[SERIAL] uart_port flags member should use UPF_*

Convert usage of ASYNC_* to UPF_*.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

arch/mips/cobalt/setup.c

@@ -139,7 +139,7 @@ void __init plat_setup(void)
 		uart.type	= PORT_UNKNOWN;
 		uart.uartclk	= 18432000;
 		uart.irq	= COBALT_SERIAL_IRQ;
-		uart.flags	= STD_COM_FLAGS;
+		uart.flags	= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
 		uart.iobase	= 0xc800000;
 		uart.iotype	= UPIO_PORT;
 

arch/mips/lasat/setup.c

@@ -134,7 +134,7 @@ void __init serial_init(void)
 
 	memset(&s, 0, sizeof(s));
 
-	s.flags = STD_COM_FLAGS;
+	s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
 	s.iotype = UPIO_MEM;
 
 	if (mips_machtype == MACH_LASAT_100) {

arch/mips/mips-boards/atlas/atlas_setup.c

@@ -82,7 +82,7 @@ static void __init serial_init(void)
 #endif
 	s.irq = ATLASINT_UART;
 	s.uartclk = ATLAS_BASE_BAUD * 16;
-	s.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
+	s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ;
 	s.iotype = UPIO_PORT;
 	s.regshift = 3;
 

arch/mips/mips-boards/sead/sead_setup.c

@@ -71,7 +71,7 @@ static void __init serial_init(void)
 #endif
 	s.irq = MIPSCPU_INT_BASE + MIPSCPU_INT_UART0;
 	s.uartclk = SEAD_BASE_BAUD * 16;
-	s.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
+	s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ;
 	s.iotype = UPIO_PORT;
 	s.regshift = 3;
 

arch/mips/mips-boards/sim/sim_setup.c

@@ -88,7 +88,7 @@ static void __init serial_init(void)
 	 but poll for now */
 	s.irq =  0;
 	s.uartclk = BASE_BAUD * 16;
-	s.flags = ASYNC_BOOT_AUTOCONF | UPF_SKIP_TEST;
+	s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
 	s.iotype = UPIO_PORT;
 	s.regshift = 0;
 	s.timeout = 4;

arch/mips/momentum/jaguar_atx/ja-console.c

@@ -93,7 +93,7 @@ static void inline ja_console_probe(void)
 	up.uartclk	= JAGUAR_ATX_UART_CLK;
 	up.regshift	= 2;
 	up.iotype	= UPIO_MEM;
-	up.flags	= ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+	up.flags	= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
 	up.line		= 0;
 
 	if (early_serial_setup(&up))

arch/mips/philips/pnx8550/common/platform.c

@@ -73,7 +73,7 @@ struct ip3106_port ip3106_ports[] = {
 			.uartclk	= 3692300,
 			.fifosize	= 16,
 			.ops		= &ip3106_pops,
-			.flags		= ASYNC_BOOT_AUTOCONF,
+			.flags		= UPF_BOOT_AUTOCONF,
 			.line		= 0,
 		},
 	},
@@ -87,7 +87,7 @@ struct ip3106_port ip3106_ports[] = {
 			.uartclk	= 3692300,
 			.fifosize	= 16,
 			.ops		= &ip3106_pops,
-			.flags		= ASYNC_BOOT_AUTOCONF,
+			.flags		= UPF_BOOT_AUTOCONF,
 			.line		= 1,
 		},
 	},

arch/mips/pmc-sierra/yosemite/setup.c

@@ -185,7 +185,7 @@ static void __init py_uart_setup(void)
 	up.uartclk      = TITAN_UART_CLK;
 	up.regshift     = 0;
 	up.iotype       = UPIO_MEM;
-	up.flags        = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+	up.flags        = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
 	up.line         = 0;
 
 	if (early_serial_setup(&up))

arch/mips/sgi-ip32/ip32-setup.c

@@ -66,11 +66,6 @@ static inline void str2eaddr(unsigned char *ea, unsigned char *str)
 #include <linux/tty.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>
-extern int early_serial_setup(struct uart_port *port);
-
-#define STD_COM_FLAGS (ASYNC_SKIP_TEST)
-#define BASE_BAUD (1843200 / 16)
-
 #endif /* CONFIG_SERIAL_8250 */
 
 /* An arbitrary time; this can be decreased if reliability looks good */
@@ -110,8 +105,8 @@ void __init plat_setup(void)
 		o2_serial[0].type	= PORT_16550A;
 		o2_serial[0].line	= 0;
 		o2_serial[0].irq	= MACEISA_SERIAL1_IRQ;
-		o2_serial[0].flags	= STD_COM_FLAGS;
-		o2_serial[0].uartclk	= BASE_BAUD * 16;
+		o2_serial[0].flags	= UPF_SKIP_TEST;
+		o2_serial[0].uartclk	= 1843200;
 		o2_serial[0].iotype	= UPIO_MEM;
 		o2_serial[0].membase	= (char *)&mace->isa.serial1;
 		o2_serial[0].fifosize	= 14;
@@ -121,8 +116,8 @@ void __init plat_setup(void)
 		o2_serial[1].type	= PORT_16550A;
 		o2_serial[1].line	= 1;
 		o2_serial[1].irq	= MACEISA_SERIAL2_IRQ;
-		o2_serial[1].flags	= STD_COM_FLAGS;
-		o2_serial[1].uartclk	= BASE_BAUD * 16;
+		o2_serial[1].flags	= UPF_SKIP_TEST;
+		o2_serial[1].uartclk	= 1843200;
 		o2_serial[1].iotype	= UPIO_MEM;
 		o2_serial[1].membase	= (char *)&mace->isa.serial2;
 		o2_serial[1].fifosize	= 14;

