Merge branches 'for-2639/i2c-eg20t', 'for-2639/i2c-shmobile',...

Merge branches 'for-2639/i2c-eg20t', 'for-2639/i2c-shmobile', 'for-2639/i2c-tegra' and 'for-2639/i2c-nomadik2' into for-linus/2640/i2c

CREDITS

@@ -328,7 +328,7 @@ S: Haifa, Israel
 N: Johannes Berg
 E: johannes@sipsolutions.net
 W: http://johannes.sipsolutions.net/
-P: 1024D/9AB78CA5 AD02 0176 4E29 C137 1DF6 08D2 FC44 CF86 9AB7 8CA5
+P: 4096R/7BF9099A C0EB C440 F6DA 091C 884D  8532 E0F3 73F3 7BF9 099A
 D: powerpc & 802.11 hacker
 
 N: Stephen R. van den Berg (AKA BuGless)

Documentation/00-INDEX

@@ -328,8 +328,6 @@ sysrq.txt
 	- info on the magic SysRq key.
 telephony/
 	- directory with info on telephony (e.g. voice over IP) support.
-uml/
-	- directory with information about User Mode Linux.
 unicode.txt
 	- info on the Unicode character/font mapping used in Linux.
 unshare.txt

Documentation/ABI/obsolete/sysfs-driver-hid-roccat-koneplus

+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/startup_profile
+Date:		October 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The integer value of this attribute ranges from 0-4.
+                When read, this attribute returns the number of the actual
+                profile. This value is persistent, so its equivalent to the
+                profile that's active when the mouse is powered on next time.
+		When written, this file sets the number of the startup profile
+		and the mouse activates this profile immediately.
+		Please use actual_profile, it does the same thing.

Documentation/ABI/testing/sysfs-bus-bcma

+What:		/sys/bus/bcma/devices/.../manuf
+Date:		May 2011
+KernelVersion:	2.6.40
+Contact:	Rafał Miłecki <zajec5@gmail.com>
+Description:
+		Each BCMA core has it's manufacturer id. See
+		include/linux/bcma/bcma.h for possible values.
+
+What:		/sys/bus/bcma/devices/.../id
+Date:		May 2011
+KernelVersion:	2.6.40
+Contact:	Rafał Miłecki <zajec5@gmail.com>
+Description:
+		There are a few types of BCMA cores, they can be identified by
+		id field.
+
+What:		/sys/bus/bcma/devices/.../rev
+Date:		May 2011
+KernelVersion:	2.6.40
+Contact:	Rafał Miłecki <zajec5@gmail.com>
+Description:
+		BCMA cores of the same type can still slightly differ depending
+		on their revision. Use it for detailed programming.
+
+What:		/sys/bus/bcma/devices/.../class
+Date:		May 2011
+KernelVersion:	2.6.40
+Contact:	Rafał Miłecki <zajec5@gmail.com>
+Description:
+		Each BCMA core is identified by few fields, including class it
+		belongs to. See include/linux/bcma/bcma.h for possible values.

Documentation/ABI/testing/sysfs-bus-pci

@@ -74,6 +74,15 @@ Description:
 		hot-remove the PCI device and any of its children.
 		Depends on CONFIG_HOTPLUG.
 
+What:		/sys/bus/pci/devices/.../pci_bus/.../rescan
+Date:		May 2011
+Contact:	Linux PCI developers <linux-pci@vger.kernel.org>
+Description:
+		Writing a non-zero value to this attribute will
+		force a rescan of the bus and all child buses,
+		and re-discover devices removed earlier from this
+		part of the device tree.  Depends on CONFIG_HOTPLUG.
+
 What:		/sys/bus/pci/devices/.../rescan
 Date:		January 2009
 Contact:	Linux PCI developers <linux-pci@vger.kernel.org>

Documentation/ABI/testing/sysfs-devices-system-cpu

@@ -183,21 +183,21 @@ Description:	Discover and change clock speed of CPUs
 		to learn how to control the knobs.
 
 
-What:      /sys/devices/system/cpu/cpu*/cache/index*/cache_disable_X
-Date:      August 2008
+What:		/sys/devices/system/cpu/cpu*/cache/index3/cache_disable_{0,1}
+Date:		August 2008
 KernelVersion:	2.6.27
-Contact:	mark.langsdorf@amd.com
-Description:	These files exist in every cpu's cache index directories.
-		There are currently 2 cache_disable_# files in each
-		directory.  Reading from these files on a supported
-		processor will return that cache disable index value
-		for that processor and node.  Writing to one of these
-		files will cause the specificed cache index to be disabled.
-
-		Currently, only AMD Family 10h Processors support cache index
-		disable, and only for their L3 caches.  See the BIOS and
-		Kernel Developer's Guide at
-		http://support.amd.com/us/Embedded_TechDocs/31116-Public-GH-BKDG_3-28_5-28-09.pdf	
-		for formatting information and other details on the
-		cache index disable.
-Users:    joachim.deguara@amd.com
+Contact:	discuss@x86-64.org
+Description:	Disable L3 cache indices
+
+		These files exist in every CPU's cache/index3 directory. Each
+		cache_disable_{0,1} file corresponds to one disable slot which
+		can be used to disable a cache index. Reading from these files
+		on a processor with this functionality will return the currently
+		disabled index for that node. There is one L3 structure per
+		node, or per internal node on MCM machines. Writing a valid
+		index to one of these files will cause the specificed cache
+		index to be disabled.
+
+		All AMD processors with L3 caches provide this functionality.
+		For details, see BKDGs at
+		http://developer.amd.com/documentation/guides/Pages/default.aspx

Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus

 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/actual_profile
 Date:		October 2010
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	When read, this file returns the number of the actual profile in
-		range 0-4.
-		This file is readonly.
+Description:	The integer value of this attribute ranges from 0-4.
+                When read, this attribute returns the number of the actual
+                profile. This value is persistent, so its equivalent to the
+                profile that's active when the mouse is powered on next time.
+		When written, this file sets the number of the startup profile
+		and the mouse activates this profile immediately.
 Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/firmware_version
@@ -89,16 +92,6 @@ Description:	The mouse has a tracking- and a distance-control-unit. These
 		This file is writeonly.
 Users:		http://roccat.sourceforge.net
 
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/startup_profile
-Date:		October 2010
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	The integer value of this attribute ranges from 0-4.
-                When read, this attribute returns the number of the profile
-                that's active when the mouse is powered on.
-		When written, this file sets the number of the startup profile
-		and the mouse activates this profile immediately.
-Users:		http://roccat.sourceforge.net
-
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/tcu
 Date:		October 2010
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>

Documentation/ABI/testing/sysfs-firmware-dmi

@@ -14,14 +14,15 @@ Description:
 
 		DMI is structured as a large table of entries, where
 		each entry has a common header indicating the type and
-		length of the entry, as well as 'handle' that is
-		supposed to be unique amongst all entries.
+		length of the entry, as well as a firmware-provided
+		'handle' that is supposed to be unique amongst all
+		entries.
 
 		Some entries are required by the specification, but many
 		others are optional.  In general though, users should
 		never expect to find a specific entry type on their
 		system unless they know for certain what their firmware
-		is doing.  Machine to machine will vary.
+		is doing.  Machine to machine experiences will vary.
 
 		Multiple entries of the same type are allowed.  In order
 		to handle these duplicate entry types, each entry is
@@ -67,25 +68,24 @@ Description:
 			  and the two terminating nul characters.
 		type	: The type of the entry.  This value is the same
 			  as found in the directory name.  It indicates
-			  how the rest of the entry should be
-			  interpreted.
+			  how the rest of the entry should be interpreted.
 		instance: The instance ordinal of the entry for the
 			  given type.  This value is the same as found
 			  in the parent directory name.
-		position: The position of the entry within the entirety
-			  of the entirety.
+		position: The ordinal position (zero-based) of the entry
+			  within the entirety of the DMI entry table.
 
 		=== Entry Specialization ===
 
 		Some entry types may have other information available in
-		sysfs.
+		sysfs.  Not all types are specialized.
 
 		--- Type 15 - System Event Log ---
 
 		This entry allows the firmware to export a log of
 		events the system has taken.  This information is
 		typically backed by nvram, but the implementation
-		details are abstracted by this table.  This entries data
+		details are abstracted by this table.  This entry's data
 		is exported in the directory:
 
 		/sys/firmware/dmi/entries/15-0/system_event_log

Documentation/ABI/testing/sysfs-firmware-gsmi

+What:		/sys/firmware/gsmi
+Date:		March 2011
+Contact:	Mike Waychison <mikew@google.com>
+Description:
+		Some servers used internally at Google have firmware
+		that provides callback functionality via explicit SMI
+		triggers.  Some of the callbacks are similar to those
+		provided by the EFI runtime services page, but due to
+		historical reasons this different entry-point has been
+		used.
+
+		The gsmi driver implements the kernel's abstraction for
+		these firmware callbacks.  Currently, this functionality
+		is limited to handling the system event log and getting
+		access to EFI-style variables stored in nvram.
+
+		Layout:
+
+		/sys/firmware/gsmi/vars:
+
+			This directory has the same layout (and
+			underlying implementation as /sys/firmware/efi/vars.
+			See Documentation/ABI/*/sysfs-firmware-efi-vars
+			for more information on how to interact with
+			this structure.
+
+		/sys/firmware/gsmi/append_to_eventlog - write-only:
+
+			This file takes a binary blob and passes it onto
+			the firmware to be timestamped and appended to
+			the system eventlog.  The binary format is
+			interpreted by the firmware and may change from
+			platform to platform.  The only kernel-enforced
+			requirement is that the blob be prefixed with a
+			32bit host-endian type used as part of the
+			firmware call.
+
+		/sys/firmware/gsmi/clear_config - write-only:
+
+			Writing any value to this file will cause the
+			entire firmware configuration to be reset to
+			"factory defaults".  Callers should assume that
+			a reboot is required for the configuration to be
+			cleared.
+
+		/sys/firmware/gsmi/clear_eventlog - write-only:
+
+			This file is used to clear out a portion/the
+			whole of the system event log.  Values written
+			should be values between 1 and 100 inclusive (in
+			ASCII) representing the fraction of the log to
+			clear.  Not all platforms support fractional
+			clearing though, and this writes to this file
+			will error out if the firmware doesn't like your
+			submitted fraction.
+
+			Callers should assume that a reboot is needed
+			for this operation to complete.

Documentation/ABI/testing/sysfs-firmware-log

+What:		/sys/firmware/log
+Date:		February 2011
+Contact:	Mike Waychison <mikew@google.com>
+Description:
+		The /sys/firmware/log is a binary file that represents a
+		read-only copy of the firmware's log if one is
+		available.

Documentation/ABI/testing/sysfs-kernel-fscaps

+What:		/sys/kernel/fscaps
+Date:		February 2011
+KernelVersion:	2.6.38
+Contact:	Ludwig Nussel <ludwig.nussel@suse.de>
+Description
+		Shows whether file system capabilities are honored
+		when executing a binary
+

Documentation/ABI/testing/sysfs-power

@@ -158,3 +158,17 @@ Description:
 		successful, will make the kernel abort a subsequent transition
 		to a sleep state if any wakeup events are reported after the
 		write has returned.
+
+What:		/sys/power/reserved_size
+Date:		May 2011
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/power/reserved_size file allows user space to control
+		the amount of memory reserved for allocations made by device
+		drivers during the "device freeze" stage of hibernation.  It can
+		be written a string representing a non-negative integer that
+		will be used as the amount of memory to reserve for allocations
+		made by device drivers' "freeze" callbacks, in bytes.
+
+		Reading from this file will display the current value, which is
+		set to 1 MB by default.

Documentation/DocBook/.gitignore

@@ -8,3 +8,4 @@
 *.dvi
 *.log
 *.out
+media/

Documentation/DocBook/device-drivers.tmpl

@@ -96,10 +96,10 @@ X!Iinclude/linux/kobject.h
 
   <chapter id="devdrivers">
      <title>Device drivers infrastructure</title>
+     <sect1><title>The Basic Device Driver-Model Structures </title>
+!Iinclude/linux/device.h
+     </sect1>
      <sect1><title>Device Drivers Base</title>
-<!--
-X!Iinclude/linux/device.h
--->
 !Edrivers/base/driver.c
 !Edrivers/base/core.c
 !Edrivers/base/class.c

Documentation/DocBook/dvb/dvbapi.xml

@@ -34,6 +34,14 @@
 
 <revhistory>
 <!-- Put document revisions here, newest first. -->
+<revision>
+	<revnumber>2.0.4</revnumber>
+	<date>2011-05-06</date>
+	<authorinitials>mcc</authorinitials>
+	<revremark>
+		Add more information about DVB APIv5, better describing the frontend GET/SET props ioctl's.
+	</revremark>
+</revision>
 <revision>
 	<revnumber>2.0.3</revnumber>
 	<date>2010-07-03</date>

Documentation/DocBook/dvb/dvbproperty.xml

-<section id="FE_GET_PROPERTY">
+<section id="FE_GET_SET_PROPERTY">
 <title>FE_GET_PROPERTY/FE_SET_PROPERTY</title>
 
+<programlisting>
+/* Reserved fields should be set to 0 */
+struct dtv_property {
+	__u32 cmd;
+	union {
+		__u32 data;
+		struct {
+			__u8 data[32];
+			__u32 len;
+			__u32 reserved1[3];
+			void *reserved2;
+		} buffer;
+	} u;
+	int result;
+} __attribute__ ((packed));
+
+/* num of properties cannot exceed DTV_IOCTL_MAX_MSGS per ioctl */
+#define DTV_IOCTL_MAX_MSGS 64
+
+struct dtv_properties {
+	__u32 num;
+	struct dtv_property *props;
+};
+</programlisting>
+
+<section id="FE_GET_PROPERTY">
+<title>FE_GET_PROPERTY</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call returns one or more frontend properties. This call only
+ requires read-only access to the device.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = <link linkend="FE_GET_PROPERTY">FE_GET_PROPERTY</link>,
+ dtv_properties &#x22C6;props);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int num</para>
+</entry><entry
+ align="char">
+<para>Equals <link linkend="FE_GET_PROPERTY">FE_GET_PROPERTY</link> for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct dtv_property *props</para>
+</entry><entry
+ align="char">
+<para>Points to the location where the front-end property commands are stored.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>ERRORS</para>
+<informaltable><tgroup cols="2"><tbody><row>
+  <entry align="char"><para>EINVAL</para></entry>
+  <entry align="char"><para>Invalid parameter(s) received or number of parameters out of the range.</para></entry>
+ </row><row>
+  <entry align="char"><para>ENOMEM</para></entry>
+  <entry align="char"><para>Out of memory.</para></entry>
+ </row><row>
+  <entry align="char"><para>EFAULT</para></entry>
+  <entry align="char"><para>Failure while copying data from/to userspace.</para></entry>
+ </row><row>
+  <entry align="char"><para>EOPNOTSUPP</para></entry>
+  <entry align="char"><para>Property type not supported.</para></entry>
+ </row></tbody></tgroup></informaltable>
+</section>
+
+<section id="FE_SET_PROPERTY">
+<title>FE_SET_PROPERTY</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call sets one or more frontend properties. This call only
+ requires read-only access to the device.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = <link linkend="FE_SET_PROPERTY">FE_SET_PROPERTY</link>,
+ dtv_properties &#x22C6;props);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int num</para>
+</entry><entry
+ align="char">
+<para>Equals <link linkend="FE_SET_PROPERTY">FE_SET_PROPERTY</link> for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct dtv_property *props</para>
+</entry><entry
+ align="char">
+<para>Points to the location where the front-end property commands are stored.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>ERRORS
+</para>
+<informaltable><tgroup cols="2"><tbody><row>
+  <entry align="char"><para>EINVAL</para></entry>
+  <entry align="char"><para>Invalid parameter(s) received or number of parameters out of the range.</para></entry>
+ </row><row>
+  <entry align="char"><para>ENOMEM</para></entry>
+  <entry align="char"><para>Out of memory.</para></entry>
+ </row><row>
+  <entry align="char"><para>EFAULT</para></entry>
+  <entry align="char"><para>Failure while copying data from/to userspace.</para></entry>
+ </row><row>
+  <entry align="char"><para>EOPNOTSUPP</para></entry>
+  <entry align="char"><para>Property type not supported.</para></entry>
+ </row></tbody></tgroup></informaltable>
+</section>
+
+<para>
+On <link linkend="FE_GET_PROPERTY">FE_GET_PROPERTY</link>/<link linkend="FE_SET_PROPERTY">FE_SET_PROPERTY</link>,
+the actual action is determined by the dtv_property cmd/data pairs. With one single ioctl, is possible to
+get/set up to 64 properties. The actual meaning of each property is described on the next sections.
+</para>
+
+<para>The Available frontend property types are:</para>
+<programlisting>
+#define DTV_UNDEFINED		0
+#define DTV_TUNE		1
+#define DTV_CLEAR		2
+#define DTV_FREQUENCY		3
+#define DTV_MODULATION		4
+#define DTV_BANDWIDTH_HZ	5
+#define DTV_INVERSION		6
+#define DTV_DISEQC_MASTER	7
+#define DTV_SYMBOL_RATE		8
+#define DTV_INNER_FEC		9
+#define DTV_VOLTAGE		10
+#define DTV_TONE		11
+#define DTV_PILOT		12
+#define DTV_ROLLOFF		13
+#define DTV_DISEQC_SLAVE_REPLY	14
+#define DTV_FE_CAPABILITY_COUNT	15
+#define DTV_FE_CAPABILITY	16
+#define DTV_DELIVERY_SYSTEM	17
+#define DTV_ISDBT_PARTIAL_RECEPTION	18
+#define DTV_ISDBT_SOUND_BROADCASTING	19
+#define DTV_ISDBT_SB_SUBCHANNEL_ID	20
+#define DTV_ISDBT_SB_SEGMENT_IDX	21
+#define DTV_ISDBT_SB_SEGMENT_COUNT	22
+#define DTV_ISDBT_LAYERA_FEC			23
+#define DTV_ISDBT_LAYERA_MODULATION		24
+#define DTV_ISDBT_LAYERA_SEGMENT_COUNT		25
+#define DTV_ISDBT_LAYERA_TIME_INTERLEAVING	26
+#define DTV_ISDBT_LAYERB_FEC			27
+#define DTV_ISDBT_LAYERB_MODULATION		28
+#define DTV_ISDBT_LAYERB_SEGMENT_COUNT		29
+#define DTV_ISDBT_LAYERB_TIME_INTERLEAVING	30
+#define DTV_ISDBT_LAYERC_FEC			31
+#define DTV_ISDBT_LAYERC_MODULATION		32
+#define DTV_ISDBT_LAYERC_SEGMENT_COUNT		33
+#define DTV_ISDBT_LAYERC_TIME_INTERLEAVING	34
+#define DTV_API_VERSION		35
+#define DTV_CODE_RATE_HP	36
+#define DTV_CODE_RATE_LP	37
+#define DTV_GUARD_INTERVAL	38
+#define DTV_TRANSMISSION_MODE	39
+#define DTV_HIERARCHY		40
+#define DTV_ISDBT_LAYER_ENABLED	41
+#define DTV_ISDBS_TS_ID		42
+</programlisting>
+
+<section id="fe_property_common">
+	<title>Parameters that are common to all Digital TV standards</title>
+	<section id="DTV_FREQUENCY">
+		<title><constant>DTV_FREQUENCY</constant></title>
+
+		<para>Central frequency of the channel, in HZ.</para>
+
+		<para>Notes:</para>
+		<para>1)For ISDB-T, the channels are usually transmitted with an offset of 143kHz.
+			E.g. a valid frequncy could be 474143 kHz. The stepping is bound to the bandwidth of
+			the channel which is 6MHz.</para>
+
+		<para>2)As in ISDB-Tsb the channel consists of only one or three segments the
+			frequency step is 429kHz, 3*429 respectively. As for ISDB-T the
+			central frequency of the channel is expected.</para>
+	</section>
+
+	<section id="DTV_BANDWIDTH_HZ">
+		<title><constant>DTV_BANDWIDTH_HZ</constant></title>
+
+		<para>Bandwidth for the channel, in HZ.</para>
+
+		<para>Possible values:
+			<constant>1712000</constant>,
+			<constant>5000000</constant>,
+			<constant>6000000</constant>,
+			<constant>7000000</constant>,
+			<constant>8000000</constant>,
+			<constant>10000000</constant>.
+		</para>
+
+		<para>Notes:</para>
+
+		<para>1) For ISDB-T it should be always 6000000Hz (6MHz)</para>
+		<para>2) For ISDB-Tsb it can vary depending on the number of connected segments</para>
+		<para>3) Bandwidth doesn't apply for DVB-C transmissions, as the bandwidth
+			 for DVB-C depends on the symbol rate</para>
+		<para>4) Bandwidth in ISDB-T is fixed (6MHz) or can be easily derived from
+			other parameters (DTV_ISDBT_SB_SEGMENT_IDX,
+			DTV_ISDBT_SB_SEGMENT_COUNT).</para>
+		<para>5) DVB-T supports 6, 7 and 8MHz.</para>
+		<para>6) In addition, DVB-T2 supports 1.172, 5 and 10MHz.</para>
+	</section>
+
+	<section id="DTV_DELIVERY_SYSTEM">
+		<title><constant>DTV_DELIVERY_SYSTEM</constant></title>
+
+		<para>Specifies the type of Delivery system</para>
+
+		<para>Possible values: </para>
+<programlisting>
+typedef enum fe_delivery_system {
+	SYS_UNDEFINED,
+	SYS_DVBC_ANNEX_AC,
+	SYS_DVBC_ANNEX_B,
+	SYS_DVBT,
+	SYS_DSS,
+	SYS_DVBS,
+	SYS_DVBS2,
+	SYS_DVBH,
+	SYS_ISDBT,
+	SYS_ISDBS,
+	SYS_ISDBC,
+	SYS_ATSC,
+	SYS_ATSCMH,
+	SYS_DMBTH,
+	SYS_CMMB,
+	SYS_DAB,
+	SYS_DVBT2,
+} fe_delivery_system_t;
+</programlisting>
+
+	</section>
+
+	<section id="DTV_TRANSMISSION_MODE">
+		<title><constant>DTV_TRANSMISSION_MODE</constant></title>
+
+		<para>Specifies the number of carriers used by the standard</para>
+
+		<para>Possible values are:</para>
+<programlisting>
+typedef enum fe_transmit_mode {
+	TRANSMISSION_MODE_2K,
+	TRANSMISSION_MODE_8K,
+	TRANSMISSION_MODE_AUTO,
+	TRANSMISSION_MODE_4K,
+	TRANSMISSION_MODE_1K,
+	TRANSMISSION_MODE_16K,
+	TRANSMISSION_MODE_32K,
+} fe_transmit_mode_t;
+</programlisting>
+
+		<para>Notes:</para>
+		<para>1) ISDB-T supports three carrier/symbol-size: 8K, 4K, 2K. It is called
+			'mode' in the standard: Mode 1 is 2K, mode 2 is 4K, mode 3 is 8K</para>
+
+		<para>2) If <constant>DTV_TRANSMISSION_MODE</constant> is set the <constant>TRANSMISSION_MODE_AUTO</constant> the
+			hardware will try to find the correct FFT-size (if capable) and will
+			use TMCC to fill in the missing parameters.</para>
+		<para>3) DVB-T specifies 2K and 8K as valid sizes.</para>
+		<para>4) DVB-T2 specifies 1K, 2K, 4K, 8K, 16K and 32K.</para>
+	</section>
+
+	<section id="DTV_GUARD_INTERVAL">
+		<title><constant>DTV_GUARD_INTERVAL</constant></title>
+
+		<para>Possible values are:</para>
+<programlisting>
+typedef enum fe_guard_interval {
+	GUARD_INTERVAL_1_32,
+	GUARD_INTERVAL_1_16,
+	GUARD_INTERVAL_1_8,
+	GUARD_INTERVAL_1_4,
+	GUARD_INTERVAL_AUTO,
+	GUARD_INTERVAL_1_128,
+	GUARD_INTERVAL_19_128,
+	GUARD_INTERVAL_19_256,
+} fe_guard_interval_t;
+</programlisting>
+
+		<para>Notes:</para>
+		<para>1) If <constant>DTV_GUARD_INTERVAL</constant> is set the <constant>GUARD_INTERVAL_AUTO</constant> the hardware will
+			try to find the correct guard interval (if capable) and will use TMCC to fill
+			in the missing parameters.</para>
+		<para>2) Intervals 1/128, 19/128 and 19/256 are used only for DVB-T2 at present</para>
+	</section>
+</section>
+
 <section id="isdbt">
 	<title>ISDB-T frontend</title>
 	<para>This section describes shortly what are the possible parameters in the Linux
@@ -32,73 +353,6 @@
 
