Merge branch 'linus' into x86/boot, to pick up fixes

Signed-off-by: NIngo Molnar <mingo@kernel.org>

.mailmap

@@ -88,6 +88,7 @@ Kay Sievers <kay.sievers@vrfy.org>
 Kenneth W Chen <kenneth.w.chen@intel.com>
 Konstantin Khlebnikov <koct9i@gmail.com> <k.khlebnikov@samsung.com>
 Koushik <raghavendra.koushik@neterion.com>
+Krzysztof Kozlowski <krzk@kernel.org> <k.kozlowski@samsung.com>
 Krzysztof Kozlowski <krzk@kernel.org> <k.kozlowski.k@gmail.com>
 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
 Leonid I Ananiev <leonid.i.ananiev@intel.com>

Documentation/arm/CCN.txt

@@ -18,13 +18,17 @@ and config2 fields of the perf_event_attr structure. The "events"
 directory provides configuration templates for all documented
 events, that can be used with perf tool. For example "xp_valid_flit"
 is an equivalent of "type=0x8,event=0x4". Other parameters must be
-explicitly specified. For events originating from device, "node"
-defines its index. All crosspoint events require "xp" (index),
-"port" (device port number) and "vc" (virtual channel ID) and
-"dir" (direction). Watchpoints (special "event" value 0xfe) also
-require comparator values ("cmp_l" and "cmp_h") and "mask", being
-index of the comparator mask.
+explicitly specified.
 
+For events originating from device, "node" defines its index.
+
+Crosspoint PMU events require "xp" (index), "bus" (bus number)
+and "vc" (virtual channel ID).
+
+Crosspoint watchpoint-based events (special "event" value 0xfe)
+require "xp" and "vc" as as above plus "port" (device port index),
+"dir" (transmit/receive direction), comparator values ("cmp_l"
+and "cmp_h") and "mask", being index of the comparator mask.
 Masks are defined separately from the event description
 (due to limited number of the config values) in the "cmp_mask"
 directory, with first 8 configurable by user and additional

Documentation/cpu-freq/cpufreq-stats.txt

@@ -103,7 +103,7 @@ Config Main Menu
 	Power management options (ACPI, APM)  --->
 		CPU Frequency scaling  --->
 			[*] CPU Frequency scaling
-			<*>   CPU frequency translation statistics 
+			[*]   CPU frequency translation statistics
 			[*]     CPU frequency translation statistics details
 
 

Documentation/devicetree/bindings/mmc/sdhci-st.txt

@@ -10,7 +10,7 @@ Required properties:
 			subsystem (mmcss) inside the FlashSS (available in STiH407 SoC
 			family).
 
-- clock-names:		Should be "mmc".
+- clock-names:		Should be "mmc" and "icn".  (NB: The latter is not compulsory)
 			See: Documentation/devicetree/bindings/resource-names.txt
 - clocks:		Phandle to the clock.
 			See: Documentation/devicetree/bindings/clock/clock-bindings.txt

Documentation/i2c/slave-interface

@@ -145,6 +145,11 @@ If you want to add slave support to the bus driver:
 
 * Catch the slave interrupts and send appropriate i2c_slave_events to the backend.
 
+Note that most hardware supports being master _and_ slave on the same bus. So,
+if you extend a bus driver, please make sure that the driver supports that as
+well. In almost all cases, slave support does not need to disable the master
+functionality.
+
 Check the i2c-rcar driver as an example.
 
 

MAINTAINERS

@@ -1624,7 +1624,8 @@ N:	rockchip
 
 ARM/SAMSUNG EXYNOS ARM ARCHITECTURES
 M:	Kukjin Kim <kgene@kernel.org>
-M:	Krzysztof Kozlowski <k.kozlowski@samsung.com>
+M:	Krzysztof Kozlowski <krzk@kernel.org>
+R:	Javier Martinez Canillas <javier@osg.samsung.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
 S:	Maintained
@@ -1831,6 +1832,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson.git
 ARM/UNIPHIER ARCHITECTURE
 M:	Masahiro Yamada <yamada.masahiro@socionext.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier.git
 S:	Maintained
 F:	arch/arm/boot/dts/uniphier*
 F:	arch/arm/include/asm/hardware/cache-uniphier.h
@@ -2484,7 +2486,7 @@ F:	include/net/bluetooth/
 BONDING DRIVER
 M:	Jay Vosburgh <j.vosburgh@gmail.com>
 M:	Veaceslav Falico <vfalico@gmail.com>
-M:	Andy Gospodarek <gospo@cumulusnetworks.com>
+M:	Andy Gospodarek <andy@greyhouse.net>
 L:	netdev@vger.kernel.org
 W:	http://sourceforge.net/projects/bonding/
 S:	Supported
@@ -3268,7 +3270,7 @@ S:	Maintained
 F:	drivers/net/wan/cosa*
 
 CPMAC ETHERNET DRIVER
-M:	Florian Fainelli <florian@openwrt.org>
+M:	Florian Fainelli <f.fainelli@gmail.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ethernet/ti/cpmac.c
@@ -6101,7 +6103,7 @@ S:	Supported
 F:	drivers/cpufreq/intel_pstate.c
 
 INTEL FRAMEBUFFER DRIVER (excluding 810 and 815)
-M:	Maik Broemme <mbroemme@plusserver.de>
+M:	Maik Broemme <mbroemme@libmpq.org>
 L:	linux-fbdev@vger.kernel.org
 S:	Maintained
 F:	Documentation/fb/intelfb.txt
@@ -7464,7 +7466,8 @@ F:	Documentation/devicetree/bindings/sound/max9860.txt
 F:	sound/soc/codecs/max9860.*
 
 MAXIM MUIC CHARGER DRIVERS FOR EXYNOS BASED BOARDS
-M:	Krzysztof Kozlowski <k.kozlowski@samsung.com>
+M:	Krzysztof Kozlowski <krzk@kernel.org>
+M:	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
 L:	linux-pm@vger.kernel.org
 S:	Supported
 F:	drivers/power/max14577_charger.c
@@ -7480,7 +7483,8 @@ F:	include/dt-bindings/*/*max77802.h
 
 MAXIM PMIC AND MUIC DRIVERS FOR EXYNOS BASED BOARDS
 M:	Chanwoo Choi <cw00.choi@samsung.com>
-M:	Krzysztof Kozlowski <k.kozlowski@samsung.com>
+M:	Krzysztof Kozlowski <krzk@kernel.org>
+M:	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
 L:	linux-kernel@vger.kernel.org
 S:	Supported
 F:	drivers/*/max14577*.c
@@ -9246,7 +9250,7 @@ F:	drivers/pinctrl/sh-pfc/
 
 PIN CONTROLLER - SAMSUNG
 M:	Tomasz Figa <tomasz.figa@gmail.com>
-M:	Krzysztof Kozlowski <k.kozlowski@samsung.com>
+M:	Krzysztof Kozlowski <krzk@kernel.org>
 M:	Sylwester Nawrocki <s.nawrocki@samsung.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
@@ -10179,7 +10183,7 @@ S:	Maintained
 F:	drivers/platform/x86/samsung-laptop.c
 
 SAMSUNG AUDIO (ASoC) DRIVERS
-M:	Krzysztof Kozlowski <k.kozlowski@samsung.com>
+M:	Krzysztof Kozlowski <krzk@kernel.org>
 M:	Sangbeom Kim <sbkim73@samsung.com>
 M:	Sylwester Nawrocki <s.nawrocki@samsung.com>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
@@ -10194,7 +10198,8 @@ F:	drivers/video/fbdev/s3c-fb.c
 
 SAMSUNG MULTIFUNCTION PMIC DEVICE DRIVERS
 M:	Sangbeom Kim <sbkim73@samsung.com>
-M:	Krzysztof Kozlowski <k.kozlowski@samsung.com>
+M:	Krzysztof Kozlowski <krzk@kernel.org>
+M:	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
 L:	linux-kernel@vger.kernel.org
 L:	linux-samsung-soc@vger.kernel.org
 S:	Supported
@@ -12564,7 +12569,7 @@ F:	include/linux/if_*vlan.h
 F:	net/8021q/
 
 VLYNQ BUS
-M:	Florian Fainelli <florian@openwrt.org>
+M:	Florian Fainelli <f.fainelli@gmail.com>
 L:	openwrt-devel@lists.openwrt.org (subscribers-only)
 S:	Maintained
 F:	drivers/vlynq/vlynq.c

Makefile

 VERSION = 4
 PATCHLEVEL = 8
 SUBLEVEL = 0
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc7
 NAME = Psychotic Stoned Sheep
 
 # *DOCUMENTATION*

arch/alpha/include/asm/uaccess.h

@@ -371,14 +371,6 @@ __copy_tofrom_user_nocheck(void *to, const void *from, long len)
 	return __cu_len;
 }
 
