提交 59fb659b 编写于 作者: P Paul Walmsley

OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files

In preparation for adding OMAP4-specific PRCM accessor/mutator
functions, split the existing OMAP2/3 PRCM code into OMAP2/3-specific
files.  Most of what was in mach-omap2/{cm,prm}.{c,h} has now been
moved into mach-omap2/{cm,prm}2xxx_3xxx.{c,h}, since it was
OMAP2xxx/3xxx-specific.

This process also requires the #includes in each of these files to be
changed to reference the new file name.  As part of doing so, add some
comments into plat-omap/sram.c and plat-omap/mcbsp.c, which use
"sideways includes", to indicate that these users of the PRM/CM includes
should not be doing so.

Thanks to Felipe Contreras <felipe.contreras@gmail.com> for comments on this
patch.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Cc: Jarkko Nikula <jhnikula@gmail.com>
Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Cc: Liam Girdwood <lrg@slimlogic.co.uk>
Cc: Omar Ramirez Luna <omar.ramirez@ti.com>
Acked-by: NOmar Ramirez Luna <omar.ramirez@ti.com>
Cc: Felipe Contreras <felipe.contreras@gmail.com>
Acked-by: NFelipe Contreras <felipe.contreras@gmail.com>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Reviewed-by: NKevin Hilman <khilman@deeprootsystems.com>
Tested-by: NKevin Hilman <khilman@deeprootsystems.com>
Tested-by: NRajendra Nayak <rnayak@ti.com>
Tested-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
上级 cdb54c44
......@@ -6,7 +6,7 @@
obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o pm.o \
common.o gpio.o dma.o wd_timer.o
omap-2-3-common = irq.o sdrc.o prm2xxx_3xxx.o
omap-2-3-common = irq.o sdrc.o
hwmod-common = omap_hwmod.o \
omap_hwmod_common_data.o
clock-common = clock.o clock_common_data.o \
......@@ -72,9 +72,12 @@ endif
endif
# PRCM
obj-$(CONFIG_ARCH_OMAP2) += prcm.o cm.o
obj-$(CONFIG_ARCH_OMAP3) += prcm.o cm.o
obj-$(CONFIG_ARCH_OMAP4) += prcm.o cm4xxx.o
obj-$(CONFIG_ARCH_OMAP2) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
obj-$(CONFIG_ARCH_OMAP3) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
# XXX The presence of cm2xxx_3xxx.o on the line below is temporary and
# will be removed once the OMAP4 part of the codebase is converted to
# use OMAP4-specific PRCM functions.
obj-$(CONFIG_ARCH_OMAP4) += prcm.o cm2xxx_3xxx.o cm4xxx.o
# OMAP powerdomain framework
powerdomain-common += powerdomain.o powerdomain-common.o
......
......@@ -26,7 +26,7 @@
#include "clock.h"
#include "clock2xxx.h"
#include "cm.h"
#include "cm2xxx_3xxx.h"
#include "cm-regbits-24xx.h"
/* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */
......
......@@ -32,7 +32,7 @@
#include "clock.h"
#include "clock2xxx.h"
#include "opp2xxx.h"
#include "cm.h"
#include "cm2xxx_3xxx.h"
#include "cm-regbits-24xx.h"
/* #define DOWN_VARIABLE_DPLL 1 */ /* Experimental */
......
......@@ -27,7 +27,7 @@
#include "clock.h"
#include "clock2xxx.h"
#include "prm.h"
#include "prm2xxx_3xxx.h"
#include "prm-regbits-24xx.h"
static int omap2_enable_osc_ck(struct clk *clk)
......
......@@ -26,7 +26,7 @@
#include "clock.h"
#include "clock2xxx.h"
#include "prm.h"
#include "prm2xxx_3xxx.h"
#include "prm-regbits-24xx.h"
void __iomem *prcm_clksrc_ctrl;
......
......@@ -40,7 +40,7 @@
#include "clock.h"
#include "clock2xxx.h"
#include "opp2xxx.h"
#include "cm.h"
#include "cm2xxx_3xxx.h"
#include "cm-regbits-24xx.h"
const struct prcm_config *curr_prcm_set;
......
......@@ -24,7 +24,6 @@
#include <plat/clock.h>
#include "clock.h"
#include "cm.h"
#include "cm-regbits-24xx.h"
#include "cm-regbits-34xx.h"
......
......@@ -29,9 +29,7 @@
#include <plat/prcm.h>
#include "clock.h"
#include "prm.h"
#include "prm-regbits-24xx.h"
#include "cm.h"
#include "cm2xxx_3xxx.h"
#include "cm-regbits-24xx.h"
#include "cm-regbits-34xx.h"
......
......@@ -22,8 +22,8 @@
#include "clock.h"
#include "clock2xxx.h"
#include "opp2xxx.h"
#include "prm.h"
#include "cm.h"
#include "cm2xxx_3xxx.h"
#include "prm2xxx_3xxx.h"
#include "prm-regbits-24xx.h"
#include "cm-regbits-24xx.h"
#include "sdrc.h"
......
......@@ -25,7 +25,7 @@
#include "clock.h"
#include "clock2xxx.h"
#include "cm.h"
#include "cm2xxx_3xxx.h"
#include "cm-regbits-24xx.h"
/**
......
......@@ -22,8 +22,8 @@
#include "clock.h"
#include "clock2xxx.h"
#include "opp2xxx.h"
#include "prm.h"
#include "cm.h"
#include "cm2xxx_3xxx.h"
#include "prm2xxx_3xxx.h"
#include "prm-regbits-24xx.h"
#include "cm-regbits-24xx.h"
#include "sdrc.h"
......
......@@ -25,7 +25,7 @@
#include "clock.h"
#include "clock34xx.h"
#include "cm.h"
#include "cm2xxx_3xxx.h"
#include "cm-regbits-34xx.h"
/**
......
......@@ -25,7 +25,7 @@
#include "clock.h"
#include "clock3517.h"
#include "cm.h"
#include "cm2xxx_3xxx.h"
#include "cm-regbits-34xx.h"
/*
......
......@@ -25,9 +25,9 @@
#include "clock.h"
#include "clock3xxx.h"
#include "prm.h"
#include "prm2xxx_3xxx.h"
#include "prm-regbits-34xx.h"
#include "cm.h"
#include "cm2xxx_3xxx.h"
#include "cm-regbits-34xx.h"
/*
......
......@@ -28,9 +28,9 @@
#include "clock36xx.h"
#include "clock3517.h"
#include "cm.h"
#include "cm2xxx_3xxx.h"
#include "cm-regbits-34xx.h"
#include "prm.h"
#include "prm2xxx_3xxx.h"
#include "prm-regbits-34xx.h"
#include "control.h"
......
......@@ -33,11 +33,15 @@
#include "cm1_44xx.h"
#include "cm2_44xx.h"
#include "cm-regbits-44xx.h"
#include "prm.h"
#include "prm44xx.h"
#include "prm44xx.h"
#include "prm-regbits-44xx.h"
#include "control.h"
/* OMAP4 modulemode control */
#define OMAP4430_MODULEMODE_HWCTRL 0
#define OMAP4430_MODULEMODE_SWCTRL 1
/* Root clocks */
static struct clk extalt_clkin_ck = {
......
......@@ -27,9 +27,10 @@
#include <linux/bitops.h>
#include "prm.h"
#include "prm2xxx_3xxx.h"
#include "prm-regbits-24xx.h"
#include "cm.h"
#include "cm2xxx_3xxx.h"
#include "cm2xxx_3xxx.h"
#include <plat/clock.h>
#include <plat/powerdomain.h>
......
......@@ -36,8 +36,8 @@
#include <linux/io.h>
#include <plat/clockdomain.h>
#include "cm.h"
#include "prm.h"
#include "prm2xxx_3xxx.h"
#include "cm2xxx_3xxx.h"
#include "cm-regbits-24xx.h"
#include "cm-regbits-34xx.h"
#include "cm-regbits-44xx.h"
......
......@@ -27,6 +27,8 @@
#include <linux/io.h>
#include <plat/clockdomain.h>
#include "cm1_44xx.h"
#include "cm2_44xx.h"
#include "cm1_44xx.h"
#include "cm2_44xx.h"
......
......@@ -14,8 +14,6 @@
* published by the Free Software Foundation.
*/
#include "cm.h"
/* Bits shared between registers */
/* CM_FCLKEN1_CORE and CM_ICLKEN1_CORE shared bits */
......
......@@ -14,8 +14,6 @@
* published by the Free Software Foundation.
*/
#include "cm.h"
/* Bits shared between registers */
/* CM_FCLKEN1_CORE and CM_ICLKEN1_CORE shared bits */
......
......@@ -22,9 +22,6 @@
#ifndef __ARCH_ARM_MACH_OMAP2_CM_REGBITS_44XX_H
#define __ARCH_ARM_MACH_OMAP2_CM_REGBITS_44XX_H
#include "cm.h"
/*
* Used by CM_L3_1_DYNAMICDEP, CM_L3_1_DYNAMICDEP_RESTORE, CM_MPU_DYNAMICDEP,
* CM_TESLA_DYNAMICDEP
......
#ifndef __ARCH_ASM_MACH_OMAP2_CM_H
#define __ARCH_ASM_MACH_OMAP2_CM_H
/*
* OMAP2/3 Clock Management (CM) register definitions
* OMAP2+ Clock Management prototypes
*
* Copyright (C) 2007-2009 Texas Instruments, Inc.
