提交 59e5e36f 编写于 作者: Q Qiuxu Zhuo 提交者: Caspar Zhang

ICX: EDAC, skx, i10nm: Make skx_common.c a pure library

commit fe783516e3016652b74ac92fb8b3fc2b1c0e9d5b upstream.

The following Kconfig constellations fail randconfig builds:

  CONFIG_ACPI_NFIT=y
  CONFIG_EDAC_DEBUG=y
  CONFIG_EDAC_SKX=m
  CONFIG_EDAC_I10NM=y

or

  CONFIG_ACPI_NFIT=y
  CONFIG_EDAC_DEBUG=y
  CONFIG_EDAC_SKX=y
  CONFIG_EDAC_I10NM=m

with:
  ...
  CC [M]  drivers/edac/skx_common.o
  ...
  .../skx_common.o:.../skx_common.c:672: undefined reference to `__this_module'

That is because if one of the two drivers - skx_edac or i10nm_edac - is
built-in and the other one is a module, the shared file skx_common.c
gets linked into a module object by kbuild. Therefore, when linking that
same file into vmlinux, the '__this_module' symbol used in debugfs isn't
defined, leading to the above error.

Fix it by moving all debugfs code from skx_common.c to both skx_base.c
and i10nm_base.c respectively. Thus, skx_common.c doesn't refer to the
'__this_module' symbol anymore.

Clarify skx_common.c's purpose at the top of the file for future
reference, while at it.

 [ bp: Make text more readable. ]

