Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
大约 1 年 前同步成功

通知 158
Star 36
Fork 7
cloud-kernel
cloud-kernel

体验新版 GitCode，发现更多精彩内容 >>

提交 5db51b50 编写于 作者: G Greg Kroah-Hartman
浏览文件
操作

USB: serial: metro-usb: move to use dev_dbg() instead of dbg() 

This properly ties the driver into the dynamic debug system and provides
the needed device identification when the messages are printed out.

It also removes a ton of checkpatch warnings as well, which is always a
nice validation that it's the correct thing to do.

Cc: Aleksey Babahin <tamerlan311@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
上级 8111e4ec
隐藏空白更改
内联 并排
Showing with 44 addition and 34 deletion
drivers/usb/serial/metro-usb.c
浏览文件 @ 5db51b50
......@@ -66,7 +66,7 @@ static void metrousb_read_int_callback(struct urb *urb)
int result = 0;
unsigned long flags = 0;
dbg("METRO-USB - %s - port number=%d", __FUNCTION__, port->number);
dev_dbg(&port->dev, "%s\n", __func__);
switch (urb->status) {
case 0:
......@@ -76,12 +76,14 @@ static void metrousb_read_int_callback(struct urb *urb)
case -ENOENT:
case -ESHUTDOWN:
/* urb has been terminated. */
dbg("METRO-USB - %s - urb shutting down, port number=%d, error code=%d",
__FUNCTION__, port->number, result);
dev_dbg(&port->dev,
"%s - urb shutting down, error code=%d\n",
__func__, result);
return;
default:
dbg("METRO-USB - %s - non-zero urb received, port number=%d, error code=%d",
__FUNCTION__, port->number, result);
dev_dbg(&port->dev,
"%s - non-zero urb received, error code=%d\n",
__func__, result);
goto exit;
}
......@@ -89,7 +91,8 @@ static void metrousb_read_int_callback(struct urb *urb)
/* Set the data read from the usb port into the serial port buffer. */
tty = tty_port_tty_get(&port->port);
if (!tty) {
dbg("%s - bad tty pointer - exiting", __func__);
dev_dbg(&port->dev, "%s - bad tty pointer - exiting\n",
__func__);
return;
}
......@@ -117,25 +120,25 @@ static void metrousb_read_int_callback(struct urb *urb)
result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
if (result) {
dbg("METRO-USB - %s - failed submitting interrupt in urb for port number=%d, error code=%d",
__FUNCTION__, port->number, result);
}
if (result)
dev_dbg(&port->dev,
"%s - failed submitting interrupt in urb, error code=%d\n",
__func__, result);
}
return;
exit:
/* Try to resubmit the urb. */
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result) {
dbg("METRO-USB - %s - failed submitting interrupt in urb for port number=%d, error code=%d",
__FUNCTION__, port->number, result);
}
if (result)
dev_dbg(&port->dev,
"%s - failed submitting interrupt in urb, error code=%d\n",
__func__, result);
}
static void metrousb_cleanup(struct usb_serial_port *port)
{
dbg("METRO-USB - %s - port number=%d", __FUNCTION__, port->number);
dev_dbg(&port->dev, "%s\n", __func__);
if (port->serial->dev) {
/* Shutdown any interrupt in urbs. */
......@@ -153,11 +156,12 @@ static int metrousb_open(struct tty_struct *tty, struct usb_serial_port *port)
unsigned long flags = 0;
int result = 0;
dbg("METRO-USB - %s - port number=%d", __FUNCTION__, port->number);
dev_dbg(&port->dev, "%s\n", __func__);
/* Make sure the urb is initialized. */
if (!port->interrupt_in_urb) {
dbg("METRO-USB - %s - interrupt urb not initialized for port number=%d", __FUNCTION__, port->number);
dev_dbg(&port->dev, "%s - interrupt urb not initialized\n",
__func__);
return -ENODEV;
}
......@@ -187,12 +191,13 @@ static int metrousb_open(struct tty_struct *tty, struct usb_serial_port *port)
result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (result) {
dbg("METRO-USB - %s - failed submitting interrupt in urb for port number=%d, error code=%d"
, __FUNCTION__, port->number, result);
dev_dbg(&port->dev,
"%s - failed submitting interrupt in urb, error code=%d\n",
__func__, result);
goto exit;
}
dbg("METRO-USB - %s - port open for port number=%d", __FUNCTION__, port->number);
dev_dbg(&port->dev, "%s - port open\n", __func__);
exit:
return result;
}
......@@ -202,7 +207,8 @@ static int metrousb_set_modem_ctrl(struct usb_serial *serial, unsigned int contr