* Copyright (C) 2007-2009 Nokia Corporation
......@@ -13,133 +10,8 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include "prcm-common.h"
#define OMAP2420_CM_REGADDR(module, reg) \
OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
#define OMAP2430_CM_REGADDR(module, reg) \
OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
#define OMAP34XX_CM_REGADDR(module, reg) \
OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
#include "cm44xx.h"
/*
* Architecture-specific global CM registers
* Use cm_{read,write}_reg() with these registers.
* These registers appear once per CM module.
*/
#define OMAP3430_CM_REVISION OMAP34XX_CM_REGADDR(OCP_MOD, 0x0000)
#define OMAP3430_CM_SYSCONFIG OMAP34XX_CM_REGADDR(OCP_MOD, 0x0010)
#define OMAP3430_CM_POLCTRL OMAP34XX_CM_REGADDR(OCP_MOD, 0x009c)
#define OMAP3_CM_CLKOUT_CTRL_OFFSET 0x0070
#define OMAP3430_CM_CLKOUT_CTRL OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
/*
* Module specific CM registers from CM_BASE + domain offset
* Use cm_{read,write}_mod_reg() with these registers.
* These register offsets generally appear in more than one PRCM submodule.
*/
/* Common between 24xx and 34xx */
#define CM_FCLKEN 0x0000
#define CM_FCLKEN1 CM_FCLKEN
#define CM_CLKEN CM_FCLKEN
#define CM_ICLKEN 0x0010
#define CM_ICLKEN1 CM_ICLKEN
#define CM_ICLKEN2 0x0014
#define CM_ICLKEN3 0x0018
#define CM_IDLEST 0x0020
#define CM_IDLEST1 CM_IDLEST
#define CM_IDLEST2 0x0024
#define CM_AUTOIDLE 0x0030
#define CM_AUTOIDLE1 CM_AUTOIDLE
#define CM_AUTOIDLE2 0x0034
#define CM_AUTOIDLE3 0x0038
#define CM_CLKSEL 0x0040
#define CM_CLKSEL1 CM_CLKSEL
#define CM_CLKSEL2 0x0044
#define OMAP2_CM_CLKSTCTRL 0x0048
#define OMAP4_CM_CLKSTCTRL 0x0000
/* Architecture-specific registers */
#define OMAP24XX_CM_FCLKEN2 0x0004
#define OMAP24XX_CM_ICLKEN4 0x001c
#define OMAP24XX_CM_AUTOIDLE4 0x003c
#define OMAP2430_CM_IDLEST3 0x0028
#define OMAP3430_CM_CLKEN_PLL 0x0004
#define OMAP3430ES2_CM_CLKEN2 0x0004
#define OMAP3430ES2_CM_FCLKEN3 0x0008
#define OMAP3430_CM_IDLEST_PLL CM_IDLEST2
#define OMAP3430_CM_AUTOIDLE_PLL CM_AUTOIDLE2
#define OMAP3430ES2_CM_AUTOIDLE2_PLL CM_AUTOIDLE2
#define OMAP3430_CM_CLKSEL1 CM_CLKSEL
#define OMAP3430_CM_CLKSEL1_PLL CM_CLKSEL
#define OMAP3430_CM_CLKSEL2_PLL CM_CLKSEL2
#define OMAP3430_CM_SLEEPDEP CM_CLKSEL2
#define OMAP3430_CM_CLKSEL3 OMAP2_CM_CLKSTCTRL
#define OMAP3430_CM_CLKSTST 0x004c
#define OMAP3430ES2_CM_CLKSEL4 0x004c
#define OMAP3430ES2_CM_CLKSEL5 0x0050
#define OMAP3430_CM_CLKSEL2_EMU 0x0050
#define OMAP3430_CM_CLKSEL3_EMU 0x0054
/* CM2.CEFUSE_CM2 register offsets */
/* OMAP4 modulemode control */
#define OMAP4430_MODULEMODE_HWCTRL 0
#define OMAP4430_MODULEMODE_SWCTRL 1
/* Clock management domain register get/set */
#ifndef __ASSEMBLER__
extern u32 cm_read_mod_reg(s16 module, u16 idx);
extern void cm_write_mod_reg(u32 val, s16 module, u16 idx);
extern u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
extern int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id,
u8 idlest_shift);
extern int omap4_cm_wait_module_ready(void __iomem *clkctrl_reg);
static inline u32 cm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
{
return cm_rmw_mod_reg_bits(bits, bits, module, idx);
}
static inline u32 cm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
{
return cm_rmw_mod_reg_bits(bits, 0x0, module, idx);
}
#endif
/* CM register bits shared between 24XX and 3430 */
/* CM_CLKSEL_GFX */
#define OMAP_CLKSEL_GFX_SHIFT 0
#define OMAP_CLKSEL_GFX_MASK (0x7 << 0)
/* CM_ICLKEN_GFX */
#define OMAP_EN_GFX_SHIFT 0
#define OMAP_EN_GFX_MASK (1 << 0)
/* CM_IDLEST_GFX */
#define OMAP_ST_GFX_MASK (1 << 0)
/* CM_IDLEST indicator */
#define OMAP24XX_CM_IDLEST_VAL 0
#define OMAP34XX_CM_IDLEST_VAL 1
#ifndef __ARCH_ASM_MACH_OMAP2_CM_H
#define __ARCH_ASM_MACH_OMAP2_CM_H
/*
* MAX_MODULE_READY_TIME: max duration in microseconds to wait for the
......
......@@ -10,7 +10,6 @@
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
......@@ -19,11 +18,10 @@
#include <linux/err.h>
#include <linux/io.h>
#include <asm/atomic.h>
#include <plat/common.h>
#include "cm.h"
#include "cm2xxx_3xxx.h"
#include "cm-regbits-24xx.h"
#include "cm-regbits-34xx.h"
......@@ -31,6 +29,40 @@ static const u8 cm_idlest_offs[] = {
CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3
};
u32 cm_read_mod_reg(s16 module, u16 idx)
{
return __raw_readl(cm_base + module + idx);
}
void cm_write_mod_reg(u32 val, s16 module, u16 idx)
{
__raw_writel(val, cm_base + module + idx);
}
/* Read-modify-write a register in a CM module. Caller must lock */
u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx)
{
u32 v;
v = cm_read_mod_reg(module, idx);
v &= ~mask;
v |= bits;
cm_write_mod_reg(v, module, idx);
return v;
}
u32 cm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
{
return cm_rmw_mod_reg_bits(bits, bits, module, idx);
}
u32 cm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
{
return cm_rmw_mod_reg_bits(bits, 0x0, module, idx);
}
/**
* omap2_cm_wait_idlest_ready - wait for a module to leave idle or standby
* @prcm_mod: PRCM module offset
......@@ -59,7 +91,6 @@ int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift)
else
BUG();
/* XXX should be OMAP2 CM */
omap_test_timeout(((cm_read_mod_reg(prcm_mod, cm_idlest_reg) & mask) == ena),
MAX_MODULE_READY_TIME, i);
......
/*
* OMAP2/3 Clock Management (CM) register definitions
*
* Copyright (C) 2007-2009 Texas Instruments, Inc.
* Copyright (C) 2007-2010 Nokia Corporation
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* The CM hardware modules on the OMAP2/3 are quite similar to each
* other. The CM modules/instances on OMAP4 are quite different, so
* they are handled in a separate file.
*/
#ifndef __ARCH_ASM_MACH_OMAP2_CM2XXX_3XXX_H
#define __ARCH_ASM_MACH_OMAP2_CM2XXX_3XXX_H
#include "prcm-common.h"
#define OMAP2420_CM_REGADDR(module, reg) \
OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
#define OMAP2430_CM_REGADDR(module, reg) \
OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
#define OMAP34XX_CM_REGADDR(module, reg) \
OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
/*
* OMAP3-specific global CM registers
* Use cm_{read,write}_reg() with these registers.
* These registers appear once per CM module.
*/
#define OMAP3430_CM_REVISION OMAP34XX_CM_REGADDR(OCP_MOD, 0x0000)
#define OMAP3430_CM_SYSCONFIG OMAP34XX_CM_REGADDR(OCP_MOD, 0x0010)
#define OMAP3430_CM_POLCTRL OMAP34XX_CM_REGADDR(OCP_MOD, 0x009c)
#define OMAP3_CM_CLKOUT_CTRL_OFFSET 0x0070
#define OMAP3430_CM_CLKOUT_CTRL OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
/*
* Module specific CM register offsets from CM_BASE + domain offset
* Use cm_{read,write}_mod_reg() with these registers.
* These register offsets generally appear in more than one PRCM submodule.
