提交 5dd2d332 编写于 作者: J Jeff Garzik 提交者: Jeff Garzik

[netdrvr] myri10ge, ixgbe: remove broken select INTEL_IOATDMA

We cannot select INTEL_IOATDMA in Kconfig as soon as MYRI10GE or IXGBE
is enabled since the former is not available on all architectures.

Just use a Kconfig bool {IXGBE,MYRI10GE}_DCA set to =y when DCA
support can actually be built.

[myri10ge portion written and signed-off-by] Brice Goglin <brice@myri.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
上级 8fa0b315
......@@ -2410,7 +2410,6 @@ config IXGBE
tristate "Intel(R) 10GbE PCI Express adapters support"
depends on PCI && INET
select INET_LRO
select INTEL_IOATDMA
---help---
This driver supports Intel(R) 10GbE PCI Express family of
adapters. For more information on how to identify your adapter, go
......@@ -2426,6 +2425,11 @@ config IXGBE
To compile this driver as a module, choose M here. The module
will be called ixgbe.
config IXGBE_DCA
bool
default y
depends on IXGBE && DCA && !(IXGBE=y && DCA=m)
config IXGB
tristate "Intel(R) PRO/10GbE support"
depends on PCI
......@@ -2462,7 +2466,6 @@ config MYRI10GE
select FW_LOADER
select CRC32
select INET_LRO
select INTEL_IOATDMA
---help---
This driver supports Myricom Myri-10G Dual Protocol interface in
Ethernet mode. If the eeprom on your board is not recent enough,
......@@ -2474,6 +2477,11 @@ config MYRI10GE
To compile this driver as a module, choose M here. The module
will be called myri10ge.
config MYRI10GE_DCA
bool
default y
depends on MYRI10GE && DCA && !(MYRI10GE=y && DCA=m)
config NETXEN_NIC
tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC"
depends on PCI
......
......@@ -36,7 +36,7 @@
#include "ixgbe_type.h"
#include "ixgbe_common.h"
#if defined(CONFIG_DCA) || defined(CONFIG_DCA_MODULE)
#ifdef CONFIG_IXGBE_DCA
#include <linux/dca.h>
#endif
......@@ -136,7 +136,7 @@ struct ixgbe_ring {
* offset associated with this ring, which is different
* for DCE and RSS modes */
#if defined(CONFIG_DCA) || defined(CONFIG_DCA_MODULE)
#ifdef CONFIG_IXGBE_DCA
/* cpu for tx queue */
int cpu;
#endif
......
......@@ -80,7 +80,7 @@ static struct pci_device_id ixgbe_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, ixgbe_pci_tbl);
#if defined(CONFIG_DCA) || defined(CONFIG_DCA_MODULE)
#ifdef CONFIG_IXGBE_DCA
static int ixgbe_notify_dca(struct notifier_block *, unsigned long event,
void *p);
static struct notifier_block dca_notifier = {
......@@ -296,7 +296,7 @@ static bool ixgbe_clean_tx_irq(struct ixgbe_adapter *adapter,
return (total_packets ? true : false);
}
#if defined(CONFIG_DCA) || defined(CONFIG_DCA_MODULE)
#ifdef CONFIG_IXGBE_DCA
static void ixgbe_update_rx_dca(struct ixgbe_adapter *adapter,
struct ixgbe_ring *rx_ring)
{
......@@ -383,7 +383,7 @@ static int __ixgbe_notify_dca(struct device *dev, void *data)
return 0;
}
#endif /* CONFIG_DCA or CONFIG_DCA_MODULE */
#endif /* CONFIG_IXGBE_DCA */
/**
* ixgbe_receive_skb - Send a completed packet up the stack
* @adapter: board private structure
......@@ -947,7 +947,7 @@ static irqreturn_t ixgbe_msix_clean_tx(int irq, void *data)
r_idx = find_first_bit(q_vector->txr_idx, adapter->num_tx_queues);
for (i = 0; i < q_vector->txr_count; i++) {
tx_ring = &(adapter->tx_ring[r_idx]);
#if defined(CONFIG_DCA) || defined(CONFIG_DCA_MODULE)
#ifdef CONFIG_IXGBE_DCA
if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
ixgbe_update_tx_dca(adapter, tx_ring);
#endif
......@@ -1022,7 +1022,7 @@ static int ixgbe_clean_rxonly(struct napi_struct *napi, int budget)
