提交 5833041f 编写于 作者: J Johan Hovold 提交者: Greg Kroah-Hartman

USB: serial: remove unnecessary reinitialisations of urb->dev

Remove unnecessary reinitialisations of urb->dev before each submission,
which were based on the (no longer valid) assumption that serial->dev
will be set to NULL on close.

Compile-only tested.

Cc: Matthias Bruestle and Harald Welte <support@reiner-sct.com>
Cc: Lonnie Mendez <dignome@gmail.com>
Cc: Peter Berger <pberger@brimson.com>
Cc: Al Borchers <alborchers@steinerpoint.com>
Cc: Support Department <support@connecttech.com>
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
上级 016af7ec
......@@ -335,7 +335,6 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port)
goto out;
dbg("%s - submitting interrupt urb", __func__);
port->interrupt_in_urb->dev = serial->dev;
r = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (r) {
dev_err(&port->dev, "%s - failed submitting interrupt urb,"
......
......@@ -138,7 +138,6 @@ static int cyberjack_startup(struct usb_serial *serial)
for (i = 0; i < serial->num_ports; ++i) {
int result;
serial->port[i]->interrupt_in_urb->dev = serial->dev;
result = usb_submit_urb(serial->port[i]->interrupt_in_urb,
GFP_KERNEL);
if (result)
......@@ -347,7 +346,6 @@ static void cyberjack_read_int_callback(struct urb *urb)
spin_unlock(&priv->lock);
if (!old_rdtodo) {
port->read_urb->dev = port->serial->dev;
result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (result)
dev_err(&port->dev, "%s - failed resubmitting "
......@@ -358,7 +356,6 @@ static void cyberjack_read_int_callback(struct urb *urb)
}
resubmit:
port->interrupt_in_urb->dev = port->serial->dev;
result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
if (result)
dev_err(&port->dev, "usb_submit_urb(read int) failed\n");
......@@ -411,7 +408,6 @@ static void cyberjack_read_bulk_callback(struct urb *urb)
/* Continue to read if we have still urbs to do. */
if (todo /* || (urb->actual_length==port->bulk_in_endpointAddress)*/) {
port->read_urb->dev = port->serial->dev;
result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (result)
dev_err(&port->dev, "%s - failed resubmitting read "
......
......@@ -1136,8 +1136,6 @@ static void cypress_unthrottle(struct tty_struct *tty)
return;
if (actually_throttled) {
port->interrupt_in_urb->dev = port->serial->dev;
result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (result) {
dev_err(&port->dev, "%s - failed submitting read urb, "
......@@ -1326,7 +1324,6 @@ static void cypress_write_int_callback(struct urb *urb)
dbg("%s - nonzero write bulk status received: %d",
__func__, status);
port->interrupt_out_urb->transfer_buffer_length = 1;
port->interrupt_out_urb->dev = port->serial->dev;
result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC);
if (!result)
return;
......
......@@ -438,7 +438,6 @@ static int digi_write_oob_command(struct usb_serial_port *port,
len &= ~3;
memcpy(oob_port->write_urb->transfer_buffer, buf, len);
oob_port->write_urb->transfer_buffer_length = len;
oob_port->write_urb->dev = port->serial->dev;
ret = usb_submit_urb(oob_port->write_urb, GFP_ATOMIC);
if (ret == 0) {
oob_priv->dp_write_urb_in_use = 1;
......@@ -516,7 +515,6 @@ static int digi_write_inb_command(struct usb_serial_port *port,
memcpy(data, buf, len);
port->write_urb->transfer_buffer_length = len;
}
port->write_urb->dev = port->serial->dev;
ret = usb_submit_urb(port->write_urb, GFP_ATOMIC);
if (ret == 0) {
