scsi: lpfc: Correct loss of fc4 type on remote port address change

[ Upstream commit d83ca3ea833d7a66d49225e4191c4e37cab8f079 ]

An address change for a remote port cause PRLI for the wrong protocol
to be sent.  The node copy done in the discovery code skipped copying
the fc4 protocols supported as well.

Fix the copy logic for the address change.  Beefed up log messages in
this area as well.
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

drivers/scsi/lpfc/lpfc_els.c

@@ -1556,8 +1556,10 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp,
 	 */
 	new_ndlp = lpfc_findnode_wwpn(vport, &sp->portName);
 
+	/* return immediately if the WWPN matches ndlp */
 	if (new_ndlp == ndlp && NLP_CHK_NODE_ACT(new_ndlp))
 		return ndlp;
+
 	if (phba->sli_rev == LPFC_SLI_REV4) {
 		active_rrqs_xri_bitmap = mempool_alloc(phba->active_rrq_pool,
 						       GFP_KERNEL);
@@ -1566,9 +1568,13 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp,
 			       phba->cfg_rrq_xri_bitmap_sz);
 	}
 
-	lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
-		 "3178 PLOGI confirm: ndlp %p x%x: new_ndlp %p\n",
-		 ndlp, ndlp->nlp_DID, new_ndlp);
+	lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS | LOG_NODE,
+			 "3178 PLOGI confirm: ndlp x%x x%x x%x: "
+			 "new_ndlp x%x x%x x%x\n",
+			 ndlp->nlp_DID, ndlp->nlp_flag,  ndlp->nlp_fc4_type,
+			 (new_ndlp ? new_ndlp->nlp_DID : 0),
+			 (new_ndlp ? new_ndlp->nlp_flag : 0),
+			 (new_ndlp ? new_ndlp->nlp_fc4_type : 0));
 
 	if (!new_ndlp) {
 		rc = memcmp(&ndlp->nlp_portname, name,
@@ -1617,6 +1623,14 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp,
 			       phba->cfg_rrq_xri_bitmap_sz);
 	}
 
+	/* At this point in this routine, we know new_ndlp will be
+	 * returned. however, any previous GID_FTs that were done
+	 * would have updated nlp_fc4_type in ndlp, so we must ensure
+	 * new_ndlp has the right value.
+	 */
+	if (vport->fc_flag & FC_FABRIC)
+		new_ndlp->nlp_fc4_type = ndlp->nlp_fc4_type;
+
 	lpfc_unreg_rpi(vport, new_ndlp);
 	new_ndlp->nlp_DID = ndlp->nlp_DID;
 	new_ndlp->nlp_prev_state = ndlp->nlp_prev_state;
@@ -1666,7 +1680,6 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp,
 		if (ndlp->nrport) {
 			ndlp->nrport = NULL;
 			lpfc_nlp_put(ndlp);
-			new_ndlp->nlp_fc4_type = ndlp->nlp_fc4_type;
 		}
 
 		/* We shall actually free the ndlp with both nlp_DID and
@@ -1740,6 +1753,12 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp,
 	    active_rrqs_xri_bitmap)
 		mempool_free(active_rrqs_xri_bitmap,
 			     phba->active_rrq_pool);
+
+	lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS | LOG_NODE,
+			 "3173 PLOGI confirm exit: new_ndlp x%x x%x x%x\n",
+			 new_ndlp->nlp_DID, new_ndlp->nlp_flag,
+			 new_ndlp->nlp_fc4_type);
+
 	return new_ndlp;
 }
 

drivers/scsi/lpfc/lpfc_nportdisc.c

@@ -2868,8 +2868,9 @@ lpfc_disc_state_machine(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	/* DSM in event <evt> on NPort <nlp_DID> in state <cur_state> */
 	lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
 			 "0211 DSM in event x%x on NPort x%x in "
-			 "state %d Data: x%x\n",
-			 evt, ndlp->nlp_DID, cur_state, ndlp->nlp_flag);
+			 "state %d Data: x%x x%x\n",
+			 evt, ndlp->nlp_DID, cur_state,
+			 ndlp->nlp_flag, ndlp->nlp_fc4_type);
 
 	lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_DSM,
 		 "DSM in:          evt:%d ste:%d did:x%x",