*/
/* Common between OMAP2 and OMAP3 */
#define CM_FCLKEN 0x0000
#define CM_FCLKEN1 CM_FCLKEN
#define CM_CLKEN CM_FCLKEN
#define CM_ICLKEN 0x0010
#define CM_ICLKEN1 CM_ICLKEN
#define CM_ICLKEN2 0x0014
#define CM_ICLKEN3 0x0018
#define CM_IDLEST 0x0020
#define CM_IDLEST1 CM_IDLEST
#define CM_IDLEST2 0x0024
#define CM_AUTOIDLE 0x0030
#define CM_AUTOIDLE1 CM_AUTOIDLE
#define CM_AUTOIDLE2 0x0034
#define CM_AUTOIDLE3 0x0038
#define CM_CLKSEL 0x0040
#define CM_CLKSEL1 CM_CLKSEL
#define CM_CLKSEL2 0x0044
#define OMAP2_CM_CLKSTCTRL 0x0048
/* OMAP2-specific register offsets */
#define OMAP24XX_CM_FCLKEN2 0x0004
#define OMAP24XX_CM_ICLKEN4 0x001c
#define OMAP24XX_CM_AUTOIDLE4 0x003c
#define OMAP2430_CM_IDLEST3 0x0028
/* OMAP3-specific register offsets */
#define OMAP3430_CM_CLKEN_PLL 0x0004
#define OMAP3430ES2_CM_CLKEN2 0x0004
#define OMAP3430ES2_CM_FCLKEN3 0x0008
#define OMAP3430_CM_IDLEST_PLL CM_IDLEST2
#define OMAP3430_CM_AUTOIDLE_PLL CM_AUTOIDLE2
#define OMAP3430ES2_CM_AUTOIDLE2_PLL CM_AUTOIDLE2
#define OMAP3430_CM_CLKSEL1 CM_CLKSEL
#define OMAP3430_CM_CLKSEL1_PLL CM_CLKSEL
#define OMAP3430_CM_CLKSEL2_PLL CM_CLKSEL2
#define OMAP3430_CM_SLEEPDEP CM_CLKSEL2
#define OMAP3430_CM_CLKSEL3 OMAP2_CM_CLKSTCTRL
#define OMAP3430_CM_CLKSTST 0x004c
#define OMAP3430ES2_CM_CLKSEL4 0x004c
#define OMAP3430ES2_CM_CLKSEL5 0x0050
#define OMAP3430_CM_CLKSEL2_EMU 0x0050
#define OMAP3430_CM_CLKSEL3_EMU 0x0054
/* CM_IDLEST bit field values to indicate deasserted IdleReq */
#define OMAP24XX_CM_IDLEST_VAL 0
#define OMAP34XX_CM_IDLEST_VAL 1
/* Clock management domain register get/set */
#ifndef __ASSEMBLER__
extern u32 cm_read_mod_reg(s16 module, u16 idx);
extern void cm_write_mod_reg(u32 val, s16 module, u16 idx);
extern u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
extern int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id,
u8 idlest_shift);
extern u32 cm_set_mod_reg_bits(u32 bits, s16 module, s16 idx);
extern u32 cm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx);
#endif
/* CM register bits shared between 24XX and 3430 */
/* CM_CLKSEL_GFX */
#define OMAP_CLKSEL_GFX_SHIFT 0
#define OMAP_CLKSEL_GFX_MASK (0x7 << 0)
/* CM_ICLKEN_GFX */
#define OMAP_EN_GFX_SHIFT 0
#define OMAP_EN_GFX_MASK (1 << 0)
/* CM_IDLEST_GFX */
#define OMAP_ST_GFX_MASK (1 << 0)
#endif
......@@ -18,6 +18,7 @@
#include "prcm-common.h"
#include "cm.h"
#define OMAP4_CM_CLKSTCTRL 0x0000
......
......@@ -23,7 +23,7 @@
#include <plat/common.h>
#include "cm.h"
#include "cm44xx.h"
#include "cm-regbits-44xx.h"
/**
......
......@@ -20,8 +20,8 @@
#include "cm-regbits-34xx.h"
#include "prm-regbits-34xx.h"
#include "cm.h"
#include "prm.h"
#include "prm2xxx_3xxx.h"
#include "cm2xxx_3xxx.h"
#include "sdrc.h"
#include "pm.h"
#include "control.h"
......
......@@ -32,9 +32,7 @@
#include <asm/clkdev.h>
#include "clock.h"
#include "prm.h"
#include "prm-regbits-34xx.h"
#include "cm.h"
#include "cm2xxx_3xxx.h"
#include "cm-regbits-34xx.h"
/* CM_AUTOIDLE_PLL*.AUTO_* bit values */
......
......@@ -11,9 +11,16 @@
* published by the Free Software Foundation.
*/
/*
* XXX The function pointers to the PRM/CM functions are incorrect and
* should be removed. No device driver should be changing PRM/CM bits
* directly; that's a layering violation -- those bits are the responsibility
* of the OMAP PM core code.
*/
#include <linux/platform_device.h>
#include "prm.h"
#include "cm.h"
#include "cm2xxx_3xxx.h"
#include "prm2xxx_3xxx.h"
#ifdef CONFIG_BRIDGE_DVFS
#include <plat/omap-pm.h>
#endif
......
......@@ -145,8 +145,9 @@
#include <plat/omap_hwmod.h>
#include <plat/prcm.h>
#include "cm.h"
#include "prm.h"
#include "cm2xxx_3xxx.h"
#include "cm44xx.h"
#include "prm2xxx_3xxx.h"
#include "prm44xx.h"
/* Maximum microseconds to wait for OMAP module to softreset */
......
......@@ -33,8 +33,8 @@
#include <plat/clockdomain.h>
#include <plat/dmtimer.h>
#include "prm.h"
#include "cm.h"
#include "cm2xxx_3xxx.h"
#include "prm2xxx_3xxx.h"
#include "pm.h"
int omap2_pm_debug;
......
......@@ -42,9 +42,9 @@
#include <plat/dma.h>
#include <plat/board.h>
#include "prm.h"
#include "prm2xxx_3xxx.h"
#include "prm-regbits-24xx.h"
#include "cm.h"
#include "cm2xxx_3xxx.h"
#include "cm-regbits-24xx.h"
#include "sdrc.h"
#include "pm.h"
......
......@@ -41,11 +41,11 @@
#include <asm/tlbflush.h>
#include "cm.h"
#include "cm2xxx_3xxx.h"
#include "cm-regbits-34xx.h"
#include "prm-regbits-34xx.h"
#include "prm.h"
#include "prm2xxx_3xxx.h"
#include "pm.h"
#include "sdrc.h"
#include "control.h"
......
......@@ -19,6 +19,9 @@
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/string.h>
#include "cm2xxx_3xxx.h"
#include "cm44xx.h"
#include "prm2xxx_3xxx.h"
#include "prm44xx.h"
#include <plat/cpu.h>
......
......@@ -18,6 +18,7 @@
#include <plat/powerdomain.h>
#include <plat/prcm.h>
#include "prm2xxx_3xxx.h"
#include "prm44xx.h"
#include "prm-regbits-44xx.h"
#include "powerdomains.h"
......
......@@ -19,10 +19,8 @@
#include "powerdomains.h"
#include "prcm-common.h"
#include "prm.h"
#include "prm2xxx_3xxx.h"
#include "prm-regbits-24xx.h"
#include "cm.h"
#include "cm-regbits-24xx.h"
/* 24XX powerdomains and dependencies */
......
......@@ -19,9 +19,9 @@
#include "powerdomains.h"
#include "prcm-common.h"
#include "prm.h"
#include "prm2xxx_3xxx.h"
#include "prm-regbits-34xx.h"
#include "cm.h"
#include "cm2xxx_3xxx.h"
#include "cm-regbits-34xx.h"
/*
......
......@@ -26,7 +26,6 @@
#include "powerdomains.h"
#include "prcm-common.h"
#include "prm.h"
#include "prm-regbits-44xx.h"
#include "prm44xx.h"
#include "prcm_mpu44xx.h"
......
......@@ -396,5 +396,11 @@
*/
#define MAX_MODULE_HARDRESET_WAIT 10000
# ifndef __ASSEMBLER__
extern void __iomem *prm_base;
extern void __iomem *cm_base;
extern void __iomem *cm2_base;
# endif
#endif
......@@ -29,16 +29,17 @@
#include "clock.h"
#include "clock2xxx.h"
#include "cm.h"
#include "prm.h"
#include "cm2xxx_3xxx.h"
#include "cm44xx.h"
#include "prm2xxx_3xxx.h"
#include "prm44xx.h"
#include "prm-regbits-24xx.h"
#include "prm-regbits-44xx.h"
#include "control.h"
static void __iomem *prm_base;
static void __iomem *cm_base;
static void __iomem *cm2_base;
void __iomem *prm_base;
void __iomem *cm_base;
void __iomem *cm2_base;
#define MAX_MODULE_ENABLE_WAIT 100000
......@@ -158,56 +159,6 @@ void omap_prcm_arch_reset(char mode, const char *cmd)
prcm_offs, OMAP4_RM_RSTCTRL);
}
static inline u32 __omap_prcm_read(void __iomem *base, s16 module, u16 reg)
{
BUG_ON(!base);
return __raw_readl(base + module + reg);
}
static inline void __omap_prcm_write(u32 value, void __iomem *base,
s16 module, u16 reg)
{
BUG_ON(!base);
__raw_writel(value, base + module + reg);
}
/* Read a register in a PRM module */
u32 prm_read_mod_reg(s16 module, u16 idx)
{
return __omap_prcm_read(prm_base, module, idx);
}
/* Write into a register in a PRM module */
void prm_write_mod_reg(u32 val, s16 module, u16 idx)
{
__omap_prcm_write(val, prm_base, module, idx);
}
/* Read-modify-write a register in a PRM module. Caller must lock */
u32 prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx)
{
u32 v;
v = prm_read_mod_reg(module, idx);
v &= ~mask;
v |= bits;
prm_write_mod_reg(v, module, idx);
return v;
}
/* Read a PRM register, AND it, and shift the result down to bit 0 */
u32 prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
{
u32 v;
v = prm_read_mod_reg(domain, idx);
v &= mask;
v >>= __ffs(mask);
return v;
}
/* Read a PRM register, AND it, and shift the result down to bit 0 */
u32 omap4_prm_read_bits_shift(void __iomem *reg, u32 mask)
{
......@@ -232,30 +183,6 @@ u32 omap4_prm_rmw_reg_bits(u32 mask, u32 bits, void __iomem *reg)
return v;
}
/* Read a register in a CM module */
u32 cm_read_mod_reg(s16 module, u16 idx)
{
return __omap_prcm_read(cm_base, module, idx);
}
/* Write into a register in a CM module */
void cm_write_mod_reg(u32 val, s16 module, u16 idx)
{
__omap_prcm_write(val, cm_base, module, idx);
}
/* Read-modify-write a register in a CM module. Caller must lock */
u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx)
{
u32 v;
v = cm_read_mod_reg(module, idx);
v &= ~mask;
v |= bits;
cm_write_mod_reg(v, module, idx);
return v;
}
/**
* omap2_cm_wait_idlest - wait for IDLEST bit to indicate module readiness
......@@ -266,6 +193,9 @@ u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx)
*
* Returns 1 if the module indicated readiness in time, or 0 if it
* failed to enable in roughly MAX_MODULE_ENABLE_WAIT microseconds.
