提交 5dbc2f54 编写于 作者: L Linus Torvalds

Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds

* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds:
  leds: Fix race between LED device uevent and actual attributes creation
  leds-gpio: fix default state handling on OF platforms
  leds: Add Dell Business Class Netbook LED driver
  leds: Kconfig cleanup
  leds: led-class.c - Quiet boot messages
  leds: make PCI device id constant
  leds: ALIX2: Add dependency to !GPIO_CS5335
......@@ -15,6 +15,8 @@ config LEDS_CLASS
This option enables the led sysfs class in /sys/class/leds. You'll
need this to do anything useful with LEDs. If unsure, say N.
if LEDS_CLASS
comment "LED drivers"
config LEDS_88PM860X
......@@ -26,73 +28,73 @@ config LEDS_88PM860X
config LEDS_ATMEL_PWM
tristate "LED Support using Atmel PWM outputs"
depends on LEDS_CLASS && ATMEL_PWM
depends on ATMEL_PWM
help
This option enables support for LEDs driven using outputs
of the dedicated PWM controller found on newer Atmel SOCs.
config LEDS_LOCOMO
tristate "LED Support for Locomo device"
depends on LEDS_CLASS && SHARP_LOCOMO
depends on SHARP_LOCOMO
help
This option enables support for the LEDs on Sharp Locomo.
Zaurus models SL-5500 and SL-5600.
config LEDS_MIKROTIK_RB532
tristate "LED Support for Mikrotik Routerboard 532"
depends on LEDS_CLASS && MIKROTIK_RB532
depends on MIKROTIK_RB532
help
This option enables support for the so called "User LED" of
Mikrotik's Routerboard 532.
config LEDS_S3C24XX
tristate "LED Support for Samsung S3C24XX GPIO LEDs"
depends on LEDS_CLASS && ARCH_S3C2410
depends on ARCH_S3C2410
help
This option enables support for LEDs connected to GPIO lines
on Samsung S3C24XX series CPUs, such as the S3C2410 and S3C2440.
config LEDS_AMS_DELTA
tristate "LED Support for the Amstrad Delta (E3)"
depends on LEDS_CLASS && MACH_AMS_DELTA
depends on MACH_AMS_DELTA
help
This option enables support for the LEDs on Amstrad Delta (E3).
config LEDS_NET48XX
tristate "LED Support for Soekris net48xx series Error LED"
depends on LEDS_CLASS && SCx200_GPIO
depends on SCx200_GPIO
help
This option enables support for the Soekris net4801 and net4826 error
LED.
config LEDS_FSG
tristate "LED Support for the Freecom FSG-3"
depends on LEDS_CLASS && MACH_FSG
depends on MACH_FSG
help
This option enables support for the LEDs on the Freecom FSG-3.
config LEDS_WRAP
tristate "LED Support for the WRAP series LEDs"
depends on LEDS_CLASS && SCx200_GPIO
depends on SCx200_GPIO
help
This option enables support for the PCEngines WRAP programmable LEDs.
config LEDS_ALIX2
tristate "LED Support for ALIX.2 and ALIX.3 series"
depends on LEDS_CLASS && X86 && EXPERIMENTAL
depends on X86 && !GPIO_CS5535 && !CS5535_GPIO
help
This option enables support for the PCEngines ALIX.2 and ALIX.3 LEDs.
You have to set leds-alix2.force=1 for boards with Award BIOS.
config LEDS_H1940
tristate "LED Support for iPAQ H1940 device"
depends on LEDS_CLASS && ARCH_H1940
depends on ARCH_H1940
help
This option enables support for the LEDs on the h1940.
config LEDS_COBALT_QUBE
tristate "LED Support for the Cobalt Qube series front LED"
depends on LEDS_CLASS && MIPS_COBALT
depends on MIPS_COBALT
help
This option enables support for the front LED on Cobalt Qube series
......@@ -105,7 +107,7 @@ config LEDS_COBALT_RAQ
config LEDS_SUNFIRE
tristate "LED support for SunFire servers."
depends on LEDS_CLASS && SPARC64
depends on SPARC64
select LEDS_TRIGGERS
help
This option enables support for the Left, Middle, and Right
......@@ -113,14 +115,14 @@ config LEDS_SUNFIRE
config LEDS_HP6XX
tristate "LED Support for the HP Jornada 6xx"
depends on LEDS_CLASS && SH_HP6XX
depends on SH_HP6XX
help
This option enables LED support for the handheld
HP Jornada 620/660/680/690.