-extern inline long
-__copy_tofrom_user(void *to, const void *from, long len, const void __user *validate)
-{
-	if (__access_ok((unsigned long)validate, len, get_fs()))
-		len = __copy_tofrom_user_nocheck(to, from, len);
-	return len;
-}
-
 #define __copy_to_user(to, from, n)					\
 ({									\
 	__chk_user_ptr(to);						\
@@ -393,17 +385,22 @@ __copy_tofrom_user(void *to, const void *from, long len, const void __user *vali
 #define __copy_to_user_inatomic __copy_to_user
 #define __copy_from_user_inatomic __copy_from_user
 
-
 extern inline long
 copy_to_user(void __user *to, const void *from, long n)
 {
-	return __copy_tofrom_user((__force void *)to, from, n, to);
+	if (likely(__access_ok((unsigned long)to, n, get_fs())))
+		n = __copy_tofrom_user_nocheck((__force void *)to, from, n);
+	return n;
 }
 
 extern inline long
 copy_from_user(void *to, const void __user *from, long n)
 {
-	return __copy_tofrom_user(to, (__force void *)from, n, from);
+	if (likely(__access_ok((unsigned long)from, n, get_fs())))
+		n = __copy_tofrom_user_nocheck(to, (__force void *)from, n);
+	else
+		memset(to, 0, n);
+	return n;
 }
 
 extern void __do_clear_user(void);

arch/arc/include/asm/uaccess.h

@@ -83,7 +83,10 @@
 	"2:	;nop\n"				\
 	"	.section .fixup, \"ax\"\n"	\
 	"	.align 4\n"			\
-	"3:	mov %0, %3\n"			\
+	"3:	# return -EFAULT\n"		\
+	"	mov %0, %3\n"			\
+	"	# zero out dst ptr\n"		\
+	"	mov %1,  0\n"			\
 	"	j   2b\n"			\
 	"	.previous\n"			\
 	"	.section __ex_table, \"a\"\n"	\
@@ -101,7 +104,11 @@
 	"2:	;nop\n"				\
 	"	.section .fixup, \"ax\"\n"	\
 	"	.align 4\n"			\
-	"3:	mov %0, %3\n"			\
+	"3:	# return -EFAULT\n"		\
+	"	mov %0, %3\n"			\
+	"	# zero out dst ptr\n"		\
+	"	mov %1,  0\n"			\
+	"	mov %R1, 0\n"			\
 	"	j   2b\n"			\
 	"	.previous\n"			\
 	"	.section __ex_table, \"a\"\n"	\

arch/arm/boot/dts/am335x-baltos.dtsi

@@ -226,7 +226,7 @@
 
 		#address-cells = <1>;
 		#size-cells = <1>;
-		elm_id = <&elm>;
+		ti,elm-id = <&elm>;
 	};
 };
 

arch/arm/boot/dts/am335x-igep0033.dtsi

@@ -161,7 +161,7 @@
 
 		#address-cells = <1>;
 		#size-cells = <1>;
-		elm_id = <&elm>;
+		ti,elm-id = <&elm>;
 
 		/* MTD partition table */
 		partition@0 {

arch/arm/boot/dts/am335x-phycore-som.dtsi

@@ -197,7 +197,7 @@
 		gpmc,wr-access-ns = <30>;
 		gpmc,wr-data-mux-bus-ns = <0>;
 
-		elm_id = <&elm>;
+		ti,elm-id = <&elm>;
 
 		#address-cells = <1>;
 		#size-cells = <1>;

arch/arm/boot/dts/armada-388-clearfog.dts

@@ -390,12 +390,12 @@
 
 			port@0 {
 				reg = <0>;
-				label = "lan1";
+				label = "lan5";
 			};
 
 			port@1 {
 				reg = <1>;
-				label = "lan2";
+				label = "lan4";
 			};
 
 			port@2 {
@@ -405,12 +405,12 @@
 
 			port@3 {
 				reg = <3>;
-				label = "lan4";
+				label = "lan2";
 			};
 
 			port@4 {
 				reg = <4>;
-				label = "lan5";
+				label = "lan1";
 			};
 
 			port@5 {

arch/arm/boot/dts/bcm2835-rpi.dtsi

@@ -2,6 +2,7 @@
 
 / {
 	memory {
+		device_type = "memory";
 		reg = <0 0x10000000>;
 	};
 

arch/arm/boot/dts/bcm283x.dtsi

@@ -2,7 +2,6 @@
 #include <dt-bindings/clock/bcm2835.h>
 #include <dt-bindings/clock/bcm2835-aux.h>
 #include <dt-bindings/gpio/gpio.h>
-#include "skeleton.dtsi"
 
 /* This include file covers the common peripherals and configuration between
  * bcm2835 and bcm2836 implementations, leaving the CPU configuration to
@@ -13,6 +12,8 @@
 	compatible = "brcm,bcm2835";
 	model = "BCM2835";
 	interrupt-parent = <&intc>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	chosen {
 		bootargs = "earlyprintk console=ttyAMA0";

arch/arm/boot/dts/exynos5410-odroidxu.dts

@@ -447,14 +447,11 @@
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <0 4>;
 	samsung,dw-mshc-ddr-timing = <0 2>;
-	samsung,dw-mshc-hs400-timing = <0 2>;
-	samsung,read-strobe-delay = <90>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd>;
 	bus-width = <8>;
 	cap-mmc-highspeed;
 	mmc-hs200-1_8v;
-	mmc-hs400-1_8v;
 	vmmc-supply = <&ldo20_reg>;
 	vqmmc-supply = <&ldo11_reg>;
 };

arch/arm/boot/dts/imx6qdl.dtsi

@@ -243,7 +243,7 @@
 					clocks = <&clks IMX6QDL_CLK_SPDIF_GCLK>, <&clks IMX6QDL_CLK_OSC>,
 						 <&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_ASRC>,
 						 <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_ESAI_EXTAL>,
-						 <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_MLB>,
+						 <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_DUMMY>,
 						 <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_SPBA>;
 					clock-names = "core",  "rxtx0",
 						      "rxtx1", "rxtx2",

arch/arm/boot/dts/imx6sx-sabreauto.dts

@@ -64,7 +64,7 @@
 	cd-gpios = <&gpio7 11 GPIO_ACTIVE_LOW>;
 	no-1-8-v;
 	keep-power-in-suspend;
-	enable-sdio-wakup;
+	wakeup-source;
 	status = "okay";
 };
 

arch/arm/boot/dts/imx7d-sdb.dts

@@ -131,7 +131,7 @@
 		ti,y-min = /bits/ 16 <0>;
 		ti,y-max = /bits/ 16 <0>;
 		ti,pressure-max = /bits/ 16 <0>;
-		ti,x-plat-ohms = /bits/ 16 <400>;
+		ti,x-plate-ohms = /bits/ 16 <400>;
 		wakeup-source;
 	};
 };

arch/arm/boot/dts/kirkwood-ib62x0.dts

@@ -113,7 +113,7 @@
 
 	partition@e0000 {
 		label = "u-boot environment";
-		reg = <0xe0000 0x100000>;
+		reg = <0xe0000 0x20000>;
 	};
 
 	partition@100000 {

arch/arm/boot/dts/kirkwood-openrd.dtsi

@@ -116,6 +116,10 @@
 	};
 };
 
+&pciec {
+	status = "okay";
+};
+
 &pcie0 {
 	status = "okay";
 };

arch/arm/boot/dts/logicpd-som-lv.dtsi

@@ -35,10 +35,15 @@
 	ranges = <0 0 0x00000000 0x1000000>;	/* CS0: 16MB for NAND */
 
 	nand@0,0 {
-		linux,mtd-name = "micron,mt29f4g16abbda3w";
+		compatible = "ti,omap2-nand";
 		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		linux,mtd-name = "micron,mt29f4g16abbda3w";
 		nand-bus-width = <16>;
 		ti,nand-ecc-opt = "bch8";
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 		gpmc,sync-clk-ps = <0>;
 		gpmc,cs-on-ns = <0>;
 		gpmc,cs-rd-off-ns = <44>;
@@ -54,10 +59,6 @@
 		gpmc,wr-access-ns = <40>;
 		gpmc,wr-data-mux-bus-ns = <0>;
 		gpmc,device-width = <2>;
-
-		gpmc,page-burst-access-ns = <5>;
-		gpmc,cycle2cycle-delay-ns = <50>;
-
 		#address-cells = <1>;
 		#size-cells = <1>;
 

arch/arm/boot/dts/logicpd-torpedo-som.dtsi

@@ -46,6 +46,7 @@
 		linux,mtd-name = "micron,mt29f4g16abbda3w";
 		nand-bus-width = <16>;
 		ti,nand-ecc-opt = "bch8";
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 		gpmc,sync-clk-ps = <0>;
 		gpmc,cs-on-ns = <0>;
 		gpmc,cs-rd-off-ns = <44>;

arch/arm/boot/dts/omap3-overo-base.dtsi

@@ -223,7 +223,9 @@
 };
 
