提交 5aa5fa9f 编写于 作者: M Mark Brown

ASoC: wm8711: Convert to direct regmap API usage

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
上级 18273b05
...@@ -18,6 +18,7 @@ ...@@ -18,6 +18,7 @@
#include <linux/delay.h> #include <linux/delay.h>
#include <linux/pm.h> #include <linux/pm.h>
#include <linux/i2c.h> #include <linux/i2c.h>
#include <linux/regmap.h>
#include <linux/spi/spi.h> #include <linux/spi/spi.h>
#include <linux/slab.h> #include <linux/slab.h>
#include <linux/of_device.h> #include <linux/of_device.h>
...@@ -32,7 +33,7 @@ ...@@ -32,7 +33,7 @@
/* codec private data */ /* codec private data */
struct wm8711_priv { struct wm8711_priv {
enum snd_soc_control_type bus_type; struct regmap *regmap;
unsigned int sysclk; unsigned int sysclk;
}; };
...@@ -42,11 +43,21 @@ struct wm8711_priv { ...@@ -42,11 +43,21 @@ struct wm8711_priv {
* using 2 wire for device control, so we cache them instead. * using 2 wire for device control, so we cache them instead.
* There is no point in caching the reset register * There is no point in caching the reset register
*/ */
static const u16 wm8711_reg[WM8711_CACHEREGNUM] = { static const struct reg_default wm8711_reg_defaults[] = {
0x0079, 0x0079, 0x000a, 0x0008, { 0, 0x0079 }, { 1, 0x0079 }, { 2, 0x000a }, { 3, 0x0008 },
0x009f, 0x000a, 0x0000, 0x0000 { 4, 0x009f }, { 5, 0x000a }, { 6, 0x0000 }, { 7, 0x0000 },
}; };
static bool wm8711_volatile(struct device *dev, unsigned int reg)
{
switch (reg) {
case WM8711_RESET:
return true;
default:
return false;
}
}
#define wm8711_reset(c) snd_soc_write(c, WM8711_RESET, 0) #define wm8711_reset(c) snd_soc_write(c, WM8711_RESET, 0)
static const DECLARE_TLV_DB_SCALE(out_tlv, -12100, 100, 1); static const DECLARE_TLV_DB_SCALE(out_tlv, -12100, 100, 1);
...@@ -289,6 +300,7 @@ static int wm8711_set_dai_fmt(struct snd_soc_dai *codec_dai, ...@@ -289,6 +300,7 @@ static int wm8711_set_dai_fmt(struct snd_soc_dai *codec_dai,
static int wm8711_set_bias_level(struct snd_soc_codec *codec, static int wm8711_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level) enum snd_soc_bias_level level)
{ {
struct wm8711_priv *wm8711 = snd_soc_codec_get_drvdata(codec);
u16 reg = snd_soc_read(codec, WM8711_PWR) & 0xff7f; u16 reg = snd_soc_read(codec, WM8711_PWR) & 0xff7f;
switch (level) { switch (level) {
...@@ -299,7 +311,7 @@ static int wm8711_set_bias_level(struct snd_soc_codec *codec, ...@@ -299,7 +311,7 @@ static int wm8711_set_bias_level(struct snd_soc_codec *codec,
break; break;
case SND_SOC_BIAS_STANDBY: case SND_SOC_BIAS_STANDBY:
if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) if (codec->dapm.bias_level == SND_SOC_BIAS_OFF)
snd_soc_cache_sync(codec); regcache_sync(wm8711->regmap);
snd_soc_write(codec, WM8711_PWR, reg | 0x0040); snd_soc_write(codec, WM8711_PWR, reg | 0x0040);
break; break;
...@@ -353,10 +365,9 @@ static int wm8711_resume(struct snd_soc_codec *codec) ...@@ -353,10 +365,9 @@ static int wm8711_resume(struct snd_soc_codec *codec)
static int wm8711_probe(struct snd_soc_codec *codec) static int wm8711_probe(struct snd_soc_codec *codec)
{ {