config LEDS_PCA9532
tristate "LED driver for PCA9532 dimmer"
depends on LEDS_CLASS && I2C && INPUT && EXPERIMENTAL
depends on I2C && INPUT && EXPERIMENTAL
help
This option enables support for NXP pca9532
LED controller. It is generally only useful
......@@ -128,7 +130,7 @@ config LEDS_PCA9532
config LEDS_GPIO
tristate "LED Support for GPIO connected LEDs"
depends on LEDS_CLASS && GENERIC_GPIO
depends on GENERIC_GPIO
help
This option enables support for the LEDs connected to GPIO
outputs. To be useful the particular board must have LEDs
......@@ -155,7 +157,7 @@ config LEDS_GPIO_OF
config LEDS_LP3944
tristate "LED Support for N.S. LP3944 (Fun Light) I2C chip"
depends on LEDS_CLASS && I2C
depends on I2C
help
This option enables support for LEDs connected to the National
Semiconductor LP3944 Lighting Management Unit (LMU) also known as
......@@ -166,7 +168,7 @@ config LEDS_LP3944
config LEDS_CLEVO_MAIL
tristate "Mail LED on Clevo notebook"
depends on LEDS_CLASS && X86 && SERIO_I8042 && DMI
depends on X86 && SERIO_I8042 && DMI
help
This driver makes the mail LED accessible from userspace
programs through the leds subsystem. This LED have three
......@@ -196,7 +198,7 @@ config LEDS_CLEVO_MAIL
config LEDS_PCA955X
tristate "LED Support for PCA955x I2C chips"
depends on LEDS_CLASS && I2C
depends on I2C
help
This option enables support for LEDs connected to PCA955x
LED driver chips accessed via the I2C bus. Supported
......@@ -204,54 +206,54 @@ config LEDS_PCA955X
config LEDS_WM831X_STATUS
tristate "LED support for status LEDs on WM831x PMICs"
depends on LEDS_CLASS && MFD_WM831X
depends on MFD_WM831X
help
This option enables support for the status LEDs of the WM831x
series of PMICs.
config LEDS_WM8350
tristate "LED Support for WM8350 AudioPlus PMIC"
depends on LEDS_CLASS && MFD_WM8350
depends on MFD_WM8350
help
This option enables support for LEDs driven by the Wolfson
Microelectronics WM8350 AudioPlus PMIC.
config LEDS_DA903X
tristate "LED Support for DA9030/DA9034 PMIC"
depends on LEDS_CLASS && PMIC_DA903X
depends on PMIC_DA903X
help
This option enables support for on-chip LED drivers found
on Dialog Semiconductor DA9030/DA9034 PMICs.
config LEDS_DAC124S085
tristate "LED Support for DAC124S085 SPI DAC"
depends on LEDS_CLASS && SPI
depends on SPI
help
This option enables support for DAC124S085 SPI DAC from NatSemi,
which can be used to control up to four LEDs.
config LEDS_PWM
tristate "PWM driven LED Support"
depends on LEDS_CLASS && HAVE_PWM
depends on HAVE_PWM
help
This option enables support for pwm driven LEDs
config LEDS_REGULATOR
tristate "REGULATOR driven LED support"
depends on LEDS_CLASS && REGULATOR
depends on REGULATOR
help
This option enables support for regulator driven LEDs.
config LEDS_BD2802
tristate "LED driver for BD2802 RGB LED"
depends on LEDS_CLASS && I2C
depends on I2C
help
This option enables support for BD2802GU RGB LED driver chips
accessed via the I2C bus.
config LEDS_INTEL_SS4200
tristate "LED driver for Intel NAS SS4200 series"
depends on LEDS_CLASS && PCI && DMI
depends on PCI && DMI
help
This option enables support for the Intel SS4200 series of
Network Attached Storage servers. You may control the hard
......@@ -260,7 +262,7 @@ config LEDS_INTEL_SS4200
config LEDS_LT3593
tristate "LED driver for LT3593 controllers"
depends on LEDS_CLASS && GENERIC_GPIO
depends on GENERIC_GPIO
help
This option enables support for LEDs driven by a Linear Technology
LT3593 controller. This controller uses a special one-wire pulse
......@@ -268,7 +270,7 @@ config LEDS_LT3593
config LEDS_ADP5520
tristate "LED Support for ADP5520/ADP5501 PMIC"
depends on LEDS_CLASS && PMIC_ADP5520
depends on PMIC_ADP5520
help
This option enables support for on-chip LED drivers found
on Analog Devices ADP5520/ADP5501 PMICs.