 &gpmc {
-	ranges = <0 0 0x00000000 0x20000000>;
+	ranges = <0 0 0x30000000 0x1000000>,	/* CS0 */
+		 <4 0 0x2b000000 0x1000000>,	/* CS4 */
+		 <5 0 0x2c000000 0x1000000>;	/* CS5 */
 
 	nand@0,0 {
 		compatible = "ti,omap2-nand";

arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi

@@ -55,8 +55,6 @@
 #include "omap-gpmc-smsc9221.dtsi"
 
 &gpmc {
-	ranges = <5 0 0x2c000000 0x1000000>;	/* CS5 */
-
 	ethernet@gpmc {
 		reg = <5 0 0xff>;
 		interrupt-parent = <&gpio6>;

arch/arm/boot/dts/omap3-overo-tobi-common.dtsi

@@ -27,8 +27,6 @@
 #include "omap-gpmc-smsc9221.dtsi"
 
 &gpmc {
-	ranges = <5 0 0x2c000000 0x1000000>;	/* CS5 */
-
 	ethernet@gpmc {
 		reg = <5 0 0xff>;
 		interrupt-parent = <&gpio6>;

arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi

@@ -15,9 +15,6 @@
 #include "omap-gpmc-smsc9221.dtsi"
 
 &gpmc {
-	ranges = <4 0 0x2b000000 0x1000000>,	/* CS4 */
-		 <5 0 0x2c000000 0x1000000>;	/* CS5 */
-
 	smsc1: ethernet@gpmc {
 		reg = <5 0 0xff>;
 		interrupt-parent = <&gpio6>;

arch/arm/boot/dts/stih407-family.dtsi

@@ -550,8 +550,9 @@
 			interrupt-names = "mmcirq";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_mmc0>;
-			clock-names = "mmc";
-			clocks = <&clk_s_c0_flexgen CLK_MMC_0>;
+			clock-names = "mmc", "icn";
+			clocks = <&clk_s_c0_flexgen CLK_MMC_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_HVA>;
 			bus-width = <8>;
 			non-removable;
 		};
@@ -565,8 +566,9 @@
 			interrupt-names = "mmcirq";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_sd1>;
-			clock-names = "mmc";
-			clocks = <&clk_s_c0_flexgen CLK_MMC_1>;
+			clock-names = "mmc", "icn";
+			clocks = <&clk_s_c0_flexgen CLK_MMC_1>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_HVA>;
 			resets = <&softreset STIH407_MMC1_SOFTRESET>;
 			bus-width = <4>;
 		};

arch/arm/boot/dts/stih410.dtsi

@@ -41,7 +41,8 @@
 			compatible = "st,st-ohci-300x";
 			reg = <0x9a03c00 0x100>;
 			interrupts = <GIC_SPI 180 IRQ_TYPE_NONE>;
-			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
 			resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
 				 <&softreset STIH407_USB2_PORT0_SOFTRESET>;
 			reset-names = "power", "softreset";
@@ -57,7 +58,8 @@
 			interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb0>;
-			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
 			resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
 				 <&softreset STIH407_USB2_PORT0_SOFTRESET>;
 			reset-names = "power", "softreset";
@@ -71,7 +73,8 @@
 			compatible = "st,st-ohci-300x";
 			reg = <0x9a83c00 0x100>;
 			interrupts = <GIC_SPI 181 IRQ_TYPE_NONE>;
-			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
 			resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
 				 <&softreset STIH407_USB2_PORT1_SOFTRESET>;
 			reset-names = "power", "softreset";
@@ -87,7 +90,8 @@
 			interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb1>;
-			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
 			resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
 				 <&softreset STIH407_USB2_PORT1_SOFTRESET>;
 			reset-names = "power", "softreset";

arch/arm/boot/dts/sun5i-a13.dtsi

@@ -84,7 +84,7 @@
 			trips {
 				cpu_alert0: cpu_alert0 {
 					/* milliCelsius */
-					temperature = <850000>;
+					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};

arch/arm/boot/dts/tegra114-dalmore.dts

@@ -897,7 +897,7 @@
 		palmas: tps65913@58 {
 			compatible = "ti,palmas";
 			reg = <0x58>;
-			interrupts = <0 86 IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
 
 			#interrupt-cells = <2>;
 			interrupt-controller;

arch/arm/boot/dts/tegra114-roth.dts

@@ -802,7 +802,7 @@
 		palmas: pmic@58 {
 			compatible = "ti,palmas";
 			reg = <0x58>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 
 			#interrupt-cells = <2>;
 			interrupt-controller;

arch/arm/boot/dts/tegra114-tn7.dts

@@ -63,7 +63,7 @@
 		palmas: pmic@58 {
 			compatible = "ti,palmas";
 			reg = <0x58>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 
 			#interrupt-cells = <2>;
 			interrupt-controller;

arch/arm/boot/dts/tegra124-jetson-tk1.dts

@@ -1382,7 +1382,7 @@
 	 *   Pin 41: BR_UART1_TXD
 	 *   Pin 44: BR_UART1_RXD
 	 */
-	serial@0,70006000 {
+	serial@70006000 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
 		status = "okay";
 	};
@@ -1394,7 +1394,7 @@
 	 *   Pin 71: UART2_CTS_L
 	 *   Pin 74: UART2_RTS_L
 	 */
-	serial@0,70006040 {
+	serial@70006040 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
 		status = "okay";
 	};

arch/arm/common/locomo.c

@@ -140,7 +140,7 @@ static struct locomo_dev_info locomo_devices[] = {
 
 static void locomo_handler(struct irq_desc *desc)
 {
-	struct locomo *lchip = irq_desc_get_chip_data(desc);
+	struct locomo *lchip = irq_desc_get_handler_data(desc);
 	int req, i;
 
 	/* Acknowledge the parent IRQ */
@@ -200,8 +200,7 @@ static void locomo_setup_irq(struct locomo *lchip)
 	 * Install handler for IRQ_LOCOMO_HW.
 	 */
 	irq_set_irq_type(lchip->irq, IRQ_TYPE_EDGE_FALLING);
-	irq_set_chip_data(lchip->irq, lchip);
-	irq_set_chained_handler(lchip->irq, locomo_handler);
+	irq_set_chained_handler_and_data(lchip->irq, locomo_handler, lchip);
 
 	/* Install handlers for IRQ_LOCOMO_* */
 	for ( ; irq <= lchip->irq_base + 3; irq++) {

arch/arm/common/sa1111.c

@@ -472,8 +472,8 @@ static int sa1111_setup_irq(struct sa1111 *sachip, unsigned irq_base)
 	 * specifies that S0ReadyInt and S1ReadyInt should be '1'.
 	 */
 	sa1111_writel(0, irqbase + SA1111_INTPOL0);
-	sa1111_writel(SA1111_IRQMASK_HI(IRQ_S0_READY_NINT) |
-		      SA1111_IRQMASK_HI(IRQ_S1_READY_NINT),
+	sa1111_writel(BIT(IRQ_S0_READY_NINT & 31) |
+		      BIT(IRQ_S1_READY_NINT & 31),
 		      irqbase + SA1111_INTPOL1);
 
 	/* clear all IRQs */
@@ -754,7 +754,7 @@ static int __sa1111_probe(struct device *me, struct resource *mem, int irq)
 	if (sachip->irq != NO_IRQ) {
 		ret = sa1111_setup_irq(sachip, pd->irq_base);
 		if (ret)
-			goto err_unmap;
+			goto err_clk;
 	}
 
 #ifdef CONFIG_ARCH_SA1100
@@ -799,6 +799,8 @@ static int __sa1111_probe(struct device *me, struct resource *mem, int irq)
 
 	return 0;
 
+ err_clk:
+	clk_disable(sachip->clk);
  err_unmap:
 	iounmap(sachip->base);
  err_clk_unprep:
@@ -869,9 +871,9 @@ struct sa1111_save_data {
 
 #ifdef CONFIG_PM
 
-static int sa1111_suspend(struct platform_device *dev, pm_message_t state)
+static int sa1111_suspend_noirq(struct device *dev)
 {
-	struct sa1111 *sachip = platform_get_drvdata(dev);
+	struct sa1111 *sachip = dev_get_drvdata(dev);
 	struct sa1111_save_data *save;
 	unsigned long flags;
 	unsigned int val;
@@ -934,9 +936,9 @@ static int sa1111_suspend(struct platform_device *dev, pm_message_t state)
  *	restored by their respective drivers, and must be called
  *	via LDM after this function.
  */
-static int sa1111_resume(struct platform_device *dev)
+static int sa1111_resume_noirq(struct device *dev)
 {
-	struct sa1111 *sachip = platform_get_drvdata(dev);
+	struct sa1111 *sachip = dev_get_drvdata(dev);
 	struct sa1111_save_data *save;
 	unsigned long flags, id;
 	void __iomem *base;
@@ -952,7 +954,7 @@ static int sa1111_resume(struct platform_device *dev)
 	id = sa1111_readl(sachip->base + SA1111_SKID);
 	if ((id & SKID_ID_MASK) != SKID_SA1111_ID) {
 		__sa1111_remove(sachip);
-		platform_set_drvdata(dev, NULL);
+		dev_set_drvdata(dev, NULL);
 		kfree(save);
 		return 0;
 	}
@@ -1003,8 +1005,8 @@ static int sa1111_resume(struct platform_device *dev)
 }
 