 	<para>Parameters used by ISDB-T and ISDB-Tsb.</para>
 
-	<section id="isdbt-parms">
-		<title>Parameters that are common with DVB-T and ATSC</title>
-
-		<section id="isdbt-freq">
-			<title><constant>DTV_FREQUENCY</constant></title>
-
-			<para>Central frequency of the channel.</para>
-
-			<para>For ISDB-T the channels are usually transmitted with an offset of 143kHz. E.g. a
-				valid frequncy could be 474143 kHz. The stepping is bound to the bandwidth of
-				the channel which is 6MHz.</para>
-
-			<para>As in ISDB-Tsb the channel consists of only one or three segments the
-				frequency step is 429kHz, 3*429 respectively. As for ISDB-T the
-				central frequency of the channel is expected.</para>
-		</section>
-
-		<section id="isdbt-bw">
-			<title><constant>DTV_BANDWIDTH_HZ</constant> (optional)</title>
-
-			<para>Possible values:</para>
-
-			<para>For ISDB-T it should be always 6000000Hz (6MHz)</para>
-			<para>For ISDB-Tsb it can vary depending on the number of connected segments</para>
-
-			<para>Note: Hardware specific values might be given here, but standard
-				applications should not bother to set a value to this field as
-				standard demods are ignoring it anyway.</para>
-
-			<para>Bandwidth in ISDB-T is fixed (6MHz) or can be easily derived from
-				other parameters (DTV_ISDBT_SB_SEGMENT_IDX,
-				DTV_ISDBT_SB_SEGMENT_COUNT).</para>
-		</section>
-
-		<section id="isdbt-delivery-sys">
-			<title><constant>DTV_DELIVERY_SYSTEM</constant></title>
-
-			<para>Possible values: <constant>SYS_ISDBT</constant></para>
-		</section>
-
-		<section id="isdbt-tx-mode">
-			<title><constant>DTV_TRANSMISSION_MODE</constant></title>
-
-			<para>ISDB-T supports three carrier/symbol-size: 8K, 4K, 2K. It is called
-				'mode' in the standard: Mode 1 is 2K, mode 2 is 4K, mode 3 is 8K</para>
-
-			<para>Possible values: <constant>TRANSMISSION_MODE_2K</constant>, <constant>TRANSMISSION_MODE_8K</constant>,
-				<constant>TRANSMISSION_MODE_AUTO</constant>, <constant>TRANSMISSION_MODE_4K</constant></para>
-
-			<para>If <constant>DTV_TRANSMISSION_MODE</constant> is set the <constant>TRANSMISSION_MODE_AUTO</constant> the
-				hardware will try to find the correct FFT-size (if capable) and will
-				use TMCC to fill in the missing parameters.</para>
-
-			<para><constant>TRANSMISSION_MODE_4K</constant> is added at the same time as the other new parameters.</para>
-		</section>
-
-		<section id="isdbt-guard-interval">
-			<title><constant>DTV_GUARD_INTERVAL</constant></title>
-
-			<para>Possible values: <constant>GUARD_INTERVAL_1_32</constant>, <constant>GUARD_INTERVAL_1_16</constant>, <constant>GUARD_INTERVAL_1_8</constant>,
-				<constant>GUARD_INTERVAL_1_4</constant>, <constant>GUARD_INTERVAL_AUTO</constant></para>
-
-			<para>If <constant>DTV_GUARD_INTERVAL</constant> is set the <constant>GUARD_INTERVAL_AUTO</constant> the hardware will
-				try to find the correct guard interval (if capable) and will use TMCC to fill
-				in the missing parameters.</para>
-		</section>
-	</section>
 	<section id="isdbt-new-parms">
 		<title>ISDB-T only parameters</title>
 
@@ -314,5 +568,20 @@
 			</section>
 		</section>
 	</section>
+	<section id="dvbt2-params">
+		<title>DVB-T2 parameters</title>
+		
+		<para>This section covers parameters that apply only to the DVB-T2 delivery method. DVB-T2
+			support is currently in the early stages development so expect this section to grow
+			and become more detailed with time.</para>
+
+		<section id="dvbt2-plp-id">
+			<title><constant>DTV_DVBT2_PLP_ID</constant></title>
+
+			<para>DVB-T2 supports Physical Layer Pipes (PLP) to allow transmission of
+				many data types via a single multiplex. The API will soon support this
+				at which point this section will be expanded.</para>
+		</section>
+	</section>
 </section>
 </section>

Documentation/DocBook/dvb/frontend.h.xml

@@ -176,14 +176,20 @@ typedef enum fe_transmit_mode {
         TRANSMISSION_MODE_2K,
         TRANSMISSION_MODE_8K,
         TRANSMISSION_MODE_AUTO,
-        TRANSMISSION_MODE_4K
+        TRANSMISSION_MODE_4K,
+        TRANSMISSION_MODE_1K,
+        TRANSMISSION_MODE_16K,
+        TRANSMISSION_MODE_32K,
 } fe_transmit_mode_t;
 
 typedef enum fe_bandwidth {
         BANDWIDTH_8_MHZ,
         BANDWIDTH_7_MHZ,
         BANDWIDTH_6_MHZ,
-        BANDWIDTH_AUTO
+        BANDWIDTH_AUTO,
+        BANDWIDTH_5_MHZ,
+        BANDWIDTH_10_MHZ,
+        BANDWIDTH_1_712_MHZ,
 } fe_bandwidth_t;
 
 
@@ -192,7 +198,10 @@ typedef enum fe_guard_interval {
         GUARD_INTERVAL_1_16,
         GUARD_INTERVAL_1_8,
         GUARD_INTERVAL_1_4,
-        GUARD_INTERVAL_AUTO
+        GUARD_INTERVAL_AUTO,
+        GUARD_INTERVAL_1_128,
+        GUARD_INTERVAL_19_128,
+        GUARD_INTERVAL_19_256,
 } fe_guard_interval_t;
 
 
@@ -306,7 +315,9 @@ struct dvb_frontend_event {
 
 #define DTV_ISDBS_TS_ID         42
 
-#define DTV_MAX_COMMAND                         DTV_ISDBS_TS_ID
+#define DTV_DVBT2_PLP_ID	43
+
+#define DTV_MAX_COMMAND                         DTV_DVBT2_PLP_ID
 
 typedef enum fe_pilot {
         PILOT_ON,
@@ -338,6 +349,7 @@ typedef enum fe_delivery_system {
         SYS_DMBTH,
         SYS_CMMB,
         SYS_DAB,
+        SYS_DVBT2,
 } fe_delivery_system_t;
 
 struct dtv_cmds_h {

Documentation/DocBook/genericirq.tmpl

@@ -191,8 +191,8 @@
 	<para>
 	Whenever an interrupt triggers, the lowlevel arch code calls into
 	the generic interrupt code by calling desc->handle_irq().
-	This highlevel IRQ handling function only uses desc->chip primitives
-	referenced by the assigned chip descriptor structure.
+	This highlevel IRQ handling function only uses desc->irq_data.chip
+	primitives referenced by the assigned chip descriptor structure.
 	</para>
     </sect1>
     <sect1 id="Highlevel_Driver_API">
@@ -206,11 +206,11 @@
 	  <listitem><para>enable_irq()</para></listitem>
 	  <listitem><para>disable_irq_nosync() (SMP only)</para></listitem>
 	  <listitem><para>synchronize_irq() (SMP only)</para></listitem>
-	  <listitem><para>set_irq_type()</para></listitem>
-	  <listitem><para>set_irq_wake()</para></listitem>
-	  <listitem><para>set_irq_data()</para></listitem>
-	  <listitem><para>set_irq_chip()</para></listitem>
-	  <listitem><para>set_irq_chip_data()</para></listitem>
+	  <listitem><para>irq_set_irq_type()</para></listitem>
+	  <listitem><para>irq_set_irq_wake()</para></listitem>
+	  <listitem><para>irq_set_handler_data()</para></listitem>
+	  <listitem><para>irq_set_chip()</para></listitem>
+	  <listitem><para>irq_set_chip_data()</para></listitem>
           </itemizedlist>
 	  See the autogenerated function documentation for details.
 	</para>
@@ -225,6 +225,8 @@
 	  <listitem><para>handle_fasteoi_irq</para></listitem>
 	  <listitem><para>handle_simple_irq</para></listitem>
 	  <listitem><para>handle_percpu_irq</para></listitem>
+	  <listitem><para>handle_edge_eoi_irq</para></listitem>
+	  <listitem><para>handle_bad_irq</para></listitem>
 	  </itemizedlist>
 	  The interrupt flow handlers (either predefined or architecture
 	  specific) are assigned to specific interrupts by the architecture
@@ -241,13 +243,13 @@
 		<programlisting>
 default_enable(struct irq_data *data)
 {
-	desc->chip->irq_unmask(data);
+	desc->irq_data.chip->irq_unmask(data);
 }
 
 default_disable(struct irq_data *data)
 {
 	if (!delay_disable(data))
-		desc->chip->irq_mask(data);
+		desc->irq_data.chip->irq_mask(data);
 }
 
 default_ack(struct irq_data *data)
@@ -284,9 +286,9 @@ noop(struct irq_data *data))
 		<para>
 		The following control flow is implemented (simplified excerpt):
 		<programlisting>
-desc->chip->irq_mask();
-handle_IRQ_event(desc->action);
-desc->chip->irq_unmask();
+desc->irq_data.chip->irq_mask_ack();
+handle_irq_event(desc->action);
+desc->irq_data.chip->irq_unmask();
 		</programlisting>
 		</para>
 	    </sect3>
@@ -300,8 +302,8 @@ desc->chip->irq_unmask();
 		<para>
 		The following control flow is implemented (simplified excerpt):
 		<programlisting>
-handle_IRQ_event(desc->action);
-desc->chip->irq_eoi();
+handle_irq_event(desc->action);
+desc->irq_data.chip->irq_eoi();
 		</programlisting>
 		</para>
 	    </sect3>
@@ -315,17 +317,17 @@ desc->chip->irq_eoi();
 		The following control flow is implemented (simplified excerpt):
 		<programlisting>
 if (desc->status &amp; running) {
-	desc->chip->irq_mask();
+	desc->irq_data.chip->irq_mask_ack();
 	desc->status |= pending | masked;
 	return;
 }
-desc->chip->irq_ack();
+desc->irq_data.chip->irq_ack();
 desc->status |= running;
 do {
 	if (desc->status &amp; masked)
-		desc->chip->irq_unmask();
+		desc->irq_data.chip->irq_unmask();
 	desc->status &amp;= ~pending;
-	handle_IRQ_event(desc->action);
+	handle_irq_event(desc->action);
 } while (status &amp; pending);
 desc->status &amp;= ~running;
 		</programlisting>
@@ -344,7 +346,7 @@ desc->status &amp;= ~running;
 		<para>
 		The following control flow is implemented (simplified excerpt):
 		<programlisting>
-handle_IRQ_event(desc->action);
+handle_irq_event(desc->action);
 		</programlisting>
 		</para>
    	    </sect3>
@@ -362,12 +364,29 @@ handle_IRQ_event(desc->action);
 		<para>
 		The following control flow is implemented (simplified excerpt):
 		<programlisting>
-handle_IRQ_event(desc->action);
-if (desc->chip->irq_eoi)
-        desc->chip->irq_eoi();
+if (desc->irq_data.chip->irq_ack)
+	desc->irq_data.chip->irq_ack();
+handle_irq_event(desc->action);
+if (desc->irq_data.chip->irq_eoi)
+        desc->irq_data.chip->irq_eoi();
 		</programlisting>
 		</para>
    	    </sect3>
+	    <sect3 id="EOI_Edge_IRQ_flow_handler">
+	 	<title>EOI Edge IRQ flow handler</title>
+		<para>
+		handle_edge_eoi_irq provides an abnomination of the edge
+		handler which is solely used to tame a badly wreckaged
+		irq controller on powerpc/cell.
+		</para>
+   	    </sect3>
+	    <sect3 id="BAD_IRQ_flow_handler">
+	 	<title>Bad IRQ flow handler</title>
+		<para>
+		handle_bad_irq is used for spurious interrupts which
+		have no real handler assigned..
+		</para>
+   	    </sect3>
 	</sect2>
 	<sect2 id="Quirks_and_optimizations">
 	<title>Quirks and optimizations</title>
@@ -410,6 +429,7 @@ if (desc->chip->irq_eoi)
 	  <listitem><para>irq_mask_ack() - Optional, recommended for performance</para></listitem>
 	  <listitem><para>irq_mask()</para></listitem>
 	  <listitem><para>irq_unmask()</para></listitem>
+	  <listitem><para>irq_eoi() - Optional, required for eoi flow handlers</para></listitem>
 	  <listitem><para>irq_retrigger() - Optional</para></listitem>
 	  <listitem><para>irq_set_type() - Optional</para></listitem>
 	  <listitem><para>irq_set_wake() - Optional</para></listitem>
@@ -424,32 +444,24 @@ if (desc->chip->irq_eoi)
   <chapter id="doirq">
      <title>__do_IRQ entry point</title>
      <para>
- 	The original implementation __do_IRQ() is an alternative entry
-	point for all types of interrupts.
+	The original implementation __do_IRQ() was an alternative entry
+	point for all types of interrupts. It not longer exists.
      </para>
      <para>
 	This handler turned out to be not suitable for all
 	interrupt hardware and was therefore reimplemented with split
-	functionality for egde/level/simple/percpu interrupts. This is not
+	functionality for edge/level/simple/percpu interrupts. This is not
 	only a functional optimization. It also shortens code paths for
 	interrupts.
       </para>
-      <para>
-	To make use of the split implementation, replace the call to
-	__do_IRQ by a call to desc->handle_irq() and associate
-        the appropriate handler function to desc->handle_irq().
-	In most cases the generic handler implementations should
-	be sufficient.
-     </para>
   </chapter>
 
   <chapter id="locking">
      <title>Locking on SMP</title>
      <para>
 	The locking of chip registers is up to the architecture that
-	defines the chip primitives. There is a chip->lock field that can be used
-	for serialization, but the generic layer does not touch it. The per-irq
-	structure is protected via desc->lock, by the generic layer.
+	defines the chip primitives. The per-irq structure is
+	protected via desc->lock, by the generic layer.
      </para>
   </chapter>
   <chapter id="structs">

Documentation/DocBook/media-entities.tmpl

@@ -270,6 +270,7 @@
 <!ENTITY sub-write SYSTEM "v4l/func-write.xml">
 <!ENTITY sub-io SYSTEM "v4l/io.xml">
 <!ENTITY sub-grey SYSTEM "v4l/pixfmt-grey.xml">
+<!ENTITY sub-m420 SYSTEM "v4l/pixfmt-m420.xml">
 <!ENTITY sub-nv12 SYSTEM "v4l/pixfmt-nv12.xml">
 <!ENTITY sub-nv12m SYSTEM "v4l/pixfmt-nv12m.xml">
 <!ENTITY sub-nv12mt SYSTEM "v4l/pixfmt-nv12mt.xml">
@@ -295,6 +296,7 @@
 <!ENTITY sub-srggb8 SYSTEM "v4l/pixfmt-srggb8.xml">
 <!ENTITY sub-y10 SYSTEM "v4l/pixfmt-y10.xml">
 <!ENTITY sub-y12 SYSTEM "v4l/pixfmt-y12.xml">
+<!ENTITY sub-y10b SYSTEM "v4l/pixfmt-y10b.xml">
 <!ENTITY sub-pixfmt SYSTEM "v4l/pixfmt.xml">
 <!ENTITY sub-cropcap SYSTEM "v4l/vidioc-cropcap.xml">
 <!ENTITY sub-dbg-g-register SYSTEM "v4l/vidioc-dbg-g-register.xml">

Documentation/DocBook/v4l/pixfmt-m420.xml

+    <refentry id="V4L2-PIX-FMT-M420">
+      <refmeta>
+	<refentrytitle>V4L2_PIX_FMT_M420 ('M420')</refentrytitle>
+	&manvol;
+      </refmeta>
+      <refnamediv>
+	<refname><constant>V4L2_PIX_FMT_M420</constant></refname>
+	<refpurpose>Format with &frac12; horizontal and vertical chroma
+	resolution, also known as YUV 4:2:0. Hybrid plane line-interleaved
+	layout.</refpurpose>
+      </refnamediv>
+      <refsect1>
+	<title>Description</title>
+
+	<para>M420 is a YUV format with &frac12; horizontal and vertical chroma
+	subsampling (YUV 4:2:0). Pixels are organized as interleaved luma and
+	chroma planes. Two lines of luma data are followed by one line of chroma
+	data.</para>
+	<para>The luma plane has one byte per pixel. The chroma plane contains
+	interleaved CbCr pixels subsampled by &frac12; in the horizontal and
+	vertical directions. Each CbCr pair belongs to four pixels. For example,
+Cb<subscript>0</subscript>/Cr<subscript>0</subscript> belongs to
+Y'<subscript>00</subscript>, Y'<subscript>01</subscript>,
+Y'<subscript>10</subscript>, Y'<subscript>11</subscript>.</para>
+
+	<para>All line lengths are identical: if the Y lines include pad bytes
+	so do the CbCr lines.</para>
+
+	<example>
+	  <title><constant>V4L2_PIX_FMT_M420</constant> 4 &times; 4
+pixel image</title>
+
+	  <formalpara>
+	    <title>Byte Order.</title>
+	    <para>Each cell is one byte.
+		<informaltable frame="none">
+		<tgroup cols="5" align="center">
+		  <colspec align="left" colwidth="2*" />
+		  <tbody valign="top">
+		    <row>
+		      <entry>start&nbsp;+&nbsp;0:</entry>
+		      <entry>Y'<subscript>00</subscript></entry>
+		      <entry>Y'<subscript>01</subscript></entry>
+		      <entry>Y'<subscript>02</subscript></entry>
+		      <entry>Y'<subscript>03</subscript></entry>
+		    </row>
+		    <row>
+		      <entry>start&nbsp;+&nbsp;4:</entry>
+		      <entry>Y'<subscript>10</subscript></entry>
+		      <entry>Y'<subscript>11</subscript></entry>
+		      <entry>Y'<subscript>12</subscript></entry>
+		      <entry>Y'<subscript>13</subscript></entry>
+		    </row>
+		    <row>
+		      <entry>start&nbsp;+&nbsp;8:</entry>
+		      <entry>Cb<subscript>00</subscript></entry>
+		      <entry>Cr<subscript>00</subscript></entry>
+		      <entry>Cb<subscript>01</subscript></entry>
+		      <entry>Cr<subscript>01</subscript></entry>
+		    </row>
+		    <row>
+		      <entry>start&nbsp;+&nbsp;16:</entry>
+		      <entry>Y'<subscript>20</subscript></entry>
+		      <entry>Y'<subscript>21</subscript></entry>
+		      <entry>Y'<subscript>22</subscript></entry>
+		      <entry>Y'<subscript>23</subscript></entry>
+		    </row>
+		    <row>
+		      <entry>start&nbsp;+&nbsp;20:</entry>
+		      <entry>Y'<subscript>30</subscript></entry>
+		      <entry>Y'<subscript>31</subscript></entry>
+		      <entry>Y'<subscript>32</subscript></entry>
+		      <entry>Y'<subscript>33</subscript></entry>
+		    </row>
+		    <row>
+		      <entry>start&nbsp;+&nbsp;24:</entry>
+		      <entry>Cb<subscript>10</subscript></entry>
+		      <entry>Cr<subscript>10</subscript></entry>
+		      <entry>Cb<subscript>11</subscript></entry>
+		      <entry>Cr<subscript>11</subscript></entry>
+		    </row>
+		  </tbody>
+		</tgroup>
+		</informaltable>
+	      </para>
+	  </formalpara>
+
+	  <formalpara>
+	    <title>Color Sample Location.</title>
+	    <para>
+		<informaltable frame="none">
+		<tgroup cols="7" align="center">
+		  <tbody valign="top">
+		    <row>
+		      <entry></entry>
+		      <entry>0</entry><entry></entry><entry>1</entry><entry></entry>
+		      <entry>2</entry><entry></entry><entry>3</entry>
+		    </row>
+		    <row>
+		      <entry>0</entry>
+		      <entry>Y</entry><entry></entry><entry>Y</entry><entry></entry>
+		      <entry>Y</entry><entry></entry><entry>Y</entry>
+		    </row>
+		    <row>
+		      <entry></entry>
+		      <entry></entry><entry>C</entry><entry></entry><entry></entry>
+		      <entry></entry><entry>C</entry><entry></entry>
+		    </row>
+		    <row>
+		      <entry>1</entry>
+		      <entry>Y</entry><entry></entry><entry>Y</entry><entry></entry>
+		      <entry>Y</entry><entry></entry><entry>Y</entry>
+		    </row>
+		    <row>
+		      <entry></entry>
+		    </row>
+		    <row>
+		      <entry>2</entry>
+		      <entry>Y</entry><entry></entry><entry>Y</entry><entry></entry>
+		      <entry>Y</entry><entry></entry><entry>Y</entry>
+		    </row>
+		    <row>
+		      <entry></entry>
+		      <entry></entry><entry>C</entry><entry></entry><entry></entry>
+		      <entry></entry><entry>C</entry><entry></entry>
+		    </row>
+		    <row>
+		      <entry>3</entry>
+		      <entry>Y</entry><entry></entry><entry>Y</entry><entry></entry>
+		      <entry>Y</entry><entry></entry><entry>Y</entry>
+		    </row>
+		  </tbody>
+		</tgroup>
+		</informaltable>
+	      </para>
+	  </formalpara>
+	</example>
+      </refsect1>
+    </refentry>
+
+  <!--
+Local Variables:
+mode: sgml
+sgml-parent-document: "pixfmt.sgml"
+indent-tabs-mode: nil
+End:
+  -->

Documentation/DocBook/v4l/pixfmt-y10b.xml

+<refentry id="V4L2-PIX-FMT-Y10BPACK">
+  <refmeta>
+    <refentrytitle>V4L2_PIX_FMT_Y10BPACK ('Y10B')</refentrytitle>
+    &manvol;
+  </refmeta>
+  <refnamediv>
+    <refname><constant>V4L2_PIX_FMT_Y10BPACK</constant></refname>
+    <refpurpose>Grey-scale image as a bit-packed array</refpurpose>
+  </refnamediv>
+  <refsect1>
+    <title>Description</title>
+
+    <para>This is a packed grey-scale image format with a depth of 10 bits per
+      pixel. Pixels are stored in a bit-packed array of 10bit bits per pixel,
+      with no padding between them and with the most significant bits coming
+      first from the left.</para>
+
+    <example>
+      <title><constant>V4L2_PIX_FMT_Y10BPACK</constant> 4 pixel data stream taking 5 bytes</title>
+
+      <formalpara>
+	<title>Bit-packed representation</title>
+	<para>pixels cross the byte boundary and have a ratio of 5 bytes for each 4
+          pixels.
+	  <informaltable frame="all">
+	    <tgroup cols="5" align="center">
+	      <colspec align="left" colwidth="2*" />
+	      <tbody valign="top">
+		<row>
+		  <entry>Y'<subscript>00[9:2]</subscript></entry>
+		  <entry>Y'<subscript>00[1:0]</subscript>Y'<subscript>01[9:4]</subscript></entry>
+		  <entry>Y'<subscript>01[3:0]</subscript>Y'<subscript>02[9:6]</subscript></entry>
+		  <entry>Y'<subscript>02[5:0]</subscript>Y'<subscript>03[9:8]</subscript></entry>
+		  <entry>Y'<subscript>03[7:0]</subscript></entry>
+		</row>
+	      </tbody>
+	    </tgroup>
+	  </informaltable>
+	</para>
+      </formalpara>
+    </example>
+  </refsect1>
+</refentry>

Documentation/DocBook/v4l/pixfmt.xml

@@ -697,6 +697,7 @@ information.</para>
     &sub-grey;
     &sub-y10;
     &sub-y12;
+    &sub-y10b;
     &sub-y16;
     &sub-yuyv;
     &sub-uyvy;
@@ -712,6 +713,7 @@ information.</para>
     &sub-nv12m;
     &sub-nv12mt;
     &sub-nv16;
+    &sub-m420;
   </section>
 
