提交 59f14800 编写于 作者: B Brent Casavant 提交者: Linus Torvalds

[PATCH] ioc4: Enable build on non-SN2

The SGI PCI-RT card, based on the SGI IOC4 chip, will be made available on
Altix XE (x86_64) platforms in the near future.  As such it is now a
misnomer for the IOC4 base device driver to live under drivers/sn, and
would complicate builds for non-SN2.

This patch moves the IOC4 base driver code from drivers/sn to drivers/misc,
and updates the associated Makefiles and Kconfig files to allow building on
non-SN2 configs.  Due to the resulting change in link order, it is now
necessary to use late_initcall() for IOC4 subdriver initialization.

[akpm@osdl.org: __udivdi3 fix]
[akpm@osdl.org: fix default in Kconfig]
Acked-by: NPat Gefre <pfg@sgi.com>
Acked-by: NJeremy Higdon <jeremy@sgi.com>
Signed-off-by: NBrent Casavant <bcasavan@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
上级 107d5a72
...@@ -14,6 +14,10 @@ source "drivers/pnp/Kconfig" ...@@ -14,6 +14,10 @@ source "drivers/pnp/Kconfig"
source "drivers/block/Kconfig" source "drivers/block/Kconfig"
# misc before ide - BLK_DEV_SGIIOC4 depends on SGI_IOC4
source "drivers/misc/Kconfig"
source "drivers/ide/Kconfig" source "drivers/ide/Kconfig"
source "drivers/scsi/Kconfig" source "drivers/scsi/Kconfig"
...@@ -52,8 +56,6 @@ source "drivers/w1/Kconfig" ...@@ -52,8 +56,6 @@ source "drivers/w1/Kconfig"
source "drivers/hwmon/Kconfig" source "drivers/hwmon/Kconfig"
source "drivers/misc/Kconfig"
source "drivers/mfd/Kconfig" source "drivers/mfd/Kconfig"
source "drivers/media/Kconfig" source "drivers/media/Kconfig"
......
...@@ -774,7 +774,7 @@ ioc4_ide_exit(void) ...@@ -774,7 +774,7 @@ ioc4_ide_exit(void)
ioc4_unregister_submodule(&ioc4_ide_submodule); ioc4_unregister_submodule(&ioc4_ide_submodule);
} }
module_init(ioc4_ide_init); late_initcall(ioc4_ide_init); /* Call only after IDE init is done */
module_exit(ioc4_ide_exit); module_exit(ioc4_ide_exit);
MODULE_AUTHOR("Aniket Malatpure/Jeremy Higdon"); MODULE_AUTHOR("Aniket Malatpure/Jeremy Higdon");
......
...@@ -28,6 +28,17 @@ config IBM_ASM ...@@ -28,6 +28,17 @@ config IBM_ASM
If unsure, say N. If unsure, say N.
config SGI_IOC4
tristate "SGI IOC4 Base IO support"
---help---
This option enables basic support for the IOC4 chip on certain
SGI IO controller cards (IO9, IO10, and PCI-RT). This option
does not enable any specific functions on such a card, but provides
necessary infrastructure for other drivers to utilize.
If you have an SGI Altix with an IOC4-based card say Y.
Otherwise say N.
config TIFM_CORE config TIFM_CORE
tristate "TI Flash Media interface support (EXPERIMENTAL)" tristate "TI Flash Media interface support (EXPERIMENTAL)"
depends on EXPERIMENTAL depends on EXPERIMENTAL
......
...@@ -9,3 +9,4 @@ obj-$(CONFIG_MSI_LAPTOP) += msi-laptop.o ...@@ -9,3 +9,4 @@ obj-$(CONFIG_MSI_LAPTOP) += msi-laptop.o
obj-$(CONFIG_LKDTM) += lkdtm.o obj-$(CONFIG_LKDTM) += lkdtm.o
obj-$(CONFIG_TIFM_CORE) += tifm_core.o obj-$(CONFIG_TIFM_CORE) += tifm_core.o
obj-$(CONFIG_TIFM_7XX1) += tifm_7xx1.o obj-$(CONFIG_TIFM_7XX1) += tifm_7xx1.o
obj-$(CONFIG_SGI_IOC4) += ioc4.o
...@@ -32,9 +32,6 @@ ...@@ -32,9 +32,6 @@
#include <linux/ktime.h> #include <linux/ktime.h>
#include <linux/mutex.h> #include <linux/mutex.h>
#include <linux/time.h> #include <linux/time.h>
#include <asm/sn/addrs.h>
#include <asm/sn/clksupport.h>
#include <asm/sn/shub_mmr.h>
/*************** /***************
* Definitions * * Definitions *
...@@ -208,10 +205,12 @@ ioc4_clock_calibrate(struct ioc4_driver_data *idd) ...@@ -208,10 +205,12 @@ ioc4_clock_calibrate(struct ioc4_driver_data *idd)
IOC4_CALIBRATE_DEFAULT / IOC4_EXTINT_COUNT_DIVISOR); IOC4_CALIBRATE_DEFAULT / IOC4_EXTINT_COUNT_DIVISOR);
period = IOC4_CALIBRATE_DEFAULT; period = IOC4_CALIBRATE_DEFAULT;
} else { } else {
u64 ns = period;
do_div(ns, IOC4_EXTINT_COUNT_DIVISOR);
printk(KERN_DEBUG printk(KERN_DEBUG
"IOC4 %s: PCI clock is %ld ns.\n", "IOC4 %s: PCI clock is %lld ns.\n",
pci_name(idd->idd_pdev), pci_name(idd->idd_pdev), ns);
period / IOC4_EXTINT_COUNT_DIVISOR);
} }
/* Remember results. We store the extint clock period rather /* Remember results. We store the extint clock period rather
......
...@@ -2935,7 +2935,7 @@ static void __devexit ioc4_serial_exit(void) ...@@ -2935,7 +2935,7 @@ static void __devexit ioc4_serial_exit(void)
uart_unregister_driver(&ioc4_uart_rs422); uart_unregister_driver(&ioc4_uart_rs422);
} }
module_init(ioc4_serial_init); late_initcall(ioc4_serial_init); /* Call only after tty init is done */
module_exit(ioc4_serial_exit); module_exit(ioc4_serial_exit);
MODULE_AUTHOR("Pat Gefre - Silicon Graphics Inc. (SGI) <pfg@sgi.com>"); MODULE_AUTHOR("Pat Gefre - Silicon Graphics Inc. (SGI) <pfg@sgi.com>");
......
...@@ -5,18 +5,6 @@ ...@@ -5,18 +5,6 @@
menu "SN Devices" menu "SN Devices"
depends on SGI_SN depends on SGI_SN
config SGI_IOC4
tristate "SGI IOC4 Base IO support"
default m
---help---
This option enables basic support for the IOC4 chip on certain
SGI IO controller cards (IO9, IO10, and PCI-RT). This option
does not enable any specific functions on such a card, but provides
necessary infrastructure for other drivers to utilize.
If you have an SGI Altix with an IOC4-based card say Y.
Otherwise say N.
config SGI_IOC3 config SGI_IOC3
tristate "SGI IOC3 Base IO support" tristate "SGI IOC3 Base IO support"
default m default m
......
...@@ -3,5 +3,4 @@ ...@@ -3,5 +3,4 @@
# #
# #
obj-$(CONFIG_SGI_IOC4) += ioc4.o
obj-$(CONFIG_SGI_IOC3) += ioc3.o obj-$(CONFIG_SGI_IOC3) += ioc3.o
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册