drm/msm/dsi: Split PHY drivers to separate files

This change moves each PHY type specific code into
separate files.
Signed-off-by: NHai Li <hali@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

drivers/gpu/drm/msm/Makefile

 ccflags-y := -Iinclude/drm -Idrivers/gpu/drm/msm
-ccflags-$(CONFIG_DRM_MSM_DSI_PLL) += -Idrivers/gpu/drm/msm/dsi
+ccflags-$(CONFIG_DRM_MSM_DSI) += -Idrivers/gpu/drm/msm/dsi
 
 msm-y := \
 	adreno/adreno_device.o \
@@ -56,7 +56,9 @@ msm-$(CONFIG_COMMON_CLK) += mdp/mdp4/mdp4_lvds_pll.o
 msm-$(CONFIG_DRM_MSM_DSI) += dsi/dsi.o \
 			dsi/dsi_host.o \
 			dsi/dsi_manager.o \
-			dsi/dsi_phy.o \
+			dsi/phy/dsi_phy.o \
+			dsi/phy/dsi_phy_20nm.o \
+			dsi/phy/dsi_phy_28nm.o \
 			mdp/mdp5/mdp5_cmd_encoder.o
 
 msm-$(CONFIG_DRM_MSM_DSI_PLL) += dsi/pll/dsi_pll.o \

drivers/gpu/drm/msm/dsi/phy/dsi_phy.h

+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __DSI_PHY_H__
+#define __DSI_PHY_H__
+
+#include <linux/regulator/consumer.h>
+
+#include "dsi.h"
+
+#define dsi_phy_read(offset) msm_readl((offset))
+#define dsi_phy_write(offset, data) msm_writel((data), (offset))
+
+struct msm_dsi_phy_ops {
+	int (*enable)(struct msm_dsi_phy *phy, int src_pll_id,
+		const unsigned long bit_rate, const unsigned long esc_rate);
+	void (*disable)(struct msm_dsi_phy *phy);
+};
+
+struct msm_dsi_phy_cfg {
+	enum msm_dsi_phy_type type;
+	struct dsi_reg_config reg_cfg;
+	struct msm_dsi_phy_ops ops;
+
+	/*
+	 * Each cell {phy_id, pll_id} of the truth table indicates
+	 * if the source PLL selection bit should be set for each PHY.
+	 * Fill default H/W values in illegal cells, eg. cell {0, 1}.
+	 */
+	bool src_pll_truthtable[DSI_MAX][DSI_MAX];
+};
+
+extern const struct msm_dsi_phy_cfg dsi_phy_28nm_hpm_cfgs;
+extern const struct msm_dsi_phy_cfg dsi_phy_28nm_lp_cfgs;
+extern const struct msm_dsi_phy_cfg dsi_phy_20nm_cfgs;
+
+struct msm_dsi_dphy_timing {
+	u32 clk_pre;
+	u32 clk_post;
+	u32 clk_zero;
+	u32 clk_trail;
+	u32 clk_prepare;
+	u32 hs_exit;
+	u32 hs_zero;
+	u32 hs_prepare;
+	u32 hs_trail;
+	u32 hs_rqst;
+	u32 ta_go;
+	u32 ta_sure;
+	u32 ta_get;
+};
+
+struct msm_dsi_phy {
+	struct platform_device *pdev;
+	void __iomem *base;
+	void __iomem *reg_base;
+	int id;
+
+	struct clk *ahb_clk;
+	struct regulator_bulk_data supplies[DSI_DEV_REGULATOR_MAX];
+
+	struct msm_dsi_dphy_timing timing;
+	const struct msm_dsi_phy_cfg *cfg;
+
+	bool regulator_ldo_mode;
+
+	struct msm_dsi_pll *pll;
+};
+
+/*
+ * PHY internal functions
+ */
+int msm_dsi_dphy_timing_calc(struct msm_dsi_dphy_timing *timing,
+	const unsigned long bit_rate, const unsigned long esc_rate);
+void msm_dsi_phy_set_src_pll(struct msm_dsi_phy *phy, int pll_id, u32 reg,
+				u32 bit_mask);
+
+#endif /* __DSI_PHY_H__ */
+