r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
rx_ring = &(adapter->rx_ring[r_idx]);
#if defined(CONFIG_DCA) || defined(CONFIG_DCA_MODULE)
#ifdef CONFIG_IXGBE_DCA
if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
ixgbe_update_rx_dca(adapter, rx_ring);
#endif
......@@ -1066,7 +1066,7 @@ static int ixgbe_clean_rxonly_many(struct napi_struct *napi, int budget)
r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
for (i = 0; i < q_vector->rxr_count; i++) {
rx_ring = &(adapter->rx_ring[r_idx]);
#if defined(CONFIG_DCA) || defined(CONFIG_DCA_MODULE)
#ifdef CONFIG_IXGBE_DCA
if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
ixgbe_update_rx_dca(adapter, rx_ring);
#endif
......@@ -2155,7 +2155,7 @@ void ixgbe_down(struct ixgbe_adapter *adapter)
netif_carrier_off(netdev);
#if defined(CONFIG_DCA) || defined(CONFIG_DCA_MODULE)
#ifdef CONFIG_IXGBE_DCA
if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) {
adapter->flags &= ~IXGBE_FLAG_DCA_ENABLED;
dca_remove_requester(&adapter->pdev->dev);
......@@ -2167,7 +2167,7 @@ void ixgbe_down(struct ixgbe_adapter *adapter)
ixgbe_clean_all_tx_rings(adapter);
ixgbe_clean_all_rx_rings(adapter);
#if defined(CONFIG_DCA) || defined(CONFIG_DCA_MODULE)
#ifdef CONFIG_IXGBE_DCA
/* since we reset the hardware DCA settings were cleared */
if (dca_add_requester(&adapter->pdev->dev) == 0) {
adapter->flags |= IXGBE_FLAG_DCA_ENABLED;
......@@ -2193,7 +2193,7 @@ static int ixgbe_poll(struct napi_struct *napi, int budget)
struct ixgbe_adapter *adapter = q_vector->adapter;
int tx_cleaned, work_done = 0;
#if defined(CONFIG_DCA) || defined(CONFIG_DCA_MODULE)
#ifdef CONFIG_IXGBE_DCA
if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) {
ixgbe_update_tx_dca(adapter, adapter->tx_ring);
ixgbe_update_rx_dca(adapter, adapter->rx_ring);
......@@ -3922,7 +3922,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
if (err)
goto err_register;
#if defined(CONFIG_DCA) || defined(CONFIG_DCA_MODULE)
#ifdef CONFIG_IXGBE_DCA
if (dca_add_requester(&pdev->dev) == 0) {
adapter->flags |= IXGBE_FLAG_DCA_ENABLED;
/* always use CB2 mode, difference is masked
......@@ -3972,7 +3972,7 @@ static void __devexit ixgbe_remove(struct pci_dev *pdev)
flush_scheduled_work();
#if defined(CONFIG_DCA) || defined(CONFIG_DCA_MODULE)
#ifdef CONFIG_IXGBE_DCA
if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) {
adapter->flags &= ~IXGBE_FLAG_DCA_ENABLED;
dca_remove_requester(&pdev->dev);
......@@ -4105,10 +4105,10 @@ static int __init ixgbe_init_module(void)
printk(KERN_INFO "%s: %s\n", ixgbe_driver_name, ixgbe_copyright);
#if defined(CONFIG_DCA) || defined(CONFIG_DCA_MODULE)
#ifdef CONFIG_IXGBE_DCA
dca_register_notify(&dca_notifier);
#endif
ret = pci_register_driver(&ixgbe_driver);
return ret;
}
......@@ -4123,13 +4123,13 @@ module_init(ixgbe_init_module);
**/
static void __exit ixgbe_exit_module(void)
{
#if defined(CONFIG_DCA) || defined(CONFIG_DCA_MODULE)
#ifdef CONFIG_IXGBE_DCA
dca_unregister_notify(&dca_notifier);
#endif
pci_unregister_driver(&ixgbe_driver);
}
#if defined(CONFIG_DCA) || defined(CONFIG_DCA_MODULE)
#ifdef CONFIG_IXGBE_DCA
static int ixgbe_notify_dca(struct notifier_block *nb, unsigned long event,
void *p)
{
......@@ -4140,7 +4140,7 @@ static int ixgbe_notify_dca(struct notifier_block *nb, unsigned long event,
return ret_val ? NOTIFY_BAD : NOTIFY_DONE;
}
#endif /* CONFIG_DCA or CONFIG_DCA_MODULE */
#endif /* CONFIG_IXGBE_DCA */
module_exit(ixgbe_exit_module);
......