   <section>

Documentation/DocBook/v4l/subdev-formats.xml

@@ -2522,5 +2522,51 @@
 	</tgroup>
       </table>
     </section>
+
+    <section>
+      <title>JPEG Compressed Formats</title>
+
+      <para>Those data formats consist of an ordered sequence of 8-bit bytes
+	obtained from JPEG compression process. Additionally to the
+	<constant>_JPEG</constant> prefix the format code is made of
+	the following information.
+	<itemizedlist>
+	  <listitem>The number of bus samples per entropy encoded byte.</listitem>
+	  <listitem>The bus width.</listitem>
+	</itemizedlist>
+
+	<para>For instance, for a JPEG baseline process and an 8-bit bus width
+	  the format will be named <constant>V4L2_MBUS_FMT_JPEG_1X8</constant>.
+	</para>
+      </para>
+
+      <para>The following table lists existing JPEG compressed formats.</para>
+
+      <table pgwide="0" frame="none" id="v4l2-mbus-pixelcode-jpeg">
+	<title>JPEG Formats</title>
+	<tgroup cols="3">
+	  <colspec colname="id" align="left" />
+	  <colspec colname="code" align="left"/>
+	  <colspec colname="remarks" align="left"/>
+	  <thead>
+	    <row>
+	      <entry>Identifier</entry>
+	      <entry>Code</entry>
+	      <entry>Remarks</entry>
+	    </row>
+	  </thead>
+	  <tbody valign="top">
+	    <row id="V4L2-MBUS-FMT-JPEG-1X8">
+	      <entry>V4L2_MBUS_FMT_JPEG_1X8</entry>
+	      <entry>0x4001</entry>
+	      <entry>Besides of its usage for the parallel bus this format is
+		recommended for transmission of JPEG data over MIPI CSI bus
+		using the User Defined 8-bit Data types.
+	      </entry>
+	    </row>
+	  </tbody>
+	</tgroup>
+      </table>
+    </section>
   </section>
 </section>

Documentation/DocBook/v4l/videodev2.h.xml

@@ -311,6 +311,9 @@ struct <link linkend="v4l2-pix-format">v4l2_pix_format</link> {
 #define <link linkend="V4L2-PIX-FMT-Y10">V4L2_PIX_FMT_Y10</link>     v4l2_fourcc('Y', '1', '0', ' ') /* 10  Greyscale     */
 #define <link linkend="V4L2-PIX-FMT-Y16">V4L2_PIX_FMT_Y16</link>     v4l2_fourcc('Y', '1', '6', ' ') /* 16  Greyscale     */
 
+/* Grey bit-packed formats */
+#define <link linkend="V4L2-PIX-FMT-Y10BPACK">V4L2_PIX_FMT_Y10BPACK</link>    v4l2_fourcc('Y', '1', '0', 'B') /* 10  Greyscale bit-packed */
+
 /* Palette formats */
 #define <link linkend="V4L2-PIX-FMT-PAL8">V4L2_PIX_FMT_PAL8</link>    v4l2_fourcc('P', 'A', 'L', '8') /*  8  8-bit palette */
 
@@ -333,6 +336,7 @@ struct <link linkend="v4l2-pix-format">v4l2_pix_format</link> {
 #define <link linkend="V4L2-PIX-FMT-YUV420">V4L2_PIX_FMT_YUV420</link>  v4l2_fourcc('Y', 'U', '1', '2') /* 12  YUV 4:2:0     */
 #define <link linkend="V4L2-PIX-FMT-HI240">V4L2_PIX_FMT_HI240</link>   v4l2_fourcc('H', 'I', '2', '4') /*  8  8-bit color   */
 #define <link linkend="V4L2-PIX-FMT-HM12">V4L2_PIX_FMT_HM12</link>    v4l2_fourcc('H', 'M', '1', '2') /*  8  YUV 4:2:0 16x16 macroblocks */
+#define <link linkend="V4L2-PIX-FMT-M420">V4L2_PIX_FMT_M420</link>    v4l2_fourcc('M', '4', '2', '0') /* 12  YUV 4:2:0 2 lines y, 1 line uv interleaved */
 
 /* two planes -- one Y, one Cr + Cb interleaved  */
 #define <link linkend="V4L2-PIX-FMT-NV12">V4L2_PIX_FMT_NV12</link>    v4l2_fourcc('N', 'V', '1', '2') /* 12  Y/CbCr 4:2:0  */

Documentation/HOWTO

@@ -209,7 +209,7 @@ tools.  One such tool that is particularly recommended is the Linux
 Cross-Reference project, which is able to present source code in a
 self-referential, indexed webpage format. An excellent up-to-date
 repository of the kernel code may be found at:
-	http://users.sosdg.org/~qiyong/lxr/
+	http://lxr.linux.no/+trees
 
 
 The development process

Documentation/RCU/00-INDEX

@@ -21,7 +21,7 @@ rcu.txt
 RTFP.txt
 	- List of RCU papers (bibliography) going back to 1980.
 stallwarn.txt
-	- RCU CPU stall warnings (CONFIG_RCU_CPU_STALL_DETECTOR)
+	- RCU CPU stall warnings (module parameter rcu_cpu_stall_suppress)
 torture.txt
 	- RCU Torture Test Operation (CONFIG_RCU_TORTURE_TEST)
 trace.txt

Documentation/RCU/stallwarn.txt

 Using RCU's CPU Stall Detector
 
-The CONFIG_RCU_CPU_STALL_DETECTOR kernel config parameter enables
-RCU's CPU stall detector, which detects conditions that unduly delay
-RCU grace periods.  The stall detector's idea of what constitutes
-"unduly delayed" is controlled by a set of C preprocessor macros:
+The rcu_cpu_stall_suppress module parameter enables RCU's CPU stall
+detector, which detects conditions that unduly delay RCU grace periods.
+This module parameter enables CPU stall detection by default, but
+may be overridden via boot-time parameter or at runtime via sysfs.
+The stall detector's idea of what constitutes "unduly delayed" is
+controlled by a set of kernel configuration variables and cpp macros:
 
-RCU_SECONDS_TILL_STALL_CHECK
+CONFIG_RCU_CPU_STALL_TIMEOUT
 
-	This macro defines the period of time that RCU will wait from
-	the beginning of a grace period until it issues an RCU CPU
-	stall warning.	This time period is normally ten seconds.
+	This kernel configuration parameter defines the period of time
+	that RCU will wait from the beginning of a grace period until it
+	issues an RCU CPU stall warning.  This time period is normally
+	ten seconds.
 
 RCU_SECONDS_TILL_STALL_RECHECK
 
 	This macro defines the period of time that RCU will wait after
 	issuing a stall warning until it issues another stall warning
-	for the same stall.  This time period is normally set to thirty
-	seconds.
+	for the same stall.  This time period is normally set to three
+	times the check interval plus thirty seconds.
 
 RCU_STALL_RAT_DELAY
 

Documentation/RCU/trace.txt

@@ -10,34 +10,46 @@ for rcutree and next for rcutiny.
 
 CONFIG_TREE_RCU and CONFIG_TREE_PREEMPT_RCU debugfs Files and Formats
 
-These implementations of RCU provides five debugfs files under the
-top-level directory RCU: rcu/rcudata (which displays fields in struct
-rcu_data), rcu/rcudata.csv (which is a .csv spreadsheet version of
-rcu/rcudata), rcu/rcugp (which displays grace-period counters),
-rcu/rcuhier (which displays the struct rcu_node hierarchy), and
-rcu/rcu_pending (which displays counts of the reasons that the
-rcu_pending() function decided that there was core RCU work to do).
+These implementations of RCU provides several debugfs files under the
+top-level directory "rcu":
+
+rcu/rcudata:
+	Displays fields in struct rcu_data.
+rcu/rcudata.csv:
+	Comma-separated values spreadsheet version of rcudata.
+rcu/rcugp:
+	Displays grace-period counters.
+rcu/rcuhier:
+	Displays the struct rcu_node hierarchy.
+rcu/rcu_pending:
+	Displays counts of the reasons rcu_pending() decided that RCU had
+	work to do.
+rcu/rcutorture:
+	Displays rcutorture test progress.
+rcu/rcuboost:
+	Displays RCU boosting statistics.  Only present if
+	CONFIG_RCU_BOOST=y.
 
 The output of "cat rcu/rcudata" looks as follows:
 
 rcu_sched:
-  0 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=10951/1 dn=0 df=1101 of=0 ri=36 ql=0 b=10
-  1 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=16117/1 dn=0 df=1015 of=0 ri=0 ql=0 b=10
-  2 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=1445/1 dn=0 df=1839 of=0 ri=0 ql=0 b=10
-  3 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=6681/1 dn=0 df=1545 of=0 ri=0 ql=0 b=10
-  4 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=1003/1 dn=0 df=1992 of=0 ri=0 ql=0 b=10
-  5 c=17829 g=17830 pq=1 pqc=17829 qp=1 dt=3887/1 dn=0 df=3331 of=0 ri=4 ql=2 b=10
-  6 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=859/1 dn=0 df=3224 of=0 ri=0 ql=0 b=10
-  7 c=17829 g=17830 pq=0 pqc=17829 qp=1 dt=3761/1 dn=0 df=1818 of=0 ri=0 ql=2 b=10
+  0 c=20972 g=20973 pq=1 pqc=20972 qp=0 dt=545/1/0 df=50 of=0 ri=0 ql=163 qs=NRW. kt=0/W/0 ktl=ebc3 b=10 ci=153737 co=0 ca=0
+  1 c=20972 g=20973 pq=1 pqc=20972 qp=0 dt=967/1/0 df=58 of=0 ri=0 ql=634 qs=NRW. kt=0/W/1 ktl=58c b=10 ci=191037 co=0 ca=0
+  2 c=20972 g=20973 pq=1 pqc=20972 qp=0 dt=1081/1/0 df=175 of=0 ri=0 ql=74 qs=N.W. kt=0/W/2 ktl=da94 b=10 ci=75991 co=0 ca=0
+  3 c=20942 g=20943 pq=1 pqc=20942 qp=1 dt=1846/0/0 df=404 of=0 ri=0 ql=0 qs=.... kt=0/W/3 ktl=d1cd b=10 ci=72261 co=0 ca=0
+  4 c=20972 g=20973 pq=1 pqc=20972 qp=0 dt=369/1/0 df=83 of=0 ri=0 ql=48 qs=N.W. kt=0/W/4 ktl=e0e7 b=10 ci=128365 co=0 ca=0
+  5 c=20972 g=20973 pq=1 pqc=20972 qp=0 dt=381/1/0 df=64 of=0 ri=0 ql=169 qs=NRW. kt=0/W/5 ktl=fb2f b=10 ci=164360 co=0 ca=0
+  6 c=20972 g=20973 pq=1 pqc=20972 qp=0 dt=1037/1/0 df=183 of=0 ri=0 ql=62 qs=N.W. kt=0/W/6 ktl=d2ad b=10 ci=65663 co=0 ca=0
+  7 c=20897 g=20897 pq=1 pqc=20896 qp=0 dt=1572/0/0 df=382 of=0 ri=0 ql=0 qs=.... kt=0/W/7 ktl=cf15 b=10 ci=75006 co=0 ca=0
 rcu_bh:
-  0 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=10951/1 dn=0 df=0 of=0 ri=0 ql=0 b=10
-  1 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=16117/1 dn=0 df=13 of=0 ri=0 ql=0 b=10
-  2 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=1445/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
-  3 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=6681/1 dn=0 df=9 of=0 ri=0 ql=0 b=10
-  4 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=1003/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
-  5 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=3887/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
-  6 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=859/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
-  7 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=3761/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
+  0 c=1480 g=1480 pq=1 pqc=1479 qp=0 dt=545/1/0 df=6 of=0 ri=1 ql=0 qs=.... kt=0/W/0 ktl=ebc3 b=10 ci=0 co=0 ca=0
+  1 c=1480 g=1480 pq=1 pqc=1479 qp=0 dt=967/1/0 df=3 of=0 ri=1 ql=0 qs=.... kt=0/W/1 ktl=58c b=10 ci=151 co=0 ca=0
+  2 c=1480 g=1480 pq=1 pqc=1479 qp=0 dt=1081/1/0 df=6 of=0 ri=1 ql=0 qs=.... kt=0/W/2 ktl=da94 b=10 ci=0 co=0 ca=0
+  3 c=1480 g=1480 pq=1 pqc=1479 qp=0 dt=1846/0/0 df=8 of=0 ri=1 ql=0 qs=.... kt=0/W/3 ktl=d1cd b=10 ci=0 co=0 ca=0
+  4 c=1480 g=1480 pq=1 pqc=1479 qp=0 dt=369/1/0 df=6 of=0 ri=1 ql=0 qs=.... kt=0/W/4 ktl=e0e7 b=10 ci=0 co=0 ca=0
+  5 c=1480 g=1480 pq=1 pqc=1479 qp=0 dt=381/1/0 df=4 of=0 ri=1 ql=0 qs=.... kt=0/W/5 ktl=fb2f b=10 ci=0 co=0 ca=0
+  6 c=1480 g=1480 pq=1 pqc=1479 qp=0 dt=1037/1/0 df=6 of=0 ri=1 ql=0 qs=.... kt=0/W/6 ktl=d2ad b=10 ci=0 co=0 ca=0
+  7 c=1474 g=1474 pq=1 pqc=1473 qp=0 dt=1572/0/0 df=8 of=0 ri=1 ql=0 qs=.... kt=0/W/7 ktl=cf15 b=10 ci=0 co=0 ca=0
 
 The first section lists the rcu_data structures for rcu_sched, the second
 for rcu_bh.  Note that CONFIG_TREE_PREEMPT_RCU kernels will have an
@@ -52,17 +64,18 @@ o	The number at the beginning of each line is the CPU number.
 	substantially larger than the number of actual CPUs.
 
 o	"c" is the count of grace periods that this CPU believes have
-	completed.  CPUs in dynticks idle mode may lag quite a ways
-	behind, for example, CPU 4 under "rcu_sched" above, which has
-	slept through the past 25 RCU grace periods.  It is not unusual
-	to see CPUs lagging by thousands of grace periods.
+	completed.  Offlined CPUs and CPUs in dynticks idle mode may
+	lag quite a ways behind, for example, CPU 6 under "rcu_sched"
+	above, which has been offline through not quite 40,000 RCU grace
+	periods.  It is not unusual to see CPUs lagging by thousands of
+	grace periods.
 
 o	"g" is the count of grace periods that this CPU believes have
-	started.  Again, CPUs in dynticks idle mode may lag behind.
-	If the "c" and "g" values are equal, this CPU has already
-	reported a quiescent state for the last RCU grace period that
-	it is aware of, otherwise, the CPU believes that it owes RCU a
-	quiescent state.
+	started.  Again, offlined CPUs and CPUs in dynticks idle mode
+	may lag behind.  If the "c" and "g" values are equal, this CPU
+	has already reported a quiescent state for the last RCU grace
+	period that it is aware of, otherwise, the CPU believes that it
+	owes RCU a quiescent state.
 
 o	"pq" indicates that this CPU has passed through a quiescent state
 	for the current grace period.  It is possible for "pq" to be
@@ -81,7 +94,8 @@ o	"pqc" indicates which grace period the last-observed quiescent
 	the next grace period!
 
 o	"qp" indicates that RCU still expects a quiescent state from
-	this CPU.
+	this CPU.  Offlined CPUs and CPUs in dyntick idle mode might
+	well have qp=1, which is OK: RCU is still ignoring them.
 
 o	"dt" is the current value of the dyntick counter that is incremented
 	when entering or leaving dynticks idle state, either by the
@@ -108,7 +122,7 @@ o	"df" is the number of times that some other CPU has forced a
 
 o	"of" is the number of times that some other CPU has forced a
 	quiescent state on behalf of this CPU due to this CPU being
-	offline.  In a perfect world, this might neve happen, but it
+	offline.  In a perfect world, this might never happen, but it
 	turns out that offlining and onlining a CPU can take several grace
 	periods, and so there is likely to be an extended period of time
 	when RCU believes that the CPU is online when it really is not.
@@ -125,6 +139,62 @@ o	"ql" is the number of RCU callbacks currently residing on
 	of what state they are in (new, waiting for grace period to
 	start, waiting for grace period to end, ready to invoke).
 
+o	"qs" gives an indication of the state of the callback queue
+	with four characters:
+
+	"N"	Indicates that there are callbacks queued that are not
+		ready to be handled by the next grace period, and thus
+		will be handled by the grace period following the next
+		one.
+
+	"R"	Indicates that there are callbacks queued that are
+		ready to be handled by the next grace period.
+
+	"W"	Indicates that there are callbacks queued that are
+		waiting on the current grace period.
+
+	"D"	Indicates that there are callbacks queued that have
+		already been handled by a prior grace period, and are
+		thus waiting to be invoked.  Note that callbacks in
+		the process of being invoked are not counted here.
+		Callbacks in the process of being invoked are those
+		that have been removed from the rcu_data structures
+		queues by rcu_do_batch(), but which have not yet been
+		invoked.
+
+	If there are no callbacks in a given one of the above states,
+	the corresponding character is replaced by ".".
+
+o	"kt" is the per-CPU kernel-thread state.  The digit preceding
+	the first slash is zero if there is no work pending and 1
+	otherwise.  The character between the first pair of slashes is
+	as follows:
+
+	"S"	The kernel thread is stopped, in other words, all
+		CPUs corresponding to this rcu_node structure are
+		offline.
+
+	"R"	The kernel thread is running.
+
+	"W"	The kernel thread is waiting because there is no work
+		for it to do.
+
+	"O"	The kernel thread is waiting because it has been
+		forced off of its designated CPU or because its
+		->cpus_allowed mask permits it to run on other than
+		its designated CPU.
+
+	"Y"	The kernel thread is yielding to avoid hogging CPU.
+
+	"?"	Unknown value, indicates a bug.
+
+	The number after the final slash is the CPU that the kthread
+	is actually running on.
+
+o	"ktl" is the low-order 16 bits (in hexadecimal) of the count of
+	the number of times that this CPU's per-CPU kthread has gone
+	through its loop servicing invoke_rcu_cpu_kthread() requests.
+
 o	"b" is the batch limit for this CPU.  If more than this number
 	of RCU callbacks is ready to invoke, then the remainder will
 	be deferred.
@@ -174,14 +244,14 @@ o	"gpnum" is the number of grace periods that have started.  It is
 The output of "cat rcu/rcuhier" looks as follows, with very long lines:
 
 c=6902 g=6903 s=2 jfq=3 j=72c7 nfqs=13142/nfqsng=0(13142) fqlh=6
-1/1 .>. 0:127 ^0    
-3/3 .>. 0:35 ^0    0/0 .>. 36:71 ^1    0/0 .>. 72:107 ^2    0/0 .>. 108:127 ^3    
-3/3f .>. 0:5 ^0    2/3 .>. 6:11 ^1    0/0 .>. 12:17 ^2    0/0 .>. 18:23 ^3    0/0 .>. 24:29 ^4    0/0 .>. 30:35 ^5    0/0 .>. 36:41 ^0    0/0 .>. 42:47 ^1    0/0 .>. 48:53 ^2    0/0 .>. 54:59 ^3    0/0 .>. 60:65 ^4    0/0 .>. 66:71 ^5    0/0 .>. 72:77 ^0    0/0 .>. 78:83 ^1    0/0 .>. 84:89 ^2    0/0 .>. 90:95 ^3    0/0 .>. 96:101 ^4    0/0 .>. 102:107 ^5    0/0 .>. 108:113 ^0    0/0 .>. 114:119 ^1    0/0 .>. 120:125 ^2    0/0 .>. 126:127 ^3    
+1/1 ..>. 0:127 ^0
+3/3 ..>. 0:35 ^0    0/0 ..>. 36:71 ^1    0/0 ..>. 72:107 ^2    0/0 ..>. 108:127 ^3
+3/3f ..>. 0:5 ^0    2/3 ..>. 6:11 ^1    0/0 ..>. 12:17 ^2    0/0 ..>. 18:23 ^3    0/0 ..>. 24:29 ^4    0/0 ..>. 30:35 ^5    0/0 ..>. 36:41 ^0    0/0 ..>. 42:47 ^1    0/0 ..>. 48:53 ^2    0/0 ..>. 54:59 ^3    0/0 ..>. 60:65 ^4    0/0 ..>. 66:71 ^5    0/0 ..>. 72:77 ^0    0/0 ..>. 78:83 ^1    0/0 ..>. 84:89 ^2    0/0 ..>. 90:95 ^3    0/0 ..>. 96:101 ^4    0/0 ..>. 102:107 ^5    0/0 ..>. 108:113 ^0    0/0 ..>. 114:119 ^1    0/0 ..>. 120:125 ^2    0/0 ..>. 126:127 ^3
 rcu_bh:
 c=-226 g=-226 s=1 jfq=-5701 j=72c7 nfqs=88/nfqsng=0(88) fqlh=0
-0/1 .>. 0:127 ^0    
-0/3 .>. 0:35 ^0    0/0 .>. 36:71 ^1    0/0 .>. 72:107 ^2    0/0 .>. 108:127 ^3    
-0/3f .>. 0:5 ^0    0/3 .>. 6:11 ^1    0/0 .>. 12:17 ^2    0/0 .>. 18:23 ^3    0/0 .>. 24:29 ^4    0/0 .>. 30:35 ^5    0/0 .>. 36:41 ^0    0/0 .>. 42:47 ^1    0/0 .>. 48:53 ^2    0/0 .>. 54:59 ^3    0/0 .>. 60:65 ^4    0/0 .>. 66:71 ^5    0/0 .>. 72:77 ^0    0/0 .>. 78:83 ^1    0/0 .>. 84:89 ^2    0/0 .>. 90:95 ^3    0/0 .>. 96:101 ^4    0/0 .>. 102:107 ^5    0/0 .>. 108:113 ^0    0/0 .>. 114:119 ^1    0/0 .>. 120:125 ^2    0/0 .>. 126:127 ^3
+0/1 ..>. 0:127 ^0
+0/3 ..>. 0:35 ^0    0/0 ..>. 36:71 ^1    0/0 ..>. 72:107 ^2    0/0 ..>. 108:127 ^3
+0/3f ..>. 0:5 ^0    0/3 ..>. 6:11 ^1    0/0 ..>. 12:17 ^2    0/0 ..>. 18:23 ^3    0/0 ..>. 24:29 ^4    0/0 ..>. 30:35 ^5    0/0 ..>. 36:41 ^0    0/0 ..>. 42:47 ^1    0/0 ..>. 48:53 ^2    0/0 ..>. 54:59 ^3    0/0 ..>. 60:65 ^4    0/0 ..>. 66:71 ^5    0/0 ..>. 72:77 ^0    0/0 ..>. 78:83 ^1    0/0 ..>. 84:89 ^2    0/0 ..>. 90:95 ^3    0/0 ..>. 96:101 ^4    0/0 ..>. 102:107 ^5    0/0 ..>. 108:113 ^0    0/0 ..>. 114:119 ^1    0/0 ..>. 120:125 ^2    0/0 ..>. 126:127 ^3
 
 This is once again split into "rcu_sched" and "rcu_bh" portions,
 and CONFIG_TREE_PREEMPT_RCU kernels will again have an additional
@@ -240,13 +310,20 @@ o	Each element of the form "1/1 0:127 ^0" represents one struct
 		current grace period.
 
 	o	The characters separated by the ">" indicate the state
-		of the blocked-tasks lists.  A "T" preceding the ">"
+		of the blocked-tasks lists.  A "G" preceding the ">"
 		indicates that at least one task blocked in an RCU
 		read-side critical section blocks the current grace
-		period, while a "." preceding the ">" indicates otherwise.
-		The character following the ">" indicates similarly for
-		the next grace period.  A "T" should appear in this
-		field only for rcu-preempt.
+		period, while a "E" preceding the ">" indicates that
+		at least one task blocked in an RCU read-side critical
+		section blocks the current expedited grace period.
+		A "T" character following the ">" indicates that at
+		least one task is blocked within an RCU read-side
+		critical section, regardless of whether any current
+		grace period (expedited or normal) is inconvenienced.
+		A "." character appears if the corresponding condition
+		does not hold, so that "..>." indicates that no tasks
+		are blocked.  In contrast, "GE>T" indicates maximal
+		inconvenience from blocked tasks.
 
 	o	The numbers separated by the ":" are the range of CPUs
 		served by this struct rcu_node.  This can be helpful
@@ -328,6 +405,113 @@ o	"nn" is the number of times that this CPU needed nothing.  Alert
 	is due to short-circuit evaluation in rcu_pending().
 
