ARM: dts: sun8i: Add A23 usb-phy and otg nodes

Note these are added to the sun8i-a23.dtsi file rather then to the shared
sun8i-a23-a33.dtsi file as both the phy and the otg controller on the a33
are slightly different.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

arch/arm/boot/dts/sun8i-a23.dtsi

@@ -58,6 +58,39 @@
 			clock-output-names = "mbus";
 		};
 	};
+
+	soc@01c00000 {
+		usb_otg: usb@01c19000 {
+			compatible = "allwinner,sun6i-a31-musb";
+			reg = <0x01c19000 0x0400>;
+			clocks = <&ahb1_gates 24>;
+			resets = <&ahb1_rst 24>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			status = "disabled";
+		};
+
+		usbphy: phy@01c19400 {
+			compatible = "allwinner,sun8i-a23-usb-phy";
+			reg = <0x01c19400 0x10>,
+			      <0x01c1a800 0x4>;
+			reg-names = "phy_ctrl",
+				    "pmu1";
+			clocks = <&usb_clk 8>,
+				 <&usb_clk 9>;
+			clock-names = "usb0_phy",
+				      "usb1_phy";
+			resets = <&usb_clk 0>,
+				 <&usb_clk 1>;
+			reset-names = "usb0_reset",
+				      "usb1_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+	};
 };
 
 &pio {