drivers/gpu/drm/msm/dsi/phy/dsi_phy_20nm.c

+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "dsi_phy.h"
+#include "dsi.xml.h"
+
+static void dsi_20nm_dphy_set_timing(struct msm_dsi_phy *phy,
+		struct msm_dsi_dphy_timing *timing)
+{
+	void __iomem *base = phy->base;
+
+	dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_0,
+		DSI_20nm_PHY_TIMING_CTRL_0_CLK_ZERO(timing->clk_zero));
+	dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_1,
+		DSI_20nm_PHY_TIMING_CTRL_1_CLK_TRAIL(timing->clk_trail));
+	dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_2,
+		DSI_20nm_PHY_TIMING_CTRL_2_CLK_PREPARE(timing->clk_prepare));
+	if (timing->clk_zero & BIT(8))
+		dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_3,
+			DSI_20nm_PHY_TIMING_CTRL_3_CLK_ZERO_8);
+	dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_4,
+		DSI_20nm_PHY_TIMING_CTRL_4_HS_EXIT(timing->hs_exit));
+	dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_5,
+		DSI_20nm_PHY_TIMING_CTRL_5_HS_ZERO(timing->hs_zero));
+	dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_6,
+		DSI_20nm_PHY_TIMING_CTRL_6_HS_PREPARE(timing->hs_prepare));
+	dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_7,
+		DSI_20nm_PHY_TIMING_CTRL_7_HS_TRAIL(timing->hs_trail));
+	dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_8,
+		DSI_20nm_PHY_TIMING_CTRL_8_HS_RQST(timing->hs_rqst));
+	dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_9,
+		DSI_20nm_PHY_TIMING_CTRL_9_TA_GO(timing->ta_go) |
+		DSI_20nm_PHY_TIMING_CTRL_9_TA_SURE(timing->ta_sure));
+	dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_10,
+		DSI_20nm_PHY_TIMING_CTRL_10_TA_GET(timing->ta_get));
+	dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_11,
+		DSI_20nm_PHY_TIMING_CTRL_11_TRIG3_CMD(0));
+}
+
+static void dsi_20nm_phy_regulator_ctrl(struct msm_dsi_phy *phy, bool enable)
+{
+	void __iomem *base = phy->reg_base;
+
+	if (!enable) {
+		dsi_phy_write(base + REG_DSI_20nm_PHY_REGULATOR_CAL_PWR_CFG, 0);
+		return;
+	}
+
+	if (phy->regulator_ldo_mode) {
+		dsi_phy_write(phy->base + REG_DSI_20nm_PHY_LDO_CNTRL, 0x1d);
+		return;
+	}
+
+	/* non LDO mode */
+	dsi_phy_write(base + REG_DSI_20nm_PHY_REGULATOR_CTRL_1, 0x03);
+	dsi_phy_write(base + REG_DSI_20nm_PHY_REGULATOR_CTRL_2, 0x03);
+	dsi_phy_write(base + REG_DSI_20nm_PHY_REGULATOR_CTRL_3, 0x00);
+	dsi_phy_write(base + REG_DSI_20nm_PHY_REGULATOR_CTRL_4, 0x20);
+	dsi_phy_write(base + REG_DSI_20nm_PHY_REGULATOR_CAL_PWR_CFG, 0x01);
+	dsi_phy_write(phy->base + REG_DSI_20nm_PHY_LDO_CNTRL, 0x00);
