提交 5ef5da0f 编写于 作者: K Kalle Valo 提交者: John W. Linville

wl1251: remove unused definitions from wl1251_reg.h

Luis reported that IRQ_MASK conflicts with include/pcmcia/cs.h on
compat-wireless. Remove that and a bunch of other unused defines
from wl1251_reg.h.
Reported-by: NLuis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: NKalle Valo <kalle.valo@nokia.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 11aa6e23
...@@ -42,70 +42,6 @@ ...@@ -42,70 +42,6 @@
/* ELP WLAN_READY bit */ /* ELP WLAN_READY bit */
#define ELPCTRL_WLAN_READY 0x2 #define ELPCTRL_WLAN_READY 0x2
/*
* Interrupt registers.
* 64 bit interrupt sources registers ws ced.
* sme interupts were removed and new ones were added.
* Order was changed.
*/
#define FIQ_MASK (REGISTERS_BASE + 0x0400)
#define FIQ_MASK_L (REGISTERS_BASE + 0x0400)
#define FIQ_MASK_H (REGISTERS_BASE + 0x0404)
#define FIQ_MASK_SET (REGISTERS_BASE + 0x0408)
#define FIQ_MASK_SET_L (REGISTERS_BASE + 0x0408)
#define FIQ_MASK_SET_H (REGISTERS_BASE + 0x040C)
#define FIQ_MASK_CLR (REGISTERS_BASE + 0x0410)
#define FIQ_MASK_CLR_L (REGISTERS_BASE + 0x0410)
#define FIQ_MASK_CLR_H (REGISTERS_BASE + 0x0414)
#define IRQ_MASK (REGISTERS_BASE + 0x0418)
#define IRQ_MASK_L (REGISTERS_BASE + 0x0418)
#define IRQ_MASK_H (REGISTERS_BASE + 0x041C)
#define IRQ_MASK_SET (REGISTERS_BASE + 0x0420)
#define IRQ_MASK_SET_L (REGISTERS_BASE + 0x0420)
#define IRQ_MASK_SET_H (REGISTERS_BASE + 0x0424)
#define IRQ_MASK_CLR (REGISTERS_BASE + 0x0428)
#define IRQ_MASK_CLR_L (REGISTERS_BASE + 0x0428)
#define IRQ_MASK_CLR_H (REGISTERS_BASE + 0x042C)
#define ECPU_MASK (REGISTERS_BASE + 0x0448)
#define FIQ_STS_L (REGISTERS_BASE + 0x044C)
#define FIQ_STS_H (REGISTERS_BASE + 0x0450)
#define IRQ_STS_L (REGISTERS_BASE + 0x0454)
#define IRQ_STS_H (REGISTERS_BASE + 0x0458)
#define INT_STS_ND (REGISTERS_BASE + 0x0464)
#define INT_STS_RAW_L (REGISTERS_BASE + 0x0464)
#define INT_STS_RAW_H (REGISTERS_BASE + 0x0468)
#define INT_STS_CLR (REGISTERS_BASE + 0x04B4)
#define INT_STS_CLR_L (REGISTERS_BASE + 0x04B4)
#define INT_STS_CLR_H (REGISTERS_BASE + 0x04B8)
#define INT_ACK (REGISTERS_BASE + 0x046C)
#define INT_ACK_L (REGISTERS_BASE + 0x046C)
#define INT_ACK_H (REGISTERS_BASE + 0x0470)
#define INT_TRIG (REGISTERS_BASE + 0x0474)
#define INT_TRIG_L (REGISTERS_BASE + 0x0474)
#define INT_TRIG_H (REGISTERS_BASE + 0x0478)
#define HOST_STS_L (REGISTERS_BASE + 0x045C)
#define HOST_STS_H (REGISTERS_BASE + 0x0460)
#define HOST_MASK (REGISTERS_BASE + 0x0430)
#define HOST_MASK_L (REGISTERS_BASE + 0x0430)
#define HOST_MASK_H (REGISTERS_BASE + 0x0434)
#define HOST_MASK_SET (REGISTERS_BASE + 0x0438)
#define HOST_MASK_SET_L (REGISTERS_BASE + 0x0438)
#define HOST_MASK_SET_H (REGISTERS_BASE + 0x043C)
#define HOST_MASK_CLR (REGISTERS_BASE + 0x0440)
#define HOST_MASK_CLR_L (REGISTERS_BASE + 0x0440)
#define HOST_MASK_CLR_H (REGISTERS_BASE + 0x0444)
/* Host Interrupts*/
#define HINT_MASK (REGISTERS_BASE + 0x0494)
#define HINT_MASK_SET (REGISTERS_BASE + 0x0498)
#define HINT_MASK_CLR (REGISTERS_BASE + 0x049C)
#define HINT_STS_ND_MASKED (REGISTERS_BASE + 0x04A0)