 
+The output of "cat rcu/rcutorture" looks as follows:
+
+rcutorture test sequence: 0 (test in progress)
+rcutorture update version number: 615
+
+The first line shows the number of rcutorture tests that have completed
+since boot.  If a test is currently running, the "(test in progress)"
+string will appear as shown above.  The second line shows the number of
+update cycles that the current test has started, or zero if there is
+no test in progress.
+
+
+The output of "cat rcu/rcuboost" looks as follows:
+
+0:5 tasks=.... kt=W ntb=0 neb=0 nnb=0 j=2f95 bt=300f
+     balk: nt=0 egt=989 bt=0 nb=0 ny=0 nos=16
+6:7 tasks=.... kt=W ntb=0 neb=0 nnb=0 j=2f95 bt=300f
+     balk: nt=0 egt=225 bt=0 nb=0 ny=0 nos=6
+
+This information is output only for rcu_preempt.  Each two-line entry
+corresponds to a leaf rcu_node strcuture.  The fields are as follows:
+
+o	"n:m" is the CPU-number range for the corresponding two-line
+	entry.  In the sample output above, the first entry covers
+	CPUs zero through five and the second entry covers CPUs 6
+	and 7.
+
+o	"tasks=TNEB" gives the state of the various segments of the
+	rnp->blocked_tasks list:
+
+	"T"	This indicates that there are some tasks that blocked
+		while running on one of the corresponding CPUs while
+		in an RCU read-side critical section.
+
+	"N"	This indicates that some of the blocked tasks are preventing
+		the current normal (non-expedited) grace period from
+		completing.
+
+	"E"	This indicates that some of the blocked tasks are preventing
+		the current expedited grace period from completing.
+
+	"B"	This indicates that some of the blocked tasks are in
+		need of RCU priority boosting.
+
+	Each character is replaced with "." if the corresponding
+	condition does not hold.
+
+o	"kt" is the state of the RCU priority-boosting kernel
+	thread associated with the corresponding rcu_node structure.
+	The state can be one of the following:
+
+	"S"	The kernel thread is stopped, in other words, all
+		CPUs corresponding to this rcu_node structure are
+		offline.
+
+	"R"	The kernel thread is running.
+
+	"W"	The kernel thread is waiting because there is no work
+		for it to do.
+
+	"Y"	The kernel thread is yielding to avoid hogging CPU.
+
+	"?"	Unknown value, indicates a bug.
+
+o	"ntb" is the number of tasks boosted.
+
+o	"neb" is the number of tasks boosted in order to complete an
+	expedited grace period.
+
+o	"nnb" is the number of tasks boosted in order to complete a
+	normal (non-expedited) grace period.  When boosting a task
+	that was blocking both an expedited and a normal grace period,
+	it is counted against the expedited total above.
+
+o	"j" is the low-order 16 bits of the jiffies counter in
+	hexadecimal.
+
+o	"bt" is the low-order 16 bits of the value that the jiffies
+	counter will have when we next start boosting, assuming that
+	the current grace period does not end beforehand.  This is
+	also in hexadecimal.
+
+o	"balk: nt" counts the number of times we didn't boost (in
+	other words, we balked) even though it was time to boost because
+	there were no blocked tasks to boost.  This situation occurs
+	when there is one blocked task on one rcu_node structure and
+	none on some other rcu_node structure.
+
+o	"egt" counts the number of times we balked because although
+	there were blocked tasks, none of them were blocking the
+	current grace period, whether expedited or otherwise.
+
+o	"bt" counts the number of times we balked because boosting
+	had already been initiated for the current grace period.
+
+o	"nb" counts the number of times we balked because there
+	was at least one task blocking the current non-expedited grace
+	period that never had blocked.  If it is already running, it
+	just won't help to boost its priority!
+
+o	"ny" counts the number of times we balked because it was
+	not yet time to start boosting.
+
+o	"nos" counts the number of times we balked for other
+	reasons, e.g., the grace period ended first.
+
+
 CONFIG_TINY_RCU and CONFIG_TINY_PREEMPT_RCU debugfs Files and Formats
 
 These implementations of RCU provides a single debugfs file under the
@@ -394,9 +578,9 @@ o	"neb" is the number of expedited grace periods that have had
 o	"nnb" is the number of normal grace periods that have had
 	to resort to RCU priority boosting since boot.
 
-o	"j" is the low-order 12 bits of the jiffies counter in hexadecimal.
+o	"j" is the low-order 16 bits of the jiffies counter in hexadecimal.
 
-o	"bt" is the low-order 12 bits of the value that the jiffies counter
+o	"bt" is the low-order 16 bits of the value that the jiffies counter
 	will have at the next time that boosting is scheduled to begin.
 
 o	In the line beginning with "normal balk", the fields are as follows:

Documentation/SubmittingPatches

@@ -714,10 +714,11 @@ Jeff Garzik, "Linux kernel patch submission format".
   <http://linux.yyz.us/patch-format.html>
 
 Greg Kroah-Hartman, "How to piss off a kernel subsystem maintainer".
-  <http://www.kroah.com/log/2005/03/31/>
-  <http://www.kroah.com/log/2005/07/08/>
-  <http://www.kroah.com/log/2005/10/19/>
-  <http://www.kroah.com/log/2006/01/11/>
+  <http://www.kroah.com/log/linux/maintainer.html>
+  <http://www.kroah.com/log/linux/maintainer-02.html>
+  <http://www.kroah.com/log/linux/maintainer-03.html>
+  <http://www.kroah.com/log/linux/maintainer-04.html>
+  <http://www.kroah.com/log/linux/maintainer-05.html>
 
 NO!!!! No more huge patch bombs to linux-kernel@vger.kernel.org people!
   <http://marc.theaimsgroup.com/?l=linux-kernel&m=112112749912944&w=2>

Documentation/devicetree/bindings/crypto/fsl-sec4.txt

+=====================================================================
+SEC 4 Device Tree Binding
+Copyright (C) 2008-2011 Freescale Semiconductor Inc.
+
+ CONTENTS
+   -Overview
+   -SEC 4 Node
+   -Job Ring Node
+   -Run Time Integrity Check (RTIC) Node
+   -Run Time Integrity Check (RTIC) Memory Node
+   -Secure Non-Volatile Storage (SNVS) Node
+   -Full Example
+
+NOTE: the SEC 4 is also known as Freescale's Cryptographic Accelerator
+Accelerator and Assurance Module (CAAM).
+
+=====================================================================
+Overview
+
+DESCRIPTION
+
+SEC 4 h/w can process requests from 2 types of sources.
+1. DPAA Queue Interface (HW interface between Queue Manager & SEC 4).
+2. Job Rings (HW interface between cores & SEC 4 registers).
+
+High Speed Data Path Configuration:
+
+HW interface between QM & SEC 4 and also BM & SEC 4, on DPAA-enabled parts
+such as the P4080.  The number of simultaneous dequeues the QI can make is
+equal to the number of Descriptor Controller (DECO) engines in a particular
+SEC version.  E.g., the SEC 4.0 in the P4080 has 5 DECOs and can thus
+dequeue from 5 subportals simultaneously.
+
+Job Ring Data Path Configuration:
+
+Each JR is located on a separate 4k page, they may (or may not) be made visible
+in the memory partition devoted to a particular core.  The P4080 has 4 JRs, so
+up to 4 JRs can be configured; and all 4 JRs process requests in parallel.
+
+=====================================================================
+SEC 4 Node
+
+Description
+
+    Node defines the base address of the SEC 4 block.
+    This block specifies the address range of all global
+    configuration registers for the SEC 4 block.  It
+    also receives interrupts from the Run Time Integrity Check
+    (RTIC) function within the SEC 4 block.
+
+PROPERTIES
+
+   - compatible
+      Usage: required
+      Value type: <string>
+      Definition: Must include "fsl,sec-v4.0"
+
+   - #address-cells
+       Usage: required
+       Value type: <u32>
+       Definition: A standard property.  Defines the number of cells
+           for representing physical addresses in child nodes.
+
+   - #size-cells
+       Usage: required
+       Value type: <u32>
+       Definition: A standard property.  Defines the number of cells
+           for representing the size of physical addresses in
+           child nodes.
+
+   - reg
+      Usage: required
+      Value type: <prop-encoded-array>
+      Definition: A standard property.  Specifies the physical
+          address and length of the SEC4 configuration registers.
+          registers
+
+   - ranges
+       Usage: required
+       Value type: <prop-encoded-array>
+       Definition: A standard property.  Specifies the physical address
+           range of the SEC 4.0 register space (-SNVS not included).  A
+           triplet that includes the child address, parent address, &
+           length.
+
+   - interrupts
+      Usage: required
+      Value type: <prop_encoded-array>
+      Definition:  Specifies the interrupts generated by this
+           device.  The value of the interrupts property
+           consists of one interrupt specifier. The format
+           of the specifier is defined by the binding document
+           describing the node's interrupt parent.
+
+   - interrupt-parent
+      Usage: (required if interrupt property is defined)
+      Value type: <phandle>
+      Definition: A single <phandle> value that points
+          to the interrupt parent to which the child domain
+          is being mapped.
+
+   Note: All other standard properties (see the ePAPR) are allowed
+   but are optional.
+
+
+EXAMPLE
+	crypto@300000 {
+		compatible = "fsl,sec-v4.0";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x300000 0x10000>;
+		ranges = <0 0x300000 0x10000>;
+		interrupt-parent = <&mpic>;
+		interrupts = <92 2>;
+	};
+
+=====================================================================
+Job Ring (JR) Node
+
+    Child of the crypto node defines data processing interface to SEC 4
+    across the peripheral bus for purposes of processing
+    cryptographic descriptors. The specified address
+    range can be made visible to one (or more) cores.
+    The interrupt defined for this node is controlled within
+    the address range of this node.
+
+  - compatible
+      Usage: required
+      Value type: <string>
+      Definition: Must include "fsl,sec-v4.0-job-ring"
+
+  - reg
+      Usage: required
+      Value type: <prop-encoded-array>
+      Definition: Specifies a two JR parameters:  an offset from
+          the parent physical address and the length the JR registers.
+
+   - fsl,liodn
+       Usage: optional-but-recommended
+       Value type: <prop-encoded-array>
+       Definition:
+           Specifies the LIODN to be used in conjunction with
+           the ppid-to-liodn table that specifies the PPID to LIODN mapping.
+           Needed if the PAMU is used.  Value is a 12 bit value
+           where value is a LIODN ID for this JR. This property is
+           normally set by boot firmware.
+
+   - interrupts
+      Usage: required
+      Value type: <prop_encoded-array>
+      Definition:  Specifies the interrupts generated by this
+           device.  The value of the interrupts property
+           consists of one interrupt specifier. The format
+           of the specifier is defined by the binding document
+           describing the node's interrupt parent.
+
+   - interrupt-parent
+      Usage: (required if interrupt property is defined)
+      Value type: <phandle>
+      Definition: A single <phandle> value that points
+          to the interrupt parent to which the child domain
+          is being mapped.
+
+EXAMPLE
+	jr@1000 {
+		compatible = "fsl,sec-v4.0-job-ring";
+		reg = <0x1000 0x1000>;
+		fsl,liodn = <0x081>;
+		interrupt-parent = <&mpic>;
+		interrupts = <88 2>;
+	};
+
+
+=====================================================================
+Run Time Integrity Check (RTIC) Node
+
+  Child node of the crypto node.  Defines a register space that
+  contains up to 5 sets of addresses and their lengths (sizes) that
+  will be checked at run time.  After an initial hash result is
+  calculated, these addresses are checked by HW to monitor any
+  change.  If any memory is modified, a Security Violation is
+  triggered (see SNVS definition).
+
+
+  - compatible
+      Usage: required
+      Value type: <string>
+      Definition: Must include "fsl,sec-v4.0-rtic".
+
+   - #address-cells
+       Usage: required
+       Value type: <u32>
+       Definition: A standard property.  Defines the number of cells
+           for representing physical addresses in child nodes.  Must
+           have a value of 1.
+
+   - #size-cells
+       Usage: required
+       Value type: <u32>
+       Definition: A standard property.  Defines the number of cells
+           for representing the size of physical addresses in
+           child nodes.  Must have a value of 1.
+
+  - reg
+      Usage: required
+      Value type: <prop-encoded-array>
+      Definition: A standard property.  Specifies a two parameters:
+          an offset from the parent physical address and the length
+          the SEC4 registers.
+
+   - ranges
+       Usage: required
+       Value type: <prop-encoded-array>
+       Definition: A standard property.  Specifies the physical address
+           range of the SEC 4 register space (-SNVS not included).  A
+           triplet that includes the child address, parent address, &
+           length.
+
+EXAMPLE
+	rtic@6000 {
+		compatible = "fsl,sec-v4.0-rtic";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x6000 0x100>;
+		ranges = <0x0 0x6100 0xe00>;
+	};
+
+=====================================================================
+Run Time Integrity Check (RTIC) Memory Node
+  A child node that defines individual RTIC memory regions that are used to
+  perform run-time integrity check of memory areas that should not modified.
+  The node defines a register that contains the memory address &
+  length (combined) and a second register that contains the hash result
+  in big endian format.
+
+  - compatible
+      Usage: required
+      Value type: <string>
+      Definition: Must include "fsl,sec-v4.0-rtic-memory".
+
+  - reg
+      Usage: required
+      Value type: <prop-encoded-array>
+      Definition: A standard property.  Specifies two parameters:
+          an offset from the parent physical address and the length:
+
+          1. The location of the RTIC memory address & length registers.
+          2. The location RTIC hash result.
+
+  - fsl,rtic-region
+       Usage: optional-but-recommended
+       Value type: <prop-encoded-array>
+       Definition:
+           Specifies the HW address (36 bit address) for this region
+           followed by the length of the HW partition to be checked;
+           the address is represented as a 64 bit quantity followed
+           by a 32 bit length.
+
+   - fsl,liodn
+       Usage: optional-but-recommended
+       Value type: <prop-encoded-array>
+       Definition:
+           Specifies the LIODN to be used in conjunction with
+           the ppid-to-liodn table that specifies the PPID to LIODN
+           mapping.  Needed if the PAMU is used.  Value is a 12 bit value
+           where value is a LIODN ID for this RTIC memory region. This
+           property is normally set by boot firmware.
+
+EXAMPLE
+	rtic-a@0 {
+		compatible = "fsl,sec-v4.0-rtic-memory";
+		reg = <0x00 0x20 0x100 0x80>;
+		fsl,liodn   = <0x03c>;
+		fsl,rtic-region  = <0x12345678 0x12345678 0x12345678>;
+	};
+
+=====================================================================
+Secure Non-Volatile Storage (SNVS) Node
+
+    Node defines address range and the associated
+    interrupt for the SNVS function.  This function
+    monitors security state information & reports
+    security violations.
+
+  - compatible
+      Usage: required
+      Value type: <string>
+      Definition: Must include "fsl,sec-v4.0-mon".
+
+  - reg
+      Usage: required
+      Value type: <prop-encoded-array>
+      Definition: A standard property.  Specifies the physical
+          address and length of the SEC4 configuration
+          registers.
+
+   - interrupts
+      Usage: required
+      Value type: <prop_encoded-array>
+      Definition:  Specifies the interrupts generated by this
+           device.  The value of the interrupts property
+           consists of one interrupt specifier. The format
+           of the specifier is defined by the binding document
+           describing the node's interrupt parent.
+
+   - interrupt-parent
+      Usage: (required if interrupt property is defined)
+      Value type: <phandle>
+      Definition: A single <phandle> value that points
+          to the interrupt parent to which the child domain
+          is being mapped.
+
+EXAMPLE
+	sec_mon@314000 {
+		compatible = "fsl,sec-v4.0-mon";
+		reg = <0x314000 0x1000>;
+		interrupt-parent = <&mpic>;
+		interrupts = <93 2>;
+	};
+
+=====================================================================
+FULL EXAMPLE
+
+	crypto: crypto@300000 {
+		compatible = "fsl,sec-v4.0";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x300000 0x10000>;
+		ranges = <0 0x300000 0x10000>;
+		interrupt-parent = <&mpic>;
+		interrupts = <92 2>;
+
+		sec_jr0: jr@1000 {
+			compatible = "fsl,sec-v4.0-job-ring";
+			reg = <0x1000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <88 2>;
+		};
+
+		sec_jr1: jr@2000 {
+			compatible = "fsl,sec-v4.0-job-ring";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <89 2>;
+		};
+
+		sec_jr2: jr@3000 {
+			compatible = "fsl,sec-v4.0-job-ring";
+			reg = <0x3000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <90 2>;
+		};
+
+		sec_jr3: jr@4000 {
+			compatible = "fsl,sec-v4.0-job-ring";
+			reg = <0x4000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <91 2>;
+		};
+
+		rtic@6000 {
+			compatible = "fsl,sec-v4.0-rtic";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x6000 0x100>;
+			ranges = <0x0 0x6100 0xe00>;
+
+			rtic_a: rtic-a@0 {
+				compatible = "fsl,sec-v4.0-rtic-memory";
+				reg = <0x00 0x20 0x100 0x80>;
+			};
+
+			rtic_b: rtic-b@20 {
+				compatible = "fsl,sec-v4.0-rtic-memory";
+				reg = <0x20 0x20 0x200 0x80>;
+			};
+
+			rtic_c: rtic-c@40 {
+				compatible = "fsl,sec-v4.0-rtic-memory";
+				reg = <0x40 0x20 0x300 0x80>;
+			};
+
+			rtic_d: rtic-d@60 {
+				compatible = "fsl,sec-v4.0-rtic-memory";
+				reg = <0x60 0x20 0x500 0x80>;
+			};
+		};
+	};
+
+	sec_mon: sec_mon@314000 {
+		compatible = "fsl,sec-v4.0-mon";
+		reg = <0x314000 0x1000>;
+		interrupt-parent = <&mpic>;
+		interrupts = <93 2>;
+	};
+
+=====================================================================

Documentation/devicetree/bindings/net/can/fsl-flexcan.txt

+CAN Device Tree Bindings
+------------------------
+2011 Freescale Semiconductor, Inc.
+
+fsl,flexcan-v1.0 nodes
+-----------------------
+In addition to the required compatible-, reg- and interrupt-properties, you can
+also specify which clock source shall be used for the controller.
+
+CPI Clock- Can Protocol Interface Clock
+	This CLK_SRC bit of CTRL(control register) selects the clock source to
+	the CAN Protocol Interface(CPI) to be either the peripheral clock
+	(driven by the PLL) or the crystal oscillator clock. The selected clock
+	is the one fed to the prescaler to generate the Serial Clock (Sclock).
+	The PRESDIV field of CTRL(control register) controls a prescaler that
+	generates the Serial Clock (Sclock), whose period defines the
+	time quantum used to compose the CAN waveform.
+
+Can Engine Clock Source
+	There are two sources for CAN clock
+	- Platform Clock  It represents the bus clock
+	- Oscillator Clock
+
+	Peripheral Clock (PLL)
+	--------------
+		     |
+		    ---------		      -------------
+		    |       |CPI Clock	      | Prescaler |       Sclock
+		    |       |---------------->| (1.. 256) |------------>
+		    ---------		      -------------
+                     |  |
+	--------------  ---------------------CLK_SRC
+	Oscillator Clock
+
+- fsl,flexcan-clock-source : CAN Engine Clock Source.This property selects
+			     the peripheral clock. PLL clock is fed to the
+			     prescaler to generate the Serial Clock (Sclock).
+			     Valid values are "oscillator" and "platform"
+			     "oscillator": CAN engine clock source is oscillator clock.
+			     "platform" The CAN engine clock source is the bus clock
+		             (platform clock).
+
+- fsl,flexcan-clock-divider : for the reference and system clock, an additional
+			      clock divider can be specified.
+- clock-frequency: frequency required to calculate the bitrate for FlexCAN.
+
+Note:
+	- v1.0 of flexcan-v1.0 represent the IP block version for P1010 SOC.
+	- P1010 does not have oscillator as the Clock Source.So the default
+	  Clock Source is platform clock.
+Examples:
+
+	can0@1c000 {
+		compatible = "fsl,flexcan-v1.0";
+		reg = <0x1c000 0x1000>;
+		interrupts = <48 0x2>;
+		interrupt-parent = <&mpic>;
+		fsl,flexcan-clock-source = "platform";
+		fsl,flexcan-clock-divider = <2>;
+		clock-frequency = <fixed by u-boot>;
+	};

Documentation/devicetree/bindings/powerpc/fsl/ifc.txt

+Integrated Flash Controller
+
+Properties:
+- name : Should be ifc
+- compatible : should contain "fsl,ifc". The version of the integrated
+               flash controller can be found in the IFC_REV register at
+               offset zero.
+
+- #address-cells : Should be either two or three.  The first cell is the
+                   chipselect number, and the remaining cells are the
+                   offset into the chipselect.
+- #size-cells : Either one or two, depending on how large each chipselect
+                can be.
+- reg : Offset and length of the register set for the device
+- interrupts : IFC has two interrupts. The first one is the "common"
+               interrupt(CM_EVTER_STAT), and second is the NAND interrupt
+               (NAND_EVTER_STAT).
+
+- ranges : Each range corresponds to a single chipselect, and covers
+           the entire access window as configured.
+
+Child device nodes describe the devices connected to IFC such as NOR (e.g.
+cfi-flash) and NAND (fsl,ifc-nand). There might be board specific devices
+like FPGAs, CPLDs, etc.
+
+Example:
+
+	ifc@ffe1e000 {
+		compatible = "fsl,ifc", "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0x0 0xffe1e000 0 0x2000>;
+		interrupts = <16 2 19 2>;
+
+		/* NOR, NAND Flashes and CPLD on board */
+		ranges = <0x0 0x0 0x0 0xee000000 0x02000000
+			  0x1 0x0 0x0 0xffa00000 0x00010000
+			  0x3 0x0 0x0 0xffb00000 0x00020000>;
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x2000000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			partition@0 {
+				/* 32MB for user data */
+				reg = <0x0 0x02000000>;
+				label = "NOR Data";
+			};
+		};
+
+		flash@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,ifc-nand";
+			reg = <0x1 0x0 0x10000>;
+
+			partition@0 {
+				/* This location must not be altered  */
+				/* 1MB for u-boot Bootloader Image */
+				reg = <0x0 0x00100000>;
+				label = "NAND U-Boot Image";
+				read-only;
+			};
+		};
+
+		cpld@3,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,p1010rdb-cpld";
+			reg = <0x3 0x0 0x000001f>;
+		};
+	};

Documentation/devicetree/bindings/powerpc/fsl/mpic-timer.txt

+* Freescale MPIC timers
+
+Required properties:
+- compatible: "fsl,mpic-global-timer"
+
+- reg : Contains two regions.  The first is the main timer register bank
+  (GTCCRxx, GTBCRxx, GTVPRxx, GTDRxx).  The second is the timer control
+  register (TCRx) for the group.
+
+- fsl,available-ranges: use <start count> style section to define which
+  timer interrupts can be used.  This property is optional; without this,
+  all timers within the group can be used.
+
+- interrupts: one interrupt per timer in the group, in order, starting
+  with timer zero.  If timer-available-ranges is present, only the
+  interrupts that correspond to available timers shall be present.
+
+Example:
+	/* Note that this requires #interrupt-cells to be 4 */
+	timer0: timer@41100 {
+		compatible = "fsl,mpic-global-timer";
+		reg = <0x41100 0x100 0x41300 4>;
+
+		/* Another AMP partition is using timers 0 and 1 */
+		fsl,available-ranges = <2 2>;
+
+		interrupts = <2 0 3 0
+		              3 0 3 0>;
+	};
+
+	timer1: timer@42100 {
+		compatible = "fsl,mpic-global-timer";
+		reg = <0x42100 0x100 0x42300 4>;
+		interrupts = <4 0 3 0
+		              5 0 3 0
+		              6 0 3 0
+		              7 0 3 0>;
+	};

Documentation/devicetree/bindings/powerpc/fsl/mpic.txt

@@ -190,7 +190,7 @@ EXAMPLE 4
 	 */
 	timer0: timer@41100 {
 		compatible = "fsl,mpic-global-timer";
-		reg = <0x41100 0x100>;
+		reg = <0x41100 0x100 0x41300 4>;
 		interrupts = <0 0 3 0
 		              1 0 3 0
 		              2 0 3 0

Documentation/devicetree/bindings/powerpc/nintendo/wii.txt

@@ -127,7 +127,7 @@ Nintendo Wii device tree
    - reg : should contain the SDHCI registers location and length
    - interrupts : should contain the SDHCI interrupt
 
-1.j) The Inter-Processsor Communication (IPC) node
+1.j) The Inter-Processor Communication (IPC) node
 
   Represent the Inter-Processor Communication interface. This interface
   enables communications between the Broadway and the Starlet processors.