 #else
-#define sa1111_suspend NULL
-#define sa1111_resume  NULL
+#define sa1111_suspend_noirq NULL
+#define sa1111_resume_noirq  NULL
 #endif
 
 static int sa1111_probe(struct platform_device *pdev)
@@ -1017,7 +1019,7 @@ static int sa1111_probe(struct platform_device *pdev)
 		return -EINVAL;
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)
-		return -ENXIO;
+		return irq;
 
 	return __sa1111_probe(&pdev->dev, mem, irq);
 }
@@ -1038,6 +1040,11 @@ static int sa1111_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static struct dev_pm_ops sa1111_pm_ops = {
+	.suspend_noirq = sa1111_suspend_noirq,
+	.resume_noirq = sa1111_resume_noirq,
+};
+
 /*
  *	Not sure if this should be on the system bus or not yet.
  *	We really want some way to register a system device at
@@ -1050,10 +1057,9 @@ static int sa1111_remove(struct platform_device *pdev)
 static struct platform_driver sa1111_device_driver = {
 	.probe		= sa1111_probe,
 	.remove		= sa1111_remove,
-	.suspend	= sa1111_suspend,
-	.resume		= sa1111_resume,
 	.driver		= {
 		.name	= "sa1111",
+		.pm	= &sa1111_pm_ops,
 	},
 };
 

arch/arm/configs/keystone_defconfig

@@ -161,6 +161,7 @@ CONFIG_USB_MON=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_DWC3=y
+CONFIG_NOP_USB_XCEIV=y
 CONFIG_KEYSTONE_USB_PHY=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y

arch/arm/configs/multi_v7_defconfig

@@ -781,7 +781,7 @@ CONFIG_MXS_DMA=y
 CONFIG_DMA_BCM2835=y
 CONFIG_DMA_OMAP=y
 CONFIG_QCOM_BAM_DMA=y
-CONFIG_XILINX_VDMA=y
+CONFIG_XILINX_DMA=y
 CONFIG_DMA_SUN6I=y
 CONFIG_STAGING=y
 CONFIG_SENSORS_ISL29018=y

arch/arm/crypto/aes-ce-glue.c

@@ -284,7 +284,7 @@ static int ctr_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
 		err = blkcipher_walk_done(desc, &walk,
 					  walk.nbytes % AES_BLOCK_SIZE);
 	}
-	if (nbytes) {
+	if (walk.nbytes % AES_BLOCK_SIZE) {
 		u8 *tdst = walk.dst.virt.addr + blocks * AES_BLOCK_SIZE;
 		u8 *tsrc = walk.src.virt.addr + blocks * AES_BLOCK_SIZE;
 		u8 __aligned(8) tail[AES_BLOCK_SIZE];

arch/arm/include/asm/pgtable-2level-hwdef.h

@@ -47,6 +47,7 @@
 #define PMD_SECT_WB		(PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE)
 #define PMD_SECT_MINICACHE	(PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE)
 #define PMD_SECT_WBWA		(PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE)
+#define PMD_SECT_CACHE_MASK	(PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE)
 #define PMD_SECT_NONSHARED_DEV	(PMD_SECT_TEX(2))
 
 /*

arch/arm/include/asm/pgtable-3level-hwdef.h

@@ -62,6 +62,7 @@
 #define PMD_SECT_WT		(_AT(pmdval_t, 2) << 2)	/* normal inner write-through */
 #define PMD_SECT_WB		(_AT(pmdval_t, 3) << 2)	/* normal inner write-back */
 #define PMD_SECT_WBWA		(_AT(pmdval_t, 7) << 2)	/* normal inner write-alloc */
+#define PMD_SECT_CACHE_MASK	(_AT(pmdval_t, 7) << 2)
 
 /*
  * + Level 3 descriptor (PTE)

arch/arm/kernel/hyp-stub.S

@@ -142,6 +142,19 @@ ARM_BE8(orr	r7, r7, #(1 << 25))     @ HSCTLR.EE
 	and	r7, #0x1f		@ Preserve HPMN
 	mcr	p15, 4, r7, c1, c1, 1	@ HDCR
 
+	@ Make sure NS-SVC is initialised appropriately
+	mrc	p15, 0, r7, c1, c0, 0	@ SCTLR
+	orr	r7, #(1 << 5)		@ CP15 barriers enabled
+	bic	r7, #(3 << 7)		@ Clear SED/ITD for v8 (RES0 for v7)
+	bic	r7, #(3 << 19)		@ WXN and UWXN disabled
+	mcr	p15, 0, r7, c1, c0, 0	@ SCTLR
+
+	mrc	p15, 0, r7, c0, c0, 0	@ MIDR
+	mcr	p15, 4, r7, c0, c0, 0	@ VPIDR
+
+	mrc	p15, 0, r7, c0, c0, 5	@ MPIDR
+	mcr	p15, 4, r7, c0, c0, 5	@ VMPIDR
+
 #if !defined(ZIMAGE) && defined(CONFIG_ARM_ARCH_TIMER)
 	@ make CNTP_* and CNTPCT accessible from PL1
 	mrc	p15, 0, r7, c0, c1, 1	@ ID_PFR1

arch/arm/kvm/arm.c

@@ -158,8 +158,6 @@ void kvm_arch_destroy_vm(struct kvm *kvm)
 {
 	int i;
 
-	kvm_free_stage2_pgd(kvm);
-
 	for (i = 0; i < KVM_MAX_VCPUS; ++i) {
 		if (kvm->vcpus[i]) {
 			kvm_arch_vcpu_free(kvm->vcpus[i]);

arch/arm/kvm/mmu.c

@@ -1714,7 +1714,8 @@ int kvm_mmu_init(void)
 		 kern_hyp_va(PAGE_OFFSET), kern_hyp_va(~0UL));
 
 	if (hyp_idmap_start >= kern_hyp_va(PAGE_OFFSET) &&
-	    hyp_idmap_start <  kern_hyp_va(~0UL)) {
+	    hyp_idmap_start <  kern_hyp_va(~0UL) &&
+	    hyp_idmap_start != (unsigned long)__hyp_idmap_text_start) {
 		/*
 		 * The idmap page is intersecting with the VA space,
 		 * it is not safe to continue further.
@@ -1893,6 +1894,7 @@ void kvm_arch_memslots_updated(struct kvm *kvm, struct kvm_memslots *slots)
 
 void kvm_arch_flush_shadow_all(struct kvm *kvm)
 {
+	kvm_free_stage2_pgd(kvm);
 }
 
 void kvm_arch_flush_shadow_memslot(struct kvm *kvm,

arch/arm/mach-exynos/suspend.c

@@ -255,6 +255,12 @@ static int __init exynos_pmu_irq_init(struct device_node *node,
 		return -ENOMEM;
 	}
 
+	/*
+	 * Clear the OF_POPULATED flag set in of_irq_init so that
+	 * later the Exynos PMU platform device won't be skipped.
+	 */
+	of_node_clear_flag(node, OF_POPULATED);
+
 	return 0;
 }
 

arch/arm/mach-imx/mach-imx6ul.c

@@ -64,6 +64,7 @@ static void __init imx6ul_init_machine(void)
 	if (parent == NULL)
 		pr_warn("failed to initialize soc device\n");
 
+	of_platform_default_populate(NULL, NULL, parent);
 	imx6ul_enet_init();
 	imx_anatop_init();
 	imx6ul_pm_init();

arch/arm/mach-imx/pm-imx6.c

@@ -295,7 +295,7 @@ int imx6_set_lpm(enum mxc_cpu_pwr_mode mode)
 		val &= ~BM_CLPCR_SBYOS;
 		if (cpu_is_imx6sl())
 			val |= BM_CLPCR_BYPASS_PMIC_READY;
-		if (cpu_is_imx6sl() || cpu_is_imx6sx())
+		if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul())
 			val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
 		else
 			val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
@@ -310,7 +310,7 @@ int imx6_set_lpm(enum mxc_cpu_pwr_mode mode)
 		val |= 0x3 << BP_CLPCR_STBY_COUNT;
 		val |= BM_CLPCR_VSTBY;
 		val |= BM_CLPCR_SBYOS;
-		if (cpu_is_imx6sl())
+		if (cpu_is_imx6sl() || cpu_is_imx6sx())
 			val |= BM_CLPCR_BYPASS_PMIC_READY;
 		if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul())
 			val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;

arch/arm/mach-omap2/cm33xx.c

@@ -220,9 +220,6 @@ static int am33xx_cm_wait_module_ready(u8 part, s16 inst, u16 clkctrl_offs,
 {
 	int i = 0;
 