*
* XXX This function is deprecated. It should be removed once the
* hwmod conversion is complete.
*/
int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, u8 idlest,
const char *name)
......
......@@ -14,7 +14,7 @@
* published by the Free Software Foundation.
*/
#include "prm.h"
#include "prm2xxx_3xxx.h"
/* Bits shared between registers */
......
#ifndef __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_34XX_H
#define __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_34XX_H
/*
* OMAP3430 Power/Reset Management register bits
*
......@@ -13,8 +10,11 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_34XX_H
#define __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_34XX_H
#include "prm.h"
#include "prm2xxx_3xxx.h"
/* Shared register bits */
......
......@@ -22,8 +22,6 @@
#ifndef __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_44XX_H
#define __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_44XX_H
#include "prm.h"
/*
* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
......
#ifndef __ARCH_ARM_MACH_OMAP2_PRM_H
#define __ARCH_ARM_MACH_OMAP2_PRM_H
/*
* OMAP2/3 Power/Reset Management (PRM) register definitions
* OMAP2/3/4 Power/Reset Management (PRM) bitfield definitions
*
* Copyright (C) 2007-2009 Texas Instruments, Inc.
* Copyright (C) 2010 Nokia Corporation
*
* Written by Paul Walmsley
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ARCH_ARM_MACH_OMAP2_PRM_H
#define __ARCH_ARM_MACH_OMAP2_PRM_H
#include "prcm-common.h"
#define OMAP2420_PRM_REGADDR(module, reg) \
OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
#define OMAP2430_PRM_REGADDR(module, reg) \
OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
#define OMAP34XX_PRM_REGADDR(module, reg) \
OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
/*
* Architecture-specific global PRM registers
* Use __raw_{read,write}l() with these registers.
*
* With a few exceptions, these are the register names beginning with
* PRCM_* on 24xx, and PRM_* on 34xx. (The exceptions are the
* IRQSTATUS and IRQENABLE bits.)
*
*/
#define OMAP2_PRCM_REVISION_OFFSET 0x0000
#define OMAP2420_PRCM_REVISION OMAP2420_PRM_REGADDR(OCP_MOD, 0x0000)
#define OMAP2_PRCM_SYSCONFIG_OFFSET 0x0010
#define OMAP2420_PRCM_SYSCONFIG OMAP2420_PRM_REGADDR(OCP_MOD, 0x0010)
#define OMAP2_PRCM_IRQSTATUS_MPU_OFFSET 0x0018
#define OMAP2420_PRCM_IRQSTATUS_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x0018)
#define OMAP2_PRCM_IRQENABLE_MPU_OFFSET 0x001c
#define OMAP2420_PRCM_IRQENABLE_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x001c)
#define OMAP2_PRCM_VOLTCTRL_OFFSET 0x0050
#define OMAP2420_PRCM_VOLTCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0050)
#define OMAP2_PRCM_VOLTST_OFFSET 0x0054
#define OMAP2420_PRCM_VOLTST OMAP2420_PRM_REGADDR(OCP_MOD, 0x0054)
#define OMAP2_PRCM_CLKSRC_CTRL_OFFSET 0x0060
#define OMAP2420_PRCM_CLKSRC_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0060)
#define OMAP2_PRCM_CLKOUT_CTRL_OFFSET 0x0070
#define OMAP2420_PRCM_CLKOUT_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0070)
#define OMAP2_PRCM_CLKEMUL_CTRL_OFFSET 0x0078
#define OMAP2420_PRCM_CLKEMUL_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0078)
#define OMAP2_PRCM_CLKCFG_CTRL_OFFSET 0x0080
#define OMAP2420_PRCM_CLKCFG_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0080)
#define OMAP2_PRCM_CLKCFG_STATUS_OFFSET 0x0084
#define OMAP2420_PRCM_CLKCFG_STATUS OMAP2420_PRM_REGADDR(OCP_MOD, 0x0084)
#define OMAP2_PRCM_VOLTSETUP_OFFSET 0x0090
#define OMAP2420_PRCM_VOLTSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0090)
#define OMAP2_PRCM_CLKSSETUP_OFFSET 0x0094
#define OMAP2420_PRCM_CLKSSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0094)
#define OMAP2_PRCM_POLCTRL_OFFSET 0x0098
#define OMAP2420_PRCM_POLCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0098)
#define OMAP2430_PRCM_REVISION OMAP2430_PRM_REGADDR(OCP_MOD, 0x0000)
#define OMAP2430_PRCM_SYSCONFIG OMAP2430_PRM_REGADDR(OCP_MOD, 0x0010)
#define OMAP2430_PRCM_IRQSTATUS_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x0018)
#define OMAP2430_PRCM_IRQENABLE_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x001c)
#define OMAP2430_PRCM_VOLTCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0050)
#define OMAP2430_PRCM_VOLTST OMAP2430_PRM_REGADDR(OCP_MOD, 0x0054)
#define OMAP2430_PRCM_CLKSRC_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0060)
#define OMAP2430_PRCM_CLKOUT_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0070)
#define OMAP2430_PRCM_CLKEMUL_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0078)
#define OMAP2430_PRCM_CLKCFG_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0080)
#define OMAP2430_PRCM_CLKCFG_STATUS OMAP2430_PRM_REGADDR(OCP_MOD, 0x0084)
#define OMAP2430_PRCM_VOLTSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0090)
#define OMAP2430_PRCM_CLKSSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0094)
#define OMAP2430_PRCM_POLCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0098)
#define OMAP3_PRM_REVISION_OFFSET 0x0004
#define OMAP3430_PRM_REVISION OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0004)
#define OMAP3_PRM_SYSCONFIG_OFFSET 0x0014
#define OMAP3430_PRM_SYSCONFIG OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0014)
#define OMAP3_PRM_IRQSTATUS_MPU_OFFSET 0x0018
#define OMAP3430_PRM_IRQSTATUS_MPU OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0018)
#define OMAP3_PRM_IRQENABLE_MPU_OFFSET 0x001c
#define OMAP3430_PRM_IRQENABLE_MPU OMAP34XX_PRM_REGADDR(OCP_MOD, 0x001c)
#define OMAP3_PRM_VC_SMPS_SA_OFFSET 0x0020
#define OMAP3430_PRM_VC_SMPS_SA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0020)
#define OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET 0x0024
#define OMAP3430_PRM_VC_SMPS_VOL_RA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0024)
#define OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET 0x0028
#define OMAP3430_PRM_VC_SMPS_CMD_RA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0028)
#define OMAP3_PRM_VC_CMD_VAL_0_OFFSET 0x002c
#define OMAP3430_PRM_VC_CMD_VAL_0 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x002c)
#define OMAP3_PRM_VC_CMD_VAL_1_OFFSET 0x0030
#define OMAP3430_PRM_VC_CMD_VAL_1 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0030)
#define OMAP3_PRM_VC_CH_CONF_OFFSET 0x0034
#define OMAP3430_PRM_VC_CH_CONF OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0034)
#define OMAP3_PRM_VC_I2C_CFG_OFFSET 0x0038
#define OMAP3430_PRM_VC_I2C_CFG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0038)
#define OMAP3_PRM_VC_BYPASS_VAL_OFFSET 0x003c
#define OMAP3430_PRM_VC_BYPASS_VAL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x003c)
#define OMAP3_PRM_RSTCTRL_OFFSET 0x0050
#define OMAP3430_PRM_RSTCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0050)
#define OMAP3_PRM_RSTTIME_OFFSET 0x0054
#define OMAP3430_PRM_RSTTIME OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0054)
#define OMAP3_PRM_RSTST_OFFSET 0x0058
#define OMAP3430_PRM_RSTST OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0058)
#define OMAP3_PRM_VOLTCTRL_OFFSET 0x0060
#define OMAP3430_PRM_VOLTCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0060)
#define OMAP3_PRM_SRAM_PCHARGE_OFFSET 0x0064
#define OMAP3430_PRM_SRAM_PCHARGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0064)