Documentation/dontdiff

 *.a
 *.aux
 *.bin
+*.bz2
+*.cis
 *.cpio
 *.csp
 *.dsp
@@ -8,6 +10,8 @@
 *.elf
 *.eps
 *.fw
+*.gcno
+*.gcov
 *.gen.S
 *.gif
 *.grep
@@ -19,14 +23,20 @@
 *.ko
 *.log
 *.lst
+*.lzma
+*.lzo
+*.mo
 *.moc
 *.mod.c
 *.o
 *.o.*
+*.order
 *.orig
 *.out
+*.patch
 *.pdf
 *.png
+*.pot
 *.ps
 *.rej
 *.s
@@ -39,16 +49,22 @@
 *.tex
 *.ver
 *.xml
+*.xz
 *_MODULES
 *_vga16.c
 *~
+\#*#
 *.9
-*.9.gz
 .*
+.*.d
 .mm
 53c700_d.h
 CVS
 ChangeSet
+GPATH
+GRTAGS
+GSYMS
+GTAGS
 Image
 Kerntypes
 Module.markers
@@ -57,15 +73,14 @@ PENDING
 SCCS
 System.map*
 TAGS
+aconf
+af_names.h
 aic7*reg.h*
 aic7*reg_print.c*
 aic7*seq.h*
 aicasm
 aicdb.h*
-altivec1.c
-altivec2.c
-altivec4.c
-altivec8.c
+altivec*.c
 asm-offsets.h
 asm_offsets.h
 autoconf.h*
@@ -80,6 +95,7 @@ btfixupprep
 build
 bvmlinux
 bzImage*
+capability_names.h
 capflags.c
 classlist.h*
 comp*.log
@@ -88,7 +104,8 @@ conf
 config
 config-*
 config_data.h*
-config_data.gz*
+config.mak
+config.mak.autogen
 conmakehash
 consolemap_deftbl.c*
 cpustr.h
@@ -96,7 +113,9 @@ crc32table.h*
 cscope.*
 defkeymap.c
 devlist.h*
+dnotify_test
 docproc
+dslm
 elf2ecoff
 elfconfig.h*
 evergreen_reg_safe.h
@@ -105,6 +124,7 @@ flask.h
 fore200e_mkfirm
 fore200e_pca_fw.c*
 gconf
+gconf.glade.h
 gen-devlist
 gen_crc32table
 gen_init_cpio
@@ -112,11 +132,12 @@ generated
 genheaders
 genksyms
 *_gray256.c
+hpet_example
+hugepage-mmap
+hugepage-shm
 ihex2fw
 ikconfig.h*
 inat-tables.c
-initramfs_data.cpio
-initramfs_data.cpio.gz
 initramfs_list
 int16.c
 int1.c
@@ -133,15 +154,19 @@ kxgettext
 lkc_defs.h
 lex.c
 lex.*.c
+linux
 logo_*.c
 logo_*_clut224.c
 logo_*_mono.c
 lxdialog
+mach
 mach-types
 mach-types.h
 machtypes.h
 map
+map_hugetlb
 maui_boot.h
+media
 mconf
 miboot*
 mk_elfconfig
@@ -150,23 +175,29 @@ mkbugboot
 mkcpustr
 mkdep
 mkprep
+mkregtable
 mktables
 mktree
 modpost
 modules.builtin
 modules.order
 modversions.h*
+nconf
 ncscope.*
 offset.h
 offsets.h
 oui.c*
+page-types
 parse.c
 parse.h
 patches*
 pca200e.bin
 pca200e_ecd.bin2
-piggy.gz
+perf.data
+perf.data.old
+perf-archive
 piggyback
+piggy.gzip
 piggy.S
 pnmtologo
 ppc_defs.h*
@@ -177,10 +208,9 @@ r200_reg_safe.h
 r300_reg_safe.h
 r420_reg_safe.h
 r600_reg_safe.h
-raid6altivec*.c
-raid6int*.c
-raid6tables.c
+recordmcount
 relocs
+rlim_names.h
 rn50_reg_safe.h
 rs600_reg_safe.h
 rv515_reg_safe.h
@@ -194,6 +224,7 @@ split-include
 syscalltab.h
 tables.c
 tags
+test_get_len
 tftpboot.img
 timeconst.h
 times.h*
@@ -210,10 +241,13 @@ vdso32.so.dbg
 vdso64.lds
 vdso64.so.dbg
 version.h*
+vmImage
 vmlinux
 vmlinux-*
 vmlinux.aout
+vmlinux.bin.all
 vmlinux.lds
+vmlinuz
 voffset.h
 vsyscall.lds
 vsyscall_32.lds