/*1150 spec calls this HINT_STS_RAW*/
#define HINT_STS_ND (REGISTERS_BASE + 0x04B0)
#define HINT_STS_CLR (REGISTERS_BASE + 0x04A4)
#define HINT_ACK (REGISTERS_BASE + 0x04A8)
#define HINT_TRIG (REGISTERS_BASE + 0x04AC)
/* Device Configuration registers*/ /* Device Configuration registers*/
#define SOR_CFG (REGISTERS_BASE + 0x0800) #define SOR_CFG (REGISTERS_BASE + 0x0800)
#define ECPU_CTRL (REGISTERS_BASE + 0x0804) #define ECPU_CTRL (REGISTERS_BASE + 0x0804)
...@@ -419,16 +355,6 @@ enum wl12xx_acx_int_reg { ...@@ -419,16 +355,6 @@ enum wl12xx_acx_int_reg {
| CFG_RX_PRSP_EN) | CFG_RX_PRSP_EN)
/*===============================================
Phy regs
===============================================*/
#define ACX_PHY_ADDR_REG SBB_ADDR
#define ACX_PHY_DATA_REG SBB_DATA
#define ACX_PHY_CTRL_REG SBB_CTL
#define ACX_PHY_REG_WR_MASK 0x00000001ul
#define ACX_PHY_REG_RD_MASK 0x00000002ul
/*=============================================== /*===============================================
EEPROM Read/Write Request 32bit RW EEPROM Read/Write Request 32bit RW
------------------------------------------ ------------------------------------------
...@@ -498,28 +424,6 @@ enum wl12xx_acx_int_reg { ...@@ -498,28 +424,6 @@ enum wl12xx_acx_int_reg {
#define ACX_CONT_WIND_MIN_MASK 0x0000007f #define ACX_CONT_WIND_MIN_MASK 0x0000007f
#define ACX_CONT_WIND_MAX 0x03ff0000 #define ACX_CONT_WIND_MAX 0x03ff0000
/*
* Indirect slave register/memory registers
* ----------------------------------------
*/
#define HW_SLAVE_REG_ADDR_REG 0x00000004
#define HW_SLAVE_REG_DATA_REG 0x00000008
#define HW_SLAVE_REG_CTRL_REG 0x0000000c
#define SLAVE_AUTO_INC 0x00010000
#define SLAVE_NO_AUTO_INC 0x00000000
#define SLAVE_HOST_LITTLE_ENDIAN 0x00000000
#define HW_SLAVE_MEM_ADDR_REG SLV_MEM_ADDR
#define HW_SLAVE_MEM_DATA_REG SLV_MEM_DATA
#define HW_SLAVE_MEM_CTRL_REG SLV_MEM_CTL
#define HW_SLAVE_MEM_ENDIAN_REG SLV_END_CTL
#define HW_FUNC_EVENT_INT_EN 0x8000
#define HW_FUNC_EVENT_MASK_REG 0x00000034
#define ACX_MAC_TIMESTAMP_REG (MAC_TIMESTAMP)
/*=============================================== /*===============================================
HI_CFG Interface Configuration Register Values HI_CFG Interface Configuration Register Values
------------------------------------------ ------------------------------------------
...@@ -678,10 +582,6 @@ b12-b0 - Supported Rate indicator bits as defined below. ...@@ -678,10 +582,6 @@ b12-b0 - Supported Rate indicator bits as defined below.
******************************************************************************/ ******************************************************************************/
#define TNETW1251_CHIP_ID_PG1_0 0x07010101
#define TNETW1251_CHIP_ID_PG1_1 0x07020101
#define TNETW1251_CHIP_ID_PG1_2 0x07030101
/************************************************************************* /*************************************************************************
Interrupt Trigger Register (Host -> WiLink) Interrupt Trigger Register (Host -> WiLink)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册