#define OMAP3_PRM_CLKSRC_CTRL_OFFSET 0x0070
#define OMAP3430_PRM_CLKSRC_CTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0070)
#define OMAP3_PRM_VOLTSETUP1_OFFSET 0x0090
#define OMAP3430_PRM_VOLTSETUP1 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0090)
#define OMAP3_PRM_VOLTOFFSET_OFFSET 0x0094
#define OMAP3430_PRM_VOLTOFFSET OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0094)
#define OMAP3_PRM_CLKSETUP_OFFSET 0x0098
#define OMAP3430_PRM_CLKSETUP OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0098)
#define OMAP3_PRM_POLCTRL_OFFSET 0x009c
#define OMAP3430_PRM_POLCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x009c)
#define OMAP3_PRM_VOLTSETUP2_OFFSET 0x00a0
#define OMAP3430_PRM_VOLTSETUP2 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00a0)
#define OMAP3_PRM_VP1_CONFIG_OFFSET 0x00b0
#define OMAP3430_PRM_VP1_CONFIG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b0)
#define OMAP3_PRM_VP1_VSTEPMIN_OFFSET 0x00b4
#define OMAP3430_PRM_VP1_VSTEPMIN OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b4)
#define OMAP3_PRM_VP1_VSTEPMAX_OFFSET 0x00b8
#define OMAP3430_PRM_VP1_VSTEPMAX OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b8)
#define OMAP3_PRM_VP1_VLIMITTO_OFFSET 0x00bc
#define OMAP3430_PRM_VP1_VLIMITTO OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00bc)
#define OMAP3_PRM_VP1_VOLTAGE_OFFSET 0x00c0
#define OMAP3430_PRM_VP1_VOLTAGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c0)
#define OMAP3_PRM_VP1_STATUS_OFFSET 0x00c4
#define OMAP3430_PRM_VP1_STATUS OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c4)
#define OMAP3_PRM_VP2_CONFIG_OFFSET 0x00d0
#define OMAP3430_PRM_VP2_CONFIG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d0)
#define OMAP3_PRM_VP2_VSTEPMIN_OFFSET 0x00d4
#define OMAP3430_PRM_VP2_VSTEPMIN OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d4)
#define OMAP3_PRM_VP2_VSTEPMAX_OFFSET 0x00d8
#define OMAP3430_PRM_VP2_VSTEPMAX OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d8)
#define OMAP3_PRM_VP2_VLIMITTO_OFFSET 0x00dc
#define OMAP3430_PRM_VP2_VLIMITTO OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00dc)
#define OMAP3_PRM_VP2_VOLTAGE_OFFSET 0x00e0
#define OMAP3430_PRM_VP2_VOLTAGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e0)
#define OMAP3_PRM_VP2_STATUS_OFFSET 0x00e4
#define OMAP3430_PRM_VP2_STATUS OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e4)
#define OMAP3_PRM_CLKSEL_OFFSET 0x0040
#define OMAP3430_PRM_CLKSEL OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0040)
#define OMAP3_PRM_CLKOUT_CTRL_OFFSET 0x0070
#define OMAP3430_PRM_CLKOUT_CTRL OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
/*
* Module specific PRM registers from PRM_BASE + domain offset
*
* Use prm_{read,write}_mod_reg() with these registers.
*
* With a few exceptions, these are the register names beginning with
* {PM,RM}_* on both architectures. (The exceptions are the IRQSTATUS
* and IRQENABLE bits.)
*
*/
/* Registers appearing on both 24xx and 34xx */
#define OMAP2_RM_RSTCTRL 0x0050
#define OMAP2_RM_RSTTIME 0x0054
#define OMAP2_RM_RSTST 0x0058
#define OMAP2_PM_PWSTCTRL 0x00e0
#define OMAP2_PM_PWSTST 0x00e4
#define PM_WKEN 0x00a0
#define PM_WKEN1 PM_WKEN
#define PM_WKST 0x00b0
#define PM_WKST1 PM_WKST
#define PM_WKDEP 0x00c8
#define PM_EVGENCTRL 0x00d4
#define PM_EVGENONTIM 0x00d8
#define PM_EVGENOFFTIM 0x00dc
/* Omap2 specific registers */
#define OMAP24XX_PM_WKEN2 0x00a4
#define OMAP24XX_PM_WKST2 0x00b4
#define OMAP24XX_PRCM_IRQSTATUS_DSP 0x00f0 /* IVA mod */
#define OMAP24XX_PRCM_IRQENABLE_DSP 0x00f4 /* IVA mod */
#define OMAP24XX_PRCM_IRQSTATUS_IVA 0x00f8
#define OMAP24XX_PRCM_IRQENABLE_IVA 0x00fc
/* Omap3 specific registers */
#define OMAP3430ES2_PM_WKEN3 0x00f0
#define OMAP3430ES2_PM_WKST3 0x00b8
#define OMAP3430_PM_MPUGRPSEL 0x00a4
#define OMAP3430_PM_MPUGRPSEL1 OMAP3430_PM_MPUGRPSEL
#define OMAP3430ES2_PM_MPUGRPSEL3 0x00f8
#define OMAP3430_PM_IVAGRPSEL 0x00a8
#define OMAP3430_PM_IVAGRPSEL1 OMAP3430_PM_IVAGRPSEL
#define OMAP3430ES2_PM_IVAGRPSEL3 0x00f4
#define OMAP3430_PM_PREPWSTST 0x00e8
#define OMAP3430_PRM_IRQSTATUS_IVA2 0x00f8
#define OMAP3430_PRM_IRQENABLE_IVA2 0x00fc
#ifndef __ASSEMBLER__
/* Power/reset management domain register get/set */
extern u32 prm_read_mod_reg(s16 module, u16 idx);
extern void prm_write_mod_reg(u32 val, s16 module, u16 idx);
extern u32 prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
/* Read-modify-write bits in a PRM register (by domain) */
static inline u32 prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
{
return prm_rmw_mod_reg_bits(bits, bits, module, idx);
}
static inline u32 prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
{
return prm_rmw_mod_reg_bits(bits, 0x0, module, idx);
}
/* These omap2_ PRM functions apply to both OMAP2 and 3 */
int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift);
int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift);
int omap2_prm_deassert_hardreset(s16 prm_mod, u8 shift);
#endif
/*
* Bits common to specific registers
*
* The 3430 register and bit names are generally used,
* since they tend to make more sense
*/
/* PM_EVGENONTIM_MPU */
/* Named PM_EVEGENONTIM_MPU on the 24XX */
#define OMAP_ONTIMEVAL_SHIFT 0
#define OMAP_ONTIMEVAL_MASK (0xffffffff << 0)
/* PM_EVGENOFFTIM_MPU */
/* Named PM_EVEGENOFFTIM_MPU on the 24XX */
#define OMAP_OFFTIMEVAL_SHIFT 0
#define OMAP_OFFTIMEVAL_MASK (0xffffffff << 0)
/* PRM_CLKSETUP and PRCM_VOLTSETUP */
/* Named PRCM_CLKSSETUP on the 24XX */
#define OMAP_SETUP_TIME_SHIFT 0
#define OMAP_SETUP_TIME_MASK (0xffff << 0)
/* PRM_CLKSRC_CTRL */
/* Named PRCM_CLKSRC_CTRL on the 24XX */
#define OMAP_SYSCLKDIV_SHIFT 6
#define OMAP_SYSCLKDIV_MASK (0x3 << 6)
#define OMAP_AUTOEXTCLKMODE_SHIFT 3
#define OMAP_AUTOEXTCLKMODE_MASK (0x3 << 3)
#define OMAP_SYSCLKSEL_SHIFT 0
#define OMAP_SYSCLKSEL_MASK (0x3 << 0)
/* PM_EVGENCTRL_MPU */
#define OMAP_OFFLOADMODE_SHIFT 3
#define OMAP_OFFLOADMODE_MASK (0x3 << 3)
#define OMAP_ONLOADMODE_SHIFT 1
#define OMAP_ONLOADMODE_MASK (0x3 << 1)
#define OMAP_ENABLE_MASK (1 << 0)
/* PRM_RSTTIME */
/* Named RM_RSTTIME_WKUP on the 24xx */
#define OMAP_RSTTIME2_SHIFT 8
#define OMAP_RSTTIME2_MASK (0x1f << 8)
#define OMAP_RSTTIME1_SHIFT 0
#define OMAP_RSTTIME1_MASK (0xff << 0)
/* PRM_RSTCTRL */
/* Named RM_RSTCTRL_WKUP on the 24xx */
/* 2420 calls RST_DPLL3 'RST_DPLL' */
#define OMAP_RST_DPLL3_MASK (1 << 2)
#define OMAP_RST_GS_MASK (1 << 1)
/*
* Bits common to module-shared registers
*
* Not all registers of a particular type support all of these bits -
* check TRM if you are unsure
*/
/*
* 24XX: PM_PWSTST_CORE, PM_PWSTST_GFX, PM_PWSTST_MPU, PM_PWSTST_DSP
*
......@@ -323,59 +39,6 @@ int omap2_prm_deassert_hardreset(s16 prm_mod, u8 shift);
#define OMAP_POWERSTATEST_SHIFT 0
#define OMAP_POWERSTATEST_MASK (0x3 << 0)
/*
* 24XX: RM_RSTST_MPU and RM_RSTST_DSP - on 24XX, 'COREDOMAINWKUP_RST' is
* called 'COREWKUP_RST'
*
* 3430: RM_RSTST_IVA2, RM_RSTST_MPU, RM_RSTST_GFX, RM_RSTST_DSS,
* RM_RSTST_CAM, RM_RSTST_PER, RM_RSTST_NEON
*/
#define OMAP_COREDOMAINWKUP_RST_MASK (1 << 3)
/*
* 24XX: RM_RSTST_MPU, RM_RSTST_GFX, RM_RSTST_DSP
*
* 2430: RM_RSTST_MDM
*
* 3430: RM_RSTST_CORE, RM_RSTST_EMU
*/
#define OMAP_DOMAINWKUP_RST_MASK (1 << 2)
/*
* 24XX: RM_RSTST_MPU, RM_RSTST_WKUP, RM_RSTST_DSP
* On 24XX, 'GLOBALWARM_RST' is called 'GLOBALWMPU_RST'.