-	if (!clkctrl_offs)
-		return 0;
-
 	omap_test_timeout(_is_module_ready(inst, clkctrl_offs),
 			  MAX_MODULE_READY_TIME, i);
 
@@ -246,9 +243,6 @@ static int am33xx_cm_wait_module_idle(u8 part, s16 inst, u16 clkctrl_offs,
 {
 	int i = 0;
 
-	if (!clkctrl_offs)
-		return 0;
-
 	omap_test_timeout((_clkctrl_idlest(inst, clkctrl_offs) ==
 				CLKCTRL_IDLEST_DISABLED),
 				MAX_MODULE_READY_TIME, i);

arch/arm/mach-omap2/cminst44xx.c

@@ -278,9 +278,6 @@ static int omap4_cminst_wait_module_ready(u8 part, s16 inst, u16 clkctrl_offs,
 {
 	int i = 0;
 
-	if (!clkctrl_offs)
-		return 0;
-
 	omap_test_timeout(_is_module_ready(part, inst, clkctrl_offs),
 			  MAX_MODULE_READY_TIME, i);
 
@@ -304,9 +301,6 @@ static int omap4_cminst_wait_module_idle(u8 part, s16 inst, u16 clkctrl_offs,
 {
 	int i = 0;
 
-	if (!clkctrl_offs)
-		return 0;
-
 	omap_test_timeout((_clkctrl_idlest(part, inst, clkctrl_offs) ==
 			   CLKCTRL_IDLEST_DISABLED),
 			  MAX_MODULE_DISABLE_TIME, i);

arch/arm/mach-omap2/omap_hwmod.c

@@ -1053,6 +1053,10 @@ static int _omap4_wait_target_disable(struct omap_hwmod *oh)
 	if (oh->flags & HWMOD_NO_IDLEST)
 		return 0;
 
+	if (!oh->prcm.omap4.clkctrl_offs &&
+	    !(oh->prcm.omap4.flags & HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET))
+		return 0;
+
 	return omap_cm_wait_module_idle(oh->clkdm->prcm_partition,
 					oh->clkdm->cm_inst,
 					oh->prcm.omap4.clkctrl_offs, 0);
@@ -2971,6 +2975,10 @@ static int _omap4_wait_target_ready(struct omap_hwmod *oh)
 	if (!_find_mpu_rt_port(oh))
 		return 0;
 
+	if (!oh->prcm.omap4.clkctrl_offs &&
+	    !(oh->prcm.omap4.flags & HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET))
+		return 0;
+
 	/* XXX check module SIDLEMODE, hardreset status */
 
 	return omap_cm_wait_module_ready(oh->clkdm->prcm_partition,

arch/arm/mach-omap2/omap_hwmod.h

@@ -443,8 +443,12 @@ struct omap_hwmod_omap2_prcm {
  * HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT: Some IP blocks don't have a PRCM
  *     module-level context loss register associated with them; this
  *     flag bit should be set in those cases
+ * HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET: Some IP blocks have a valid CLKCTRL
+ *	offset of zero; this flag bit should be set in those cases to
+ *	distinguish from hwmods that have no clkctrl offset.
  */
 #define HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT		(1 << 0)
+#define HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET		(1 << 1)
 
 /**
  * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data

arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c

@@ -29,6 +29,7 @@
 #define CLKCTRL(oh, clkctrl) ((oh).prcm.omap4.clkctrl_offs = (clkctrl))
 #define RSTCTRL(oh, rstctrl) ((oh).prcm.omap4.rstctrl_offs = (rstctrl))
 #define RSTST(oh, rstst) ((oh).prcm.omap4.rstst_offs = (rstst))
+#define PRCM_FLAGS(oh, flag) ((oh).prcm.omap4.flags = (flag))
 
 /*
  * 'l3' class
@@ -1296,6 +1297,7 @@ static void omap_hwmod_am33xx_clkctrl(void)
 	CLKCTRL(am33xx_i2c1_hwmod, AM33XX_CM_WKUP_I2C0_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_wd_timer1_hwmod, AM33XX_CM_WKUP_WDT1_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_rtc_hwmod, AM33XX_CM_RTC_RTC_CLKCTRL_OFFSET);
+	PRCM_FLAGS(am33xx_rtc_hwmod, HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_mmc2_hwmod, AM33XX_CM_PER_MMC2_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_gpmc_hwmod, AM33XX_CM_PER_GPMC_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_l4_ls_hwmod, AM33XX_CM_PER_L4LS_CLKCTRL_OFFSET);

arch/arm/mach-omap2/omap_hwmod_3xxx_data.c

@@ -722,8 +722,20 @@ static struct omap_hwmod omap3xxx_dss_dispc_hwmod = {
  * display serial interface controller
  */
 
+static struct omap_hwmod_class_sysconfig omap3xxx_dsi_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
+			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
 static struct omap_hwmod_class omap3xxx_dsi_hwmod_class = {
 	.name = "dsi",
+	.sysc	= &omap3xxx_dsi_sysc,
 };
 
 static struct omap_hwmod_irq_info omap3xxx_dsi1_irqs[] = {

arch/arm/mach-pxa/lubbock.c

@@ -137,6 +137,18 @@ static struct pxa2xx_udc_mach_info udc_info __initdata = {
 	// no D+ pullup; lubbock can't connect/disconnect in software
 };
 
+static void lubbock_init_pcmcia(void)
+{
+	struct clk *clk;
+
+	/* Add an alias for the SA1111 PCMCIA clock */
+	clk = clk_get_sys("pxa2xx-pcmcia", NULL);
+	if (!IS_ERR(clk)) {
+		clkdev_create(clk, NULL, "1800");
+		clk_put(clk);
+	}
+}
+
 static struct resource sa1111_resources[] = {
 	[0] = {
 		.start	= 0x10000000,
@@ -467,6 +479,8 @@ static void __init lubbock_init(void)
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
 
+	lubbock_init_pcmcia();
+
 	clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL);
 	pxa_set_udc_info(&udc_info);
 	pxa_set_fb_info(NULL, &sharp_lm8v31);

arch/arm/mach-sa1100/clock.c

@@ -125,6 +125,8 @@ static unsigned long clk_36864_get_rate(struct clk *clk)
 }
 
 static struct clkops clk_36864_ops = {
+	.enable		= clk_cpu_enable,
+	.disable	= clk_cpu_disable,
 	.get_rate	= clk_36864_get_rate,
 };
 
@@ -140,9 +142,8 @@ static struct clk_lookup sa11xx_clkregs[] = {
 	CLKDEV_INIT(NULL, "OSTIMER0", &clk_36864),
 };
 
-static int __init sa11xx_clk_init(void)
+int __init sa11xx_clk_init(void)
 {
 	clkdev_add_table(sa11xx_clkregs, ARRAY_SIZE(sa11xx_clkregs));
 	return 0;
 }
-core_initcall(sa11xx_clk_init);

arch/arm/mach-sa1100/generic.c

@@ -34,6 +34,7 @@
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
+#include <mach/reset.h>
 
 #include "generic.h"
 #include <clocksource/pxa.h>
@@ -95,6 +96,8 @@ static void sa1100_power_off(void)
 
 void sa11x0_restart(enum reboot_mode mode, const char *cmd)
 {
+	clear_reset_status(RESET_STATUS_ALL);
+
 	if (mode == REBOOT_SOFT) {
 		/* Jump into ROM at address 0 */
 		soft_restart(0);
@@ -388,6 +391,7 @@ void __init sa1100_init_irq(void)
 	sa11x0_init_irq_nodt(IRQ_GPIO0_SC, irq_resource.start);
 
 	sa1100_init_gpio();
+	sa11xx_clk_init();
 }
 
 /*

arch/arm/mach-sa1100/generic.h

@@ -44,3 +44,5 @@ int sa11x0_pm_init(void);
 #else
 static inline int sa11x0_pm_init(void) { return 0; }
 #endif
+
+int sa11xx_clk_init(void);

arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c

@@ -41,39 +41,26 @@
 
 #define REGULATOR_IRQ_MASK	BIT(2)	/* IRQ2, active low */
 
-static void __iomem *irqc;
-
-static const u8 da9063_mask_regs[] = {
-	DA9063_REG_IRQ_MASK_A,
-	DA9063_REG_IRQ_MASK_B,
-	DA9063_REG_IRQ_MASK_C,
-	DA9063_REG_IRQ_MASK_D,
-};
-
-/* DA9210 System Control and Event Registers */
+/* start of DA9210 System Control and Event Registers */
 #define DA9210_REG_MASK_A		0x54
-#define DA9210_REG_MASK_B		0x55
-
-static const u8 da9210_mask_regs[] = {
-	DA9210_REG_MASK_A,
-	DA9210_REG_MASK_B,
-};
-
-static void da9xxx_mask_irqs(struct i2c_client *client, const u8 regs[],
-			     unsigned int nregs)
-{
-	unsigned int i;
 