struct wm8711_priv *wm8711 = snd_soc_codec_get_drvdata(codec);
int ret; int ret;
ret = snd_soc_codec_set_cache_io(codec, 7, 9, wm8711->bus_type); ret = snd_soc_codec_set_cache_io(codec, 7, 9, SND_SOC_REGMAP);
if (ret < 0) { if (ret < 0) {
dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret); dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
return ret; return ret;
...@@ -391,9 +402,6 @@ static struct snd_soc_codec_driver soc_codec_dev_wm8711 = { ...@@ -391,9 +402,6 @@ static struct snd_soc_codec_driver soc_codec_dev_wm8711 = {
.suspend = wm8711_suspend, .suspend = wm8711_suspend,
.resume = wm8711_resume, .resume = wm8711_resume,
.set_bias_level = wm8711_set_bias_level, .set_bias_level = wm8711_set_bias_level,
.reg_cache_size = ARRAY_SIZE(wm8711_reg),
.reg_word_size = sizeof(u16),
.reg_cache_default = wm8711_reg,
.controls = wm8711_snd_controls, .controls = wm8711_snd_controls,
.num_controls = ARRAY_SIZE(wm8711_snd_controls), .num_controls = ARRAY_SIZE(wm8711_snd_controls),
.dapm_widgets = wm8711_dapm_widgets, .dapm_widgets = wm8711_dapm_widgets,
...@@ -408,6 +416,18 @@ static const struct of_device_id wm8711_of_match[] = { ...@@ -408,6 +416,18 @@ static const struct of_device_id wm8711_of_match[] = {
}; };
MODULE_DEVICE_TABLE(of, wm8711_of_match); MODULE_DEVICE_TABLE(of, wm8711_of_match);
static const struct regmap_config wm8711_regmap = {
.reg_bits = 7,
.val_bits = 9,
.max_register = WM8711_RESET,
.reg_defaults = wm8711_reg_defaults,
.num_reg_defaults = ARRAY_SIZE(wm8711_reg_defaults),
.cache_type = REGCACHE_RBTREE,
.volatile_reg = wm8711_volatile,
};
#if defined(CONFIG_SPI_MASTER) #if defined(CONFIG_SPI_MASTER)
static int __devinit wm8711_spi_probe(struct spi_device *spi) static int __devinit wm8711_spi_probe(struct spi_device *spi)
{ {
...@@ -419,8 +439,11 @@ static int __devinit wm8711_spi_probe(struct spi_device *spi) ...@@ -419,8 +439,11 @@ static int __devinit wm8711_spi_probe(struct spi_device *spi)
if (wm8711 == NULL) if (wm8711 == NULL)
return -ENOMEM; return -ENOMEM;
wm8711->regmap = devm_regmap_init_spi(spi, &wm8711_regmap);
if (IS_ERR(wm8711->regmap))
return PTR_ERR(wm8711->regmap);
spi_set_drvdata(spi, wm8711); spi_set_drvdata(spi, wm8711);
wm8711->bus_type = SND_SOC_SPI;
ret = snd_soc_register_codec(&spi->dev, ret = snd_soc_register_codec(&spi->dev,
&soc_codec_dev_wm8711, &wm8711_dai, 1); &soc_codec_dev_wm8711, &wm8711_dai, 1);
...@@ -458,8 +481,11 @@ static __devinit int wm8711_i2c_probe(struct i2c_client *client, ...@@ -458,8 +481,11 @@ static __devinit int wm8711_i2c_probe(struct i2c_client *client,
if (wm8711 == NULL) if (wm8711 == NULL)
return -ENOMEM; return -ENOMEM;
wm8711->regmap = devm_regmap_init_i2c(client, &wm8711_regmap);
if (IS_ERR(wm8711->regmap))
return PTR_ERR(wm8711->regmap);
i2c_set_clientdata(client, wm8711); i2c_set_clientdata(client, wm8711);
wm8711->bus_type = SND_SOC_I2C;
ret = snd_soc_register_codec(&client->dev, ret = snd_soc_register_codec(&client->dev,
&soc_codec_dev_wm8711, &wm8711_dai, 1); &soc_codec_dev_wm8711, &wm8711_dai, 1);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册