*
* 2430: RM_RSTST_MDM
*
* 3430: RM_RSTST_CORE, RM_RSTST_EMU
*/
#define OMAP_GLOBALWARM_RST_MASK (1 << 1)
#define OMAP_GLOBALCOLD_RST_MASK (1 << 0)
/*
* 24XX: PM_WKDEP_GFX, PM_WKDEP_MPU, PM_WKDEP_CORE, PM_WKDEP_DSP
* 2420 TRM sometimes uses "EN_WAKEUP" instead of "EN_WKUP"
*
* 2430: PM_WKDEP_MDM
*
* 3430: PM_WKDEP_IVA2, PM_WKDEP_GFX, PM_WKDEP_DSS, PM_WKDEP_CAM,
* PM_WKDEP_PER
*/
#define OMAP_EN_WKUP_SHIFT 4
#define OMAP_EN_WKUP_MASK (1 << 4)
/*
* 24XX: PM_PWSTCTRL_MPU, PM_PWSTCTRL_CORE, PM_PWSTCTRL_GFX,
* PM_PWSTCTRL_DSP
*
* 2430: PM_PWSTCTRL_MDM
*
* 3430: PM_PWSTCTRL_IVA2, PM_PWSTCTRL_CORE, PM_PWSTCTRL_GFX,
* PM_PWSTCTRL_DSS, PM_PWSTCTRL_CAM, PM_PWSTCTRL_PER,
* PM_PWSTCTRL_NEON
*/
#define OMAP_LOGICRETSTATE_MASK (1 << 2)
/*
* 24XX: PM_PWSTCTRL_MPU, PM_PWSTCTRL_CORE, PM_PWSTCTRL_GFX,
* PM_PWSTCTRL_DSP, PM_PWSTST_MPU
......@@ -390,11 +53,4 @@ int omap2_prm_deassert_hardreset(s16 prm_mod, u8 shift);
#define OMAP_POWERSTATE_MASK (0x3 << 0)
/*
* MAX_MODULE_HARDRESET_WAIT: Maximum microseconds to wait for an OMAP
* submodule to exit hardreset
*/
#define MAX_MODULE_HARDRESET_WAIT 10000
#endif
......@@ -12,18 +12,65 @@
*/
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/io.h>
#include <plat/common.h>
#include <plat/cpu.h>
#include <plat/prcm.h>
#include "prm.h"
#include "prm2xxx_3xxx.h"
#include "cm2xxx_3xxx.h"
#include "prm-regbits-24xx.h"
#include "prm-regbits-34xx.h"
u32 prm_read_mod_reg(s16 module, u16 idx)
{
return __raw_readl(prm_base + module + idx);
}
void prm_write_mod_reg(u32 val, s16 module, u16 idx)
{
__raw_writel(val, prm_base + module + idx);
}
/* Read-modify-write a register in a PRM module. Caller must lock */
u32 prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx)
{
u32 v;
v = prm_read_mod_reg(module, idx);
v &= ~mask;
v |= bits;
prm_write_mod_reg(v, module, idx);
return v;
}
/* Read a PRM register, AND it, and shift the result down to bit 0 */
u32 prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
{
u32 v;
v = prm_read_mod_reg(domain, idx);
v &= mask;
v >>= __ffs(mask);
return v;
}
u32 prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
{
return prm_rmw_mod_reg_bits(bits, bits, module, idx);
}
u32 prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
{
return prm_rmw_mod_reg_bits(bits, 0x0, module, idx);
}
/**
* omap2_prm_is_hardreset_asserted - read the HW reset line state of
* submodules contained in the hwmod module
......
/*
* OMAP2/3 Power/Reset Management (PRM) register definitions
*
* Copyright (C) 2007-2009 Texas Instruments, Inc.
* Copyright (C) 2008-2010 Nokia Corporation
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* The PRM hardware modules on the OMAP2/3 are quite similar to each
* other. The PRM on OMAP4 has a new register layout, and is handled
* in a separate file.
*/
#ifndef __ARCH_ARM_MACH_OMAP2_PRM2XXX_3XXX_H
#define __ARCH_ARM_MACH_OMAP2_PRM2XXX_3XXX_H
#include "prcm-common.h"
#include "prm.h"
#define OMAP2420_PRM_REGADDR(module, reg) \
OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
#define OMAP2430_PRM_REGADDR(module, reg) \
OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
#define OMAP34XX_PRM_REGADDR(module, reg) \
OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
/*
* OMAP2-specific global PRM registers
* Use __raw_{read,write}l() with these registers.
*
* With a few exceptions, these are the register names beginning with
* PRCM_* on 24xx. (The exceptions are the IRQSTATUS and IRQENABLE
* bits.)
*
*/
#define OMAP2_PRCM_REVISION_OFFSET 0x0000
#define OMAP2420_PRCM_REVISION OMAP2420_PRM_REGADDR(OCP_MOD, 0x0000)
#define OMAP2_PRCM_SYSCONFIG_OFFSET 0x0010
#define OMAP2420_PRCM_SYSCONFIG OMAP2420_PRM_REGADDR(OCP_MOD, 0x0010)
#define OMAP2_PRCM_IRQSTATUS_MPU_OFFSET 0x0018
#define OMAP2420_PRCM_IRQSTATUS_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x0018)
#define OMAP2_PRCM_IRQENABLE_MPU_OFFSET 0x001c
#define OMAP2420_PRCM_IRQENABLE_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x001c)
#define OMAP2_PRCM_VOLTCTRL_OFFSET 0x0050
#define OMAP2420_PRCM_VOLTCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0050)
#define OMAP2_PRCM_VOLTST_OFFSET 0x0054
#define OMAP2420_PRCM_VOLTST OMAP2420_PRM_REGADDR(OCP_MOD, 0x0054)
#define OMAP2_PRCM_CLKSRC_CTRL_OFFSET 0x0060
#define OMAP2420_PRCM_CLKSRC_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0060)
#define OMAP2_PRCM_CLKOUT_CTRL_OFFSET 0x0070
#define OMAP2420_PRCM_CLKOUT_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0070)
#define OMAP2_PRCM_CLKEMUL_CTRL_OFFSET 0x0078
#define OMAP2420_PRCM_CLKEMUL_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0078)
#define OMAP2_PRCM_CLKCFG_CTRL_OFFSET 0x0080
#define OMAP2420_PRCM_CLKCFG_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0080)
#define OMAP2_PRCM_CLKCFG_STATUS_OFFSET 0x0084
#define OMAP2420_PRCM_CLKCFG_STATUS OMAP2420_PRM_REGADDR(OCP_MOD, 0x0084)
#define OMAP2_PRCM_VOLTSETUP_OFFSET 0x0090
#define OMAP2420_PRCM_VOLTSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0090)
#define OMAP2_PRCM_CLKSSETUP_OFFSET 0x0094
#define OMAP2420_PRCM_CLKSSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0094)
#define OMAP2_PRCM_POLCTRL_OFFSET 0x0098
#define OMAP2420_PRCM_POLCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0098)
#define OMAP2430_PRCM_REVISION OMAP2430_PRM_REGADDR(OCP_MOD, 0x0000)
#define OMAP2430_PRCM_SYSCONFIG OMAP2430_PRM_REGADDR(OCP_MOD, 0x0010)
#define OMAP2430_PRCM_IRQSTATUS_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x0018)
#define OMAP2430_PRCM_IRQENABLE_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x001c)
#define OMAP2430_PRCM_VOLTCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0050)
#define OMAP2430_PRCM_VOLTST OMAP2430_PRM_REGADDR(OCP_MOD, 0x0054)
#define OMAP2430_PRCM_CLKSRC_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0060)
#define OMAP2430_PRCM_CLKOUT_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0070)
#define OMAP2430_PRCM_CLKEMUL_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0078)
#define OMAP2430_PRCM_CLKCFG_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0080)
#define OMAP2430_PRCM_CLKCFG_STATUS OMAP2430_PRM_REGADDR(OCP_MOD, 0x0084)
#define OMAP2430_PRCM_VOLTSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0090)
#define OMAP2430_PRCM_CLKSSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0094)
#define OMAP2430_PRCM_POLCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0098)
/*
* OMAP3-specific global PRM registers
* Use __raw_{read,write}l() with these registers.