-	dev_info(&client->dev, "Masking %s interrupt sources\n", client->name);
+static void __iomem *irqc;
 
-	for (i = 0; i < nregs; i++) {
-		int error = i2c_smbus_write_byte_data(client, regs[i], ~0);
-		if (error) {
-			dev_err(&client->dev, "i2c error %d\n", error);
-			return;
-		}
-	}
-}
+/* first byte sets the memory pointer, following are consecutive reg values */
+static u8 da9063_irq_clr[] = { DA9063_REG_IRQ_MASK_A, 0xff, 0xff, 0xff, 0xff };
+static u8 da9210_irq_clr[] = { DA9210_REG_MASK_A, 0xff, 0xff };
+
+static struct i2c_msg da9xxx_msgs[2] = {
+	{
+		.addr = 0x58,
+		.len = ARRAY_SIZE(da9063_irq_clr),
+		.buf = da9063_irq_clr,
+	}, {
+		.addr = 0x68,
+		.len = ARRAY_SIZE(da9210_irq_clr),
+		.buf = da9210_irq_clr,
+	},
+};
 
 static int regulator_quirk_notify(struct notifier_block *nb,
 				  unsigned long action, void *data)
@@ -93,12 +80,15 @@ static int regulator_quirk_notify(struct notifier_block *nb,
 	client = to_i2c_client(dev);
 	dev_dbg(dev, "Detected %s\n", client->name);
 
-	if ((client->addr == 0x58 && !strcmp(client->name, "da9063")))
-		da9xxx_mask_irqs(client, da9063_mask_regs,
-				 ARRAY_SIZE(da9063_mask_regs));
-	else if (client->addr == 0x68 && !strcmp(client->name, "da9210"))
-		da9xxx_mask_irqs(client, da9210_mask_regs,
-				 ARRAY_SIZE(da9210_mask_regs));
+	if ((client->addr == 0x58 && !strcmp(client->name, "da9063")) ||
+	    (client->addr == 0x68 && !strcmp(client->name, "da9210"))) {
+		int ret;
+
+		dev_info(&client->dev, "clearing da9063/da9210 interrupts\n");
+		ret = i2c_transfer(client->adapter, da9xxx_msgs, ARRAY_SIZE(da9xxx_msgs));
+		if (ret != ARRAY_SIZE(da9xxx_msgs))
+			dev_err(&client->dev, "i2c error %d\n", ret);
+	}
 
 	mon = ioread32(irqc + IRQC_MONITOR);
 	if (mon & REGULATOR_IRQ_MASK)

arch/arm/mm/mmu.c

@@ -137,7 +137,7 @@ void __init init_default_cache_policy(unsigned long pmd)
 
 	initial_pmd_value = pmd;
 
-	pmd &= PMD_SECT_TEX(1) | PMD_SECT_BUFFERABLE | PMD_SECT_CACHEABLE;
+	pmd &= PMD_SECT_CACHE_MASK;
 
 	for (i = 0; i < ARRAY_SIZE(cache_policies); i++)
 		if (cache_policies[i].pmd == pmd) {

arch/arm/mm/proc-v7.S

@@ -16,6 +16,7 @@
 #include <asm/hwcap.h>
 #include <asm/pgtable-hwdef.h>
 #include <asm/pgtable.h>
+#include <asm/memory.h>
 
 #include "proc-macros.S"
 

arch/arm/xen/enlighten.c

@@ -170,9 +170,6 @@ static int xen_starting_cpu(unsigned int cpu)
 	pr_info("Xen: initializing cpu%d\n", cpu);
 	vcpup = per_cpu_ptr(xen_vcpu_info, cpu);
 
-	/* Direct vCPU id mapping for ARM guests. */
-	per_cpu(xen_vcpu_id, cpu) = cpu;
-
 	info.mfn = virt_to_gfn(vcpup);
 	info.offset = xen_offset_in_page(vcpup);
 
@@ -330,6 +327,7 @@ static int __init xen_guest_init(void)
 {
 	struct xen_add_to_physmap xatp;
 	struct shared_info *shared_info_page = NULL;
+	int cpu;
 
 	if (!xen_domain())
 		return 0;
@@ -380,7 +378,8 @@ static int __init xen_guest_init(void)
 		return -ENOMEM;
 
 	/* Direct vCPU id mapping for ARM guests. */
-	per_cpu(xen_vcpu_id, 0) = 0;
+	for_each_possible_cpu(cpu)
+		per_cpu(xen_vcpu_id, cpu) = cpu;
 
 	xen_auto_xlat_grant_frames.count = gnttab_max_grant_frames();
 	if (xen_xlate_map_ballooned_pages(&xen_auto_xlat_grant_frames.pfn,

arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi

@@ -255,10 +255,10 @@
 		/* Local timer */
 		timer {
 			compatible = "arm,armv8-timer";
-			interrupts = <1 13 0xf01>,
-				     <1 14 0xf01>,
-				     <1 11 0xf01>,
-				     <1 10 0xf01>;
+			interrupts = <1 13 0xf08>,
+				     <1 14 0xf08>,
+				     <1 11 0xf08>,
+				     <1 10 0xf08>;
 		};
 
 		timer0: timer0@ffc03000 {

arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi

@@ -102,13 +102,13 @@
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13
-			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>,
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 14
-			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>,
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 11
-			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>,
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 10
-			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>;
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
 	xtal: xtal-clk {

arch/arm64/boot/dts/apm/apm-storm.dtsi

@@ -110,10 +110,10 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <1 0 0xff01>,	/* Secure Phys IRQ */
-			     <1 13 0xff01>,	/* Non-secure Phys IRQ */
-			     <1 14 0xff01>,	/* Virt IRQ */
-			     <1 15 0xff01>;	/* Hyp IRQ */
+		interrupts = <1 0 0xff08>,	/* Secure Phys IRQ */
+			     <1 13 0xff08>,	/* Non-secure Phys IRQ */
+			     <1 14 0xff08>,	/* Virt IRQ */
+			     <1 15 0xff08>;	/* Hyp IRQ */
 		clock-frequency = <50000000>;
 	};
 

arch/arm64/boot/dts/broadcom/bcm2835-rpi.dtsi

+../../../../arm/boot/dts/bcm2835-rpi.dtsi
\ No newline at end of file

arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts

 /dts-v1/;
 #include "bcm2837.dtsi"
-#include "../../../../arm/boot/dts/bcm2835-rpi.dtsi"
-#include "../../../../arm/boot/dts/bcm283x-rpi-smsc9514.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm283x-rpi-smsc9514.dtsi"
 
 / {
 	compatible = "raspberrypi,3-model-b", "brcm,bcm2837";

arch/arm64/boot/dts/broadcom/bcm2837.dtsi

-#include "../../../../arm/boot/dts/bcm283x.dtsi"
+#include "bcm283x.dtsi"
 
 / {
 	compatible = "brcm,bcm2836";

arch/arm64/boot/dts/broadcom/bcm283x-rpi-smsc9514.dtsi

+../../../../arm/boot/dts/bcm283x-rpi-smsc9514.dtsi
\ No newline at end of file

arch/arm64/boot/dts/broadcom/bcm283x.dtsi

+../../../../arm/boot/dts/bcm283x.dtsi
\ No newline at end of file

arch/arm64/boot/dts/broadcom/ns2.dtsi

@@ -88,13 +88,13 @@
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0xff) |
-			      IRQ_TYPE_EDGE_RISING)>,
+			      IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(0xff) |
-			      IRQ_TYPE_EDGE_RISING)>,
+			      IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(0xff) |
-			      IRQ_TYPE_EDGE_RISING)>,
+			      IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(0xff) |
-			      IRQ_TYPE_EDGE_RISING)>;
+			      IRQ_TYPE_LEVEL_LOW)>;
 	};
 
 	pmu {

arch/arm64/boot/dts/cavium/thunder-88xx.dtsi

@@ -354,10 +354,10 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <1 13 0xff01>,
-		             <1 14 0xff01>,
-		             <1 11 0xff01>,
-		             <1 10 0xff01>;
+		interrupts = <1 13 4>,
+		             <1 14 4>,
+		             <1 11 4>,
+		             <1 10 4>;
 	};
 
 	pmu {

arch/arm64/boot/dts/exynos/exynos7.dtsi

@@ -473,10 +473,10 @@
 
 		timer {
 			compatible = "arm,armv8-timer";
-			interrupts = <1 13 0xff01>,
-				     <1 14 0xff01>,
-				     <1 11 0xff01>,
-				     <1 10 0xff01>;
+			interrupts = <1 13 0xff08>,
+				     <1 14 0xff08>,
+				     <1 11 0xff08>,
+				     <1 10 0xff08>;
 		};
 
