提交 5aa80650 编写于 作者: G Geert Uytterhoeven 提交者: Simon Horman

ARM: dts: r8a7791: Use SYSC "always-on" PM Domain

Hook up all devices that are part of the CPG/MSTP Clock Domain to the
SYSC "always-on" PM Domain, for a more consistent device-power-area
description in DT.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
上级 36ee3c27
......@@ -122,7 +122,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7791_CLK_GPIO0>;
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
};
gpio1: gpio@e6051000 {
......@@ -135,7 +135,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7791_CLK_GPIO1>;
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
};
gpio2: gpio@e6052000 {
......@@ -148,7 +148,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7791_CLK_GPIO2>;
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
};
gpio3: gpio@e6053000 {
......@@ -161,7 +161,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7791_CLK_GPIO3>;
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
};
gpio4: gpio@e6054000 {
......@@ -174,7 +174,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7791_CLK_GPIO4>;
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
};
gpio5: gpio@e6055000 {
......@@ -187,7 +187,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7791_CLK_GPIO5>;
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
};
gpio6: gpio@e6055400 {
......@@ -200,7 +200,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7791_CLK_GPIO6>;
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
};
gpio7: gpio@e6055800 {
......@@ -213,7 +213,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7791_CLK_GPIO7>;
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
};
thermal: thermal@e61f0000 {
......@@ -223,7 +223,7 @@
reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp5_clks R8A7791_CLK_THERMAL>;
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
#thermal-sensor-cells = <0>;
};
......@@ -242,7 +242,7 @@
<GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7791_CLK_CMT0>;
clock-names = "fck";
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
renesas,channels-mask = <0x60>;
......@@ -262,7 +262,7 @@
<GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_CMT1>;
clock-names = "fck";
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
renesas,channels-mask = <0xff>;
......@@ -285,7 +285,7 @@
<GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R8A7791_CLK_IRQC>;
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
};
dmac0: dma-controller@e6700000 {
......@@ -314,7 +314,7 @@
"ch12", "ch13", "ch14";
clocks = <&mstp2_clks R8A7791_CLK_SYS_DMAC0>;
clock-names = "fck";
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <15>;
};
......@@ -345,7 +345,7 @@
"ch12", "ch13", "ch14";
clocks = <&mstp2_clks R8A7791_CLK_SYS_DMAC1>;
clock-names = "fck";
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <15>;
};
......@@ -374,7 +374,7 @@
"ch12";
clocks = <&mstp5_clks R8A7791_CLK_AUDIO_DMAC0>;
clock-names = "fck";
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <13>;
};
......@@ -403,7 +403,7 @@
"ch12";
clocks = <&mstp5_clks R8A7791_CLK_AUDIO_DMAC1>;
clock-names = "fck";
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <13>;
};
......@@ -415,7 +415,7 @@
GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&mstp3_clks R8A7791_CLK_USBDMAC0>;
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <2>;
};
......@@ -427,7 +427,7 @@
GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&mstp3_clks R8A7791_CLK_USBDMAC1>;
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <2>;
};
......@@ -440,7 +440,7 @@
reg = <0 0xe6508000 0 0x40>;
interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_I2C0>;
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
......@@ -452,7 +452,7 @@
reg = <0 0xe6518000 0 0x40>;
interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_I2C1>;
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
......@@ -464,7 +464,7 @@
reg = <0 0xe6530000 0 0x40>;
interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_I2C2>;
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
......@@ -476,7 +476,7 @@
reg = <0 0xe6540000 0 0x40>;
interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_I2C3>;
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
......@@ -488,7 +488,7 @@
reg = <0 0xe6520000 0 0x40>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_I2C4>;
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
......@@ -501,7 +501,7 @@
reg = <0 0xe6528000 0 0x40>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_I2C5>;
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <110>;
status = "disabled";
};
......@@ -516,7 +516,7 @@
clocks = <&mstp9_clks R8A7791_CLK_IICDVFS>;
dmas = <&dmac0 0x77>, <&dmac0 0x78>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
......@@ -529,7 +529,7 @@
clocks = <&mstp3_clks R8A7791_CLK_IIC0>;
dmas = <&dmac0 0x61>, <&dmac0 0x62>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
......@@ -542,7 +542,7 @@
clocks = <&mstp3_clks R8A7791_CLK_IIC1>;
dmas = <&dmac0 0x65>, <&dmac0 0x66>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
......@@ -558,7 +558,7 @@
clocks = <&mstp3_clks R8A7791_CLK_MMCIF0>;
dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
reg-io-width = <4>;
status = "disabled";
max-frequency = <97500000>;
......@@ -571,7 +571,7 @@
clocks = <&mstp3_clks R8A7791_CLK_SDHI0>;
dmas = <&dmac1 0xcd>, <&dmac1 0xce>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
......@@ -582,7 +582,7 @@
clocks = <&mstp3_clks R8A7791_CLK_SDHI1>;
dmas = <&dmac1 0xc1>, <&dmac1 0xc2>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
......@@ -593,7 +593,7 @@
clocks = <&mstp3_clks R8A7791_CLK_SDHI2>;
dmas = <&dmac1 0xd3>, <&dmac1 0xd4>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
......@@ -606,7 +606,7 @@
clock-names = "fck";
dmas = <&dmac0 0x21>, <&dmac0 0x22>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
......@@ -619,7 +619,7 @@
clock-names = "fck";
dmas = <&dmac0 0x25>, <&dmac0 0x26>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
......@@ -632,7 +632,7 @@
clock-names = "fck";
dmas = <&dmac0 0x27>, <&dmac0 0x28>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