......@@ -587,7 +585,6 @@ static int digi_set_modem_signals(struct usb_serial_port *port,
data[7] = 0;
oob_port->write_urb->transfer_buffer_length = 8;
oob_port->write_urb->dev = port->serial->dev;
ret = usb_submit_urb(oob_port->write_urb, GFP_ATOMIC);
if (ret == 0) {
......@@ -683,10 +680,8 @@ static void digi_rx_unthrottle(struct tty_struct *tty)
spin_lock_irqsave(&priv->dp_port_lock, flags);
/* restart read chain */
if (priv->dp_throttle_restart) {
port->read_urb->dev = port->serial->dev;
if (priv->dp_throttle_restart)
ret = usb_submit_urb(port->read_urb, GFP_ATOMIC);
}
/* turn throttle off */
priv->dp_throttled = 0;
......@@ -979,7 +974,6 @@ static int digi_write(struct tty_struct *tty, struct usb_serial_port *port,
}
port->write_urb->transfer_buffer_length = data_len+2;
port->write_urb->dev = port->serial->dev;
*data++ = DIGI_CMD_SEND_DATA;
*data++ = data_len;
......@@ -1055,7 +1049,6 @@ static void digi_write_bulk_callback(struct urb *urb)
= (unsigned char)priv->dp_out_buf_len;
port->write_urb->transfer_buffer_length =
priv->dp_out_buf_len + 2;
port->write_urb->dev = serial->dev;
memcpy(port->write_urb->transfer_buffer + 2, priv->dp_out_buf,
priv->dp_out_buf_len);
ret = usb_submit_urb(port->write_urb, GFP_ATOMIC);
......@@ -1257,7 +1250,6 @@ static int digi_startup_device(struct usb_serial *serial)
/* set USB_DISABLE_SPD flag for write bulk urbs */
for (i = 0; i < serial->type->num_ports + 1; i++) {
port = serial->port[i];
port->write_urb->dev = port->serial->dev;
ret = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (ret != 0) {
dev_err(&port->dev,
......@@ -1400,7 +1392,6 @@ static void digi_read_bulk_callback(struct urb *urb)
}
/* continue read */
urb->dev = port->serial->dev;
ret = usb_submit_urb(urb, GFP_ATOMIC);
if (ret != 0 && ret != -EPERM) {
dev_err(&port->dev,
......
......@@ -901,7 +901,6 @@ static int garmin_init_session(struct usb_serial_port *port)
usb_kill_urb(port->interrupt_in_urb);
dbg("%s - adding interrupt input", __func__);
port->interrupt_in_urb->dev = serial->dev;
status = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (status)
dev_err(&serial->dev->dev,
......@@ -1353,7 +1352,6 @@ static void garmin_read_int_callback(struct urb *urb)
garmin_read_process(garmin_data_p, data, urb->actual_length, 0);
port->interrupt_in_urb->dev = port->serial->dev;
retval = usb_submit_urb(urb, GFP_ATOMIC);
if (retval)
dev_err(&urb->dev->dev,
......
......@@ -610,7 +610,6 @@ static void edge_interrupt_callback(struct urb *urb)
/* we have pending bytes on the
bulk in pipe, send a request */
edge_serial->read_urb->dev = edge_serial->serial->dev;
result = usb_submit_urb(edge_serial->read_urb, GFP_ATOMIC);
if (result) {
dev_err(&edge_serial->serial->dev->dev, "%s - usb_submit_urb(read bulk) failed with result = %d\n", __func__, result);
......@@ -711,7 +710,6 @@ static void edge_bulk_in_callback(struct urb *urb)
/* check to see if there's any more data for us to read */
if (edge_serial->rxBytesAvail > 0) {
dbg("%s - posting a read", __func__);
edge_serial->read_urb->dev = edge_serial->serial->dev;
retval = usb_submit_urb(edge_serial->read_urb, GFP_ATOMIC);
if (retval) {
dev_err(&urb->dev->dev,
......@@ -1330,7 +1328,6 @@ static void send_more_port_data(struct edgeport_serial *edge_serial,
edge_port->txCredits -= count;
edge_port->icount.tx += count;
urb->dev = edge_serial->serial->dev;
status = usb_submit_urb(urb, GFP_ATOMIC);
if (status) {
/* something went wrong */
......