Documentation/driver-model/bus.txt

@@ -3,24 +3,7 @@ Bus Types
 
 Definition
 ~~~~~~~~~~
-
-struct bus_type {
-	char			* name;
-
-	struct subsystem	subsys;
-	struct kset		drivers;
-	struct kset		devices;
-
-	struct bus_attribute	* bus_attrs;
-	struct device_attribute	* dev_attrs;
-	struct driver_attribute	* drv_attrs;
-
-	int		(*match)(struct device * dev, struct device_driver * drv);
-	int		(*hotplug) (struct device *dev, char **envp, 
-				    int num_envp, char *buffer, int buffer_size);
-	int		(*suspend)(struct device * dev, pm_message_t state);
-	int		(*resume)(struct device * dev);
-};
+See the kerneldoc for the struct bus_type.
 
 int bus_register(struct bus_type * bus);
 

Documentation/driver-model/class.txt

@@ -27,22 +27,7 @@ The device class structure looks like:
 typedef int (*devclass_add)(struct device *);
 typedef void (*devclass_remove)(struct device *);
 
-struct device_class {
-	char			* name;
-	rwlock_t		lock;
-	u32			devnum;
-	struct list_head	node;
-
-	struct list_head	drivers;
-	struct list_head	intf_list;
-
-	struct driver_dir_entry	dir;
-	struct driver_dir_entry	device_dir;
-	struct driver_dir_entry	driver_dir;
-
-	devclass_add		add_device;
-	devclass_remove		remove_device;
-};
+See the kerneldoc for the struct class.
 
 A typical device class definition would look like: 
 

Documentation/driver-model/device.txt

@@ -2,96 +2,7 @@
 The Basic Device Structure
 ~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-struct device {
-        struct list_head g_list;
-        struct list_head node;
-        struct list_head bus_list;
-        struct list_head driver_list;
-        struct list_head intf_list;
-        struct list_head children;
-        struct device   * parent;
-
-        char    name[DEVICE_NAME_SIZE];
-        char    bus_id[BUS_ID_SIZE];
-
-        spinlock_t      lock;
-        atomic_t        refcount;
-
-        struct bus_type * bus;
-        struct driver_dir_entry dir;
-
-	u32		class_num;
-
-        struct device_driver *driver;
-        void            *driver_data;
-        void            *platform_data;
-
-        u32             current_state;
-        unsigned char *saved_state;
-
-        void    (*release)(struct device * dev);
-};
-
-Fields 
-~~~~~~
-g_list:	Node in the global device list.
-
-node:	Node in device's parent's children list.
-
-bus_list: Node in device's bus's devices list.
-
-driver_list:   Node in device's driver's devices list.
-
-intf_list:     List of intf_data. There is one structure allocated for
-	       each interface that the device supports.
-
-children:      List of child devices.
-
-parent:        *** FIXME ***
-
-name:	       ASCII description of device. 
-	       Example: " 3Com Corporation 3c905 100BaseTX [Boomerang]"
-
-bus_id:	       ASCII representation of device's bus position. This 
-	       field should be a name unique across all devices on the
-	       bus type the device belongs to. 
-
-	       Example: PCI bus_ids are in the form of
-	       <bus number>:<slot number>.<function number> 
-	       This name is unique across all PCI devices in the system.
-
-lock:	       Spinlock for the device. 
-
-refcount:      Reference count on the device.
-
-bus:	       Pointer to struct bus_type that device belongs to.
-
-dir:	       Device's sysfs directory.
-
-class_num:     Class-enumerated value of the device.
-
-driver:	       Pointer to struct device_driver that controls the device.
-
-driver_data:   Driver-specific data.
-
-platform_data: Platform data specific to the device.
-
-	       Example:  for devices on custom boards, as typical of embedded
-	       and SOC based hardware, Linux often uses platform_data to point
-	       to board-specific structures describing devices and how they
-	       are wired.  That can include what ports are available, chip
-	       variants, which GPIO pins act in what additional roles, and so
-	       on.  This shrinks the "Board Support Packages" (BSPs) and
-	       minimizes board-specific #ifdefs in drivers.
-
-current_state: Current power state of the device.
-
-saved_state:   Pointer to saved state of the device. This is usable by
-	       the device driver controlling the device.
-
-release:       Callback to free the device after all references have 
-	       gone away. This should be set by the allocator of the 
-	       device (i.e. the bus driver that discovered the device).
+See the kerneldoc for the struct device.
 
 
 Programming Interface

Documentation/driver-model/driver.txt

 
 Device Drivers
 
-struct device_driver {
-        char                    * name;
-        struct bus_type         * bus;
-
-        struct completion	unloaded;
-        struct kobject		kobj;
-        list_t                  devices;
-
-        struct module		*owner;
-
-        int     (*probe)        (struct device * dev);
-        int     (*remove)       (struct device * dev);
-
-        int     (*suspend)      (struct device * dev, pm_message_t state);
-        int     (*resume)       (struct device * dev);
-};
-
+See the kerneldoc for the struct device_driver.
 
 
 Allocation

Documentation/feature-removal-schedule.txt

@@ -35,17 +35,6 @@ Who:	Luis R. Rodriguez <lrodriguez@atheros.com>
 
 ---------------------------
 
-What:	AR9170USB
-When:	2.6.40
-
-Why:	This driver is deprecated and the firmware is no longer
-	maintained. The replacement driver "carl9170" has been
-	around for a while, so the devices are still supported.
-
-Who:	Christian Lamparter <chunkeey@googlemail.com>
-
----------------------------
-
 What:	IRQF_SAMPLE_RANDOM
 Check:	IRQF_SAMPLE_RANDOM
 When:	July 2009
@@ -226,7 +215,7 @@ Who:	Zhang Rui <rui.zhang@intel.com>
 What:	CONFIG_ACPI_PROCFS_POWER
 When:	2.6.39
 Why:	sysfs I/F for ACPI power devices, including AC and Battery,
-        has been working in upstream kenrel since 2.6.24, Sep 2007.
+        has been working in upstream kernel since 2.6.24, Sep 2007.
 	In 2.6.37, we make the sysfs I/F always built in and this option
 	disabled by default.
 	Remove this option and the ACPI power procfs interface in 2.6.39.
@@ -405,16 +394,6 @@ Who: 	anybody or Florian Mickler <florian@mickler.org>
 
 ----------------------------
 
-What:	capifs
-When:	February 2011
-Files:	drivers/isdn/capi/capifs.*
-Why:	udev fully replaces this special file system that only contains CAPI
-	NCCI TTY device nodes. User space (pppdcapiplugin) works without
-	noticing the difference.
-Who:	Jan Kiszka <jan.kiszka@web.de>
-
-----------------------------
-
 What:	KVM paravirt mmu host support
 When:	January 2011
 Why:	The paravirt mmu host support is slower than non-paravirt mmu, both
@@ -460,14 +439,6 @@ Who:	Thomas Gleixner <tglx@linutronix.de>
 
 ----------------------------
 
-What:	The acpi_sleep=s4_nonvs command line option
-When:	2.6.37
-Files:	arch/x86/kernel/acpi/sleep.c
-Why:	superseded by acpi_sleep=nonvs
-Who:	Rafael J. Wysocki <rjw@sisk.pl>
-
-----------------------------
-
 What: 	PCI DMA unmap state API
 When:	August 2012
 Why:	PCI DMA unmap state API (include/linux/pci-dma.h) was replaced
@@ -580,3 +551,26 @@ Why:	These legacy callbacks should no longer be used as i2c-core offers
 Who:	Jean Delvare <khali@linux-fr.org>
 
 ----------------------------
+
+What:	Support for UVCIOC_CTRL_ADD in the uvcvideo driver
+When:	2.6.42
+Why:	The information passed to the driver by this ioctl is now queried
+	dynamically from the device.
+Who:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+----------------------------
+
+What:	Support for UVCIOC_CTRL_MAP_OLD in the uvcvideo driver
+When:	2.6.42
+Why:	Used only by applications compiled against older driver versions.
+	Superseded by UVCIOC_CTRL_MAP which supports V4L2 menu controls.
+Who:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+----------------------------
+
+What:	Support for UVCIOC_CTRL_GET and UVCIOC_CTRL_SET in the uvcvideo driver
+When:	2.6.42
+Why:	Superseded by the UVCIOC_CTRL_QUERY ioctl.
+Who:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+----------------------------

Documentation/filesystems/proc.txt

@@ -836,7 +836,6 @@ Provides counts of softirq handlers serviced since boot time, for each cpu.
  TASKLET:          0          0          0        290
    SCHED:      27035      26983      26971      26746
  HRTIMER:          0          0          0          0
-     RCU:       1678       1769       2178       2250
 
 
 1.3 IDE devices in /proc/ide

Documentation/hid/hidraw.txt

+      HIDRAW - Raw Access to USB and Bluetooth Human Interface Devices
+     ==================================================================
+
+The hidraw driver provides a raw interface to USB and Bluetooth Human
+Interface Devices (HIDs).  It differs from hiddev in that reports sent and
+received are not parsed by the HID parser, but are sent to and received from
+the device unmodified.
+
+Hidraw should be used if the userspace application knows exactly how to
+communicate with the hardware device, and is able to construct the HID
+reports manually.  This is often the case when making userspace drivers for
+custom HID devices.
+
+Hidraw is also useful for communicating with non-conformant HID devices
+which send and receive data in a way that is inconsistent with their report
+descriptors.  Because hiddev parses reports which are sent and received
+through it, checking them against the device's report descriptor, such
+communication with these non-conformant devices is impossible using hiddev.
+Hidraw is the only alternative, short of writing a custom kernel driver, for
+these non-conformant devices.
+
+A benefit of hidraw is that its use by userspace applications is independent
+of the underlying hardware type.  Currently, Hidraw is implemented for USB
+and Bluetooth.  In the future, as new hardware bus types are developed which
+use the HID specification, hidraw will be expanded to add support for these
+new bus types.
+
+Hidraw uses a dynamic major number, meaning that udev should be relied on to
+create hidraw device nodes.  Udev will typically create the device nodes
+directly under /dev (eg: /dev/hidraw0).  As this location is distribution-
+and udev rule-dependent, applications should use libudev to locate hidraw
+devices attached to the system.  There is a tutorial on libudev with a
+working example at:
+	http://www.signal11.us/oss/udev/
+
+The HIDRAW API
+---------------
+
+read()
+-------
+read() will read a queued report received from the HID device. On USB
+devices, the reports read using read() are the reports sent from the device
+on the INTERRUPT IN endpoint.  By default, read() will block until there is
+a report available to be read.  read() can be made non-blocking, by passing
+the O_NONBLOCK flag to open(), or by setting the O_NONBLOCK flag using
+fcntl().
+
+On a device which uses numbered reports, the first byte of the returned data
+will be the report number; the report data follows, beginning in the second
+byte.  For devices which do not use numbered reports, the report data
+will begin at the first byte.
+
+write()
+--------
+The write() function will write a report to the device. For USB devices, if
+the device has an INTERRUPT OUT endpoint, the report will be sent on that
+endpoint. If it does not, the report will be sent over the control endpoint,
+using a SET_REPORT transfer.
+
+The first byte of the buffer passed to write() should be set to the report
+number.  If the device does not use numbered reports, the first byte should
+be set to 0. The report data itself should begin at the second byte.
+
+ioctl()
+--------
+Hidraw supports the following ioctls:
+
+HIDIOCGRDESCSIZE: Get Report Descriptor Size
+This ioctl will get the size of the device's report descriptor.
+
+HIDIOCGRDESC: Get Report Descriptor
+This ioctl returns the device's report descriptor using a
+hidraw_report_descriptor struct.  Make sure to set the size field of the
+hidraw_report_descriptor struct to the size returned from HIDIOCGRDESCSIZE.
+
+HIDIOCGRAWINFO: Get Raw Info
+This ioctl will return a hidraw_devinfo struct containing the bus type, the
+vendor ID (VID), and product ID (PID) of the device. The bus type can be one
+of:
+	BUS_USB
+	BUS_HIL
+	BUS_BLUETOOTH
+	BUS_VIRTUAL
+which are defined in linux/input.h.
+
+HIDIOCGRAWNAME(len): Get Raw Name
+This ioctl returns a string containing the vendor and product strings of
+the device.  The returned string is Unicode, UTF-8 encoded.
+
+HIDIOCGRAWPHYS(len): Get Physical Address
+This ioctl returns a string representing the physical address of the device.
+For USB devices, the string contains the physical path to the device (the
+USB controller, hubs, ports, etc).  For Bluetooth devices, the string
+contains the hardware (MAC) address of the device.
+
+HIDIOCSFEATURE(len): Send a Feature Report
+This ioctl will send a feature report to the device.  Per the HID
+specification, feature reports are always sent using the control endpoint.
+Set the first byte of the supplied buffer to the report number.  For devices
+which do not use numbered reports, set the first byte to 0. The report data
+begins in the second byte. Make sure to set len accordingly, to one more
+than the length of the report (to account for the report number).
+
+HIDIOCGFEATURE(len): Get a Feature Report
+This ioctl will request a feature report from the device using the control
+endpoint.  The first byte of the supplied buffer should be set to the report
+number of the requested report.  For devices which do not use numbered
+reports, set the first byte to 0.  The report will be returned starting at
+the first byte of the buffer (ie: the report number is not returned).
+
+Example
+---------
+In samples/, find hid-example.c, which shows examples of read(), write(),
+and all the ioctls for hidraw.  The code may be used by anyone for any
+purpose, and can serve as a starting point for developing applications using
+hidraw.
+
+Document by:
+	Alan Ott <alan@signal11.us>, Signal 11 Software

Documentation/hwmon/adm1275

+Kernel driver adm1275
+=====================
+
+Supported chips:
+  * Analog Devices ADM1275
+    Prefix: 'adm1275'
+    Addresses scanned: -
+    Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1275.pdf
+
+Author: Guenter Roeck <guenter.roeck@ericsson.com>
+
+
+Description
+-----------
+
+This driver supports hardware montoring for Analog Devices ADM1275 Hot-Swap
+Controller and Digital Power Monitor.
+
+The ADM1275 is a hot-swap controller that allows a circuit board to be removed
+from or inserted into a live backplane. It also features current and voltage
+readback via an integrated 12-bit analog-to-digital converter (ADC), accessed
+using a PMBus. interface.
+
+The driver is a client driver to the core PMBus driver. Please see
+Documentation/hwmon/pmbus for details on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices for
+details.
+
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data. Please see
+Documentation/hwmon/pmbus for details.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported. Limits are read-write; all other
+attributes are read-only.
+
+in1_label		"vin1" or "vout1" depending on chip variant and
+			configuration.
+in1_input		Measured voltage. From READ_VOUT register.
+in1_min			Minumum Voltage. From VOUT_UV_WARN_LIMIT register.
+in1_max			Maximum voltage. From VOUT_OV_WARN_LIMIT register.
+in1_min_alarm		Voltage low alarm. From VOLTAGE_UV_WARNING status.
+in1_max_alarm		Voltage high alarm. From VOLTAGE_OV_WARNING status.
+
+curr1_label		"iout1"
+curr1_input		Measured current. From READ_IOUT register.
+curr1_max		Maximum current. From IOUT_OC_WARN_LIMIT register.
+curr1_max_alarm		Current high alarm. From IOUT_OC_WARN_LIMIT register.

Documentation/hwmon/coretemp

@@ -15,8 +15,13 @@ Author: Rudolf Marek
 
 Description
 -----------
+This driver permits reading the DTS (Digital Temperature Sensor) embedded
+inside Intel CPUs. This driver can read both the per-core and per-package
+temperature using the appropriate sensors. The per-package sensor is new;
+as of now, it is present only in the SandyBridge platform. The driver will
+show the temperature of all cores inside a package under a single device
+directory inside hwmon.
 
-This driver permits reading temperature sensor embedded inside Intel Core CPU.
 Temperature is measured in degrees Celsius and measurement resolution is
 1 degree C. Valid temperatures are from 0 to TjMax degrees C, because
 the actual value of temperature register is in fact a delta from TjMax.
@@ -27,13 +32,15 @@ mechanism will perform actions to forcibly cool down the processor. Alarm
 may be raised, if the temperature grows enough (more than TjMax) to trigger
 the Out-Of-Spec bit. Following table summarizes the exported sysfs files:
 
-temp1_input	 - Core temperature (in millidegrees Celsius).
-temp1_max	 - All cooling devices should be turned on (on Core2).
-temp1_crit	 - Maximum junction temperature (in millidegrees Celsius).
-temp1_crit_alarm - Set when Out-of-spec bit is set, never clears.
+All Sysfs entries are named with their core_id (represented here by 'X').
+tempX_input	 - Core temperature (in millidegrees Celsius).
+tempX_max	 - All cooling devices should be turned on (on Core2).
+tempX_crit	 - Maximum junction temperature (in millidegrees Celsius).
+tempX_crit_alarm - Set when Out-of-spec bit is set, never clears.
 		   Correct CPU operation is no longer guaranteed.
-temp1_label	 - Contains string "Core X", where X is processor
-		   number.
+tempX_label	 - Contains string "Core X", where X is processor
+		   number. For Package temp, this will be "Physical id Y",
+		   where Y is the package number.
 
 The TjMax temperature is set to 85 degrees C if undocumented model specific
 register (UMSR) 0xee has bit 30 set. If not the TjMax is 100 degrees C as

Documentation/hwmon/max16065

+Kernel driver max16065
+======================
+
+Supported chips:
+  * Maxim MAX16065, MAX16066
+    Prefixes: 'max16065', 'max16066'
+    Addresses scanned: -
+    Datasheet:
+	http://datasheets.maxim-ic.com/en/ds/MAX16065-MAX16066.pdf
+ *  Maxim MAX16067
+    Prefix: 'max16067'
+    Addresses scanned: -
+    Datasheet:
+	http://datasheets.maxim-ic.com/en/ds/MAX16067.pdf
+ *  Maxim MAX16068
+    Prefix: 'max16068'
+    Addresses scanned: -
+    Datasheet:
+	http://datasheets.maxim-ic.com/en/ds/MAX16068.pdf
+ *  Maxim MAX16070/MAX16071
+    Prefixes: 'max16070', 'max16071'
+    Addresses scanned: -
+    Datasheet:
+	http://datasheets.maxim-ic.com/en/ds/MAX16070-MAX16071.pdf
+
+
+Author: Guenter Roeck <guenter.roeck@ericsson.com>
+
+
+Description
+-----------
+
+[From datasheets] The MAX16065/MAX16066 flash-configurable system managers
+monitor and sequence multiple system voltages. The MAX16065/MAX16066 can also
+accurately monitor (+/-2.5%) one current channel using a dedicated high-side
+current-sense amplifier. The MAX16065 manages up to twelve system voltages
+simultaneously, and the MAX16066 manages up to eight supply voltages.
+
+The MAX16067 flash-configurable system manager monitors and sequences multiple
+system voltages. The MAX16067 manages up to six system voltages simultaneously.
+
+The MAX16068 flash-configurable system manager monitors and manages up to six
+system voltages simultaneously.
+
+The MAX16070/MAX16071 flash-configurable system monitors supervise multiple
+system voltages. The MAX16070/MAX16071 can also accurately monitor (+/-2.5%)
+one current channel using a dedicated high-side current-sense amplifier. The
+MAX16070 monitors up to twelve system voltages simultaneously, and the MAX16071
+monitors up to eight supply voltages.
+
+Each monitored channel has its own low and high critical limits. MAX16065,
+MAX16066, MAX16070, and MAX16071 support an additional limit which is
+configurable as either low or high secondary limit. MAX16065, MAX16066,
+MAX16070, and MAX16071 also support supply current monitoring.
+
+
+Usage Notes
+-----------
+
+This driver does not probe for devices, since there is no register which
+can be safely used to identify the chip. You will have to instantiate
+the devices explicitly. Please see Documentation/i2c/instantiating-devices for
+details.
+
+
+Sysfs entries
+-------------
+
+in[0-11]_input		Input voltage measurements.
+
+in12_input		Voltage on CSP (Current Sense Positive) pin.
+			Only if the chip supports current sensing and if
+			current sensing is enabled.
+
+in[0-11]_min		Low warning limit.
+			Supported on MAX16065, MAX16066, MAX16070, and MAX16071
+			only.
+
+in[0-11]_max		High warning limit.
+			Supported on MAX16065, MAX16066, MAX16070, and MAX16071
+			only.
+
+			Either low or high warning limits are supported
+			(depending on chip configuration), but not both.
+
+in[0-11]_lcrit		Low critical limit.
+
+in[0-11]_crit		High critical limit.
+
+in[0-11]_alarm		Input voltage alarm.
+
+curr1_input		Current sense input; only if the chip supports current
+			sensing and if current sensing is enabled.
+			Displayed current assumes 0.001 Ohm current sense
+			resistor.
+
+curr1_alarm		Overcurrent alarm; only if the chip supports current
+			sensing and if current sensing is enabled.

Documentation/hwmon/max6642

+Kernel driver max6642
+=====================
+
+Supported chips:
+  * Maxim MAX6642
+    Prefix: 'max6642'
+    Addresses scanned: I2C 0x48-0x4f
+    Datasheet: Publicly available at the Maxim website
+               http://datasheets.maxim-ic.com/en/ds/MAX6642.pdf
+
+Authors:
+        Per Dalen <per.dalen@appeartv.com>
+
+Description
+-----------
+
+The MAX6642 is a digital temperature sensor. It senses its own temperature as
+well as the temperature on one external diode.
+
+All temperature values are given in degrees Celsius. Resolution
+is 0.25 degree for the local temperature and for the remote temperature.

Documentation/hwmon/pkgtemp

-Kernel driver pkgtemp
-======================
-
-Supported chips:
-  * Intel family
-    Prefix: 'pkgtemp'
-    CPUID:
-    Datasheet: Intel 64 and IA-32 Architectures Software Developer's Manual
-               Volume 3A: System Programming Guide
-
-Author: Fenghua Yu
-
-Description
------------
-
-This driver permits reading package level temperature sensor embedded inside
-Intel CPU package. The sensors can be in core, uncore, memory controller, or
-other components in a package. The feature is first implemented in Intel Sandy
-Bridge platform.
-
-Temperature is measured in degrees Celsius and measurement resolution is
-1 degree C. Valid temperatures are from 0 to TjMax degrees C, because the actual
-value of temperature register is in fact a delta from TjMax.
-
-Temperature known as TjMax is the maximum junction temperature of package.
-We get this from MSR_IA32_TEMPERATURE_TARGET. If the MSR is not accessible,
-we define TjMax as 100 degrees Celsius. At this temperature, protection
-mechanism will perform actions to forcibly cool down the package. Alarm
-may be raised, if the temperature grows enough (more than TjMax) to trigger
-the Out-Of-Spec bit. Following table summarizes the exported sysfs files:
-
-temp1_input	  - Package temperature (in millidegrees Celsius).
-temp1_max        - All cooling devices should be turned on.
-temp1_crit	  - Maximum junction temperature (in millidegrees Celsius).
-temp1_crit_alarm - Set when Out-of-spec bit is set, never clears.
-		    Correct CPU operation is no longer guaranteed.

Documentation/hwmon/sht15

+Kernel driver sht15
+===================
+
+Authors:
+  * Wouter Horre
+  * Jonathan Cameron
+  * Vivien Didelot <vivien.didelot@savoirfairelinux.com>
+  * Jerome Oufella <jerome.oufella@savoirfairelinux.com>
+
+Supported chips:
+  * Sensirion SHT10
+    Prefix: 'sht10'
+
+  * Sensirion SHT11
+    Prefix: 'sht11'
+
+  * Sensirion SHT15
+    Prefix: 'sht15'
+
+  * Sensirion SHT71
+    Prefix: 'sht71'
+
+  * Sensirion SHT75
+    Prefix: 'sht75'
+
+Datasheet: Publicly available at the Sensirion website
+http://www.sensirion.ch/en/pdf/product_information/Datasheet-humidity-sensor-SHT1x.pdf
+
+Description
+-----------
+
+The SHT10, SHT11, SHT15, SHT71, and SHT75 are humidity and temperature
+sensors.
+
+The devices communicate using two GPIO lines.
+
+Supported resolutions for the measurements are 14 bits for temperature and 12
+bits for humidity, or 12 bits for temperature and 8 bits for humidity.
+
+The humidity calibration coefficients are programmed into an OTP memory on the
+chip. These coefficients are used to internally calibrate the signals from the
+sensors. Disabling the reload of those coefficients allows saving 10ms for each
+measurement and decrease power consumption, while loosing on precision.
+
+Some options may be set directly in the sht15_platform_data structure
+or via sysfs attributes.
+
+Notes:
+  * The regulator supply name is set to "vcc".
+  * If a CRC validation fails, a soft reset command is sent, which resets
+    status register to its hardware default value, but the driver will try to
+    restore the previous device configuration.
+
+Platform data
+-------------
+
+* checksum:
+  set it to true to enable CRC validation of the readings (default to false).
+* no_otp_reload:
+  flag to indicate not to reload from OTP (default to false).
+* low_resolution:
+  flag to indicate the temp/humidity resolution to use (default to false).
+
+Sysfs interface
+---------------
+
+* temp1_input:     temperature input
+* humidity1_input: humidity input
+* heater_enable:   write 1 in this attribute to enable the on-chip heater,
+                   0 to disable it. Be careful not to enable the heater
+                   for too long.
+* temp1_fault:     if 1, this means that the voltage is low (below 2.47V) and
+                   measurement may be invalid.
+* humidity1_fault: same as temp1_fault.

Documentation/hwmon/ucd9000

+Kernel driver ucd9000
+=====================
+
+Supported chips:
+  * TI UCD90120, UCD90124, UCD9090, and UCD90910
+    Prefixes: 'ucd90120', 'ucd90124', 'ucd9090', 'ucd90910'
+    Addresses scanned: -
+    Datasheets:
+	http://focus.ti.com/lit/ds/symlink/ucd90120.pdf
+	http://focus.ti.com/lit/ds/symlink/ucd90124.pdf
+	http://focus.ti.com/lit/ds/symlink/ucd9090.pdf
+	http://focus.ti.com/lit/ds/symlink/ucd90910.pdf
+
+Author: Guenter Roeck <guenter.roeck@ericsson.com>
+
+
+Description
+-----------
+
+From datasheets:
+
+The UCD90120 Power Supply Sequencer and System Health Monitor monitors and
+sequences up to 12 independent voltage rails. The device integrates a 12-bit
+ADC with a 2.5V internal reference for monitoring up to 13 power supply voltage,
+current, or temperature inputs.
+
+The UCD90124 is a 12-rail PMBus/I2C addressable power-supply sequencer and
+system-health monitor. The device integrates a 12-bit ADC for monitoring up to
+13 power-supply voltage, current, or temperature inputs. Twenty-six GPIO pins
+can be used for power supply enables, power-on reset signals, external
+interrupts, cascading, or other system functions. Twelve of these pins offer PWM
+functionality. Using these pins, the UCD90124 offers support for fan control,
+margining, and general-purpose PWM functions.
+
+The UCD9090 is a 10-rail PMBus/I2C addressable power-supply sequencer and
+monitor. The device integrates a 12-bit ADC for monitoring up to 10 power-supply
+voltage inputs. Twenty-three GPIO pins can be used for power supply enables,
+power-on reset signals, external interrupts, cascading, or other system
+functions. Ten of these pins offer PWM functionality. Using these pins, the
+UCD9090 offers support for margining, and general-purpose PWM functions.
+
+The UCD90910 is a ten-rail I2C / PMBus addressable power-supply sequencer and
+system-health monitor. The device integrates a 12-bit ADC for monitoring up to
+13 power-supply voltage, current, or temperature inputs.
+
+This driver is a client driver to the core PMBus driver. Please see
+Documentation/hwmon/pmbus for details on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices for
+details.
+
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data. Please see
+Documentation/hwmon/pmbus for details.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported. Limits are read-write; all other
+attributes are read-only.
+
+in[1-12]_label		"vout[1-12]".
+in[1-12]_input		Measured voltage. From READ_VOUT register.
+in[1-12]_min		Minumum Voltage. From VOUT_UV_WARN_LIMIT register.
+in[1-12]_max		Maximum voltage. From VOUT_OV_WARN_LIMIT register.
+in[1-12]_lcrit		Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register.
+in[1-12]_crit		Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register.
+in[1-12]_min_alarm	Voltage low alarm. From VOLTAGE_UV_WARNING status.
+in[1-12]_max_alarm	Voltage high alarm. From VOLTAGE_OV_WARNING status.
+in[1-12]_lcrit_alarm	Voltage critical low alarm. From VOLTAGE_UV_FAULT status.
+in[1-12]_crit_alarm	Voltage critical high alarm. From VOLTAGE_OV_FAULT status.
+
+curr[1-12]_label	"iout[1-12]".
+curr[1-12]_input	Measured current. From READ_IOUT register.
+curr[1-12]_max		Maximum current. From IOUT_OC_WARN_LIMIT register.
+curr[1-12]_lcrit	Critical minumum output current. From IOUT_UC_FAULT_LIMIT
+			register.
+curr[1-12]_crit		Critical maximum current. From IOUT_OC_FAULT_LIMIT register.
+curr[1-12]_max_alarm	Current high alarm. From IOUT_OC_WARNING status.
+curr[1-12]_crit_alarm	Current critical high alarm. From IOUT_OC_FAULT status.
+
+			For each attribute index, either voltage or current is
+			reported, but not both. If voltage or current is
+			reported depends on the chip configuration.
+
+temp[1-2]_input		Measured temperatures. From READ_TEMPERATURE_1 and
+			READ_TEMPERATURE_2 registers.
+temp[1-2]_max		Maximum temperature. From OT_WARN_LIMIT register.
+temp[1-2]_crit		Critical high temperature. From OT_FAULT_LIMIT register.
+temp[1-2]_max_alarm	Temperature high alarm.
+temp[1-2]_crit_alarm	Temperature critical high alarm.
+
+fan[1-4]_input		Fan RPM.
+fan[1-4]_alarm		Fan alarm.
+fan[1-4]_fault		Fan fault.
+
+			Fan attributes are only available on chips supporting
+			fan control (UCD90124, UCD90910). Attribute files are
+			created only for enabled fans.
+			Note that even though UCD90910 supports up to 10 fans,
+			only up to four fans are currently supported.

Documentation/hwmon/ucd9200

+Kernel driver ucd9200
+=====================
+
+Supported chips:
+  * TI UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248
+    Prefixes: 'ucd9220', 'ucd9222', 'ucd9224', 'ucd9240', 'ucd9244', 'ucd9246',
+	'ucd9248'
+    Addresses scanned: -
+    Datasheets:
+	http://focus.ti.com/lit/ds/symlink/ucd9220.pdf
+	http://focus.ti.com/lit/ds/symlink/ucd9222.pdf
+	http://focus.ti.com/lit/ds/symlink/ucd9224.pdf
+	http://focus.ti.com/lit/ds/symlink/ucd9240.pdf
+	http://focus.ti.com/lit/ds/symlink/ucd9244.pdf
+	http://focus.ti.com/lit/ds/symlink/ucd9246.pdf
+	http://focus.ti.com/lit/ds/symlink/ucd9248.pdf
+
+Author: Guenter Roeck <guenter.roeck@ericsson.com>
+
+
+Description
+-----------
+
+[From datasheets] UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and
+UCD9248 are multi-rail, multi-phase synchronous buck digital PWM controllers
+designed for non-isolated DC/DC power applications. The devices integrate