......@@ -645,7 +645,7 @@
clock-names = "fck";
dmas = <&dmac0 0x1b>, <&dmac0 0x1c>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
......@@ -658,7 +658,7 @@
clock-names = "fck";
dmas = <&dmac0 0x1f>, <&dmac0 0x20>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
......@@ -671,7 +671,7 @@
clock-names = "fck";
dmas = <&dmac0 0x23>, <&dmac0 0x24>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
......@@ -684,7 +684,7 @@
clock-names = "fck";
dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
......@@ -697,7 +697,7 @@
clock-names = "fck";
dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
......@@ -710,7 +710,7 @@
clock-names = "fck";
dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
......@@ -724,7 +724,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
......@@ -738,7 +738,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
......@@ -752,7 +752,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
......@@ -766,7 +766,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
......@@ -780,7 +780,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
......@@ -794,7 +794,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
......@@ -808,7 +808,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
......@@ -822,7 +822,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
......@@ -836,7 +836,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
......@@ -845,7 +845,7 @@
reg = <0 0xee700000 0 0x400>;
interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7791_CLK_ETHER>;
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
phy-mode = "rmii";
#address-cells = <1>;
#size-cells = <0>;
......@@ -858,7 +858,7 @@
reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7791_CLK_ETHERAVB>;
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
......@@ -869,7 +869,7 @@
reg = <0 0xee300000 0 0x2000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7791_CLK_SATA0>;
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
......@@ -878,7 +878,7 @@
reg = <0 0xee500000 0 0x2000>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7791_CLK_SATA1>;
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
......@@ -890,7 +890,7 @@
dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
<&usb_dmac1 0>, <&usb_dmac1 1>;
dma-names = "ch0", "ch1", "ch2", "ch3";
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
renesas,buswait = <4>;
phys = <&usb0 1>;
phy-names = "usb";
......@@ -904,7 +904,7 @@
#size-cells = <0>;
clocks = <&mstp7_clks R8A7791_CLK_HSUSB>;
clock-names = "usbhs";
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
usb0: usb-channel@0 {
......@@ -922,7 +922,7 @@
reg = <0 0xe6ef0000 0 0x1000>;
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7791_CLK_VIN0>;
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
......@@ -931,7 +931,7 @@
reg = <0 0xe6ef1000 0 0x1000>;
interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7791_CLK_VIN1>;
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
......@@ -940,7 +940,7 @@
reg = <0 0xe6ef2000 0 0x1000>;
interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7791_CLK_VIN2>;
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
......@@ -949,7 +949,7 @@
reg = <0 0xfe928000 0 0x8000>;
interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7791_CLK_VSP1_S>;
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
renesas,has-lut;
renesas,has-sru;
......@@ -963,7 +963,7 @@
reg = <0 0xfe930000 0 0x8000>;
interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU0>;
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
renesas,has-lif;
renesas,has-lut;
......@@ -977,7 +977,7 @@
reg = <0 0xfe938000 0 0x8000>;
interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU1>;
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
renesas,has-lif;
renesas,has-lut;
......@@ -1023,7 +1023,7 @@
clocks = <&mstp9_clks R8A7791_CLK_RCAN0>,
<&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>;
clock-names = "clkp1", "clkp2", "can_clk";
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
......@@ -1034,7 +1034,7 @@
clocks = <&mstp9_clks R8A7791_CLK_RCAN1>,
<&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>;
clock-names = "clkp1", "clkp2", "can_clk";
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
......@@ -1043,7 +1043,7 @@
reg = <0 0xfe980000 0 0x10300>;
interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7791_CLK_JPU>;
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
};
clocks {
......@@ -1483,7 +1483,7 @@
clocks = <&mstp9_clks R8A7791_CLK_QSPI_MOD>;
dmas = <&dmac0 0x17>, <&dmac0 0x18>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
......@@ -1497,7 +1497,7 @@
clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>;
dmas = <&dmac0 0x51>, <&dmac0 0x52>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
......@@ -1510,7 +1510,7 @@
clocks = <&mstp2_clks R8A7791_CLK_MSIOF1>;
dmas = <&dmac0 0x55>, <&dmac0 0x56>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
......@@ -1523,7 +1523,7 @@
clocks = <&mstp2_clks R8A7791_CLK_MSIOF2>;
dmas = <&dmac0 0x41>, <&dmac0 0x42>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
......@@ -1534,7 +1534,7 @@
reg = <0 0xee000000 0 0xc00>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_SSUSB>;
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
phys = <&usb2 1>;
phy-names = "usb";
status = "disabled";
......@@ -1547,7 +1547,7 @@
<0 0xee080000 0 0x1100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_EHCI>;
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
bus-range = <0 0>;
......@@ -1582,7 +1582,7 @@
<0 0xee0c0000 0 0x1100>;
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_EHCI>;
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
bus-range = <1 1>;
......@@ -1632,7 +1632,7 @@
interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_PCIEC>, <&pcie_bus_clk>;
clock-names = "pcie", "pcie_bus";
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
......@@ -1735,7 +1735,7 @@
"mix.0", "mix.1",
"dvc.0", "dvc.1",
"clk_a", "clk_b", "clk_c", "clk_i";
power-domains = <&cpg_clocks>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册