......@@ -1770,12 +1770,11 @@ static void edge_bulk_in_callback(struct urb *urb)
exit:
/* continue read unless stopped */
spin_lock(&edge_port->ep_lock);
if (edge_port->ep_read_urb_state == EDGE_READ_URB_RUNNING) {
urb->dev = edge_port->port->serial->dev;
if (edge_port->ep_read_urb_state == EDGE_READ_URB_RUNNING)
retval = usb_submit_urb(urb, GFP_ATOMIC);
} else if (edge_port->ep_read_urb_state == EDGE_READ_URB_STOPPING) {
else if (edge_port->ep_read_urb_state == EDGE_READ_URB_STOPPING)
edge_port->ep_read_urb_state = EDGE_READ_URB_STOPPED;
}
spin_unlock(&edge_port->ep_lock);
if (retval)
dev_err(&urb->dev->dev,
......@@ -1954,7 +1953,6 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port)
}
urb->complete = edge_interrupt_callback;
urb->context = edge_serial;
urb->dev = dev;
status = usb_submit_urb(urb, GFP_KERNEL);
if (status) {
dev_err(&port->dev,
......@@ -1982,7 +1980,6 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port)
edge_port->ep_read_urb_state = EDGE_READ_URB_RUNNING;
urb->complete = edge_bulk_in_callback;
urb->context = edge_port;
urb->dev = dev;
status = usb_submit_urb(urb, GFP_KERNEL);
if (status) {
dev_err(&port->dev,
......@@ -2262,7 +2259,6 @@ static int restart_read(struct edgeport_port *edge_port)
urb = edge_port->port->read_urb;
urb->complete = edge_bulk_in_callback;
urb->context = edge_port;
urb->dev = edge_port->port->serial->dev;
status = usb_submit_urb(urb, GFP_ATOMIC);
}
edge_port->ep_read_urb_state = EDGE_READ_URB_RUNNING;
......
......@@ -330,7 +330,6 @@ static int keyspan_write(struct tty_struct *tty,
/* send the data out the bulk port */
this_urb->transfer_buffer_length = todo + dataOffset;
this_urb->dev = port->serial->dev;
err = usb_submit_urb(this_urb, GFP_ATOMIC);
if (err != 0)
dbg("usb_submit_urb(write bulk) failed (%d)", err);
......@@ -396,7 +395,6 @@ static void usa26_indat_callback(struct urb *urb)
tty_kref_put(tty);
/* Resubmit urb so we continue receiving */
urb->dev = port->serial->dev;
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err != 0)
dbg("%s - resubmit read urb failed. (%d)", __func__, err);
......@@ -492,7 +490,6 @@ static void usa26_instat_callback(struct urb *urb)
}
/* Resubmit urb so we continue receiving */
urb->dev = serial->dev;
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err != 0)
dbg("%s - resubmit read urb failed. (%d)", __func__, err);
......@@ -542,7 +539,6 @@ static void usa28_indat_callback(struct urb *urb)
tty_kref_put(tty);
/* Resubmit urb so we continue receiving */
urb->dev = port->serial->dev;
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err != 0)
dbg("%s - resubmit read urb failed. (%d)",
......@@ -627,7 +623,6 @@ static void usa28_instat_callback(struct urb *urb)
}
/* Resubmit urb so we continue receiving */
urb->dev = serial->dev;
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err != 0)
dbg("%s - resubmit read urb failed. (%d)", __func__, err);
......@@ -722,8 +717,6 @@ static void usa49_instat_callback(struct urb *urb)
}
/* Resubmit urb so we continue receiving */
urb->dev = serial->dev;
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err != 0)
dbg("%s - resubmit read urb failed. (%d)", __func__, err);
......@@ -781,7 +774,6 @@ static void usa49_indat_callback(struct urb *urb)
tty_kref_put(tty);
/* Resubmit urb so we continue receiving */
urb->dev = port->serial->dev;
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err != 0)
dbg("%s - resubmit read urb failed. (%d)", __func__, err);
......@@ -852,8 +844,6 @@ static void usa49wg_indat_callback(struct urb *urb)
}
/* Resubmit urb so we continue receiving */
urb->dev = serial->dev;
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err != 0)
dbg("%s - resubmit read urb failed. (%d)", __func__, err);
......@@ -929,7 +919,6 @@ static void usa90_indat_callback(struct urb *urb)
}
/* Resubmit urb so we continue receiving */
urb->dev = port->serial->dev;
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err != 0)
dbg("%s - resubmit read urb failed. (%d)", __func__, err);
......@@ -980,7 +969,6 @@ static void usa90_instat_callback(struct urb *urb)
