提交 589876e2 编写于 作者: T Takashi Iwai

ALSA: hda/realtek - Apply probe-fixup really after probing

Move the call of alc_apply_fixup() with ALC_FIXUP_ACT_PROBE after the
whole setups of patch_ops & co, so that the fix-up function may override
the default setup.  This will be needed for installing the own unsol
event handler (e.g. for volume-knob controls).
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
上级 b9368f5c
......@@ -4566,8 +4566,6 @@ static int patch_alc880(struct hda_codec *codec)
set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT);
}
alc_apply_fixup(codec, ALC_FIXUP_ACT_PROBE);
codec->patch_ops = alc_patch_ops;
if (board_config == ALC_MODEL_AUTO)
spec->init_hook = alc_auto_init_std;
......@@ -4578,6 +4576,8 @@ static int patch_alc880(struct hda_codec *codec)
spec->loopback.amplist = alc880_loopbacks;
#endif
alc_apply_fixup(codec, ALC_FIXUP_ACT_PROBE);
return 0;
error:
......@@ -4749,8 +4749,6 @@ static int patch_alc260(struct hda_codec *codec)
set_beep_amp(spec, 0x07, 0x05, HDA_INPUT);
}
alc_apply_fixup(codec, ALC_FIXUP_ACT_PROBE);
codec->patch_ops = alc_patch_ops;
spec->init_hook = alc_auto_init_std;
spec->shutup = alc_eapd_shutup;
......@@ -4759,6 +4757,8 @@ static int patch_alc260(struct hda_codec *codec)
spec->loopback.amplist = alc260_loopbacks;
#endif
alc_apply_fixup(codec, ALC_FIXUP_ACT_PROBE);
return 0;
error:
......@@ -5165,8 +5165,6 @@ static int patch_alc882(struct hda_codec *codec)
set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT);
}
alc_apply_fixup(codec, ALC_FIXUP_ACT_PROBE);
codec->patch_ops = alc_patch_ops;
if (board_config == ALC_MODEL_AUTO)
spec->init_hook = alc_auto_init_std;
......@@ -5178,6 +5176,8 @@ static int patch_alc882(struct hda_codec *codec)
spec->loopback.amplist = alc882_loopbacks;
#endif
alc_apply_fixup(codec, ALC_FIXUP_ACT_PROBE);
return 0;
error:
......@@ -5331,8 +5331,6 @@ static int patch_alc262(struct hda_codec *codec)
set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT);
}
alc_apply_fixup(codec, ALC_FIXUP_ACT_PROBE);
codec->patch_ops = alc_patch_ops;
spec->init_hook = alc_auto_init_std;
spec->shutup = alc_eapd_shutup;
......@@ -5342,6 +5340,8 @@ static int patch_alc262(struct hda_codec *codec)
spec->loopback.amplist = alc262_loopbacks;
#endif
alc_apply_fixup(codec, ALC_FIXUP_ACT_PROBE);
return 0;
error:
......@@ -5992,8 +5992,6 @@ static int patch_alc269(struct hda_codec *codec)
set_beep_amp(spec, 0x0b, 0x04, HDA_INPUT);
}
alc_apply_fixup(codec, ALC_FIXUP_ACT_PROBE);
codec->patch_ops = alc_patch_ops;
#ifdef CONFIG_PM
codec->patch_ops.resume = alc269_resume;
......@@ -6008,6 +6006,8 @@ static int patch_alc269(struct hda_codec *codec)
codec->patch_ops.check_power_status = alc269_mic2_mute_check_ps;
#endif
alc_apply_fixup(codec, ALC_FIXUP_ACT_PROBE);
return 0;
error:
......@@ -6146,8 +6146,6 @@ static int patch_alc861(struct hda_codec *codec)
set_beep_amp(spec, 0x23, 0, HDA_OUTPUT);
}
alc_apply_fixup(codec, ALC_FIXUP_ACT_PROBE);
codec->patch_ops = alc_patch_ops;
spec->init_hook = alc_auto_init_std;
#ifdef CONFIG_SND_HDA_POWER_SAVE
......@@ -6156,6 +6154,8 @@ static int patch_alc861(struct hda_codec *codec)
spec->loopback.amplist = alc861_loopbacks;
#endif
alc_apply_fixup(codec, ALC_FIXUP_ACT_PROBE);
return 0;
error:
......@@ -6270,8 +6270,6 @@ static int patch_alc861vd(struct hda_codec *codec)
set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT);
}
alc_apply_fixup(codec, ALC_FIXUP_ACT_PROBE);
codec->patch_ops = alc_patch_ops;
spec->init_hook = alc_auto_init_std;
......@@ -6281,6 +6279,8 @@ static int patch_alc861vd(struct hda_codec *codec)
spec->loopback.amplist = alc861vd_loopbacks;
#endif
alc_apply_fixup(codec, ALC_FIXUP_ACT_PROBE);
return 0;
error:
......@@ -6659,8 +6659,6 @@ static int patch_alc662(struct hda_codec *codec)
}
}
alc_apply_fixup(codec, ALC_FIXUP_ACT_PROBE);
codec->patch_ops = alc_patch_ops;
spec->init_hook = alc_auto_init_std;
spec->shutup = alc_eapd_shutup;
......@@ -6670,6 +6668,8 @@ static int patch_alc662(struct hda_codec *codec)
spec->loopback.amplist = alc662_loopbacks;
#endif
alc_apply_fixup(codec, ALC_FIXUP_ACT_PROBE);
return 0;
error:
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册