 		pmu_system_controller: system-controller@105c0000 {

arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi

@@ -119,10 +119,10 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <1 13 0x1>, /* Physical Secure PPI */
-			     <1 14 0x1>, /* Physical Non-Secure PPI */
-			     <1 11 0x1>, /* Virtual PPI */
-			     <1 10 0x1>; /* Hypervisor PPI */
+		interrupts = <1 13 0xf08>, /* Physical Secure PPI */
+			     <1 14 0xf08>, /* Physical Non-Secure PPI */
+			     <1 11 0xf08>, /* Virtual PPI */
+			     <1 10 0xf08>; /* Hypervisor PPI */
 	};
 
 	pmu {

arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi

@@ -191,10 +191,10 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */
-			     <1 14 0x8>, /* Physical Non-Secure PPI, active-low */
-			     <1 11 0x8>, /* Virtual PPI, active-low */
-			     <1 10 0x8>; /* Hypervisor PPI, active-low */
+		interrupts = <1 13 4>, /* Physical Secure PPI, active-low */
+			     <1 14 4>, /* Physical Non-Secure PPI, active-low */
+			     <1 11 4>, /* Virtual PPI, active-low */
+			     <1 10 4>; /* Hypervisor PPI, active-low */
 	};
 
 	pmu {

arch/arm64/boot/dts/marvell/armada-ap806.dtsi

@@ -122,10 +122,10 @@
 
 			timer {
 				compatible = "arm,armv8-timer";
-				interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>,
-					     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>,
-					     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>,
-					     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+				interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+					     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+					     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+					     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 			};
 
 			odmi: odmi@300000 {

arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi

@@ -129,10 +129,10 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <1 13 0xf01>,
-			     <1 14 0xf01>,
-			     <1 11 0xf01>,
-			     <1 10 0xf01>;
+		interrupts = <1 13 4>,
+			     <1 14 4>,
+			     <1 11 4>,
+			     <1 10 4>;
 	};
 
 	soc {

arch/arm64/boot/dts/xilinx/zynqmp.dtsi

@@ -65,10 +65,10 @@
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupt-parent = <&gic>;
-		interrupts = <1 13 0xf01>,
-			     <1 14 0xf01>,
-			     <1 11 0xf01>,
-			     <1 10 0xf01>;
+		interrupts = <1 13 0xf08>,
+			     <1 14 0xf08>,
+			     <1 11 0xf08>,
+			     <1 10 0xf08>;
 	};
 
 	amba_apu {

arch/arm64/crypto/aes-glue.c

@@ -216,7 +216,7 @@ static int ctr_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
 		err = blkcipher_walk_done(desc, &walk,
 					  walk.nbytes % AES_BLOCK_SIZE);
 	}
-	if (nbytes) {
+	if (walk.nbytes % AES_BLOCK_SIZE) {
 		u8 *tdst = walk.dst.virt.addr + blocks * AES_BLOCK_SIZE;
 		u8 *tsrc = walk.src.virt.addr + blocks * AES_BLOCK_SIZE;
 		u8 __aligned(8) tail[AES_BLOCK_SIZE];

arch/arm64/include/asm/percpu.h

@@ -199,19 +199,19 @@ static inline unsigned long __percpu_xchg(void *ptr, unsigned long val,
 #define _percpu_read(pcp)						\
 ({									\
 	typeof(pcp) __retval;						\
-	preempt_disable();						\
+	preempt_disable_notrace();					\
 	__retval = (typeof(pcp))__percpu_read(raw_cpu_ptr(&(pcp)), 	\
 					      sizeof(pcp));		\
-	preempt_enable();						\
+	preempt_enable_notrace();					\
 	__retval;							\
 })
 
 #define _percpu_write(pcp, val)						\
 do {									\
-	preempt_disable();						\
+	preempt_disable_notrace();					\
 	__percpu_write(raw_cpu_ptr(&(pcp)), (unsigned long)(val), 	\
 				sizeof(pcp));				\
-	preempt_enable();						\
+	preempt_enable_notrace();					\
 } while(0)								\
 
 #define _pcp_protect(operation, pcp, val)			\

arch/arm64/include/asm/spinlock.h

@@ -363,4 +363,14 @@ static inline int arch_read_trylock(arch_rwlock_t *rw)
 #define arch_read_relax(lock)	cpu_relax()
 #define arch_write_relax(lock)	cpu_relax()
 
+/*
+ * Accesses appearing in program order before a spin_lock() operation
+ * can be reordered with accesses inside the critical section, by virtue
+ * of arch_spin_lock being constructed using acquire semantics.
+ *
+ * In cases where this is problematic (e.g. try_to_wake_up), an
+ * smp_mb__before_spinlock() can restore the required ordering.
+ */
+#define smp_mb__before_spinlock()	smp_mb()
+
 #endif /* __ASM_SPINLOCK_H */

arch/avr32/include/asm/uaccess.h

@@ -74,7 +74,7 @@ extern __kernel_size_t __copy_user(void *to, const void *from,
 
 extern __kernel_size_t copy_to_user(void __user *to, const void *from,
 				    __kernel_size_t n);
-extern __kernel_size_t copy_from_user(void *to, const void __user *from,
+extern __kernel_size_t ___copy_from_user(void *to, const void __user *from,
 				      __kernel_size_t n);
 
 static inline __kernel_size_t __copy_to_user(void __user *to, const void *from,
@@ -88,6 +88,15 @@ static inline __kernel_size_t __copy_from_user(void *to,
 {
 	return __copy_user(to, (const void __force *)from, n);
 }
+static inline __kernel_size_t copy_from_user(void *to,
+					       const void __user *from,
+					       __kernel_size_t n)
+{
+	size_t res = ___copy_from_user(to, from, n);
+	if (unlikely(res))
+		memset(to + (n - res), 0, res);
+	return res;
+}
 
 #define __copy_to_user_inatomic __copy_to_user
 #define __copy_from_user_inatomic __copy_from_user

arch/avr32/kernel/avr32_ksyms.c

@@ -36,7 +36,7 @@ EXPORT_SYMBOL(copy_page);
 /*
  * Userspace access stuff.
  */
-EXPORT_SYMBOL(copy_from_user);
+EXPORT_SYMBOL(___copy_from_user);
 EXPORT_SYMBOL(copy_to_user);
 EXPORT_SYMBOL(__copy_user);
 EXPORT_SYMBOL(strncpy_from_user);

arch/avr32/lib/copy_user.S

@@ -23,13 +23,13 @@
 	 */
 	.text
 	.align	1
-	.global	copy_from_user
-	.type	copy_from_user, @function
-copy_from_user:
+	.global	___copy_from_user
+	.type	___copy_from_user, @function
+___copy_from_user:
 	branch_if_kernel r8, __copy_user
 	ret_if_privileged r8, r11, r10, r10
 	rjmp	__copy_user
-	.size	copy_from_user, . - copy_from_user
+	.size	___copy_from_user, . - ___copy_from_user
 
 	.global	copy_to_user
 	.type	copy_to_user, @function

arch/blackfin/include/asm/uaccess.h

@@ -171,11 +171,12 @@ static inline int bad_user_access_length(void)
 static inline unsigned long __must_check
 copy_from_user(void *to, const void __user *from, unsigned long n)
 {
-	if (access_ok(VERIFY_READ, from, n))
+	if (likely(access_ok(VERIFY_READ, from, n))) {
 		memcpy(to, (const void __force *)from, n);
-	else
-		return n;
-	return 0;
+		return 0;
+	}
+	memset(to, 0, n);
+	return n;
 }
 
 static inline unsigned long __must_check

arch/cris/include/asm/uaccess.h

@@ -194,30 +194,6 @@ extern unsigned long __copy_user(void __user *to, const void *from, unsigned lon
 extern unsigned long __copy_user_zeroing(void *to, const void __user *from, unsigned long n);
 extern unsigned long __do_clear_user(void __user *to, unsigned long n);
 