}
/* Resubmit urb so we continue receiving */
urb->dev = serial->dev;
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err != 0)
dbg("%s - resubmit read urb failed. (%d)", __func__, err);
......@@ -1056,7 +1044,6 @@ static void usa67_instat_callback(struct urb *urb)
}
/* Resubmit urb so we continue receiving */
urb->dev = serial->dev;
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err != 0)
dbg("%s - resubmit read urb failed. (%d)", __func__, err);
......@@ -1156,7 +1143,6 @@ static int keyspan_open(struct tty_struct *tty, struct usb_serial_port *port)
urb = p_priv->in_urbs[i];
if (urb == NULL)
continue;
urb->dev = serial->dev;
/* make sure endpoint data toggle is synchronized
with the device */
......@@ -1172,7 +1158,6 @@ static int keyspan_open(struct tty_struct *tty, struct usb_serial_port *port)
urb = p_priv->out_urbs[i];
if (urb == NULL)
continue;
urb->dev = serial->dev;
/* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
usb_pipeout(urb->pipe), 0); */
}
......@@ -1889,7 +1874,6 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial,
/* send the data out the device on control endpoint */
this_urb->transfer_buffer_length = sizeof(msg);
this_urb->dev = serial->dev;
err = usb_submit_urb(this_urb, GFP_ATOMIC);
if (err != 0)
dbg("%s - usb_submit_urb(setup) failed (%d)", __func__, err);
......@@ -2017,7 +2001,6 @@ static int keyspan_usa28_send_setup(struct usb_serial *serial,
/* send the data out the device on control endpoint */
this_urb->transfer_buffer_length = sizeof(msg);
this_urb->dev = serial->dev;
err = usb_submit_urb(this_urb, GFP_ATOMIC);
if (err != 0)
dbg("%s - usb_submit_urb(setup) failed", __func__);
......@@ -2204,8 +2187,6 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial,
/* send the data out the device on control endpoint */
this_urb->transfer_buffer_length = sizeof(msg);
this_urb->dev = serial->dev;
}
err = usb_submit_urb(this_urb, GFP_ATOMIC);
if (err != 0)
......@@ -2348,7 +2329,6 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial,
/* send the data out the device on control endpoint */
this_urb->transfer_buffer_length = sizeof(msg);
this_urb->dev = serial->dev;
err = usb_submit_urb(this_urb, GFP_ATOMIC);
if (err != 0)
dbg("%s - usb_submit_urb(setup) failed (%d)", __func__, err);
......@@ -2494,7 +2474,6 @@ static int keyspan_usa67_send_setup(struct usb_serial *serial,
/* send the data out the device on control endpoint */
this_urb->transfer_buffer_length = sizeof(msg);
this_urb->dev = serial->dev;
err = usb_submit_urb(this_urb, GFP_ATOMIC);
if (err != 0)
......@@ -2583,14 +2562,12 @@ static int keyspan_startup(struct usb_serial *serial)
keyspan_setup_urbs(serial);
if (s_priv->instat_urb != NULL) {
s_priv->instat_urb->dev = serial->dev;
err = usb_submit_urb(s_priv->instat_urb, GFP_KERNEL);
if (err != 0)
dbg("%s - submit instat urb failed %d", __func__,
err);
}
if (s_priv->indat_urb != NULL) {
s_priv->indat_urb->dev = serial->dev;
err = usb_submit_urb(s_priv->indat_urb, GFP_KERNEL);
if (err != 0)
dbg("%s - submit indat urb failed %d", __func__,
......
......@@ -237,7 +237,6 @@ static void keyspan_pda_rx_unthrottle(struct tty_struct *tty)
struct usb_serial_port *port = tty->driver_data;
/* just restart the receive interrupt URB */
dbg("keyspan_pda_rx_unthrottle port %d", port->number);
port->interrupt_in_urb->dev = port->serial->dev;
if (usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL))
dbg(" usb_submit_urb(read urb) failed");
}
......@@ -545,7 +544,6 @@ static int keyspan_pda_write(struct tty_struct *tty,
priv->tx_room -= count;
port->write_urb->dev = port->serial->dev;
rc = usb_submit_urb(port->write_urb, GFP_ATOMIC);
if (rc) {
dbg(" usb_submit_urb(write bulk) failed");
......@@ -664,7 +662,6 @@ static int keyspan_pda_open(struct tty_struct *tty,
priv->tx_throttled = *room ? 0 : 1;
/*Start reading from the device*/
port->interrupt_in_urb->dev = serial->dev;
rc = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (rc) {
dbg("%s - usb_submit_urb(read int) failed", __func__);
......