......@@ -276,7 +278,12 @@ config LEDS_ADP5520
To compile this driver as a module, choose M here: the module will
be called leds-adp5520.
comment "LED Triggers"
config LEDS_DELL_NETBOOKS
tristate "External LED on Dell Business Netbooks"
depends on X86 && ACPI_WMI
help
This adds support for the Latitude 2100 and similar
notebooks that have an external LED.
config LEDS_TRIGGERS
bool "LED Trigger support"
......@@ -285,9 +292,12 @@ config LEDS_TRIGGERS
These triggers allow kernel events to drive the LEDs and can
be configured via sysfs. If unsure, say Y.
if LEDS_TRIGGERS
comment "LED Triggers"
config LEDS_TRIGGER_TIMER
tristate "LED Timer Trigger"
depends on LEDS_TRIGGERS
help
This allows LEDs to be controlled by a programmable timer
via sysfs. Some LED hardware can be programmed to start
......@@ -298,14 +308,13 @@ config LEDS_TRIGGER_TIMER
config LEDS_TRIGGER_IDE_DISK
bool "LED IDE Disk Trigger"
depends on LEDS_TRIGGERS && IDE_GD_ATA
depends on IDE_GD_ATA
help
This allows LEDs to be controlled by IDE disk activity.
If unsure, say Y.
config LEDS_TRIGGER_HEARTBEAT
tristate "LED Heartbeat Trigger"
depends on LEDS_TRIGGERS
help
This allows LEDs to be controlled by a CPU load average.
The flash frequency is a hyperbolic function of the 1-minute
......@@ -314,7 +323,6 @@ config LEDS_TRIGGER_HEARTBEAT
config LEDS_TRIGGER_BACKLIGHT
tristate "LED backlight Trigger"
depends on LEDS_TRIGGERS
help
This allows LEDs to be controlled as a backlight device: they
turn off and on when the display is blanked and unblanked.
......@@ -323,7 +331,6 @@ config LEDS_TRIGGER_BACKLIGHT
config LEDS_TRIGGER_GPIO
tristate "LED GPIO Trigger"
depends on LEDS_TRIGGERS
depends on GPIOLIB
help
This allows LEDs to be controlled by gpio events. It's good
......@@ -336,7 +343,6 @@ config LEDS_TRIGGER_GPIO
config LEDS_TRIGGER_DEFAULT_ON
tristate "LED Default ON Trigger"
depends on LEDS_TRIGGERS
help
This allows LEDs to be initialised in the ON state.
If unsure, say Y.
......@@ -344,4 +350,8 @@ config LEDS_TRIGGER_DEFAULT_ON
comment "iptables trigger is under Netfilter config (LED target)"
depends on LEDS_TRIGGERS
endif # LEDS_TRIGGERS
endif # LEDS_CLASS
endif # NEW_LEDS
......@@ -34,6 +34,7 @@ obj-$(CONFIG_LEDS_REGULATOR) += leds-regulator.o
obj-$(CONFIG_LEDS_INTEL_SS4200) += leds-ss4200.o
obj-$(CONFIG_LEDS_LT3593) += leds-lt3593.o
obj-$(CONFIG_LEDS_ADP5520) += leds-adp5520.o
obj-$(CONFIG_LEDS_DELL_NETBOOKS) += dell-led.o
# LED SPI Drivers
obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o
......
/*
* dell_led.c - Dell LED Driver
*
* Copyright (C) 2010 Dell Inc.
* Louis Davis <louis_davis@dell.com>
* Jim Dailey <jim_dailey@dell.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as
* published by the Free Software Foundation.