+dedicated circuitry for DC/DC loop management with flash memory and a serial
+interface to support configuration, monitoring and management.
+
+This driver is a client driver to the core PMBus driver. Please see
+Documentation/hwmon/pmbus for details on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices for
+details.
+
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data. Please see
+Documentation/hwmon/pmbus for details.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported. Limits are read-write; all other
+attributes are read-only.
+
+in1_label		"vin".
+in1_input		Measured voltage. From READ_VIN register.
+in1_min			Minumum Voltage. From VIN_UV_WARN_LIMIT register.
+in1_max			Maximum voltage. From VIN_OV_WARN_LIMIT register.
+in1_lcrit		Critical minumum Voltage. VIN_UV_FAULT_LIMIT register.
+in1_crit		Critical maximum voltage. From VIN_OV_FAULT_LIMIT register.
+in1_min_alarm		Voltage low alarm. From VIN_UV_WARNING status.
+in1_max_alarm		Voltage high alarm. From VIN_OV_WARNING status.
+in1_lcrit_alarm		Voltage critical low alarm. From VIN_UV_FAULT status.
+in1_crit_alarm		Voltage critical high alarm. From VIN_OV_FAULT status.
+
+in[2-5]_label		"vout[1-4]".
+in[2-5]_input		Measured voltage. From READ_VOUT register.
+in[2-5]_min		Minumum Voltage. From VOUT_UV_WARN_LIMIT register.
+in[2-5]_max		Maximum voltage. From VOUT_OV_WARN_LIMIT register.
+in[2-5]_lcrit		Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register.
+in[2-5]_crit		Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register.
+in[2-5]_min_alarm	Voltage low alarm. From VOLTAGE_UV_WARNING status.
+in[2-5]_max_alarm	Voltage high alarm. From VOLTAGE_OV_WARNING status.
+in[2-5]_lcrit_alarm	Voltage critical low alarm. From VOLTAGE_UV_FAULT status.
+in[2-5]_crit_alarm	Voltage critical high alarm. From VOLTAGE_OV_FAULT status.
+
+curr1_label		"iin".
+curr1_input		Measured current. From READ_IIN register.
+
+curr[2-5]_label		"iout[1-4]".
+curr[2-5]_input		Measured current. From READ_IOUT register.
+curr[2-5]_max		Maximum current. From IOUT_OC_WARN_LIMIT register.
+curr[2-5]_lcrit		Critical minumum output current. From IOUT_UC_FAULT_LIMIT
+			register.
+curr[2-5]_crit		Critical maximum current. From IOUT_OC_FAULT_LIMIT register.
+curr[2-5]_max_alarm	Current high alarm. From IOUT_OC_WARNING status.
+curr[2-5]_crit_alarm	Current critical high alarm. From IOUT_OC_FAULT status.
+
+power1_input		Measured input power. From READ_PIN register.
+power1_label		"pin"
+
+power[2-5]_input	Measured output power. From READ_POUT register.
+power[2-5]_label	"pout[1-4]"
+
+			The number of output voltage, current, and power
+			attribute sets is determined by the number of enabled
+			rails. See chip datasheets for details.
+
+temp[1-5]_input		Measured temperatures. From READ_TEMPERATURE_1 and
+		        READ_TEMPERATURE_2 registers.
+			temp1 is the chip internal temperature. temp[2-5] are
+			rail temperatures.  temp[2-5] attributes are only
+			created for enabled rails. See chip datasheets for
+			details.
+temp[1-5]_max		Maximum temperature. From OT_WARN_LIMIT register.
+temp[1-5]_crit		Critical high temperature. From OT_FAULT_LIMIT register.
+temp[1-5]_max_alarm	Temperature high alarm.
+temp[1-5]_crit_alarm	Temperature critical high alarm.
+
+fan1_input		Fan RPM. ucd9240 only.
+fan1_alarm		Fan alarm. ucd9240 only.
+fan1_fault		Fan fault. ucd9240 only.

Documentation/ioctl/ioctl-number.txt

@@ -166,7 +166,6 @@ Code  Seq#(hex)	Include File		Comments
 'T'	all	arch/x86/include/asm/ioctls.h	conflict!
 'T'	C0-DF	linux/if_tun.h		conflict!
 'U'	all	sound/asound.h		conflict!
-'U'	00-0F	drivers/media/video/uvc/uvcvideo.h	conflict!
 'U'	00-CF	linux/uinput.h		conflict!
 'U'	00-EF	linux/usbdevice_fs.h
 'U'	C0-CF	drivers/bluetooth/hci_uart.h
@@ -259,6 +258,7 @@ Code  Seq#(hex)	Include File		Comments
 't'	80-8F	linux/isdn_ppp.h
 't'	90	linux/toshiba.h
 'u'	00-1F	linux/smb_fs.h		gone
+'u'	20-3F	linux/uvcvideo.h	USB video class host driver
 'v'	00-1F	linux/ext2_fs.h		conflict!
 'v'	00-1F	linux/fs.h		conflict!
 'v'	00-0F	linux/sonypi.h		conflict!

Documentation/ja_JP/HOWTO

@@ -11,14 +11,14 @@ for non English (read: Japanese) speakers and is not intended as a
 fork. So if you have any comments or updates for this file, please try
 to update the original English file first.
 
-Last Updated: 2008/10/24
+Last Updated: 2011/03/31
 ==================================
 これは、
-linux-2.6.28/Documentation/HOWTO
+linux-2.6.38/Documentation/HOWTO
 の和訳です。
 
 翻訳団体： JF プロジェクト < http://www.linux.or.jp/JF/ >
-翻訳日： 2008/10/24
+翻訳日： 2011/3/28
 翻訳者： Tsugikazu Shibata <tshibata at ab dot jp dot nec dot com>
 校正者： 松倉さん <nbh--mats at nifty dot com>
          小林 雅典さん (Masanori Kobayasi) <zap03216 at nifty dot ne dot jp>
@@ -256,8 +256,8 @@ Linux カーネルの開発プロセスは現在幾つかの異なるメイン
   - メインの 2.6.x カーネルツリー
   - 2.6.x.y -stable カーネルツリー
   - 2.6.x -git カーネルパッチ
-  - 2.6.x -mm カーネルパッチ
   - サブシステム毎のカーネルツリーとパッチ
+  - 統合テストのための 2.6.x -next カーネルツリー
 
 2.6.x カーネルツリー
 -----------------
@@ -268,9 +268,9 @@ Linux カーネルの開発プロセスは現在幾つかの異なるメイン
 
   - 新しいカーネルがリリースされた直後に、2週間の特別期間が設けられ、
     この期間中に、メンテナ達は Linus に大きな差分を送ることができます。
-    このような差分は通常 -mm カーネルに数週間含まれてきたパッチです。
+    このような差分は通常 -next カーネルに数週間含まれてきたパッチです。
     大きな変更は git(カーネルのソース管理ツール、詳細は
-    http://git.or.cz/  参照) を使って送るのが好ましいやり方ですが、パッ
+    http://git-scm.com/  参照) を使って送るのが好ましいやり方ですが、パッ
     チファイルの形式のまま送るのでも十分です。
 
   - 2週間後、-rc1 カーネルがリリースされ、この後にはカーネル全体の安定
@@ -333,86 +333,44 @@ git リポジトリで管理されているLinus のカーネルツリーの毎
 れは -rc カーネルと比べて、パッチが大丈夫かどうかも確認しないで自動的
 に生成されるので、より実験的です。
 
-2.6.x -mm カーネルパッチ
-------------------------
-
-Andrew Morton によってリリースされる実験的なカーネルパッチ群です。
-Andrew は個別のサブシステムカーネルツリーとパッチを全て集めてきて
-linux-kernel メーリングリストで収集された多数のパッチと同時に一つにま
-とめます。
-このツリーは新機能とパッチが検証される場となります。ある期間の間パッチ
-が -mm に入って価値を証明されたら、Andrew やサブシステムメンテナが、
-メインラインへ入れるように Linus にプッシュします。
-
-メインカーネルツリーに含めるために Linus に送る前に、すべての新しいパッ
-チが -mm ツリーでテストされることが強く推奨されています。マージウィン
-ドウが開く前に -mm ツリーに現れなかったパッチはメインラインにマージさ
-れることは困難になります。
-
-これらのカーネルは安定して動作すべきシステムとして使うのには適切ではあ
-りませんし、カーネルブランチの中でももっとも動作にリスクが高いものです。
-
-もしあなたが、カーネル開発プロセスの支援をしたいと思っているのであれば、
-どうぞこれらのカーネルリリースをテストに使ってみて、そしてもし問題があ
-れば、またもし全てが正しく動作したとしても、linux-kernel メーリングリ
-ストにフィードバックを提供してください。
-
-すべての他の実験的パッチに加えて、これらのカーネルは通常リリース時点で
-メインラインの -git カーネルに含まれる全ての変更も含んでいます。
-
--mm カーネルは決まったスケジュールではリリースされません、しかし通常幾
-つかの -mm カーネル (1 から 3 が普通）が各-rc カーネルの間にリリースさ
-れます。
-
 サブシステム毎のカーネルツリーとパッチ
 -------------------------------------------
 
-カーネルの様々な領域で何が起きているかを見られるようにするため、多くの
-カーネルサブシステム開発者は彼らの開発ツリーを公開しています。これらの
-ツリーは説明したように -mm カーネルリリースに入れ込まれます。
-
-以下はさまざまなカーネルツリーの中のいくつかのリスト-
-
-  git ツリー-
-    - Kbuild の開発ツリー、Sam Ravnborg <sam@ravnborg.org>
-	git.kernel.org:/pub/scm/linux/kernel/git/sam/kbuild.git
-
-    - ACPI の開発ツリー、 Len Brown <len.brown@intel.com>
-	git.kernel.org:/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git
-
-    - Block の開発ツリー、Jens Axboe <axboe@suse.de>
-	git.kernel.org:/pub/scm/linux/kernel/git/axboe/linux-2.6-block.git
-
-    - DRM の開発ツリー、Dave Airlie <airlied@linux.ie>
-	git.kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6.git
-
-    - ia64 の開発ツリー、Tony Luck <tony.luck@intel.com>
-	git.kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6.git
-
-    - infiniband, Roland Dreier <rolandd@cisco.com>
-	git.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband.git
-
-    - libata, Jeff Garzik <jgarzik@pobox.com>
-	git.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
-
-    - ネットワークドライバ, Jeff Garzik <jgarzik@pobox.com>
-	git.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git
-
-    - pcmcia, Dominik Brodowski <linux@dominikbrodowski.net>
-	git.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git
-
-    - SCSI, James Bottomley <James.Bottomley@hansenpartnership.com>
-	git.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
-
-    - x86, Ingo Molnar <mingo@elte.hu>
-	git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
-
-  quilt ツリー-
-    - USB, ドライバコアと I2C, Greg Kroah-Hartman <gregkh@suse.de>
-	kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
+それぞれのカーネルサブシステムのメンテナ達は --- そして多くのカーネル
+サブシステムの開発者達も --- 各自の最新の開発状況をソースリポジトリに
+公開しています。そのため、自分とは異なる領域のカーネルで何が起きている
+かを他の人が見られるようになっています。開発が早く進んでいる領域では、
+開発者は自身の投稿がどのサブシステムカーネルツリーを元にしているか質問
+されるので、その投稿とすでに進行中の他の作業との衝突が避けられます。
+
+大部分のこれらのリポジトリは git ツリーです。しかしその他の SCM や
+quilt シリーズとして公開されているパッチキューも使われています。これら
+のサブシステムリポジトリのアドレスは MAINTAINERS ファイルにリストされ
+ています。これらの多くは http://git.kernel.org/ で参照することができま
+す。
 
-  その他のカーネルツリーは http://git.kernel.org/ と MAINTAINERS ファ
-  イルに一覧表があります。
+提案されたパッチがこのようなサブシステムツリーにコミットされる前に、メー
+リングリストで事前にレビューにかけられます（以下の対応するセクションを
+参照）。いくつかのカーネルサブシステムでは、このレビューは patchwork
+というツールによって追跡されます。Patchwork は web インターフェイスに
+よってパッチ投稿の表示、パッチへのコメント付けや改訂などができ、そして
+メンテナはパッチに対して、レビュー中、受付済み、拒否というようなマーク
+をつけることができます。大部分のこれらの patchwork のサイトは
+http://patchwork.kernel.org/ でリストされています。
+
+統合テストのための 2.6.x -next カーネルツリー
+---------------------------------------------
+
+サブシステムツリーの更新内容がメインラインの 2.6.x ツリーにマージされ
+る前に、それらは統合テストされる必要があります。この目的のため、実質的
+に全サブシステムツリーからほぼ毎日プルされてできる特別なテスト用のリ
+ポジトリが存在します-
+       http://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git
+       http://linux.f-seidel.de/linux-next/pmwiki/
+
+このやり方によって、-next カーネルは次のマージ機会でどんなものがメイン
+ラインカーネルにマージされるか、おおまかなの展望を提供します。-next 
+カーネルの実行テストを行う冒険好きなテスターは大いに歓迎されます
 
 バグレポート
 -------------
@@ -673,10 +631,9 @@ Linux カーネルコミュニティは、一度に大量のコードの塊を
 じところからスタートしたのですから。
 
 Paolo Ciarrocchi に感謝、彼は彼の書いた "Development Process"
-(http://linux.tar.bz/articles/2.6-development_process)セクショ
-ンをこのテキストの原型にすることを許可してくれました。
-Rundy Dunlap と Gerrit Huizenga はメーリングリストでやるべきこととやっ
-てはいけないことのリストを提供してくれました。
+(http://lwn.net/Articles/94386/) セクションをこのテキストの原型にする
+ことを許可してくれました。Rundy Dunlap と Gerrit Huizenga はメーリング
+リストでやるべきこととやってはいけないことのリストを提供してくれました。
 以下の人々のレビュー、コメント、貢献に感謝。
 Pat Mochel, Hanna Linder, Randy Dunlap, Kay Sievers,
 Vojtech Pavlik, Jan Kara, Josh Boyer, Kees Cook, Andrew Morton, Andi

Documentation/kernel-parameters.txt

@@ -245,7 +245,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 
 	acpi_sleep=	[HW,ACPI] Sleep options
 			Format: { s3_bios, s3_mode, s3_beep, s4_nohwsig,
-				  old_ordering, s4_nonvs, sci_force_enable }
+				  old_ordering, nonvs, sci_force_enable }
 			See Documentation/power/video.txt for information on
 			s3_bios and s3_mode.
 			s3_beep is for debugging; it makes the PC's speaker beep
@@ -1664,6 +1664,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			noexec=on: enable non-executable mappings (default)
 			noexec=off: disable non-executable mappings
 
+	nosmep		[X86]
+			Disable SMEP (Supervisor Mode Execution Protection)
+			even if it is supported by processor.
+
 	noexec32	[X86-64]
 			This affects only 32-bit executables.
 			noexec32=on: enable non-executable mappings (default)
@@ -2581,6 +2585,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 					bytes of sense data);
 				c = FIX_CAPACITY (decrease the reported
 					device capacity by one sector);
+				d = NO_READ_DISC_INFO (don't use
+					READ_DISC_INFO command);
+				e = NO_READ_CAPACITY_16 (don't use
+					READ_CAPACITY_16 command);
 				h = CAPACITY_HEURISTICS (decrease the
 					reported device capacity by one
 					sector if the number is odd);

Documentation/kvm/review-checklist.txt

-Review checklist for kvm patches
-================================
-
-1.  The patch must follow Documentation/CodingStyle and
-    Documentation/SubmittingPatches.
-
-2.  Patches should be against kvm.git master branch.
-
-3.  If the patch introduces or modifies a new userspace API:
-    - the API must be documented in Documentation/kvm/api.txt
-    - the API must be discoverable using KVM_CHECK_EXTENSION
-
-4.  New state must include support for save/restore.
-
-5.  New features must default to off (userspace should explicitly request them).
-    Performance improvements can and should default to on.
-
-6.  New cpu features should be exposed via KVM_GET_SUPPORTED_CPUID2
-
-7.  Emulator changes should be accompanied by unit tests for qemu-kvm.git
-    kvm/test directory.
-
-8.  Changes should be vendor neutral when possible.  Changes to common code
-    are better than duplicating changes to vendor code.
-
-9.  Similarly, prefer changes to arch independent code than to arch dependent
-    code.
-
-10. User/kernel interfaces and guest/host interfaces must be 64-bit clean
-    (all variables and sizes naturally aligned on 64-bit; use specific types
-    only - u64 rather than ulong).
-
-11. New guest visible features must either be documented in a hardware manual
-    or be accompanied by documentation.
-
-12. Features must be robust against reset and kexec - for example, shared
-    host/guest memory must be unshared to prevent the host from writing to
-    guest memory that the guest has not reserved for this purpose.

Documentation/lguest/lguest.txt

-      __
- (___()'`;  Rusty's Remarkably Unreliable Guide to Lguest
- /,    /`      - or, A Young Coder's Illustrated Hypervisor
- \\"--\\    http://lguest.ozlabs.org
-
-Lguest is designed to be a minimal 32-bit x86 hypervisor for the Linux kernel,
-for Linux developers and users to experiment with virtualization with the
-minimum of complexity.  Nonetheless, it should have sufficient features to
-make it useful for specific tasks, and, of course, you are encouraged to fork
-and enhance it (see drivers/lguest/README).
-
-Features:
-
-- Kernel module which runs in a normal kernel.
-- Simple I/O model for communication.
-- Simple program to create new guests.
-- Logo contains cute puppies: http://lguest.ozlabs.org
-
-Developer features:
-
-- Fun to hack on.
-- No ABI: being tied to a specific kernel anyway, you can change anything.
-- Many opportunities for improvement or feature implementation.
-
-Running Lguest:
-
-- The easiest way to run lguest is to use same kernel as guest and host.
-  You can configure them differently, but usually it's easiest not to.
-
-  You will need to configure your kernel with the following options:
-
-  "General setup":
-     "Prompt for development and/or incomplete code/drivers" = Y
-        (CONFIG_EXPERIMENTAL=y)
-
-  "Processor type and features":
-     "Paravirtualized guest support" = Y
-        "Lguest guest support" = Y
-     "High Memory Support" = off/4GB
-     "Alignment value to which kernel should be aligned" = 0x100000
-        (CONFIG_PARAVIRT=y, CONFIG_LGUEST_GUEST=y, CONFIG_HIGHMEM64G=n and
-         CONFIG_PHYSICAL_ALIGN=0x100000)
-
-  "Device Drivers":
-     "Block devices"
-        "Virtio block driver (EXPERIMENTAL)" = M/Y
-     "Network device support"
-        "Universal TUN/TAP device driver support" = M/Y
-        "Virtio network driver (EXPERIMENTAL)" = M/Y
-           (CONFIG_VIRTIO_BLK=m, CONFIG_VIRTIO_NET=m and CONFIG_TUN=m)
-
-  "Virtualization"
-     "Linux hypervisor example code" = M/Y
-        (CONFIG_LGUEST=m)
-
-- A tool called "lguest" is available in this directory: type "make"
-  to build it.  If you didn't build your kernel in-tree, use "make
-  O=<builddir>".
-
-- Create or find a root disk image.  There are several useful ones
-  around, such as the xm-test tiny root image at
-	  http://xm-test.xensource.com/ramdisks/initrd-1.1-i386.img
-
-  For more serious work, I usually use a distribution ISO image and
-  install it under qemu, then make multiple copies:
-
-	  dd if=/dev/zero of=rootfile bs=1M count=2048
-	  qemu -cdrom image.iso -hda rootfile -net user -net nic -boot d
-
-  Make sure that you install a getty on /dev/hvc0 if you want to log in on the
-  console!
-
-- "modprobe lg" if you built it as a module.
-
-- Run an lguest as root:
-
-      Documentation/lguest/lguest 64 vmlinux --tunnet=192.168.19.1 --block=rootfile root=/dev/vda
-
-   Explanation:
-    64: the amount of memory to use, in MB.
-
-    vmlinux: the kernel image found in the top of your build directory.  You
-       can also use a standard bzImage.
-
-    --tunnet=192.168.19.1: configures a "tap" device for networking with this
-       IP address.
-
-    --block=rootfile: a file or block device which becomes /dev/vda
-       inside the guest.
-
-    root=/dev/vda: this (and anything else on the command line) are
-       kernel boot parameters.
-
-- Configuring networking.  I usually have the host masquerade, using
-  "iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE" and "echo 1 >
-  /proc/sys/net/ipv4/ip_forward".  In this example, I would configure
-  eth0 inside the guest at 192.168.19.2.
-
-  Another method is to bridge the tap device to an external interface
-  using --tunnet=bridge:<bridgename>, and perhaps run dhcp on the guest
-  to obtain an IP address.  The bridge needs to be configured first:
-  this option simply adds the tap interface to it.
-
-  A simple example on my system:
-
-    ifconfig eth0 0.0.0.0
-    brctl addbr lg0
-    ifconfig lg0 up
-    brctl addif lg0 eth0
-    dhclient lg0
-
-  Then use --tunnet=bridge:lg0 when launching the guest.
-
-  See:
-  
-    http://www.linuxfoundation.org/collaborate/workgroups/networking/bridge
-    
-  for general information on how to get bridging to work.
-
-- Random number generation. Using the --rng option will provide a
-  /dev/hwrng in the guest that will read from the host's /dev/random.
-  Use this option in conjunction with rng-tools (see ../hw_random.txt)
-  to provide entropy to the guest kernel's /dev/random.
-
-There is a helpful mailing list at http://ozlabs.org/mailman/listinfo/lguest
-
-Good luck!
-Rusty Russell rusty@rustcorp.com.au.

Documentation/networking/batman-adv.txt

-[state: 27-01-2011]
+[state: 17-04-2011]
 
 BATMAN-ADV
 ----------
@@ -19,6 +19,7 @@ duce the overhead to a minimum. It does not depend on any (other)
 network driver, and can be used on wifi as well as ethernet  lan,
 vpn,  etc ... (anything with ethernet-style layer 2).
 
+
 CONFIGURATION
 -------------
 
@@ -160,13 +161,13 @@ face.  Each  entry can/has to have the following values:
 -> "TQ mac  value"  -  src mac's link quality towards mac address
                        of a neighbor originator's interface which
                        is being used for routing
--> "HNA mac" - HNA announced by source mac
+-> "TT mac" - TT announced by source mac
 -> "PRIMARY" - this  is a primary interface
 -> "SEC mac" - secondary mac address of source
                (requires preceding PRIMARY)
 
 The TQ value has a range from 4 to 255 with 255 being  the  best.
-The HNA entries are showing which hosts are connected to the mesh
+The TT entries are showing which hosts are connected to the mesh
 via bat0 or being bridged into the mesh network.  The PRIMARY/SEC
 values are only applied on primary interfaces
 
@@ -199,7 +200,7 @@ abled  during run time. Following log_levels are defined:
 
 0 - All  debug  output  disabled
 1 - Enable messages related to routing / flooding / broadcasting
-2 - Enable route or hna added / changed / deleted
+2 - Enable route or tt entry added / changed / deleted
 3 - Enable all messages
 
 The debug output can be changed at runtime  using  the  file
@@ -207,7 +208,7 @@ The debug output can be changed at runtime  using  the  file
 
 # echo 2 > /sys/class/net/bat0/mesh/log_level
 
-will enable debug messages for when routes or HNAs change.
+will enable debug messages for when routes or TTs change.
 
 
 BATCTL

Documentation/networking/bonding.txt

 
 		Linux Ethernet Bonding Driver HOWTO
 
-		Latest update: 23 September 2009
+		Latest update: 27 April 2011
 
 Initial release : Thomas Davis <tadavis at lbl.gov>
 Corrections, HA extensions : 2000/10/03-15 :
@@ -585,25 +585,23 @@ mode
 		chosen.
 
 num_grat_arp
-
-	Specifies the number of gratuitous ARPs to be issued after a
-	failover event.  One gratuitous ARP is issued immediately after
-	the failover, subsequent ARPs are sent at a rate of one per link
-	monitor interval (arp_interval or miimon, whichever is active).
-
-	The valid range is 0 - 255; the default value is 1.  This option
-	affects only the active-backup mode.  This option was added for
-	bonding version 3.3.0.
-
 num_unsol_na
 
-	Specifies the number of unsolicited IPv6 Neighbor Advertisements
-	to be issued after a failover event.  One unsolicited NA is issued
-	immediately after the failover.
-
-	The valid range is 0 - 255; the default value is 1.  This option
-	affects only the active-backup mode.  This option was added for
-	bonding version 3.4.0.
+	Specify the number of peer notifications (gratuitous ARPs and
+	unsolicited IPv6 Neighbor Advertisements) to be issued after a
+	failover event.  As soon as the link is up on the new slave
+	(possibly immediately) a peer notification is sent on the
+	bonding device and each VLAN sub-device.  This is repeated at
+	each link monitor interval (arp_interval or miimon, whichever
+	is active) if the number is greater than 1.
+
+	The valid range is 0 - 255; the default value is 1.  These options
+	affect only the active-backup mode.  These options were added for
+	bonding versions 3.3.0 and 3.4.0 respectively.
+
+	From Linux 2.6.40 and bonding version 3.7.1, these notifications
+	are generated by the ipv4 and ipv6 code and the numbers of
+	repetitions cannot be set independently.
 
 primary
 

Documentation/networking/igb.txt

@@ -93,6 +93,19 @@ Additional Configurations
   REQUIREMENTS: MSI-X support is required for Multiqueue. If MSI-X is not
   found, the system will fallback to MSI or to Legacy interrupts.
 
+  MAC and VLAN anti-spoofing feature
+  ----------------------------------
+  When a malicious driver attempts to send a spoofed packet, it is dropped by
+  the hardware and not transmitted.  An interrupt is sent to the PF driver
+  notifying it of the spoof attempt.
+
+  When a spoofed packet is detected the PF driver will send the following
+  message to the system log (displayed by  the "dmesg" command):
+
+  Spoof event(s) detected on VF(n)
+
+  Where n=the VF that attempted to do the spoofing.
+
 Support
 =======
 

Documentation/power/devices.txt

@@ -279,11 +279,15 @@ When the system goes into the standby or memory sleep state, the phases are:
 	time.)  Unlike the other suspend-related phases, during the prepare
 	phase the device tree is traversed top-down.
 
-	The prepare phase uses only a bus callback.  After the callback method
-	returns, no new children may be registered below the device.  The method
-	may also prepare the device or driver in some way for the upcoming
-	system power transition, but it should not put the device into a
-	low-power state.
+	In addition to that, if device drivers need to allocate additional
+	memory to be able to hadle device suspend correctly, that should be
+	done in the prepare phase.
+
+	After the prepare callback method returns, no new children may be
+	registered below the device.  The method may also prepare the device or
+	driver in some way for the upcoming system power transition (for
+	example, by allocating additional memory required for this purpose), but
+	it should not put the device into a low-power state.
 
     2.	The suspend methods should quiesce the device to stop it from performing
 	I/O.  They also may save the device registers and put it into the

Documentation/power/notifiers.txt

 Suspend notifiers
-	(C) 2007 Rafael J. Wysocki <rjw@sisk.pl>, GPL
-
-There are some operations that device drivers may want to carry out in their
-.suspend() routines, but shouldn't, because they can cause the hibernation or
-suspend to fail. For example, a driver may want to allocate a substantial amount
-of memory (like 50 MB) in .suspend(), but that shouldn't be done after the
-swsusp's memory shrinker has run.
-
-Also, there may be some operations, that subsystems want to carry out before a
-hibernation/suspend or after a restore/resume, requiring the system to be fully
-functional, so the drivers' .suspend() and .resume() routines are not suitable
-for this purpose.  For example, device drivers may want to upload firmware to
-their devices after a restore from a hibernation image, but they cannot do it by
-calling request_firmware() from their .resume() routines (user land processes
-are frozen at this point).  The solution may be to load the firmware into
-memory before processes are frozen and upload it from there in the .resume()
-routine.  Of course, a hibernation notifier may be used for this purpose.
-
-The subsystems that have such needs can register suspend notifiers that will be
-called upon the following events by the suspend core:
+	(C) 2007-2011 Rafael J. Wysocki <rjw@sisk.pl>, GPL
+
+There are some operations that subsystems or drivers may want to carry out
+before hibernation/suspend or after restore/resume, but they require the system
+to be fully functional, so the drivers' and subsystems' .suspend() and .resume()
+or even .prepare() and .complete() callbacks are not suitable for this purpose.
+For example, device drivers may want to upload firmware to their devices after
+resume/restore, but they cannot do it by calling request_firmware() from their
+.resume() or .complete() routines (user land processes are frozen at these
+points).  The solution may be to load the firmware into memory before processes
+are frozen and upload it from there in the .resume() routine.
+A suspend/hibernation notifier may be used for this purpose.
+
+The subsystems or drivers having such needs can register suspend notifiers that
+will be called upon the following events by the PM core:
 
 PM_HIBERNATION_PREPARE	The system is going to hibernate or suspend, tasks will
 			be frozen immediately.
 
 PM_POST_HIBERNATION	The system memory state has been restored from a
-			hibernation image or an error occurred during the
-			hibernation.  Device drivers' .resume() callbacks have
+			hibernation image or an error occurred during
+			hibernation.  Device drivers' restore callbacks have
 			been executed and tasks have been thawed.
 
 PM_RESTORE_PREPARE	The system is going to restore a hibernation image.
-			If all goes well the restored kernel will issue a
+			If all goes well, the restored kernel will issue a
 			PM_POST_HIBERNATION notification.
 
-PM_POST_RESTORE		An error occurred during the hibernation restore.
-			Device drivers' .resume() callbacks have been executed
+PM_POST_RESTORE		An error occurred during restore from hibernation.
+			Device drivers' restore callbacks have been executed
 			and tasks have been thawed.
 
-PM_SUSPEND_PREPARE	The system is preparing for a suspend.
+PM_SUSPEND_PREPARE	The system is preparing for suspend.
 
 PM_POST_SUSPEND		The system has just resumed or an error occurred during
-			the suspend.	Device drivers' .resume() callbacks have
-			been executed and tasks have been thawed.
+			suspend.  Device drivers' resume callbacks have been
+			executed and tasks have been thawed.
 
 It is generally assumed that whatever the notifiers do for
 PM_HIBERNATION_PREPARE, should be undone for PM_POST_HIBERNATION.  Analogously,

Documentation/pti/pti_intel_mid.txt

+The Intel MID PTI project is HW implemented in Intel Atom
+system-on-a-chip designs based on the Parallel Trace
+Interface for MIPI P1149.7 cJTAG standard.  The kernel solution
+for this platform involves the following files:
+
+./include/linux/pti.h
+./drivers/.../n_tracesink.h
+./drivers/.../n_tracerouter.c
+./drivers/.../n_tracesink.c
+./drivers/.../pti.c
+
+pti.c is the driver that enables various debugging features
+popular on platforms from certain mobile manufacturers.
+n_tracerouter.c and n_tracesink.c allow extra system information to
+be collected and routed to the pti driver, such as trace
+debugging data from a modem.  Although n_tracerouter
+and n_tracesink are a part of the complete PTI solution,
+these two line disciplines can work separately from
+pti.c and route any data stream from one /dev/tty node
+to another /dev/tty node via kernel-space.  This provides
+a stable, reliable connection that will not break unless
+the user-space application shuts down (plus avoids
+kernel->user->kernel context switch overheads of routing
+data).
+
+An example debugging usage for this driver system:
+   *Hook /dev/ttyPTI0 to syslogd.  Opening this port will also start
+    a console device to further capture debugging messages to PTI.
+   *Hook /dev/ttyPTI1 to modem debugging data to write to PTI HW.
+    This is where n_tracerouter and n_tracesink are used.
+   *Hook /dev/pti to a user-level debugging application for writing
+    to PTI HW.
+   *Use mipi_* Kernel Driver API in other device drivers for
+    debugging to PTI by first requesting a PTI write address via
+    mipi_request_masterchannel(1).
+
+Below is example pseudo-code on how a 'privileged' application
+can hook up n_tracerouter and n_tracesink to any tty on
+a system.  'Privileged' means the application has enough
+privileges to successfully manipulate the ldisc drivers
+but is not just blindly executing as 'root'. Keep in mind
+the use of ioctl(,TIOCSETD,) is not specific to the n_tracerouter
+and n_tracesink line discpline drivers but is a generic
+operation for a program to use a line discpline driver
+on a tty port other than the default n_tty.
+
+/////////// To hook up n_tracerouter and n_tracesink /////////
+
+// Note that n_tracerouter depends on n_tracesink.
+#include <errno.h>
+#define ONE_TTY "/dev/ttyOne"
+#define TWO_TTY "/dev/ttyTwo"
+
+// needed global to hand onto ldisc connection
+static int g_fd_source = -1;
+static int g_fd_sink  = -1;
+
+// these two vars used to grab LDISC values from loaded ldisc drivers
+// in OS.  Look at /proc/tty/ldiscs to get the right numbers from
+// the ldiscs loaded in the system.
+int source_ldisc_num, sink_ldisc_num = -1;
+int retval;
+
+g_fd_source = open(ONE_TTY, O_RDWR); // must be R/W
+g_fd_sink   = open(TWO_TTY, O_RDWR); // must be R/W
+
+if (g_fd_source <= 0) || (g_fd_sink <= 0) {
+   // doubt you'll want to use these exact error lines of code
+   printf("Error on open(). errno: %d\n",errno);
+   return errno;
+}
+
+retval = ioctl(g_fd_sink, TIOCSETD, &sink_ldisc_num);
+if (retval < 0) {
+   printf("Error on ioctl().  errno: %d\n", errno);
+   return errno;
+}
+
+retval = ioctl(g_fd_source, TIOCSETD, &source_ldisc_num);
+if (retval < 0) {
+   printf("Error on ioctl().  errno: %d\n", errno);
+   return errno;
+}
+
+/////////// To disconnect n_tracerouter and n_tracesink ////////
+
+// First make sure data through the ldiscs has stopped.
+
+// Second, disconnect ldiscs.  This provides a
+// little cleaner shutdown on tty stack.
+sink_ldisc_num = 0;
+source_ldisc_num = 0;
+ioctl(g_fd_uart, TIOCSETD, &sink_ldisc_num);
+ioctl(g_fd_gadget, TIOCSETD, &source_ldisc_num);
+
+// Three, program closes connection, and cleanup:
+close(g_fd_uart);
+close(g_fd_gadget);
+g_fd_uart = g_fd_gadget = NULL;

Documentation/scsi/LICENSE.qla2xxx

-Copyright (c)  2003-2005 QLogic Corporation
-QLogic Linux Fibre Channel HBA Driver
+Copyright (c) 2003-2011 QLogic Corporation
+QLogic Linux/ESX Fibre Channel HBA Driver
 
-This program includes a device driver for Linux 2.6 that may be
+This program includes a device driver for Linux 2.6/ESX that may be
 distributed with QLogic hardware specific firmware binary file.
 You may modify and redistribute the device driver code under the