......@@ -219,9 +219,6 @@ static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port)
dbg("%s - port %d", __func__, port->number);
priv = usb_get_serial_port_data(port);
/* someone sets the dev to 0 if the close method has been called */
port->interrupt_in_urb->dev = port->serial->dev;
/* allocate memory for transfer buffer */
transfer_buffer = kzalloc(transfer_buffer_length, GFP_KERNEL);
if (!transfer_buffer)
......@@ -381,8 +378,6 @@ static void kobil_read_int_callback(struct urb *urb)
tty_flip_buffer_push(tty);
}
tty_kref_put(tty);
/* someone sets the dev to 0 if the close method has been called */
port->interrupt_in_urb->dev = port->serial->dev;
result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
dbg("%s - port %d Send read URB returns: %i",
......@@ -463,17 +458,9 @@ static int kobil_write(struct tty_struct *tty, struct usb_serial_port *port,
priv->filled = 0;
priv->cur_pos = 0;
/* someone sets the dev to 0 if the close method
has been called */
port->interrupt_in_urb->dev = port->serial->dev;
/* start reading (except TWIN and KAAN SIM) */
if (priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID ||
priv->device_type == KOBIL_ADAPTER_K_PRODUCT_ID) {
/* someone sets the dev to 0 if the close method has
been called */
port->interrupt_in_urb->dev = port->serial->dev;
result = usb_submit_urb(port->interrupt_in_urb,
GFP_NOIO);
dbg("%s - port %d Send read URB returns: %i",
......
......@@ -482,7 +482,6 @@ static int mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port)
mct_u232_msr_to_state(&priv->control_state, priv->last_msr);
spin_unlock_irqrestore(&priv->lock, flags);
port->read_urb->dev = port->serial->dev;
retval = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (retval) {
dev_err(&port->dev,
......@@ -491,7 +490,6 @@ static int mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port)
goto error;
}
port->interrupt_in_urb->dev = port->serial->dev;
retval = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (retval) {
usb_kill_urb(port->read_urb);
......
......@@ -940,8 +940,6 @@ static void mos7720_bulk_in_callback(struct urb *urb)
tty_kref_put(tty);
if (port->read_urb->status != -EINPROGRESS) {
port->read_urb->dev = port->serial->dev;
retval = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (retval)
dbg("usb_submit_urb(read bulk) failed, retval = %d",
......@@ -1727,8 +1725,6 @@ static void change_port_settings(struct tty_struct *tty,
write_mos_reg(serial, port_number, IER, 0x0c);
if (port->read_urb->status != -EINPROGRESS) {
port->read_urb->dev = serial->dev;
status = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (status)
dbg("usb_submit_urb(read bulk) failed, status = %d",
......@@ -1779,7 +1775,6 @@ static void mos7720_set_termios(struct tty_struct *tty,
change_port_settings(tty, mos7720_port, old_termios);
if (port->read_urb->status != -EINPROGRESS) {
port->read_urb->dev = serial->dev;
status = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (status)
dbg("usb_submit_urb(read bulk) failed, status = %d",
......
......@@ -792,8 +792,6 @@ static void mos7840_bulk_in_callback(struct urb *urb)
}
mos7840_port->read_urb->dev = serial->dev;
mos7840_port->read_urb_busy = true;
retval = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC);
......@@ -2058,7 +2056,6 @@ static void mos7840_change_port_settings(struct tty_struct *tty,
mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
if (mos7840_port->read_urb_busy == false) {
mos7840_port->read_urb->dev = serial->dev;
mos7840_port->read_urb_busy = true;
status = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC);
if (status) {
......@@ -2130,7 +2127,6 @@ static void mos7840_set_termios(struct tty_struct *tty,
}
if (mos7840_port->read_urb_busy == false) {
mos7840_port->read_urb->dev = serial->dev;
mos7840_port->read_urb_busy = true;
status = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC);
if (status) {
......
......@@ -154,6 +154,7 @@ static int omninet_open(struct tty_struct *tty, struct usb_serial_port *port)
port->read_urb->transfer_buffer,
port->read_urb->transfer_buffer_length,
omninet_read_bulk_callback, port);
result = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (result)
dev_err(&port->dev,
......@@ -262,7 +263,6 @@ static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port,
/* send the data out the bulk port, always 64 bytes */
wport->write_urb->transfer_buffer_length = 64;
wport->write_urb->dev = serial->dev;
result = usb_submit_urb(wport->write_urb, GFP_ATOMIC);
if (result) {
set_bit(0, &wport->write_urbs_free);
......
