提交 5c7d9bbe 编写于 作者: J Jarkko Nikula 提交者: Tony Lindgren

omap: rx51: Use REGULATOR_SUPPLY macro when initializingregulator consumers

There is REGULATOR_SUPPLY macro available for initializing the struct
regulator_consumer_supply so use it where applicable (all other supplies
than vdds_sdi) as it improves the readability.
Signed-off-by: NJarkko Nikula <jhnikula@gmail.com>
Acked-by: NEduardo Valentin <eduardo.valentin@nokia.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
上级 87581fd4
......@@ -301,48 +301,27 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
{} /* Terminator */
};
static struct regulator_consumer_supply rx51_vmmc1_supply = {
.supply = "vmmc",
.dev_name = "mmci-omap-hs.0",
};
static struct regulator_consumer_supply rx51_vmmc1_supply =
REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0");
static struct regulator_consumer_supply rx51_vaux3_supply = {
.supply = "vmmc",
.dev_name = "mmci-omap-hs.1",
};
static struct regulator_consumer_supply rx51_vaux3_supply =
REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1");
static struct regulator_consumer_supply rx51_vsim_supply = {
.supply = "vmmc_aux",
.dev_name = "mmci-omap-hs.1",
};
static struct regulator_consumer_supply rx51_vsim_supply =
REGULATOR_SUPPLY("vmmc_aux", "mmci-omap-hs.1");
static struct regulator_consumer_supply rx51_vmmc2_supplies[] = {
/* tlv320aic3x analog supplies */
{
.supply = "AVDD",
.dev_name = "2-0018",
},
{
.supply = "DRVDD",
.dev_name = "2-0018",
},
REGULATOR_SUPPLY("AVDD", "2-0018"),
REGULATOR_SUPPLY("DRVDD", "2-0018"),
/* Keep vmmc as last item. It is not iterated for newer boards */
{
.supply = "vmmc",
.dev_name = "mmci-omap-hs.1",
},
REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1"),
};
static struct regulator_consumer_supply rx51_vio_supplies[] = {
/* tlv320aic3x digital supplies */
{
.supply = "IOVDD",
.dev_name = "2-0018"
},
{
.supply = "DVDD",
.dev_name = "2-0018"
},
REGULATOR_SUPPLY("IOVDD", "2-0018"),
REGULATOR_SUPPLY("DVDD", "2-0018"),
};
#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册