*
*/
#include <linux/acpi.h>
#include <linux/leds.h>
MODULE_AUTHOR("Louis Davis/Jim Dailey");
MODULE_DESCRIPTION("Dell LED Control Driver");
MODULE_LICENSE("GPL");
#define DELL_LED_BIOS_GUID "F6E4FE6E-909D-47cb-8BAB-C9F6F2F8D396"
MODULE_ALIAS("wmi:" DELL_LED_BIOS_GUID);
/* Error Result Codes: */
#define INVALID_DEVICE_ID 250
#define INVALID_PARAMETER 251
#define INVALID_BUFFER 252
#define INTERFACE_ERROR 253
#define UNSUPPORTED_COMMAND 254
#define UNSPECIFIED_ERROR 255
/* Device ID */
#define DEVICE_ID_PANEL_BACK 1
/* LED Commands */
#define CMD_LED_ON 16
#define CMD_LED_OFF 17
#define CMD_LED_BLINK 18
struct bios_args {
unsigned char length;
unsigned char result_code;
unsigned char device_id;
unsigned char command;
unsigned char on_time;
unsigned char off_time;
};
static int dell_led_perform_fn(u8 length,
u8 result_code,
u8 device_id,
u8 command,
u8 on_time,
u8 off_time)
{
struct bios_args *bios_return;
u8 return_code;
union acpi_object *obj;
struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
struct acpi_buffer input;
acpi_status status;
struct bios_args args;
args.length = length;
args.result_code = result_code;
args.device_id = device_id;
args.command = command;
args.on_time = on_time;
args.off_time = off_time;
input.length = sizeof(struct bios_args);
input.pointer = &args;
status = wmi_evaluate_method(DELL_LED_BIOS_GUID,
1,
1,
&input,
&output);
if (ACPI_FAILURE(status))
return status;
obj = output.pointer;
if (!obj)
return -EINVAL;
else if (obj->type != ACPI_TYPE_BUFFER) {
kfree(obj);
return -EINVAL;
}
bios_return = ((struct bios_args *)obj->buffer.pointer);
return_code = bios_return->result_code;
kfree(obj);
return return_code;
}
static int led_on(void)
{
return dell_led_perform_fn(3, /* Length of command */
INTERFACE_ERROR, /* Init to INTERFACE_ERROR */
DEVICE_ID_PANEL_BACK, /* Device ID */
CMD_LED_ON, /* Command */
0, /* not used */
0); /* not used */
}
static int led_off(void)
{
return dell_led_perform_fn(3, /* Length of command */
INTERFACE_ERROR, /* Init to INTERFACE_ERROR */
DEVICE_ID_PANEL_BACK, /* Device ID */
CMD_LED_OFF, /* Command */
0, /* not used */
0); /* not used */
}
static int led_blink(unsigned char on_eighths,
unsigned char off_eighths)
{
return dell_led_perform_fn(5, /* Length of command */
INTERFACE_ERROR, /* Init to INTERFACE_ERROR */
DEVICE_ID_PANEL_BACK, /* Device ID */
CMD_LED_BLINK, /* Command */
on_eighths, /* blink on in eigths of a second */
off_eighths); /* blink off in eights of a second */
}
static void dell_led_set(struct led_classdev *led_cdev,
enum led_brightness value)
{
if (value == LED_OFF)
led_off();
else
led_on();
}
static int dell_led_blink(struct led_classdev *led_cdev,
unsigned long *delay_on,
unsigned long *delay_off)
{
unsigned long on_eighths;
unsigned long off_eighths;
/* The Dell LED delay is based on 125ms intervals.
Need to round up to next interval. */
on_eighths = (*delay_on + 124) / 125;
if (0 == on_eighths)
on_eighths = 1;
if (on_eighths > 255)
on_eighths = 255;
*delay_on = on_eighths * 125;
off_eighths = (*delay_off + 124) / 125;
if (0 == off_eighths)
off_eighths = 1;
if (off_eighths > 255)
off_eighths = 255;
*delay_off = off_eighths * 125;
led_blink(on_eighths, off_eighths);
return 0;
}
static struct led_classdev dell_led = {
.name = "dell::lid",
.brightness = LED_OFF,
.max_brightness = 1,
.brightness_set = dell_led_set,
.blink_set = dell_led_blink,
.flags = LED_CORE_SUSPENDRESUME,
};
static int __init dell_led_init(void)
{
int error = 0;
if (!wmi_has_guid(DELL_LED_BIOS_GUID))
return -ENODEV;
error = led_off();
if (error != 0)
return -ENODEV;
return led_classdev_register(NULL, &dell_led);
}
static void __exit dell_led_exit(void)
{
led_classdev_unregister(&dell_led);
led_off();
}
module_init(dell_led_init);
module_exit(dell_led_exit);
......@@ -72,11 +72,14 @@ static ssize_t led_max_brightness_show(struct device *dev,
return sprintf(buf, "%u\n", led_cdev->max_brightness);
}
static DEVICE_ATTR(brightness, 0644, led_brightness_show, led_brightness_store);
static DEVICE_ATTR(max_brightness, 0444, led_max_brightness_show, NULL);
static struct device_attribute led_class_attrs[] = {
__ATTR(brightness, 0644, led_brightness_show, led_brightness_store),
__ATTR(max_brightness, 0644, led_max_brightness_show, NULL),
#ifdef CONFIG_LEDS_TRIGGERS
static DEVICE_ATTR(trigger, 0644, led_trigger_show, led_trigger_store);
__ATTR(trigger, 0644, led_trigger_show, led_trigger_store),
#endif
__ATTR_NULL,
};
/**
* led_classdev_suspend - suspend an led_classdev.