......@@ -384,7 +384,6 @@ static void opticon_unthrottle(struct tty_struct *tty)
priv->actually_throttled = false;
spin_unlock_irqrestore(&priv->lock, flags);
priv->bulk_read_urb->dev = port->serial->dev;
if (was_throttled) {
result = usb_submit_urb(priv->bulk_read_urb, GFP_ATOMIC);
if (result)
......
......@@ -264,7 +264,6 @@ static void setup_line(struct work_struct *work)
spin_unlock_irqrestore(&priv->lock, flags);
dbg("%s(): submitting interrupt urb", __func__);
port->interrupt_in_urb->dev = port->serial->dev;
result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (result != 0) {
dev_err(&port->dev, "%s(): usb_submit_urb() failed"
......@@ -321,7 +320,6 @@ static void send_data(struct work_struct *work)
priv->flags.write_urb_in_use = 0;
dbg("%s(): submitting interrupt urb", __func__);
port->interrupt_in_urb->dev = port->serial->dev;
result = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO);
if (result != 0) {
dev_err(&port->dev, "%s(): usb_submit_urb() failed"
......@@ -334,7 +332,6 @@ static void send_data(struct work_struct *work)
port->write_urb->transfer_buffer,
count, &port->lock);
port->write_urb->transfer_buffer_length = count;
port->write_urb->dev = port->serial->dev;
result = usb_submit_urb(port->write_urb, GFP_NOIO);
if (result != 0) {
dev_err(&port->dev, "%s(): usb_submit_urb() failed"
......@@ -583,7 +580,6 @@ static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port)
kfree(buf);
dbg("%s(): submitting interrupt urb", __func__);
port->interrupt_in_urb->dev = serial->dev;
result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (result != 0) {
dev_err(&port->dev, "%s(): usb_submit_urb() failed"
......@@ -837,7 +833,6 @@ static void oti6858_read_int_callback(struct urb *urb)
if (can_recv) {
int result;
port->read_urb->dev = port->serial->dev;
result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (result != 0) {
priv->flags.read_urb_in_use = 0;
......@@ -866,7 +861,6 @@ static void oti6858_read_int_callback(struct urb *urb)
int result;
/* dbg("%s(): submitting interrupt urb", __func__); */
urb->dev = port->serial->dev;
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result != 0) {
dev_err(&urb->dev->dev,
......@@ -918,7 +912,6 @@ static void oti6858_read_bulk_callback(struct urb *urb)
tty_kref_put(tty);
/* schedule the interrupt urb */
port->interrupt_in_urb->dev = port->serial->dev;
result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
if (result != 0 && result != -EPERM) {
dev_err(&port->dev, "%s(): usb_submit_urb() failed,"
......@@ -955,7 +948,6 @@ static void oti6858_write_bulk_callback(struct urb *urb)
dbg("%s(): overflow in write", __func__);
port->write_urb->transfer_buffer_length = 1;
port->write_urb->dev = port->serial->dev;
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
if (result) {
dev_err(&port->dev, "%s(): usb_submit_urb() failed,"
......@@ -968,7 +960,6 @@ static void oti6858_write_bulk_callback(struct urb *urb)
priv->flags.write_urb_in_use = 0;
/* schedule the interrupt urb if we are still open */
port->interrupt_in_urb->dev = port->serial->dev;
dbg("%s(): submitting interrupt urb", __func__);
result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
if (result != 0) {
......
......@@ -681,7 +681,6 @@ static void sierra_instat_callback(struct urb *urb)
/* Resubmit urb so we continue receiving IRQ data */
if (status != -ESHUTDOWN && status != -ENOENT) {
usb_mark_last_busy(serial->dev);
urb->dev = serial->dev;
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err && err != -EPERM)
dev_err(&port->dev, "%s: resubmit intr urb "
......
......@@ -182,7 +182,6 @@ static void symbol_unthrottle(struct tty_struct *tty)
priv->actually_throttled = false;
spin_unlock_irq(&priv->lock);
priv->int_urb->dev = port->serial->dev;
if (was_throttled) {
result = usb_submit_urb(priv->int_urb, GFP_KERNEL);
if (result)
......