*
* With a few exceptions, these are the register names beginning with
* PRM_* on 34xx. (The exceptions are the IRQSTATUS and IRQENABLE
* bits.)
*/
#define OMAP3_PRM_REVISION_OFFSET 0x0004
#define OMAP3430_PRM_REVISION OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0004)
#define OMAP3_PRM_SYSCONFIG_OFFSET 0x0014
#define OMAP3430_PRM_SYSCONFIG OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0014)
#define OMAP3_PRM_IRQSTATUS_MPU_OFFSET 0x0018
#define OMAP3430_PRM_IRQSTATUS_MPU OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0018)
#define OMAP3_PRM_IRQENABLE_MPU_OFFSET 0x001c
#define OMAP3430_PRM_IRQENABLE_MPU OMAP34XX_PRM_REGADDR(OCP_MOD, 0x001c)
#define OMAP3_PRM_VC_SMPS_SA_OFFSET 0x0020
#define OMAP3430_PRM_VC_SMPS_SA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0020)
#define OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET 0x0024
#define OMAP3430_PRM_VC_SMPS_VOL_RA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0024)
#define OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET 0x0028
#define OMAP3430_PRM_VC_SMPS_CMD_RA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0028)
#define OMAP3_PRM_VC_CMD_VAL_0_OFFSET 0x002c
#define OMAP3430_PRM_VC_CMD_VAL_0 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x002c)
#define OMAP3_PRM_VC_CMD_VAL_1_OFFSET 0x0030
#define OMAP3430_PRM_VC_CMD_VAL_1 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0030)
#define OMAP3_PRM_VC_CH_CONF_OFFSET 0x0034
#define OMAP3430_PRM_VC_CH_CONF OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0034)
#define OMAP3_PRM_VC_I2C_CFG_OFFSET 0x0038
#define OMAP3430_PRM_VC_I2C_CFG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0038)
#define OMAP3_PRM_VC_BYPASS_VAL_OFFSET 0x003c
#define OMAP3430_PRM_VC_BYPASS_VAL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x003c)
#define OMAP3_PRM_RSTCTRL_OFFSET 0x0050
#define OMAP3430_PRM_RSTCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0050)
#define OMAP3_PRM_RSTTIME_OFFSET 0x0054
#define OMAP3430_PRM_RSTTIME OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0054)
#define OMAP3_PRM_RSTST_OFFSET 0x0058
#define OMAP3430_PRM_RSTST OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0058)
#define OMAP3_PRM_VOLTCTRL_OFFSET 0x0060
#define OMAP3430_PRM_VOLTCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0060)
#define OMAP3_PRM_SRAM_PCHARGE_OFFSET 0x0064
#define OMAP3430_PRM_SRAM_PCHARGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0064)
#define OMAP3_PRM_CLKSRC_CTRL_OFFSET 0x0070
#define OMAP3430_PRM_CLKSRC_CTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0070)
#define OMAP3_PRM_VOLTSETUP1_OFFSET 0x0090
#define OMAP3430_PRM_VOLTSETUP1 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0090)
#define OMAP3_PRM_VOLTOFFSET_OFFSET 0x0094
#define OMAP3430_PRM_VOLTOFFSET OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0094)
#define OMAP3_PRM_CLKSETUP_OFFSET 0x0098
#define OMAP3430_PRM_CLKSETUP OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0098)
#define OMAP3_PRM_POLCTRL_OFFSET 0x009c
#define OMAP3430_PRM_POLCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x009c)
#define OMAP3_PRM_VOLTSETUP2_OFFSET 0x00a0
#define OMAP3430_PRM_VOLTSETUP2 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00a0)
#define OMAP3_PRM_VP1_CONFIG_OFFSET 0x00b0
#define OMAP3430_PRM_VP1_CONFIG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b0)
#define OMAP3_PRM_VP1_VSTEPMIN_OFFSET 0x00b4
#define OMAP3430_PRM_VP1_VSTEPMIN OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b4)
#define OMAP3_PRM_VP1_VSTEPMAX_OFFSET 0x00b8
#define OMAP3430_PRM_VP1_VSTEPMAX OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b8)
#define OMAP3_PRM_VP1_VLIMITTO_OFFSET 0x00bc
#define OMAP3430_PRM_VP1_VLIMITTO OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00bc)
#define OMAP3_PRM_VP1_VOLTAGE_OFFSET 0x00c0
#define OMAP3430_PRM_VP1_VOLTAGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c0)
#define OMAP3_PRM_VP1_STATUS_OFFSET 0x00c4
#define OMAP3430_PRM_VP1_STATUS OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c4)
#define OMAP3_PRM_VP2_CONFIG_OFFSET 0x00d0
#define OMAP3430_PRM_VP2_CONFIG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d0)
#define OMAP3_PRM_VP2_VSTEPMIN_OFFSET 0x00d4
#define OMAP3430_PRM_VP2_VSTEPMIN OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d4)
#define OMAP3_PRM_VP2_VSTEPMAX_OFFSET 0x00d8
#define OMAP3430_PRM_VP2_VSTEPMAX OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d8)
#define OMAP3_PRM_VP2_VLIMITTO_OFFSET 0x00dc
#define OMAP3430_PRM_VP2_VLIMITTO OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00dc)
#define OMAP3_PRM_VP2_VOLTAGE_OFFSET 0x00e0
#define OMAP3430_PRM_VP2_VOLTAGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e0)
#define OMAP3_PRM_VP2_STATUS_OFFSET 0x00e4
#define OMAP3430_PRM_VP2_STATUS OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e4)
#define OMAP3_PRM_CLKSEL_OFFSET 0x0040
#define OMAP3430_PRM_CLKSEL OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0040)
#define OMAP3_PRM_CLKOUT_CTRL_OFFSET 0x0070
#define OMAP3430_PRM_CLKOUT_CTRL OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
/*
* Module specific PRM register offsets from PRM_BASE + domain offset
*
* Use prm_{read,write}_mod_reg() with these registers.
*
* With a few exceptions, these are the register names beginning with
* {PM,RM}_* on both OMAP2/3 SoC families.. (The exceptions are the
* IRQSTATUS and IRQENABLE bits.)
*/
/* Register offsets appearing on both OMAP2 and OMAP3 */
#define OMAP2_RM_RSTCTRL 0x0050
#define OMAP2_RM_RSTTIME 0x0054
#define OMAP2_RM_RSTST 0x0058
#define OMAP2_PM_PWSTCTRL 0x00e0
#define OMAP2_PM_PWSTST 0x00e4
#define PM_WKEN 0x00a0
#define PM_WKEN1 PM_WKEN
#define PM_WKST 0x00b0
#define PM_WKST1 PM_WKST
#define PM_WKDEP 0x00c8
#define PM_EVGENCTRL 0x00d4
#define PM_EVGENONTIM 0x00d8
#define PM_EVGENOFFTIM 0x00dc
/* OMAP2xxx specific register offsets */
#define OMAP24XX_PM_WKEN2 0x00a4
#define OMAP24XX_PM_WKST2 0x00b4
#define OMAP24XX_PRCM_IRQSTATUS_DSP 0x00f0 /* IVA mod */
#define OMAP24XX_PRCM_IRQENABLE_DSP 0x00f4 /* IVA mod */
#define OMAP24XX_PRCM_IRQSTATUS_IVA 0x00f8
#define OMAP24XX_PRCM_IRQENABLE_IVA 0x00fc
/* OMAP3 specific register offsets */
#define OMAP3430ES2_PM_WKEN3 0x00f0
#define OMAP3430ES2_PM_WKST3 0x00b8
#define OMAP3430_PM_MPUGRPSEL 0x00a4
#define OMAP3430_PM_MPUGRPSEL1 OMAP3430_PM_MPUGRPSEL
#define OMAP3430ES2_PM_MPUGRPSEL3 0x00f8
#define OMAP3430_PM_IVAGRPSEL 0x00a8
#define OMAP3430_PM_IVAGRPSEL1 OMAP3430_PM_IVAGRPSEL
#define OMAP3430ES2_PM_IVAGRPSEL3 0x00f4
#define OMAP3430_PM_PREPWSTST 0x00e8
#define OMAP3430_PRM_IRQSTATUS_IVA2 0x00f8
#define OMAP3430_PRM_IRQENABLE_IVA2 0x00fc
#ifndef __ASSEMBLER__
/* Power/reset management domain register get/set */
extern u32 prm_read_mod_reg(s16 module, u16 idx);
extern void prm_write_mod_reg(u32 val, s16 module, u16 idx);