......@@ -188,7 +188,7 @@ struct myri10ge_slice_state {
dma_addr_t fw_stats_bus;
int watchdog_tx_done;
int watchdog_tx_req;
#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
#ifdef CONFIG_MYRI10GE_DCA
int cached_dca_tag;
int cpu;
__be32 __iomem *dca_tag;
......@@ -220,7 +220,7 @@ struct myri10ge_priv {
int msi_enabled;
int msix_enabled;
struct msix_entry *msix_vectors;
#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
#ifdef CONFIG_MYRI10GE_DCA
int dca_enabled;
#endif
u32 link_state;
......@@ -902,7 +902,7 @@ static int myri10ge_reset(struct myri10ge_priv *mgp)
struct myri10ge_slice_state *ss;
int i, status;
size_t bytes;
#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
#ifdef CONFIG_MYRI10GE_DCA
unsigned long dca_tag_off;
#endif
......@@ -1012,7 +1012,7 @@ static int myri10ge_reset(struct myri10ge_priv *mgp)
}
put_be32(htonl(mgp->intr_coal_delay), mgp->intr_coal_delay_ptr);
#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
#ifdef CONFIG_MYRI10GE_DCA
status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_DCA_OFFSET, &cmd, 0);
dca_tag_off = cmd.data0;
for (i = 0; i < mgp->num_slices; i++) {
......@@ -1051,7 +1051,7 @@ static int myri10ge_reset(struct myri10ge_priv *mgp)
return status;
}
#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
#ifdef CONFIG_MYRI10GE_DCA
static void
myri10ge_write_dca(struct myri10ge_slice_state *ss, int cpu, int tag)
{
......@@ -1505,7 +1505,7 @@ static int myri10ge_poll(struct napi_struct *napi, int budget)
struct net_device *netdev = ss->mgp->dev;
int work_done;
#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
#ifdef CONFIG_MYRI10GE_DCA
if (ss->mgp->dca_enabled)
myri10ge_update_dca(ss);
#endif
......@@ -1736,7 +1736,7 @@ static const char myri10ge_gstrings_main_stats[][ETH_GSTRING_LEN] = {
"tx_boundary", "WC", "irq", "MSI", "MSIX",
"read_dma_bw_MBs", "write_dma_bw_MBs", "read_write_dma_bw_MBs",
"serial_number", "watchdog_resets",
#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
#ifdef CONFIG_MYRI10GE_DCA
"dca_capable_firmware", "dca_device_present",
#endif
"link_changes", "link_up", "dropped_link_overflow",
......@@ -1815,7 +1815,7 @@ myri10ge_get_ethtool_stats(struct net_device *netdev,
data[i++] = (unsigned int)mgp->read_write_dma;
data[i++] = (unsigned int)mgp->serial_number;
data[i++] = (unsigned int)mgp->watchdog_resets;
#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
#ifdef CONFIG_MYRI10GE_DCA
data[i++] = (unsigned int)(mgp->ss[0].dca_tag != NULL);
data[i++] = (unsigned int)(mgp->dca_enabled);
#endif
......@@ -3844,7 +3844,7 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
dev_err(&pdev->dev, "failed reset\n");
goto abort_with_slices;
}
#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
#ifdef CONFIG_MYRI10GE_DCA
myri10ge_setup_dca(mgp);
#endif
pci_set_drvdata(pdev, mgp);
......@@ -3948,7 +3948,7 @@ static void myri10ge_remove(struct pci_dev *pdev)
netdev = mgp->dev;
unregister_netdev(netdev);
#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
#ifdef CONFIG_MYRI10GE_DCA
myri10ge_teardown_dca(mgp);
#endif
myri10ge_dummy_rdma(mgp, 0);
......@@ -3993,7 +3993,7 @@ static struct pci_driver myri10ge_driver = {
#endif
};
#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
#ifdef CONFIG_MYRI10GE_DCA
static int
myri10ge_notify_dca(struct notifier_block *nb, unsigned long event, void *p)
{
......@@ -4024,7 +4024,7 @@ static __init int myri10ge_init_module(void)
myri10ge_driver.name, myri10ge_rss_hash);
myri10ge_rss_hash = MXGEFW_RSS_HASH_TYPE_SRC_PORT;
}
#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
#ifdef CONFIG_MYRI10GE_DCA
dca_register_notify(&myri10ge_dca_notifier);
#endif
if (myri10ge_max_slices > MYRI10GE_MAX_SLICES)
......@@ -4037,7 +4037,7 @@ module_init(myri10ge_init_module);
static __exit void myri10ge_cleanup_module(void)
{
#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
#ifdef CONFIG_MYRI10GE_DCA
dca_unregister_notify(&myri10ge_dca_notifier);
#endif
pci_unregister_driver(&myri10ge_driver);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册