[PATCH] fix reboot via keyboard controller reset

I have a system (Biostar IDEQ210M mini-pc with a VIA chipset) which will
not reboot unless a keyboard is plugged in to it.  I have tried all
combinations of the kernel "reboot=x,y" flags to no avail.  Rebooting by
any method will leave the system in a wedged state (at the "Restarting
system" message).

I finally tracked the problem down to the machine's refusal to fully reboot
unless the keyboard controller status register had bit 2 set.  This is the
"System flag" which when set, indicates successful completion of the
keyboard controller self-test (Basic Assurance Test, BAT).

I suppose that something is trying to protect against sporadic reboots
unless the keyboard controller is in a good state (a keyboard is present),
but I need this machine to be headless.

I found that setting the system flag (via the command byte) before giving
the "pulse reset line" command will allow the reboot to proceed.  The patch
is simple, and I think it should be fine for everybody whether they have
this type of machine or not.  This affects the "hard" reboot (as done when
the kernel boot flags "reboot=c,h" are used).
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

include/asm-i386/mach-default/mach_reboot.h

@@ -22,7 +22,15 @@ static inline void mach_reboot(void)
 	for (i = 0; i < 100; i++) {
 		kb_wait();
 		udelay(50);
-		outb(0xfe, 0x64);         /* pulse reset low */
+		outb(0x60, 0x64);	/* write Controller Command Byte */
+		udelay(50);
+		kb_wait();
+		udelay(50);
+		outb(0x14, 0x60);	/* set "System flag" */
+		udelay(50);
+		kb_wait();
+		udelay(50);
+		outb(0xfe, 0x64);	/* pulse reset low */
 		udelay(50);
 	}
 }