+	dsi_phy_write(base + REG_DSI_20nm_PHY_REGULATOR_CTRL_0, 0x03);
+}
+
+static int dsi_20nm_phy_enable(struct msm_dsi_phy *phy, int src_pll_id,
+		const unsigned long bit_rate, const unsigned long esc_rate)
+{
+	struct msm_dsi_dphy_timing *timing = &phy->timing;
+	int i;
+	void __iomem *base = phy->base;
+	u32 cfg_4[4] = {0x20, 0x40, 0x20, 0x00};
+
+	DBG("");
+
+	if (msm_dsi_dphy_timing_calc(timing, bit_rate, esc_rate)) {
+		dev_err(&phy->pdev->dev,
+			"%s: D-PHY timing calculation failed\n", __func__);
+		return -EINVAL;
+	}
+
+	dsi_20nm_phy_regulator_ctrl(phy, true);
+
+	dsi_phy_write(base + REG_DSI_20nm_PHY_STRENGTH_0, 0xff);
+
+	msm_dsi_phy_set_src_pll(phy, src_pll_id,
+				REG_DSI_20nm_PHY_GLBL_TEST_CTRL,
+				DSI_20nm_PHY_GLBL_TEST_CTRL_BITCLK_HS_SEL);
+
+	for (i = 0; i < 4; i++) {
+		dsi_phy_write(base + REG_DSI_20nm_PHY_LN_CFG_3(i),
+							(i >> 1) * 0x40);
+		dsi_phy_write(base + REG_DSI_20nm_PHY_LN_TEST_STR_0(i), 0x01);
+		dsi_phy_write(base + REG_DSI_20nm_PHY_LN_TEST_STR_1(i), 0x46);
+		dsi_phy_write(base + REG_DSI_20nm_PHY_LN_CFG_0(i), 0x02);
+		dsi_phy_write(base + REG_DSI_20nm_PHY_LN_CFG_1(i), 0xa0);
+		dsi_phy_write(base + REG_DSI_20nm_PHY_LN_CFG_4(i), cfg_4[i]);
+	}
+
+	dsi_phy_write(base + REG_DSI_20nm_PHY_LNCK_CFG_3, 0x80);
+	dsi_phy_write(base + REG_DSI_20nm_PHY_LNCK_TEST_STR0, 0x01);
+	dsi_phy_write(base + REG_DSI_20nm_PHY_LNCK_TEST_STR1, 0x46);
+	dsi_phy_write(base + REG_DSI_20nm_PHY_LNCK_CFG_0, 0x00);
+	dsi_phy_write(base + REG_DSI_20nm_PHY_LNCK_CFG_1, 0xa0);
+	dsi_phy_write(base + REG_DSI_20nm_PHY_LNCK_CFG_2, 0x00);
+	dsi_phy_write(base + REG_DSI_20nm_PHY_LNCK_CFG_4, 0x00);
+
+	dsi_20nm_dphy_set_timing(phy, timing);
+
+	dsi_phy_write(base + REG_DSI_20nm_PHY_CTRL_1, 0x00);
+
+	dsi_phy_write(base + REG_DSI_20nm_PHY_STRENGTH_1, 0x06);
+
+	/* make sure everything is written before enable */
+	wmb();
+	dsi_phy_write(base + REG_DSI_20nm_PHY_CTRL_0, 0x7f);
+
+	return 0;
+}
+
+static void dsi_20nm_phy_disable(struct msm_dsi_phy *phy)
+{
+	dsi_phy_write(phy->base + REG_DSI_20nm_PHY_CTRL_0, 0);
+	dsi_20nm_phy_regulator_ctrl(phy, false);
+}
+
+const struct msm_dsi_phy_cfg dsi_phy_20nm_cfgs = {
+	.type = MSM_DSI_PHY_20NM,
+	.src_pll_truthtable = { {false, true}, {false, true} },
+	.reg_cfg = {
+		.num = 2,
+		.regs = {
+			{"vddio", 1800000, 1800000, 100000, 100},
+			{"vcca", 1000000, 1000000, 10000, 100},
+		},
+	},
+	.ops = {
+		.enable = dsi_20nm_phy_enable,
+		.disable = dsi_20nm_phy_disable,
+	}
+};
+

drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c

+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "dsi_phy.h"
+#include "dsi.xml.h"
+
+static void dsi_28nm_dphy_set_timing(struct msm_dsi_phy *phy,
+		struct msm_dsi_dphy_timing *timing)
+{
+	void __iomem *base = phy->base;
+
+	dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_0,
+		DSI_28nm_PHY_TIMING_CTRL_0_CLK_ZERO(timing->clk_zero));
+	dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_1,
+		DSI_28nm_PHY_TIMING_CTRL_1_CLK_TRAIL(timing->clk_trail));
+	dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_2,
+		DSI_28nm_PHY_TIMING_CTRL_2_CLK_PREPARE(timing->clk_prepare));
+	if (timing->clk_zero & BIT(8))
+		dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_3,
+			DSI_28nm_PHY_TIMING_CTRL_3_CLK_ZERO_8);
+	dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_4,
+		DSI_28nm_PHY_TIMING_CTRL_4_HS_EXIT(timing->hs_exit));
+	dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_5,
+		DSI_28nm_PHY_TIMING_CTRL_5_HS_ZERO(timing->hs_zero));
+	dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_6,
+		DSI_28nm_PHY_TIMING_CTRL_6_HS_PREPARE(timing->hs_prepare));
+	dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_7,
+		DSI_28nm_PHY_TIMING_CTRL_7_HS_TRAIL(timing->hs_trail));
+	dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_8,
+		DSI_28nm_PHY_TIMING_CTRL_8_HS_RQST(timing->hs_rqst));
+	dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_9,
+		DSI_28nm_PHY_TIMING_CTRL_9_TA_GO(timing->ta_go) |
+		DSI_28nm_PHY_TIMING_CTRL_9_TA_SURE(timing->ta_sure));
+	dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_10,
+		DSI_28nm_PHY_TIMING_CTRL_10_TA_GET(timing->ta_get));
+	dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_11,
+		DSI_28nm_PHY_TIMING_CTRL_11_TRIG3_CMD(0));
+}
+
+static void dsi_28nm_phy_regulator_ctrl(struct msm_dsi_phy *phy, bool enable)
+{
+	void __iomem *base = phy->reg_base;
+
+	if (!enable) {
+		dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CAL_PWR_CFG, 0);
+		return;
+	}
+
+	dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_0, 0x0);
+	dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CAL_PWR_CFG, 1);
+	dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_5, 0);
+	dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_3, 0);
+	dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_2, 0x3);
+	dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_1, 0x9);
+	dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_0, 0x7);
+	dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_4, 0x20);
+}
+
+static int dsi_28nm_phy_enable(struct msm_dsi_phy *phy, int src_pll_id,
+		const unsigned long bit_rate, const unsigned long esc_rate)
+{
+	struct msm_dsi_dphy_timing *timing = &phy->timing;
+	int i;
+	void __iomem *base = phy->base;
+
+	DBG("");
+
+	if (msm_dsi_dphy_timing_calc(timing, bit_rate, esc_rate)) {
+		dev_err(&phy->pdev->dev,
+			"%s: D-PHY timing calculation failed\n", __func__);
+		return -EINVAL;
+	}
+
+	dsi_phy_write(base + REG_DSI_28nm_PHY_STRENGTH_0, 0xff);
+
+	dsi_28nm_phy_regulator_ctrl(phy, true);
+
+	dsi_phy_write(base + REG_DSI_28nm_PHY_LDO_CNTRL, 0x00);
+
+	dsi_28nm_dphy_set_timing(phy, timing);
+
+	dsi_phy_write(base + REG_DSI_28nm_PHY_CTRL_1, 0x00);
+	dsi_phy_write(base + REG_DSI_28nm_PHY_CTRL_0, 0x5f);
+
+	dsi_phy_write(base + REG_DSI_28nm_PHY_STRENGTH_1, 0x6);
+
+	for (i = 0; i < 4; i++) {
+		dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_0(i), 0);
+		dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_1(i), 0);
+		dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_2(i), 0);
+		dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_3(i), 0);
+		dsi_phy_write(base + REG_DSI_28nm_PHY_LN_TEST_DATAPATH(i), 0);
+		dsi_phy_write(base + REG_DSI_28nm_PHY_LN_DEBUG_SEL(i), 0);
+		dsi_phy_write(base + REG_DSI_28nm_PHY_LN_TEST_STR_0(i), 0x1);
+		dsi_phy_write(base + REG_DSI_28nm_PHY_LN_TEST_STR_1(i), 0x97);
+	}
+	dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_4(0), 0);
+	dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_4(1), 0x5);
+	dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_4(2), 0xa);
+	dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_4(3), 0xf);
+
+	dsi_phy_write(base + REG_DSI_28nm_PHY_LNCK_CFG_1, 0xc0);
+	dsi_phy_write(base + REG_DSI_28nm_PHY_LNCK_TEST_STR0, 0x1);
+	dsi_phy_write(base + REG_DSI_28nm_PHY_LNCK_TEST_STR1, 0xbb);
+
+	dsi_phy_write(base + REG_DSI_28nm_PHY_CTRL_0, 0x5f);
+
+	msm_dsi_phy_set_src_pll(phy, src_pll_id,
+				REG_DSI_28nm_PHY_GLBL_TEST_CTRL,
+				DSI_28nm_PHY_GLBL_TEST_CTRL_BITCLK_HS_SEL);
+
+	return 0;
+}
+
+static void dsi_28nm_phy_disable(struct msm_dsi_phy *phy)
+{
+	dsi_phy_write(phy->base + REG_DSI_28nm_PHY_CTRL_0, 0);
+	dsi_28nm_phy_regulator_ctrl(phy, false);
+
+	/*
+	 * Wait for the registers writes to complete in order to
+	 * ensure that the phy is completely disabled
+	 */
+	wmb();
+}
+
+const struct msm_dsi_phy_cfg dsi_phy_28nm_hpm_cfgs = {
+	.type = MSM_DSI_PHY_28NM_HPM,
+	.src_pll_truthtable = { {true, true}, {false, true} },
+	.reg_cfg = {
+		.num = 1,
+		.regs = {
+			{"vddio", 1800000, 1800000, 100000, 100},
+		},
+	},
+	.ops = {
+		.enable = dsi_28nm_phy_enable,
+		.disable = dsi_28nm_phy_disable,
+	},
+};
+
+const struct msm_dsi_phy_cfg dsi_phy_28nm_lp_cfgs = {
+	.type = MSM_DSI_PHY_28NM_LP,
+	.src_pll_truthtable = { {true, true}, {true, true} },
+	.reg_cfg = {
+		.num = 1,
+		.regs = {
+			{"vddio", 1800000, 1800000, 100000, 100},
+		},
+	},
+	.ops = {
+		.enable = dsi_28nm_phy_enable,
+		.disable = dsi_28nm_phy_disable,
+	},
+};
+