......@@ -127,18 +130,11 @@ static int led_resume(struct device *dev)
*/
int led_classdev_register(struct device *parent, struct led_classdev *led_cdev)
{
int rc;
led_cdev->dev = device_create(leds_class, parent, 0, led_cdev,
"%s", led_cdev->name);
if (IS_ERR(led_cdev->dev))
return PTR_ERR(led_cdev->dev);
/* register the attributes */
rc = device_create_file(led_cdev->dev, &dev_attr_brightness);
if (rc)
goto err_out;
#ifdef CONFIG_LEDS_TRIGGERS
init_rwsem(&led_cdev->trigger_lock);
#endif
......@@ -150,36 +146,18 @@ int led_classdev_register(struct device *parent, struct led_classdev *led_cdev)
if (!led_cdev->max_brightness)
led_cdev->max_brightness = LED_FULL;
rc = device_create_file(led_cdev->dev, &dev_attr_max_brightness);
if (rc)
goto err_out_attr_max;
led_update_brightness(led_cdev);
#ifdef CONFIG_LEDS_TRIGGERS
rc = device_create_file(led_cdev->dev, &dev_attr_trigger);
if (rc)
goto err_out_led_list;
led_trigger_set_default(led_cdev);
#endif
printk(KERN_INFO "Registered led device: %s\n",
printk(KERN_DEBUG "Registered led device: %s\n",
led_cdev->name);
return 0;
#ifdef CONFIG_LEDS_TRIGGERS
err_out_led_list:
device_remove_file(led_cdev->dev, &dev_attr_max_brightness);
#endif
err_out_attr_max:
device_remove_file(led_cdev->dev, &dev_attr_brightness);
list_del(&led_cdev->node);
err_out:
device_unregister(led_cdev->dev);
return rc;
}
EXPORT_SYMBOL_GPL(led_classdev_register);
/**
......@@ -190,10 +168,7 @@ EXPORT_SYMBOL_GPL(led_classdev_register);
*/
void led_classdev_unregister(struct led_classdev *led_cdev)
{
device_remove_file(led_cdev->dev, &dev_attr_max_brightness);
device_remove_file(led_cdev->dev, &dev_attr_brightness);
#ifdef CONFIG_LEDS_TRIGGERS
device_remove_file(led_cdev->dev, &dev_attr_trigger);
down_write(&led_cdev->trigger_lock);
if (led_cdev->trigger)
led_trigger_set(led_cdev, NULL);
......@@ -215,6 +190,7 @@ static int __init leds_init(void)
return PTR_ERR(leds_class);
leds_class->suspend = led_suspend;
leds_class->resume = led_resume;
leds_class->dev_attrs = led_class_attrs;
return 0;
}
......
......@@ -211,7 +211,6 @@ static int __devinit of_gpio_leds_probe(struct of_device *ofdev,
const struct of_device_id *match)
{
struct device_node *np = ofdev->node, *child;
struct gpio_led led;
struct gpio_led_of_platform_data *pdata;
int count = 0, ret;
......@@ -226,8 +225,8 @@ static int __devinit of_gpio_leds_probe(struct of_device *ofdev,
if (!pdata)
return -ENOMEM;
memset(&led, 0, sizeof(led));
for_each_child_of_node(np, child) {
struct gpio_led led = {};
enum of_gpio_flags flags;
const char *state;
......
......@@ -63,7 +63,7 @@ MODULE_LICENSE("GPL");
/*
* PCI ID of the Intel ICH7 LPC Device within which the GPIO block lives.
*/
static struct pci_device_id ich7_lpc_pci_id[] =
static const struct pci_device_id ich7_lpc_pci_id[] =
{
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1) },
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册