Fixes: d4dc89d069aa ("EDAC, i10nm: Add a driver for Intel 10nm server processors")
Reported-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NQiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: James Morse <james.morse@arm.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: https://lkml.kernel.org/r/20190321221339.GA32323@agluck-deskSigned-off-by: NYouquan Song <youquan.song@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>
上级 a9bae25f
......@@ -181,6 +181,54 @@ static struct notifier_block i10nm_mce_dec = {
.priority = MCE_PRIO_EDAC,
};
#ifdef CONFIG_EDAC_DEBUG
/*
* Debug feature.
* Exercise the address decode logic by writing an address to
* /sys/kernel/debug/edac/i10nm_test/addr.
*/
static struct dentry *i10nm_test;
static int debugfs_u64_set(void *data, u64 val)
{
struct mce m;
pr_warn_once("Fake error to 0x%llx injected via debugfs\n", val);
memset(&m, 0, sizeof(m));
/* ADDRV + MemRd + Unknown channel */
m.status = MCI_STATUS_ADDRV + 0x90;
/* One corrected error */
m.status |= BIT_ULL(38);
m.addr = val;
skx_mce_check_error(NULL, 0, &m);
return 0;
}
DEFINE_SIMPLE_ATTRIBUTE(fops_u64_wo, NULL, debugfs_u64_set, "%llu\n");
static void setup_i10nm_debug(void)
{
i10nm_test = edac_debugfs_create_dir("i10nm_test");
if (!i10nm_test)
return;
if (!edac_debugfs_create_file("addr", 0200, i10nm_test,
NULL, &fops_u64_wo)) {
debugfs_remove(i10nm_test);
i10nm_test = NULL;
}
}
static void teardown_i10nm_debug(void)
{
debugfs_remove_recursive(i10nm_test);
}
#else
static inline void setup_i10nm_debug(void) {}
static inline void teardown_i10nm_debug(void) {}
#endif /*CONFIG_EDAC_DEBUG*/
static int __init i10nm_init(void)
{
u8 mc = 0, src_id = 0, node_id = 0;
......@@ -249,7 +297,7 @@ static int __init i10nm_init(void)
opstate_init();
mce_register_decode_chain(&i10nm_mce_dec);
setup_skx_debug("i10nm_test");
setup_i10nm_debug();
i10nm_printk(KERN_INFO, "%s\n", I10NM_REVISION);
......@@ -262,7 +310,7 @@ static int __init i10nm_init(void)
static void __exit i10nm_exit(void)
{
edac_dbg(2, "\n");
teardown_skx_debug();
teardown_i10nm_debug();
mce_unregister_decode_chain(&i10nm_mce_dec);
skx_adxl_put();
skx_remove();
......
......@@ -540,6 +540,54 @@ static struct notifier_block skx_mce_dec = {
.priority = MCE_PRIO_EDAC,
};
#ifdef CONFIG_EDAC_DEBUG
/*
* Debug feature.
* Exercise the address decode logic by writing an address to
* /sys/kernel/debug/edac/skx_test/addr.
*/
static struct dentry *skx_test;
static int debugfs_u64_set(void *data, u64 val)
{
struct mce m;
pr_warn_once("Fake error to 0x%llx injected via debugfs\n", val);
memset(&m, 0, sizeof(m));
/* ADDRV + MemRd + Unknown channel */
m.status = MCI_STATUS_ADDRV + 0x90;
/* One corrected error */
m.status |= BIT_ULL(38);
m.addr = val;
skx_mce_check_error(NULL, 0, &m);
return 0;
}
DEFINE_SIMPLE_ATTRIBUTE(fops_u64_wo, NULL, debugfs_u64_set, "%llu\n");
static void setup_skx_debug(void)
{
skx_test = edac_debugfs_create_dir("skx_test");
if (!skx_test)
return;
if (!edac_debugfs_create_file("addr", 0200, skx_test,
NULL, &fops_u64_wo)) {
debugfs_remove(skx_test);
skx_test = NULL;
}
}
static void teardown_skx_debug(void)
{
debugfs_remove_recursive(skx_test);
}
#else
static inline void setup_skx_debug(void) {}
static inline void teardown_skx_debug(void) {}
#endif /*CONFIG_EDAC_DEBUG*/
/*
* skx_init:
* make sure we are running on the correct cpu model
......@@ -619,7 +667,7 @@ static int __init skx_init(void)
/* Ensure that the OPSTATE is set correctly for POLL or NMI */
opstate_init();
setup_skx_debug("skx_test");
setup_skx_debug();
mce_register_decode_chain(&skx_mce_dec);
......
// SPDX-License-Identifier: GPL-2.0
/*
* Common codes for both the skx_edac driver and Intel 10nm server EDAC driver.
* Originally split out from the skx_edac driver.
*
* Shared code by both skx_edac and i10nm_edac. Originally split out
* from the skx_edac driver.
*
* This file is linked into both skx_edac and i10nm_edac drivers. In
* order to avoid link errors, this file must be like a pure library
* without including symbols and defines which would otherwise conflict,
* when linked once into a module and into a built-in object, at the
* same time. For example, __this_module symbol references when that
* file is being linked into a built-in object.
*
* Copyright (c) 2018, Intel Corporation.
*/
......@@ -644,48 +652,3 @@ void skx_remove(void)
kfree(d);
}
}
#ifdef CONFIG_EDAC_DEBUG
/*
* Debug feature.
* Exercise the address decode logic by writing an address to
* /sys/kernel/debug/edac/dirname/addr.
*/
static struct dentry *skx_test;
static int debugfs_u64_set(void *data, u64 val)
{
struct mce m;
pr_warn_once("Fake error to 0x%llx injected via debugfs\n", val);
memset(&m, 0, sizeof(m));
/* ADDRV + MemRd + Unknown channel */
m.status = MCI_STATUS_ADDRV + 0x90;
/* One corrected error */
m.status |= BIT_ULL(38);
m.addr = val;
skx_mce_check_error(NULL, 0, &m);
return 0;
}
DEFINE_SIMPLE_ATTRIBUTE(fops_u64_wo, NULL, debugfs_u64_set, "%llu\n");
void setup_skx_debug(const char *dirname)
{
skx_test = edac_debugfs_create_dir(dirname);
if (!skx_test)
return;
if (!edac_debugfs_create_file("addr", 0200, skx_test,
NULL, &fops_u64_wo)) {
debugfs_remove(skx_test);
skx_test = NULL;
}
}
void teardown_skx_debug(void)
{
debugfs_remove_recursive(skx_test);
}
#endif /*CONFIG_EDAC_DEBUG*/
......@@ -141,12 +141,4 @@ int skx_mce_check_error(struct notifier_block *nb, unsigned long val,
void skx_remove(void);
#ifdef CONFIG_EDAC_DEBUG
void setup_skx_debug(const char *dirname);
void teardown_skx_debug(void);
#else
static inline void setup_skx_debug(const char *dirname) {}
static inline void teardown_skx_debug(void) {}
#endif /*CONFIG_EDAC_DEBUG*/
#endif /* _SKX_COMM_EDAC_H */
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册