {
parent = pe->parent;
if (pe->type == EEH_PE_PHB)
if (pe->type & EEH_PE_PHB)
break;
if (list_empty(&pe->edevs) &&
list_empty(&pe->child_list)) {
list_del(&pe->child);
kfree(pe);
if (list_empty(&pe->edevs)) {
cnt = 0;
list_for_each_entry(child, &pe->child_list, child) {
if (!(pe->type & EEH_PE_INVALID)) {
cnt++;
break;
}
}
if (!cnt)
pe->type |= EEH_PE_INVALID;
else
break;
}
pe = parent;
......@@ -578,9 +606,9 @@ struct pci_bus *eeh_pe_bus_get(struct eeh_pe *pe)
struct eeh_dev *edev;
struct pci_dev *pdev;
if (pe->type == EEH_PE_PHB) {
if (pe->type & EEH_PE_PHB) {
bus = pe->phb->bus;
} else if (pe->type == EEH_PE_BUS) {
} else if (pe->type & EEH_PE_BUS) {
edev = list_first_entry(&pe->edevs, struct eeh_dev, list);
pdev = eeh_dev_to_pci_dev(edev);
if (pdev)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册