提交 5cbf777c 编写于 作者: X Xin Long 提交者: David S. Miller

route: add support for directed broadcast forwarding

This patch implements the feature described in rfc1812#section-5.3.5.2
and rfc2644. It allows the router to forward directed broadcast when
sysctl bc_forwarding is enabled.

Note that this feature could be done by iptables -j TEE, but it would
cause some problems:
  - target TEE's gateway param has to be set with a specific address,
    and it's not flexible especially when the route wants forward all
    directed broadcasts.
  - this duplicates the directed broadcasts so this may cause side
    effects to applications.

Besides, to keep consistent with other os router like BSD, it's also
necessary to implement it in the route rx path.

Note that route cache needs to be flushed when bc_forwarding is
changed.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 d0c1f011
......@@ -93,6 +93,7 @@ static inline void ipv4_devconf_setall(struct in_device *in_dev)
#define IN_DEV_FORWARD(in_dev) IN_DEV_CONF_GET((in_dev), FORWARDING)
#define IN_DEV_MFORWARD(in_dev) IN_DEV_ANDCONF((in_dev), MC_FORWARDING)
#define IN_DEV_BFORWARD(in_dev) IN_DEV_ANDCONF((in_dev), BC_FORWARDING)
#define IN_DEV_RPFILTER(in_dev) IN_DEV_MAXCONF((in_dev), RP_FILTER)
#define IN_DEV_SRC_VMARK(in_dev) IN_DEV_ORCONF((in_dev), SRC_VMARK)
#define IN_DEV_SOURCE_ROUTE(in_dev) IN_DEV_ANDCONF((in_dev), \
......
......@@ -168,6 +168,7 @@ enum
IPV4_DEVCONF_IGNORE_ROUTES_WITH_LINKDOWN,
IPV4_DEVCONF_DROP_UNICAST_IN_L2_MULTICAST,
IPV4_DEVCONF_DROP_GRATUITOUS_ARP,
IPV4_DEVCONF_BC_FORWARDING,
__IPV4_DEVCONF_MAX
};
......
......@@ -18,6 +18,7 @@ enum {
NETCONFA_PROXY_NEIGH,
NETCONFA_IGNORE_ROUTES_WITH_LINKDOWN,
NETCONFA_INPUT,
NETCONFA_BC_FORWARDING,
__NETCONFA_MAX
};
#define NETCONFA_MAX (__NETCONFA_MAX - 1)
......
......@@ -1827,6 +1827,8 @@ static int inet_netconf_msgsize_devconf(int type)
size += nla_total_size(4);
if (all || type == NETCONFA_MC_FORWARDING)
size += nla_total_size(4);
if (all || type == NETCONFA_BC_FORWARDING)
size += nla_total_size(4);
if (all || type == NETCONFA_PROXY_NEIGH)
size += nla_total_size(4);
if (all || type == NETCONFA_IGNORE_ROUTES_WITH_LINKDOWN)
......@@ -1873,6 +1875,10 @@ static int inet_netconf_fill_devconf(struct sk_buff *skb, int ifindex,
nla_put_s32(skb, NETCONFA_MC_FORWARDING,
IPV4_DEVCONF(*devconf, MC_FORWARDING)) < 0)
goto nla_put_failure;
if ((all || type == NETCONFA_BC_FORWARDING) &&
nla_put_s32(skb, NETCONFA_BC_FORWARDING,
IPV4_DEVCONF(*devconf, BC_FORWARDING)) < 0)
goto nla_put_failure;
if ((all || type == NETCONFA_PROXY_NEIGH) &&
nla_put_s32(skb, NETCONFA_PROXY_NEIGH,
IPV4_DEVCONF(*devconf, PROXY_ARP)) < 0)
......@@ -2143,6 +2149,10 @@ static int devinet_conf_proc(struct ctl_table *ctl, int write,
if ((new_value == 0) && (old_value != 0))
rt_cache_flush(net);
if (i == IPV4_DEVCONF_BC_FORWARDING - 1 &&
new_value != old_value)
rt_cache_flush(net);
if (i == IPV4_DEVCONF_RP_FILTER - 1 &&
new_value != old_value) {
ifindex = devinet_conf_ifindex(net, cnf);
......@@ -2259,6 +2269,7 @@ static struct devinet_sysctl_table {
DEVINET_SYSCTL_COMPLEX_ENTRY(FORWARDING, "forwarding",
devinet_sysctl_forward),
DEVINET_SYSCTL_RO_ENTRY(MC_FORWARDING, "mc_forwarding"),
DEVINET_SYSCTL_RW_ENTRY(BC_FORWARDING, "bc_forwarding"),
DEVINET_SYSCTL_RW_ENTRY(ACCEPT_REDIRECTS, "accept_redirects"),
DEVINET_SYSCTL_RW_ENTRY(SECURE_REDIRECTS, "secure_redirects"),
......
......@@ -1996,8 +1996,11 @@ static int ip_route_input_slow(struct sk_buff *skb, __be32 daddr, __be32 saddr,
goto no_route;
}
if (res->type == RTN_BROADCAST)
if (res->type == RTN_BROADCAST) {
if (IN_DEV_BFORWARD(in_dev))
goto make_route;
goto brd_input;
}
if (res->type == RTN_LOCAL) {
err = fib_validate_source(skb, saddr, daddr, tos,
......@@ -2014,6 +2017,7 @@ static int ip_route_input_slow(struct sk_buff *skb, __be32 daddr, __be32 saddr,
if (res->type != RTN_UNICAST)
goto martian_destination;
make_route:
err = ip_mkroute_input(skb, res, in_dev, daddr, saddr, tos, flkeys);
out: return err;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册