extern u32 prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
extern u32 prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx);
extern u32 prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx);
extern u32 prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask);
/* These omap2_ PRM functions apply to both OMAP2 and 3 */
extern int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift);
extern int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift);
extern int omap2_prm_deassert_hardreset(s16 prm_mod, u8 shift);
#endif
/*
* Bits common to specific registers
*
* The 3430 register and bit names are generally used,
* since they tend to make more sense
*/
/* PM_EVGENONTIM_MPU */
/* Named PM_EVEGENONTIM_MPU on the 24XX */
#define OMAP_ONTIMEVAL_SHIFT 0
#define OMAP_ONTIMEVAL_MASK (0xffffffff << 0)
/* PM_EVGENOFFTIM_MPU */
/* Named PM_EVEGENOFFTIM_MPU on the 24XX */
#define OMAP_OFFTIMEVAL_SHIFT 0
#define OMAP_OFFTIMEVAL_MASK (0xffffffff << 0)
/* PRM_CLKSETUP and PRCM_VOLTSETUP */
/* Named PRCM_CLKSSETUP on the 24XX */
#define OMAP_SETUP_TIME_SHIFT 0
#define OMAP_SETUP_TIME_MASK (0xffff << 0)
/* PRM_CLKSRC_CTRL */
/* Named PRCM_CLKSRC_CTRL on the 24XX */
#define OMAP_SYSCLKDIV_SHIFT 6
#define OMAP_SYSCLKDIV_MASK (0x3 << 6)
#define OMAP_AUTOEXTCLKMODE_SHIFT 3
#define OMAP_AUTOEXTCLKMODE_MASK (0x3 << 3)
#define OMAP_SYSCLKSEL_SHIFT 0
#define OMAP_SYSCLKSEL_MASK (0x3 << 0)
/* PM_EVGENCTRL_MPU */
#define OMAP_OFFLOADMODE_SHIFT 3
#define OMAP_OFFLOADMODE_MASK (0x3 << 3)
#define OMAP_ONLOADMODE_SHIFT 1
#define OMAP_ONLOADMODE_MASK (0x3 << 1)
#define OMAP_ENABLE_MASK (1 << 0)
/* PRM_RSTTIME */
/* Named RM_RSTTIME_WKUP on the 24xx */
#define OMAP_RSTTIME2_SHIFT 8
#define OMAP_RSTTIME2_MASK (0x1f << 8)
#define OMAP_RSTTIME1_SHIFT 0
#define OMAP_RSTTIME1_MASK (0xff << 0)
/* PRM_RSTCTRL */
/* Named RM_RSTCTRL_WKUP on the 24xx */
/* 2420 calls RST_DPLL3 'RST_DPLL' */
#define OMAP_RST_DPLL3_MASK (1 << 2)
#define OMAP_RST_GS_MASK (1 << 1)
/*
* Bits common to module-shared registers
*
* Not all registers of a particular type support all of these bits -
* check TRM if you are unsure
*/
/*
* 24XX: RM_RSTST_MPU and RM_RSTST_DSP - on 24XX, 'COREDOMAINWKUP_RST' is
* called 'COREWKUP_RST'
*
* 3430: RM_RSTST_IVA2, RM_RSTST_MPU, RM_RSTST_GFX, RM_RSTST_DSS,
* RM_RSTST_CAM, RM_RSTST_PER, RM_RSTST_NEON
*/
#define OMAP_COREDOMAINWKUP_RST_MASK (1 << 3)
/*
* 24XX: RM_RSTST_MPU, RM_RSTST_GFX, RM_RSTST_DSP
*
* 2430: RM_RSTST_MDM
*
* 3430: RM_RSTST_CORE, RM_RSTST_EMU
*/
#define OMAP_DOMAINWKUP_RST_MASK (1 << 2)
/*
* 24XX: RM_RSTST_MPU, RM_RSTST_WKUP, RM_RSTST_DSP
* On 24XX, 'GLOBALWARM_RST' is called 'GLOBALWMPU_RST'.
*
* 2430: RM_RSTST_MDM
*
* 3430: RM_RSTST_CORE, RM_RSTST_EMU
*/
#define OMAP_GLOBALWARM_RST_MASK (1 << 1)
#define OMAP_GLOBALCOLD_RST_MASK (1 << 0)
/*
* 24XX: PM_WKDEP_GFX, PM_WKDEP_MPU, PM_WKDEP_CORE, PM_WKDEP_DSP
* 2420 TRM sometimes uses "EN_WAKEUP" instead of "EN_WKUP"
*
* 2430: PM_WKDEP_MDM
*
* 3430: PM_WKDEP_IVA2, PM_WKDEP_GFX, PM_WKDEP_DSS, PM_WKDEP_CAM,
* PM_WKDEP_PER
*/
#define OMAP_EN_WKUP_SHIFT 4
#define OMAP_EN_WKUP_MASK (1 << 4)
/*
* 24XX: PM_PWSTCTRL_MPU, PM_PWSTCTRL_CORE, PM_PWSTCTRL_GFX,
* PM_PWSTCTRL_DSP
*
* 2430: PM_PWSTCTRL_MDM
*
* 3430: PM_PWSTCTRL_IVA2, PM_PWSTCTRL_CORE, PM_PWSTCTRL_GFX,
* PM_PWSTCTRL_DSS, PM_PWSTCTRL_CAM, PM_PWSTCTRL_PER,
* PM_PWSTCTRL_NEON
*/
#define OMAP_LOGICRETSTATE_MASK (1 << 2)
/*
* MAX_MODULE_HARDRESET_WAIT: Maximum microseconds to wait for an OMAP
* submodule to exit hardreset
*/
#define MAX_MODULE_HARDRESET_WAIT 10000
#endif
......@@ -26,6 +26,7 @@
#define __ARCH_ARM_MACH_OMAP2_PRM44XX_H
#include "prcm-common.h"
#include "prm.h"
#define OMAP4430_PRM_BASE 0x4a306000
......
......@@ -27,8 +27,6 @@
#include <plat/clock.h>
#include <plat/sram.h>
#include "prm.h"
#include <plat/sdrc.h>
#include "sdrc.h"
......
......@@ -28,7 +28,7 @@
#include <plat/clock.h>
#include <plat/sram.h>
#include "prm.h"
#include "prm2xxx_3xxx.h"
#include "clock.h"
#include <plat/sdrc.h>
#include "sdrc.h"
......
......@@ -40,9 +40,9 @@
#include <plat/omap_hwmod.h>
#include <plat/omap_device.h>
#include "prm.h"
#include "prm2xxx_3xxx.h"
#include "pm.h"
#include "cm.h"
#include "cm2xxx_3xxx.h"
#include "prm-regbits-34xx.h"
#include "control.h"
......
......@@ -27,8 +27,8 @@
#include <plat/sram.h>
#include <mach/io.h>
#include "cm.h"
#include "prm.h"
#include "cm2xxx_3xxx.h"
#include "prm2xxx_3xxx.h"
#include "sdrc.h"
#include "control.h"
......
......@@ -27,8 +27,8 @@
#include <mach/io.h>
#include <mach/hardware.h>
#include "prm.h"
#include "cm.h"
#include "prm2xxx_3xxx.h"
#include "cm2xxx_3xxx.h"
#include "sdrc.h"
.text
......
......@@ -27,8 +27,8 @@
#include <mach/io.h>
#include <mach/hardware.h>
#include "prm.h"
#include "cm.h"
#include "prm2xxx_3xxx.h"
#include "cm2xxx_3xxx.h"
#include "sdrc.h"
.text
......
......@@ -32,7 +32,7 @@
#include <mach/io.h>
#include "sdrc.h"
#include "cm.h"
#include "cm2xxx_3xxx.h"
.text
......
......@@ -27,6 +27,8 @@
#ifndef __ARCH_ARM_MACH_OMAP_COMMON_H
#define __ARCH_ARM_MACH_OMAP_COMMON_H
#include <linux/delay.h>
#include <plat/i2c.h>
struct sys_timer;
......
......@@ -34,15 +34,8 @@ int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, u8 idlest,
void omap3_prcm_save_context(void);
void omap3_prcm_restore_context(void);
u32 prm_read_mod_reg(s16 module, u16 idx);
void prm_write_mod_reg(u32 val, s16 module, u16 idx);
u32 prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
u32 prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask);
u32 omap4_prm_read_bits_shift(void __iomem *reg, u32 mask);
u32 omap4_prm_rmw_reg_bits(u32 mask, u32 bits, void __iomem *reg);
u32 cm_read_mod_reg(s16 module, u16 idx);
void cm_write_mod_reg(u32 val, s16 module, u16 idx);
u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
#endif
......
......@@ -28,6 +28,8 @@
#include <plat/dma.h>
#include <plat/mcbsp.h>
/* XXX These "sideways" includes are a sign that something is wrong */
#include "../mach-omap2/cm2xxx_3xxx.h"
#include "../mach-omap2/cm-regbits-34xx.h"
struct omap_mcbsp **mcbsp_ptr;
......
......@@ -33,9 +33,10 @@
#include "sram.h"
#include "fb.h"
/* XXX These "sideways" includes are a sign that something is wrong */
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
# include "../mach-omap2/prm.h"
# include "../mach-omap2/cm.h"
# include "../mach-omap2/prm2xxx_3xxx.h"
# include "../mach-omap2/sdrc.h"
#endif
......
......@@ -21,6 +21,12 @@
#include <plat/powerdomain.h>
#include <plat/clockdomain.h>
/*
* XXX These mach-omap2/ includes are wrong and should be removed. No
* driver should read or write to PRM/CM registers directly; they
* should rely on OMAP core code to do this.
*/
#include <mach-omap2/cm2xxx_3xxx.h>
#include <mach-omap2/prm-regbits-34xx.h>
#include <mach-omap2/cm-regbits-34xx.h>
#include <dspbridge/devdefs.h>
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册