int retval = 0;
unsigned char mcr = METROUSB_MCR_NONE;
dbg("METRO-USB - %s - control state=%d", __FUNCTION__, control_state);
dev_dbg(&serial->dev->dev, "%s - control state = %d\n",
__func__, control_state);
/* Set the modem control value. */
if (control_state & TIOCM_DTR)
......@@ -215,7 +221,9 @@ static int metrousb_set_modem_ctrl(struct usb_serial *serial, unsigned int contr
METROUSB_SET_REQUEST_TYPE, METROUSB_SET_MODEM_CTRL_REQUEST,
control_state, 0, NULL, 0, WDR_TIMEOUT);
if (retval < 0)
dbg("METRO-USB - %s - set modem ctrl=0x%x failed, error code=%d", __FUNCTION__, mcr, retval);
dev_dbg(&serial->dev->dev,
"%s - set modem ctrl=0x%x failed, error code=%d\n",
__func__, mcr, retval);
return retval;
}
......@@ -224,7 +232,7 @@ static void metrousb_shutdown(struct usb_serial *serial)
{
int i = 0;
dbg("METRO-USB - %s", __FUNCTION__);
dev_dbg(&serial->dev->dev, "%s\n", __func__);
/* Stop reading and writing on all ports. */
for (i = 0; i < serial->num_ports; ++i) {
......@@ -235,7 +243,8 @@ static void metrousb_shutdown(struct usb_serial *serial)
kfree(usb_get_serial_port_data(serial->port[i]));
usb_set_serial_port_data(serial->port[i], NULL);
dbg("METRO-USB - %s - freed port number=%d", __FUNCTION__, serial->port[i]->number);
dev_dbg(&serial->dev->dev, "%s - freed port number=%d\n",
__func__, serial->port[i]->number);
}
}
......@@ -245,7 +254,7 @@ static int metrousb_startup(struct usb_serial *serial)
struct usb_serial_port *port;
int i = 0;
dbg("METRO-USB - %s", __FUNCTION__);
dev_dbg(&serial->dev->dev, "%s\n", __func__);
/* Loop through the serial ports setting up the private structures.
* Currently we only use one port. */
......@@ -261,7 +270,8 @@ static int metrousb_startup(struct usb_serial *serial)
spin_lock_init(&metro_priv->lock);
usb_set_serial_port_data(port, metro_priv);
dbg("METRO-USB - %s - port number=%d.", __FUNCTION__, port->number);
dev_dbg(&serial->dev->dev, "%s - port number=%d\n ",
__func__, port->number);
}
return 0;
......@@ -273,7 +283,7 @@ static void metrousb_throttle(struct tty_struct *tty)
struct metrousb_private *metro_priv = usb_get_serial_port_data(port);
unsigned long flags = 0;
dbg("METRO-USB - %s - port number=%d", __FUNCTION__, port->number);
dev_dbg(tty->dev, "%s\n", __func__);
/* Set the private information for the port to stop reading data. */
spin_lock_irqsave(&metro_priv->lock, flags);
......@@ -288,7 +298,7 @@ static int metrousb_tiocmget(struct tty_struct *tty)
struct metrousb_private *metro_priv = usb_get_serial_port_data(port);
unsigned long flags = 0;
dbg("METRO-USB - %s - port number=%d", __FUNCTION__, port->number);
dev_dbg(tty->dev, "%s\n", __func__);
spin_lock_irqsave(&metro_priv->lock, flags);
control_state = metro_priv->control_state;
......@@ -306,7 +316,7 @@ static int metrousb_tiocmset(struct tty_struct *tty,
unsigned long flags = 0;
unsigned long control_state = 0;
dbg("METRO-USB - %s - port number=%d, set=%d, clear=%d", __FUNCTION__, port->number, set, clear);
dev_dbg(tty->dev, "%s - set=%d, clear=%d\n", __func__, set, clear);
spin_lock_irqsave(&metro_priv->lock, flags);
control_state = metro_priv->control_state;
......@@ -333,7 +343,7 @@ static void metrousb_unthrottle(struct tty_struct *tty)
unsigned long flags = 0;
int result = 0;
dbg("METRO-USB - %s - port number=%d", __FUNCTION__, port->number);
dev_dbg(tty->dev, "%s\n", __func__);
/* Set the private information for the port to resume reading data. */
spin_lock_irqsave(&metro_priv->lock, flags);
......@@ -343,10 +353,10 @@ static void metrousb_unthrottle(struct tty_struct *tty)
/* Submit the urb to read from the port. */
port->interrupt_in_urb->dev = port->serial->dev;
result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
if (result) {
dbg("METRO-USB - %s - failed submitting interrupt in urb for port number=%d, error code=%d",
__FUNCTION__, port->number, result);
}
if (result)
dev_dbg(tty->dev,
"failed submitting interrupt in urb error code=%d\n",
result);
}
static struct usb_driver metrousb_driver = {
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或