......@@ -537,7 +537,6 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port)
}
urb->complete = ti_interrupt_callback;
urb->context = tdev;
urb->dev = dev;
status = usb_submit_urb(urb, GFP_KERNEL);
if (status) {
dev_err(&port->dev,
......@@ -621,7 +620,6 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port)
tport->tp_read_urb_state = TI_READ_URB_RUNNING;
urb->complete = ti_bulk_in_callback;
urb->context = tport;
urb->dev = dev;
status = usb_submit_urb(urb, GFP_KERNEL);
if (status) {
dev_err(&port->dev, "%s - submit read urb failed, %d\n",
......@@ -1236,12 +1234,11 @@ static void ti_bulk_in_callback(struct urb *urb)
exit:
/* continue to read unless stopping */
spin_lock(&tport->tp_lock);
if (tport->tp_read_urb_state == TI_READ_URB_RUNNING) {
urb->dev = port->serial->dev;
if (tport->tp_read_urb_state == TI_READ_URB_RUNNING)
retval = usb_submit_urb(urb, GFP_ATOMIC);
} else if (tport->tp_read_urb_state == TI_READ_URB_STOPPING) {
else if (tport->tp_read_urb_state == TI_READ_URB_STOPPING)
tport->tp_read_urb_state = TI_READ_URB_STOPPED;
}
spin_unlock(&tport->tp_lock);
if (retval)
dev_err(dev, "%s - resubmit read urb failed, %d\n",
......@@ -1576,7 +1573,6 @@ static int ti_restart_read(struct ti_port *tport, struct tty_struct *tty)
spin_unlock_irqrestore(&tport->tp_lock, flags);
urb->complete = ti_bulk_in_callback;
urb->context = tport;
urb->dev = tport->tp_port->serial->dev;
status = usb_submit_urb(urb, GFP_KERNEL);
} else {
tport->tp_read_urb_state = TI_READ_URB_RUNNING;
......
......@@ -702,7 +702,6 @@ static void whiteheat_close(struct usb_serial_port *port)
static int whiteheat_write(struct tty_struct *tty,
struct usb_serial_port *port, const unsigned char *buf, int count)
{
struct usb_serial *serial = port->serial;
struct whiteheat_private *info = usb_get_serial_port_data(port);
struct whiteheat_urb_wrap *wrap;
struct urb *urb;
......@@ -738,7 +737,6 @@ static int whiteheat_write(struct tty_struct *tty,
usb_serial_debug_data(debug, &port->dev,
__func__, bytes, urb->transfer_buffer);
urb->dev = serial->dev;
urb->transfer_buffer_length = bytes;
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result) {
......@@ -984,7 +982,6 @@ static void command_port_read_callback(struct urb *urb)
dbg("%s - bad reply from firmware", __func__);
/* Continue trying to always read */
command_port->read_urb->dev = command_port->serial->dev;
result = usb_submit_urb(command_port->read_urb, GFP_ATOMIC);
if (result)
dbg("%s - failed resubmitting read urb, error %d",
......@@ -1090,7 +1087,6 @@ static int firm_send_command(struct usb_serial_port *port, __u8 command,
transfer_buffer[0] = command;
memcpy(&transfer_buffer[1], data, datasize);
command_port->write_urb->transfer_buffer_length = datasize + 1;
command_port->write_urb->dev = port->serial->dev;
retval = usb_submit_urb(command_port->write_urb, GFP_NOIO);
if (retval) {
dbg("%s - submit urb failed", __func__);
......@@ -1311,7 +1307,6 @@ static int start_command_port(struct usb_serial *serial)
/* Work around HCD bugs */
usb_clear_halt(serial->dev, command_port->read_urb->pipe);
command_port->read_urb->dev = serial->dev;
retval = usb_submit_urb(command_port->read_urb, GFP_KERNEL);
if (retval) {
dev_err(&serial->dev->dev,
......@@ -1359,7 +1354,6 @@ static int start_port_read(struct usb_serial_port *port)
list_del(tmp);
wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
urb = wrap->urb;
urb->dev = port->serial->dev;
spin_unlock_irqrestore(&info->lock, flags);
retval = usb_submit_urb(urb, GFP_KERNEL);
if (retval) {
......@@ -1439,7 +1433,6 @@ static void rx_data_softint(struct work_struct *work)
sent += tty_insert_flip_string(tty,
urb->transfer_buffer, urb->actual_length);
urb->dev = port->serial->dev;
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result) {
dev_err(&port->dev,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册