arch/ppc/platforms/4xx/bamboo.c

@@ -333,7 +333,7 @@ bamboo_early_serial_map(void)
 	port.uartclk = clocks.uart0;
 	port.regshift = 0;
 	port.iotype = UPIO_MEM;
-	port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+	port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
 	port.line = 0;
 
 	if (early_serial_setup(&port) != 0) {

arch/ppc/platforms/4xx/bubinga.c

@@ -98,7 +98,7 @@ bubinga_early_serial_map(void)
 	port.uartclk = uart_clock;
 	port.regshift = 0;
 	port.iotype = UPIO_MEM;
-	port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+	port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
 	port.line = 0;
 
 	if (early_serial_setup(&port) != 0) {

arch/ppc/platforms/4xx/ebony.c

@@ -226,7 +226,7 @@ ebony_early_serial_map(void)
 	port.uartclk = clocks.uart0;
 	port.regshift = 0;
 	port.iotype = UPIO_MEM;
-	port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+	port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
 	port.line = 0;
 
 	if (early_serial_setup(&port) != 0) {

arch/ppc/platforms/4xx/luan.c

@@ -280,7 +280,7 @@ luan_early_serial_map(void)
 	port.uartclk = clocks.uart0;
 	port.regshift = 0;
 	port.iotype = UPIO_MEM;
-	port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+	port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
 	port.line = 0;
 
 	if (early_serial_setup(&port) != 0) {

arch/ppc/platforms/4xx/ocotea.c

@@ -249,7 +249,7 @@ ocotea_early_serial_map(void)
 	port.uartclk = clocks.uart0;
 	port.regshift = 0;
 	port.iotype = UPIO_MEM;
-	port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+	port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
 	port.line = 0;
 
 	if (early_serial_setup(&port) != 0) {

arch/ppc/platforms/4xx/xilinx_ml300.c

@@ -96,7 +96,7 @@ ml300_early_serial_map(void)
 		port.uartclk = old_ports[i].baud_base * 16;
 		port.regshift = old_ports[i].iomem_reg_shift;
 		port.iotype = UPIO_MEM;
-		port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+		port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
 		port.line = i;
 
 		if (early_serial_setup(&port) != 0) {

arch/ppc/platforms/4xx/yucca.c

@@ -306,7 +306,7 @@ yucca_early_serial_map(void)
 	port.uartclk = clocks.uart0;
 	port.regshift = 0;
 	port.iotype = UPIO_MEM;
-	port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+	port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
 	port.line = 0;
 
 	if (early_serial_setup(&port) != 0) {

arch/ppc/platforms/spruce.c

@@ -176,7 +176,7 @@ spruce_early_serial_map(void)
 	memset(&serial_req, 0, sizeof(serial_req));
 	serial_req.uartclk = uart_clk;
 	serial_req.irq = UART0_INT;
-	serial_req.flags = ASYNC_BOOT_AUTOCONF;
+	serial_req.flags = UPF_BOOT_AUTOCONF;
 	serial_req.iotype = UPIO_MEM;
 	serial_req.membase = (u_char *)UART0_IO_BASE;
 	serial_req.regshift = 0;

drivers/serial/m32r_sio.c

@@ -80,7 +80,7 @@
 #include <asm/serial.h>
 
 /* Standard COM flags */
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST)
 
 /*
  * SERIAL_PORT_DFNS tells us about built-in ports that have no

drivers/serial/sh-sci.c

@@ -1471,7 +1471,7 @@ static struct sci_port sci_ports[] = {
 			.iotype		= UPIO_MEM,
 			.irq		= 61,
 			.ops		= &sci_uart_ops,
-			.flags		= ASYNC_BOOT_AUTOCONF,
+			.flags		= UPF_BOOT_AUTOCONF,
 			.line		= 0,
 		},
 		.type		= PORT_SCIF,
@@ -1485,7 +1485,7 @@ static struct sci_port sci_ports[] = {
 			.iotype		= UPIO_MEM,
 			.irq		= 62,
 			.ops		= &sci_uart_ops,
-			.flags		= ASYNC_BOOT_AUTOCONF,
+			.flags		= UPF_BOOT_AUTOCONF,
 			.line		= 1,
 		},
 		.type		= PORT_SCIF,
@@ -1499,7 +1499,7 @@ static struct sci_port sci_ports[] = {
 			.iotype		= UPIO_MEM,
 			.irq		= 63,
 			.ops		= &sci_uart_ops,
-			.flags		= ASYNC_BOOT_AUTOCONF,
+			.flags		= UPF_BOOT_AUTOCONF,
 			.line		= 2,
 		},
 		.type		= PORT_SCIF,
@@ -1514,7 +1514,7 @@ static struct sci_port sci_ports[] = {
 			.iotype		= UPIO_MEM,
 			.irq		= 43,
 			.ops		= &sci_uart_ops,
-			.flags		= ASYNC_BOOT_AUTOCONF,
+			.flags		= UPF_BOOT_AUTOCONF,
 			.line		= 0,
 		},
 		.type		= PORT_SCIF,
@@ -1528,7 +1528,7 @@ static struct sci_port sci_ports[] = {
 			.iotype		= UPIO_MEM,
 			.irq		= 79,
 			.ops		= &sci_uart_ops,
-			.flags		= ASYNC_BOOT_AUTOCONF,
+			.flags		= UPF_BOOT_AUTOCONF,
 			.line		= 1,
 		},
 		.type		= PORT_SCIF,