-GNU General Public License as published by the Free Software
-Foundation (version 2 or a later version).
+GNU General Public License (a copy of which is attached hereto as
+Exhibit A) published by the Free Software Foundation (version 2).
 
 You may redistribute the hardware specific firmware binary file
 under the following terms:
@@ -43,3 +43,285 @@ OTHERWISE IN ANY INTELLECTUAL PROPERTY RIGHTS (PATENT, COPYRIGHT,
 TRADE SECRET, MASK WORK, OR OTHER PROPRIETARY RIGHT) EMBODIED IN
 ANY OTHER QLOGIC HARDWARE OR SOFTWARE EITHER SOLELY OR IN
 COMBINATION WITH THIS PROGRAM.
+
+
+EXHIBIT A
+
+		    GNU GENERAL PUBLIC LICENSE
+		       Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+ 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+			    Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users.  This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it.  (Some other Free Software Foundation software is covered by
+the GNU Lesser General Public License instead.)  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+  To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have.  You must make sure that they, too, receive or can get the
+source code.  And you must show them these terms so they know their
+rights.
+
+  We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+  Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software.  If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+  Finally, any free program is threatened constantly by software
+patents.  We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary.  To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+		    GNU GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License.  The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language.  (Hereinafter, translation is included without limitation in
+the term "modification".)  Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+  1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+  2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) You must cause the modified files to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    b) You must cause any work that you distribute or publish, that in
+    whole or in part contains or is derived from the Program or any
+    part thereof, to be licensed as a whole at no charge to all third
+    parties under the terms of this License.
+
+    c) If the modified program normally reads commands interactively
+    when run, you must cause it, when started running for such
+    interactive use in the most ordinary way, to print or display an
+    announcement including an appropriate copyright notice and a
+    notice that there is no warranty (or else, saying that you provide
+    a warranty) and that users may redistribute the program under
+    these conditions, and telling the user how to view a copy of this
+    License.  (Exception: if the Program itself is interactive but
+    does not normally print such an announcement, your work based on
+    the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+    a) Accompany it with the complete corresponding machine-readable
+    source code, which must be distributed under the terms of Sections
+    1 and 2 above on a medium customarily used for software interchange; or,
+
+    b) Accompany it with a written offer, valid for at least three
+    years, to give any third party, for a charge no more than your
+    cost of physically performing source distribution, a complete
+    machine-readable copy of the corresponding source code, to be
+    distributed under the terms of Sections 1 and 2 above on a medium
+    customarily used for software interchange; or,
+
+    c) Accompany it with the information you received as to the offer
+    to distribute corresponding source code.  (This alternative is
+    allowed only for noncommercial distribution and only if you
+    received the program in object code or executable form with such
+    an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it.  For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable.  However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+  5. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Program or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+  6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+  7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded.  In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+  9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation.  If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+  10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission.  For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this.  Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+			    NO WARRANTY
+
+  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.

Documentation/sound/alsa/ALSA-Configuration.txt

@@ -1230,6 +1230,13 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     This module supports multiple cards.
     The driver requires the firmware loader support on kernel.
 
+  Module snd-lola
+  ---------------
+
+    Module for Digigram Lola PCI-e boards
+
+    This module supports multiple cards.
+
   Module snd-lx6464es
   -------------------
 

Documentation/sound/alsa/HD-Audio-Models.txt

@@ -94,7 +94,7 @@ ALC662/663/272
   3stack-dig	3-stack (2-channel) with SPDIF
   3stack-6ch	 3-stack (6-channel)
   3stack-6ch-dig 3-stack (6-channel) with SPDIF
-  6stack-dig	 6-stack with SPDIF
+  5stack-dig	 5-stack with SPDIF
   lenovo-101e	 Lenovo laptop
   eeepc-p701	ASUS Eeepc P701
   eeepc-ep20	ASUS Eeepc EP20

Documentation/stable_api_nonsense.txt

@@ -122,7 +122,7 @@ operating system to suffer.
 
 In both of these instances, all developers agreed that these were
 important changes that needed to be made, and they were made, with
-relatively little pain.  If Linux had to ensure that it preserve a
+relatively little pain.  If Linux had to ensure that it will preserve a
 stable source interface, a new interface would have been created, and
 the older, broken one would have had to be maintained over time, leading
 to extra work for the USB developers.  Since all Linux USB developers do

Documentation/sysctl/fs.txt

@@ -231,13 +231,6 @@ its creation).
 
 This directory contains configuration options for the epoll(7) interface.
 
-max_user_instances
-------------------
-
-This is the maximum number of epoll file descriptors that a single user can
-have open at a given time. The default value is 128, and should be enough
-for normal users.
-
 max_user_watches
 ----------------
 

Documentation/sysctl/net.txt

@@ -32,6 +32,17 @@ Table : Subdirectories in /proc/sys/net
 1. /proc/sys/net/core - Network core options
 -------------------------------------------------------
 
+bpf_jit_enable
+--------------
+
+This enables Berkeley Packet Filter Just in Time compiler.
+Currently supported on x86_64 architecture, bpf_jit provides a framework
+to speed packet filtering, the one used by tcpdump/libpcap for example.
+Values :
+	0 - disable the JIT (default value)
+	1 - enable the JIT
+	2 - enable the JIT and ask the compiler to emit traces on kernel log.
+
 rmem_default
 ------------
 

Documentation/sysctl/vm.txt

@@ -481,10 +481,10 @@ the DMA zone.
 Type(A) is called as "Node" order. Type (B) is "Zone" order.
 
 "Node order" orders the zonelists by node, then by zone within each node.
-Specify "[Nn]ode" for zone order
+Specify "[Nn]ode" for node order
 
 "Zone Order" orders the zonelists by zone type, then by node within each
-zone.  Specify "[Zz]one"for zode order.
+zone.  Specify "[Zz]one" for zone order.
 
 Specify "[Dd]efault" to request automatic configuration.  Autoconfiguration
 will select "node" order in following case.

Documentation/timers/timers-howto.txt

@@ -24,7 +24,7 @@ ATOMIC CONTEXT:
 
 	ndelay(unsigned long nsecs)
 	udelay(unsigned long usecs)
-	mdelay(unsgined long msecs)
+	mdelay(unsigned long msecs)
 
 	udelay is the generally preferred API; ndelay-level
 	precision may not actually exist on many non-PC devices.

Documentation/trace/kprobetrace.txt

@@ -120,7 +120,6 @@ format:
         field:unsigned char common_flags;       offset:2;       size:1; signed:0;
         field:unsigned char common_preempt_count;       offset:3; size:1;signed:0;
         field:int common_pid;   offset:4;       size:4; signed:1;
-        field:int common_lock_depth;    offset:8;       size:4; signed:1;
 
         field:unsigned long __probe_ip; offset:12;      size:4; signed:0;
         field:int __probe_nargs;        offset:16;      size:4; signed:1;

Documentation/usb/callbacks.txt

@@ -95,9 +95,11 @@ pre_reset
 
 int (*pre_reset)(struct usb_interface *intf);
 
-Another driver or user space is triggering a reset on the device which
-contains the interface passed as an argument. Cease IO and save any
-device state you need to restore.
+A driver or user space is triggering a reset on the device which
+contains the interface passed as an argument. Cease IO, wait for all
+outstanding URBs to complete, and save any device state you need to
+restore.  No more URBs may be submitted until the post_reset method
+is called.
 
 If you need to allocate memory here, use GFP_NOIO or GFP_ATOMIC, if you
 are in atomic context.

Documentation/usb/linux-cdc-acm.inf

@@ -90,10 +90,10 @@ ServiceBinary=%12%\USBSER.sys
 [SourceDisksFiles]
 [SourceDisksNames]
 [DeviceList]
-%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7, USB\VID_0525&PID_A4AB&MI_02
+%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7, USB\VID_1D6B&PID_0104&MI_02
 
 [DeviceList.NTamd64]
-%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7, USB\VID_0525&PID_A4AB&MI_02
+%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7, USB\VID_1D6B&PID_0104&MI_02
 
 
 ;------------------------------------------------------------------------------

Documentation/usb/linux.inf

@@ -18,15 +18,15 @@ DriverVer           = 06/21/2006,6.0.6000.16384
 
 ; Decoration for x86 architecture
 [LinuxDevices.NTx86]
-%LinuxDevice%       = RNDIS.NT.5.1, USB\VID_0525&PID_a4a2, USB\VID_0525&PID_a4ab&MI_00
+%LinuxDevice%       = RNDIS.NT.5.1, USB\VID_0525&PID_a4a2, USB\VID_1d6b&PID_0104&MI_00
 
 ; Decoration for x64 architecture
 [LinuxDevices.NTamd64]
-%LinuxDevice%       = RNDIS.NT.5.1, USB\VID_0525&PID_a4a2, USB\VID_0525&PID_a4ab&MI_00
+%LinuxDevice%       = RNDIS.NT.5.1, USB\VID_0525&PID_a4a2, USB\VID_1d6b&PID_0104&MI_00
 
 ; Decoration for ia64 architecture
 [LinuxDevices.NTia64]
-%LinuxDevice%       = RNDIS.NT.5.1, USB\VID_0525&PID_a4a2, USB\VID_0525&PID_a4ab&MI_00
+%LinuxDevice%       = RNDIS.NT.5.1, USB\VID_0525&PID_a4a2, USB\VID_1d6b&PID_0104&MI_00
 
 ;@@@ This is the common setting for setup
 [ControlFlags]

Documentation/vgaarbiter.txt

@@ -14,11 +14,10 @@ the legacy VGA arbitration task (besides other bus management tasks) when more
 than one legacy device co-exists on the same machine. But the problem happens
 when these devices are trying to be accessed by different userspace clients
 (e.g. two server in parallel). Their address assignments conflict. Moreover,
-ideally, being an userspace application, it is not the role of the the X
-server to control bus resources. Therefore an arbitration scheme outside of
-the X server is needed to control the sharing of these resources. This
-document introduces the operation of the VGA arbiter implemented for Linux
-kernel.
+ideally, being a userspace application, it is not the role of the X server to
+control bus resources. Therefore an arbitration scheme outside of the X server
+is needed to control the sharing of these resources. This document introduces
+the operation of the VGA arbiter implemented for the Linux kernel.
 
 ----------------------------------------------------------------------------
 
@@ -39,7 +38,7 @@ I.1 vgaarb
 The vgaarb is a module of the Linux Kernel. When it is initially loaded, it
 scans all PCI devices and adds the VGA ones inside the arbitration. The
 arbiter then enables/disables the decoding on different devices of the VGA
-legacy instructions. Device which do not want/need to use the arbiter may
+legacy instructions. Devices which do not want/need to use the arbiter may
 explicitly tell it by calling vga_set_legacy_decoding().
 
 The kernel exports a char device interface (/dev/vga_arbiter) to the clients,
@@ -95,8 +94,8 @@ In the case of devices hot-{un,}plugged, there is a hook - pci_notify() - to
 notify them being added/removed in the system and automatically added/removed
 in the arbiter.
 
-There's also a in-kernel API of the arbiter in the case of DRM, vgacon and
-others which may use the arbiter.
+There is also an in-kernel API of the arbiter in case DRM, vgacon, or other
+drivers want to use it.
 
 
 I.2 libpciaccess
@@ -117,9 +116,8 @@ Besides it, in pci_system were added:
     struct pci_device *vga_default_dev;
 
 
-The vga_count is usually need to keep informed how many cards are being
-arbitrated, so for instance if there's only one then it can totally escape the
-scheme.
+The vga_count is used to track how many cards are being arbitrated, so for
+instance, if there is only one card, then it can completely escape arbitration.
 
 
 These functions below acquire VGA resources for the given card and mark those

Documentation/video4linux/CARDLIST.em28xx

@@ -54,7 +54,7 @@
  53 -> Pinnacle Hybrid Pro                      (em2881)
  54 -> Kworld VS-DVB-T 323UR                    (em2882)        [eb1a:e323]
  55 -> Terratec Cinnergy Hybrid T USB XS (em2882) (em2882)        [0ccd:005e,0ccd:0042]
- 56 -> Pinnacle Hybrid Pro (2)                  (em2882)        [2304:0226]
+ 56 -> Pinnacle Hybrid Pro (330e)               (em2882)        [2304:0226]
  57 -> Kworld PlusTV HD Hybrid 330              (em2883)        [eb1a:a316]
  58 -> Compro VideoMate ForYou/Stereo           (em2820/em2840) [185b:2041]
  60 -> Hauppauge WinTV HVR 850                  (em2883)        [2040:651f]

Documentation/video4linux/Zoran

@@ -130,7 +130,6 @@ Card number: 4
 
 Note: No module for the mse3000 is available yet
 Note: No module for the vpx3224 is available yet
-Note: use encoder=X or decoder=X for non-default i2c chips
 
 ===========================
 

Documentation/video4linux/gspca.txt

@@ -275,6 +275,7 @@ pac7302		093a:2629	Genious iSlim 300
 pac7302		093a:262a	Webcam 300k
 pac7302		093a:262c	Philips SPC 230 NC
 jeilinj		0979:0280	Sakar 57379
+jeilinj		0979:0280	Sportscam DV15
 zc3xx		0ac8:0302	Z-star Vimicro zc0302
 vc032x		0ac8:0321	Vimicro generic vc0321
 vc032x		0ac8:0323	Vimicro Vc0323

Documentation/video4linux/uvcvideo.txt

+Linux USB Video Class (UVC) driver
+==================================
+
+This file documents some driver-specific aspects of the UVC driver, such as
+driver-specific ioctls and implementation notes.
+
+Questions and remarks can be sent to the Linux UVC development mailing list at
+linux-uvc-devel@lists.berlios.de.
+
+
+Extension Unit (XU) support
+---------------------------
+
+1. Introduction
+
+The UVC specification allows for vendor-specific extensions through extension
+units (XUs). The Linux UVC driver supports extension unit controls (XU controls)
+through two separate mechanisms:
+
+  - through mappings of XU controls to V4L2 controls
+  - through a driver-specific ioctl interface
+
+The first one allows generic V4L2 applications to use XU controls by mapping
+certain XU controls onto V4L2 controls, which then show up during ordinary
+control enumeration.
+
+The second mechanism requires uvcvideo-specific knowledge for the application to
+access XU controls but exposes the entire UVC XU concept to user space for
+maximum flexibility.
+
+Both mechanisms complement each other and are described in more detail below.
+
+
+2. Control mappings
+
+The UVC driver provides an API for user space applications to define so-called
+control mappings at runtime. These allow for individual XU controls or byte
+ranges thereof to be mapped to new V4L2 controls. Such controls appear and
+function exactly like normal V4L2 controls (i.e. the stock controls, such as
+brightness, contrast, etc.). However, reading or writing of such a V4L2 controls
+triggers a read or write of the associated XU control.
+
+The ioctl used to create these control mappings is called UVCIOC_CTRL_MAP.
+Previous driver versions (before 0.2.0) required another ioctl to be used
+beforehand (UVCIOC_CTRL_ADD) to pass XU control information to the UVC driver.
+This is no longer necessary as newer uvcvideo versions query the information
+directly from the device.
+
+For details on the UVCIOC_CTRL_MAP ioctl please refer to the section titled
+"IOCTL reference" below.
+
+
+3. Driver specific XU control interface
+
+For applications that need to access XU controls directly, e.g. for testing
+purposes, firmware upload, or accessing binary controls, a second mechanism to
+access XU controls is provided in the form of a driver-specific ioctl, namely
+UVCIOC_CTRL_QUERY.
+
+A call to this ioctl allows applications to send queries to the UVC driver that
+directly map to the low-level UVC control requests.
+
+In order to make such a request the UVC unit ID of the control's extension unit
+and the control selector need to be known. This information either needs to be
+hardcoded in the application or queried using other ways such as by parsing the
+UVC descriptor or, if available, using the media controller API to enumerate a
+device's entities.
+
+Unless the control size is already known it is necessary to first make a
+UVC_GET_LEN requests in order to be able to allocate a sufficiently large buffer
+and set the buffer size to the correct value. Similarly, to find out whether
+UVC_GET_CUR or UVC_SET_CUR are valid requests for a given control, a
+UVC_GET_INFO request should be made. The bits 0 (GET supported) and 1 (SET
+supported) of the resulting byte indicate which requests are valid.
+
+With the addition of the UVCIOC_CTRL_QUERY ioctl the UVCIOC_CTRL_GET and
+UVCIOC_CTRL_SET ioctls have become obsolete since their functionality is a
+subset of the former ioctl. For the time being they are still supported but
+application developers are encouraged to use UVCIOC_CTRL_QUERY instead.
+
+For details on the UVCIOC_CTRL_QUERY ioctl please refer to the section titled
+"IOCTL reference" below.
+
+
+4. Security
+
+The API doesn't currently provide a fine-grained access control facility. The
+UVCIOC_CTRL_ADD and UVCIOC_CTRL_MAP ioctls require super user permissions.
+
+Suggestions on how to improve this are welcome.
+
+
+5. Debugging
+
+In order to debug problems related to XU controls or controls in general it is
+recommended to enable the UVC_TRACE_CONTROL bit in the module parameter 'trace'.
+This causes extra output to be written into the system log.
+
+
+6. IOCTL reference
+
+---- UVCIOC_CTRL_MAP - Map a UVC control to a V4L2 control ----
+
+Argument: struct uvc_xu_control_mapping
+
+Description:
+	This ioctl creates a mapping between a UVC control or part of a UVC
+	control and a V4L2 control. Once mappings are defined, userspace
+	applications can access vendor-defined UVC control through the V4L2
+	control API.
+
+	To create a mapping, applications fill the uvc_xu_control_mapping
+	structure with information about an existing UVC control defined with
+	UVCIOC_CTRL_ADD and a new V4L2 control.
+
+	A UVC control can be mapped to several V4L2 controls. For instance,
+	a UVC pan/tilt control could be mapped to separate pan and tilt V4L2
+	controls. The UVC control is divided into non overlapping fields using
+	the 'size' and 'offset' fields and are then independantly mapped to
+	V4L2 control.
+
+	For signed integer V4L2 controls the data_type field should be set to
+	UVC_CTRL_DATA_TYPE_SIGNED. Other values are currently ignored.
+
+Return value:
+	On success 0 is returned. On error -1 is returned and errno is set
+	appropriately.
+
+	ENOMEM
+		Not enough memory to perform the operation.
+	EPERM
+		Insufficient privileges (super user privileges are required).
+	EINVAL
+		No such UVC control.
+	EOVERFLOW
+		The requested offset and size would overflow the UVC control.
+	EEXIST
+		Mapping already exists.
+
+Data types:
+	* struct uvc_xu_control_mapping
+
+	__u32	id		V4L2 control identifier
+	__u8	name[32]	V4L2 control name
+	__u8	entity[16]	UVC extension unit GUID
+	__u8	selector	UVC control selector
+	__u8	size		V4L2 control size (in bits)
+	__u8	offset		V4L2 control offset (in bits)
+	enum v4l2_ctrl_type
+		v4l2_type	V4L2 control type
+	enum uvc_control_data_type
+		data_type	UVC control data type
+	struct uvc_menu_info
+		*menu_info	Array of menu entries (for menu controls only)
+	__u32	menu_count	Number of menu entries (for menu controls only)
+
+	* struct uvc_menu_info
+
+	__u32	value		Menu entry value used by the device
+	__u8	name[32]	Menu entry name
+
+
+	* enum uvc_control_data_type
+
+	UVC_CTRL_DATA_TYPE_RAW		Raw control (byte array)
+	UVC_CTRL_DATA_TYPE_SIGNED	Signed integer
+	UVC_CTRL_DATA_TYPE_UNSIGNED	Unsigned integer
+	UVC_CTRL_DATA_TYPE_BOOLEAN	Boolean
+	UVC_CTRL_DATA_TYPE_ENUM		Enumeration
+	UVC_CTRL_DATA_TYPE_BITMASK	Bitmask
+
+
+---- UVCIOC_CTRL_QUERY - Query a UVC XU control ----
+
+Argument: struct uvc_xu_control_query
+
+Description:
+	This ioctl queries a UVC XU control identified by its extension unit ID
+	and control selector.
+
+	There are a number of different queries available that closely
+	correspond to the low-level control requests described in the UVC
+	specification. These requests are:
+
+	UVC_GET_CUR
+		Obtain the current value of the control.
+	UVC_GET_MIN
+		Obtain the minimum value of the control.
+	UVC_GET_MAX
+		Obtain the maximum value of the control.
+	UVC_GET_DEF
+		Obtain the default value of the control.
+	UVC_GET_RES
+		Query the resolution of the control, i.e. the step size of the
+		allowed control values.
+	UVC_GET_LEN
+		Query the size of the control in bytes.
+	UVC_GET_INFO
+		Query the control information bitmap, which indicates whether
+		get/set requests are supported.
+	UVC_SET_CUR
+		Update the value of the control.
+
+	Applications must set the 'size' field to the correct length for the
+	control. Exceptions are the UVC_GET_LEN and UVC_GET_INFO queries, for
+	which the size must be set to 2 and 1, respectively. The 'data' field
+	must point to a valid writable buffer big enough to hold the indicated
+	number of data bytes.
+
+	Data is copied directly from the device without any driver-side
+	processing. Applications are responsible for data buffer formatting,
+	including little-endian/big-endian conversion. This is particularly
+	important for the result of the UVC_GET_LEN requests, which is always
+	returned as a little-endian 16-bit integer by the device.
+
+Return value:
+	On success 0 is returned. On error -1 is returned and errno is set
+	appropriately.
+
+	ENOENT
+		The device does not support the given control or the specified
+		extension unit could not be found.
+	ENOBUFS
+		The specified buffer size is incorrect (too big or too small).
+	EINVAL
+		An invalid request code was passed.
+	EBADRQC
+		The given request is not supported by the given control.
+	EFAULT
+		The data pointer references an inaccessible memory area.
+
+Data types:
+	* struct uvc_xu_control_query
+
+	__u8	unit		Extension unit ID
+	__u8	selector	Control selector
+	__u8	query		Request code to send to the device
+	__u16	size		Control data size (in bytes)
+	__u8	*data		Control value

Documentation/virtual/00-INDEX

+Virtualization support in the Linux kernel.
+
+00-INDEX
+	- this file.
+kvm/
+	- Kernel Virtual Machine.  See also http://linux-kvm.org
+lguest/
+	- Extremely simple hypervisor for experimental/educational use.
+uml/
+	- User Mode Linux, builds/runs Linux kernel as a userspace program.

Documentation/virtual/kvm/review-checklist.txt

+Review checklist for kvm patches
+================================
+
+1.  The patch must follow Documentation/CodingStyle and
+    Documentation/SubmittingPatches.
+
+2.  Patches should be against kvm.git master branch.
+
+3.  If the patch introduces or modifies a new userspace API:
+    - the API must be documented in Documentation/virtual/kvm/api.txt
+    - the API must be discoverable using KVM_CHECK_EXTENSION
+
+4.  New state must include support for save/restore.
+
+5.  New features must default to off (userspace should explicitly request them).
+    Performance improvements can and should default to on.
+
+6.  New cpu features should be exposed via KVM_GET_SUPPORTED_CPUID2
+
+7.  Emulator changes should be accompanied by unit tests for qemu-kvm.git
+    kvm/test directory.
+
+8.  Changes should be vendor neutral when possible.  Changes to common code
+    are better than duplicating changes to vendor code.
+
+9.  Similarly, prefer changes to arch independent code than to arch dependent
+    code.
+
+10. User/kernel interfaces and guest/host interfaces must be 64-bit clean
+    (all variables and sizes naturally aligned on 64-bit; use specific types
+    only - u64 rather than ulong).
+
+11. New guest visible features must either be documented in a hardware manual
+    or be accompanied by documentation.
+
+12. Features must be robust against reset and kexec - for example, shared
+    host/guest memory must be unshared to prevent the host from writing to
+    guest memory that the guest has not reserved for this purpose.

Documentation/virtual/lguest/lguest.txt

+      __
+ (___()'`;  Rusty's Remarkably Unreliable Guide to Lguest
+ /,    /`      - or, A Young Coder's Illustrated Hypervisor
+ \\"--\\    http://lguest.ozlabs.org
+
+Lguest is designed to be a minimal 32-bit x86 hypervisor for the Linux kernel,
+for Linux developers and users to experiment with virtualization with the
+minimum of complexity.  Nonetheless, it should have sufficient features to
+make it useful for specific tasks, and, of course, you are encouraged to fork
+and enhance it (see drivers/lguest/README).
+
+Features:
+
+- Kernel module which runs in a normal kernel.
+- Simple I/O model for communication.
+- Simple program to create new guests.
+- Logo contains cute puppies: http://lguest.ozlabs.org
+
+Developer features:
+
+- Fun to hack on.
+- No ABI: being tied to a specific kernel anyway, you can change anything.
+- Many opportunities for improvement or feature implementation.
+
+Running Lguest:
+
+- The easiest way to run lguest is to use same kernel as guest and host.
+  You can configure them differently, but usually it's easiest not to.
+
+  You will need to configure your kernel with the following options:
+
+  "General setup":
+     "Prompt for development and/or incomplete code/drivers" = Y
+        (CONFIG_EXPERIMENTAL=y)
+
+  "Processor type and features":
+     "Paravirtualized guest support" = Y
+        "Lguest guest support" = Y
+     "High Memory Support" = off/4GB
+     "Alignment value to which kernel should be aligned" = 0x100000
+        (CONFIG_PARAVIRT=y, CONFIG_LGUEST_GUEST=y, CONFIG_HIGHMEM64G=n and
+         CONFIG_PHYSICAL_ALIGN=0x100000)
+
+  "Device Drivers":
+     "Block devices"
+        "Virtio block driver (EXPERIMENTAL)" = M/Y
+     "Network device support"
+        "Universal TUN/TAP device driver support" = M/Y
+        "Virtio network driver (EXPERIMENTAL)" = M/Y
+           (CONFIG_VIRTIO_BLK=m, CONFIG_VIRTIO_NET=m and CONFIG_TUN=m)
+
+  "Virtualization"
+     "Linux hypervisor example code" = M/Y
+        (CONFIG_LGUEST=m)
+
+- A tool called "lguest" is available in this directory: type "make"
+  to build it.  If you didn't build your kernel in-tree, use "make
+  O=<builddir>".
+
+- Create or find a root disk image.  There are several useful ones
+  around, such as the xm-test tiny root image at
+	  http://xm-test.xensource.com/ramdisks/initrd-1.1-i386.img
+
+  For more serious work, I usually use a distribution ISO image and
+  install it under qemu, then make multiple copies:
+
+	  dd if=/dev/zero of=rootfile bs=1M count=2048
+	  qemu -cdrom image.iso -hda rootfile -net user -net nic -boot d
+
+  Make sure that you install a getty on /dev/hvc0 if you want to log in on the
+  console!
+
+- "modprobe lg" if you built it as a module.
+
+- Run an lguest as root:
+
+      Documentation/virtual/lguest/lguest 64 vmlinux --tunnet=192.168.19.1 \
+        --block=rootfile root=/dev/vda
+
+   Explanation:
+    64: the amount of memory to use, in MB.
+
+    vmlinux: the kernel image found in the top of your build directory.  You
+       can also use a standard bzImage.
+
+    --tunnet=192.168.19.1: configures a "tap" device for networking with this
+       IP address.
+
+    --block=rootfile: a file or block device which becomes /dev/vda
+       inside the guest.
+
+    root=/dev/vda: this (and anything else on the command line) are
+       kernel boot parameters.
+
+- Configuring networking.  I usually have the host masquerade, using
+  "iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE" and "echo 1 >
+  /proc/sys/net/ipv4/ip_forward".  In this example, I would configure
+  eth0 inside the guest at 192.168.19.2.
+
+  Another method is to bridge the tap device to an external interface
+  using --tunnet=bridge:<bridgename>, and perhaps run dhcp on the guest
+  to obtain an IP address.  The bridge needs to be configured first:
+  this option simply adds the tap interface to it.
+
+  A simple example on my system:
+
+    ifconfig eth0 0.0.0.0
+    brctl addbr lg0
+    ifconfig lg0 up
+    brctl addif lg0 eth0
+    dhclient lg0
+
+  Then use --tunnet=bridge:lg0 when launching the guest.
+
+  See:
+  
+    http://www.linuxfoundation.org/collaborate/workgroups/networking/bridge
+    
+  for general information on how to get bridging to work.
+
+- Random number generation. Using the --rng option will provide a
+  /dev/hwrng in the guest that will read from the host's /dev/random.
+  Use this option in conjunction with rng-tools (see ../hw_random.txt)
+  to provide entropy to the guest kernel's /dev/random.
+
+There is a helpful mailing list at http://ozlabs.org/mailman/listinfo/lguest
+
+Good luck!
+Rusty Russell rusty@rustcorp.com.au.

Documentation/x86/x86_64/boot-options.txt

@@ -206,7 +206,7 @@ IOMMU (input/output memory management unit)
       (e.g. because you have < 3 GB memory).
       Kernel boot message: "PCI-DMA: Disabling IOMMU"
 
-   2. <arch/x86_64/kernel/pci-gart.c>: AMD GART based hardware IOMMU.
+   2. <arch/x86/kernel/amd_gart_64.c>: AMD GART based hardware IOMMU.
       Kernel boot message: "PCI-DMA: using GART IOMMU"
 
    3. <arch/x86_64/kernel/pci-swiotlb.c> : Software IOMMU implementation. Used

Makefile

 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 39
-EXTRAVERSION = -rc7
+EXTRAVERSION =
 NAME = Flesh-Eating Bats with Fangs
 
 # *DOCUMENTATION*
@@ -1268,6 +1268,7 @@ help:
 	@echo  '  make C=1   [targets] Check all c source with $$CHECK (sparse by default)'
 	@echo  '  make C=2   [targets] Force check of all c source with $$CHECK'
 	@echo  '  make W=1   [targets] Enable extra gcc checks'
+	@echo  '  make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
 	@echo  ''
 	@echo  'Execute "make" or "make all" to build all targets marked with [*] '
 	@echo  'For further info see the ./README file'