-static inline unsigned long
-__generic_copy_to_user(void __user *to, const void *from, unsigned long n)
-{
-	if (access_ok(VERIFY_WRITE, to, n))
-		return __copy_user(to, from, n);
-	return n;
-}
-
-static inline unsigned long
-__generic_copy_from_user(void *to, const void __user *from, unsigned long n)
-{
-	if (access_ok(VERIFY_READ, from, n))
-		return __copy_user_zeroing(to, from, n);
-	return n;
-}
-
-static inline unsigned long
-__generic_clear_user(void __user *to, unsigned long n)
-{
-	if (access_ok(VERIFY_WRITE, to, n))
-		return __do_clear_user(to, n);
-	return n;
-}
-
 static inline long
 __strncpy_from_user(char *dst, const char __user *src, long count)
 {
@@ -282,7 +258,7 @@ __constant_copy_from_user(void *to, const void __user *from, unsigned long n)
 	else if (n == 24)
 		__asm_copy_from_user_24(to, from, ret);
 	else
-		ret = __generic_copy_from_user(to, from, n);
+		ret = __copy_user_zeroing(to, from, n);
 
 	return ret;
 }
@@ -333,7 +309,7 @@ __constant_copy_to_user(void __user *to, const void *from, unsigned long n)
 	else if (n == 24)
 		__asm_copy_to_user_24(to, from, ret);
 	else
-		ret = __generic_copy_to_user(to, from, n);
+		ret = __copy_user(to, from, n);
 
 	return ret;
 }
@@ -366,26 +342,43 @@ __constant_clear_user(void __user *to, unsigned long n)
 	else if (n == 24)
 		__asm_clear_24(to, ret);
 	else
-		ret = __generic_clear_user(to, n);
+		ret = __do_clear_user(to, n);
 
 	return ret;
 }
 
 
-#define clear_user(to, n)				\
-	(__builtin_constant_p(n) ?			\
-	 __constant_clear_user(to, n) :			\
-	 __generic_clear_user(to, n))
+static inline size_t clear_user(void __user *to, size_t n)
+{
+	if (unlikely(!access_ok(VERIFY_WRITE, to, n)))
+		return n;
+	if (__builtin_constant_p(n))
+		return __constant_clear_user(to, n);
+	else
+		return __do_clear_user(to, n);
+}
 
-#define copy_from_user(to, from, n)			\
-	(__builtin_constant_p(n) ?			\
-	 __constant_copy_from_user(to, from, n) :	\
-	 __generic_copy_from_user(to, from, n))
+static inline size_t copy_from_user(void *to, const void __user *from, size_t n)
+{
+	if (unlikely(!access_ok(VERIFY_READ, from, n))) {
+		memset(to, 0, n);
+		return n;
+	}
+	if (__builtin_constant_p(n))
+		return __constant_copy_from_user(to, from, n);
+	else
+		return __copy_user_zeroing(to, from, n);
+}
 
-#define copy_to_user(to, from, n)			\
-	(__builtin_constant_p(n) ?			\
-	 __constant_copy_to_user(to, from, n) :		\
-	 __generic_copy_to_user(to, from, n))
+static inline size_t copy_to_user(void __user *to, const void *from, size_t n)
+{
+	if (unlikely(!access_ok(VERIFY_WRITE, to, n)))
+		return n;
+	if (__builtin_constant_p(n))
+		return __constant_copy_to_user(to, from, n);
+	else
+		return __copy_user(to, from, n);
+}
 
 /* We let the __ versions of copy_from/to_user inline, because they're often
  * used in fast paths and have only a small space overhead.

arch/frv/include/asm/uaccess.h

@@ -263,19 +263,25 @@ do {							\
 extern long __memset_user(void *dst, unsigned long count);
 extern long __memcpy_user(void *dst, const void *src, unsigned long count);
 
-#define clear_user(dst,count)			__memset_user(____force(dst), (count))
+#define __clear_user(dst,count)			__memset_user(____force(dst), (count))
 #define __copy_from_user_inatomic(to, from, n)	__memcpy_user((to), ____force(from), (n))
 #define __copy_to_user_inatomic(to, from, n)	__memcpy_user(____force(to), (from), (n))
 
 #else
 
-#define clear_user(dst,count)			(memset(____force(dst), 0, (count)), 0)
+#define __clear_user(dst,count)			(memset(____force(dst), 0, (count)), 0)
 #define __copy_from_user_inatomic(to, from, n)	(memcpy((to), ____force(from), (n)), 0)
 #define __copy_to_user_inatomic(to, from, n)	(memcpy(____force(to), (from), (n)), 0)
 
 #endif
 
-#define __clear_user clear_user
+static inline unsigned long __must_check
+clear_user(void __user *to, unsigned long n)
+{
+	if (likely(__access_ok(to, n)))
+		n = __clear_user(to, n);
+	return n;
+}
 
 static inline unsigned long __must_check
 __copy_to_user(void __user *to, const void *from, unsigned long n)

arch/hexagon/include/asm/uaccess.h

@@ -103,7 +103,8 @@ static inline long hexagon_strncpy_from_user(char *dst, const char __user *src,
 {
 	long res = __strnlen_user(src, n);
 
-	/* return from strnlen can't be zero -- that would be rubbish. */
+	if (unlikely(!res))
+		return -EFAULT;
 
 	if (res > n) {
 		copy_from_user(dst, src, n);

arch/ia64/include/asm/uaccess.h

@@ -269,19 +269,16 @@ __copy_from_user (void *to, const void __user *from, unsigned long count)
 	__cu_len;									\
 })
 
-#define copy_from_user(to, from, n)							\
-({											\
-	void *__cu_to = (to);								\
-	const void __user *__cu_from = (from);						\
-	long __cu_len = (n);								\
-											\
-	__chk_user_ptr(__cu_from);							\
-	if (__access_ok(__cu_from, __cu_len, get_fs())) {				\
-		check_object_size(__cu_to, __cu_len, false);			\
-		__cu_len = __copy_user((__force void __user *) __cu_to, __cu_from, __cu_len);	\
-	}										\
-	__cu_len;									\
-})
+static inline unsigned long
+copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+	check_object_size(to, n, false);
+	if (likely(__access_ok(from, n, get_fs())))
+		n = __copy_user((__force void __user *) to, from, n);
+	else
+		memset(to, 0, n);
+	return n;
+}
 
 #define __copy_in_user(to, from, size)	__copy_user((to), (from), (size))
 

arch/m32r/include/asm/uaccess.h

@@ -219,7 +219,7 @@ extern int fixup_exception(struct pt_regs *regs);
 #define __get_user_nocheck(x, ptr, size)				\
 ({									\
 	long __gu_err = 0;						\
-	unsigned long __gu_val;						\
+	unsigned long __gu_val = 0;					\
 	might_fault();							\
 	__get_user_size(__gu_val, (ptr), (size), __gu_err);		\
 	(x) = (__force __typeof__(*(ptr)))__gu_val;			\

arch/metag/include/asm/uaccess.h

@@ -204,8 +204,9 @@ extern unsigned long __must_check __copy_user_zeroing(void *to,
 static inline unsigned long
 copy_from_user(void *to, const void __user *from, unsigned long n)
 {
-	if (access_ok(VERIFY_READ, from, n))
+	if (likely(access_ok(VERIFY_READ, from, n)))
 		return __copy_user_zeroing(to, from, n);
+	memset(to, 0, n);
 	return n;
 }
 

arch/microblaze/include/asm/uaccess.h

@@ -227,7 +227,7 @@ extern long __user_bad(void);
 
 #define __get_user(x, ptr)						\
 ({									\
-	unsigned long __gu_val;						\
+	unsigned long __gu_val = 0;					\
 	/*unsigned long __gu_ptr = (unsigned long)(ptr);*/		\
 	long __gu_err;							\
 	switch (sizeof(*(ptr))) {					\
@@ -373,10 +373,13 @@ extern long __user_bad(void);
 static inline long copy_from_user(void *to,
 		const void __user *from, unsigned long n)
 {
+	unsigned long res = n;
 	might_fault();
-	if (access_ok(VERIFY_READ, from, n))
-		return __copy_from_user(to, from, n);
-	return n;
+	if (likely(access_ok(VERIFY_READ, from, n)))
+		res = __copy_from_user(to, from, n);
+	if (unlikely(res))
+		memset(to + (n - res), 0, res);
+	return res;
 }
 
 #define __copy_to_user(to, from, n)	\

arch/mips/include/asm/uaccess.h

@@ -14,6 +14,7 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/thread_info.h>
+#include <linux/string.h>
 #include <asm/asm-eva.h>
 
 /*
@@ -1170,6 +1171,8 @@ extern size_t __copy_in_user_eva(void *__to, const void *__from, size_t __n);
 			__cu_len = __invoke_copy_from_user(__cu_to,	\
 							   __cu_from,	\
 							   __cu_len);   \
+		} else {						\
+			memset(__cu_to, 0, __cu_len);			\
 		}							\
 	}								\
 	__cu_len;							\

arch/mn10300/include/asm/uaccess.h

@@ -166,6 +166,7 @@ struct __large_struct { unsigned long buf[100]; };
 		"2:\n"						\
 		"	.section	.fixup,\"ax\"\n"	\
 		"3:\n\t"					\
+		"	mov		0,%1\n"			\
 		"	mov		%3,%0\n"		\
 		"	jmp		2b\n"			\
 		"	.previous\n"				\

arch/mn10300/lib/usercopy.c

@@ -9,7 +9,7 @@
  * as published by the Free Software Foundation; either version
  * 2 of the Licence, or (at your option) any later version.
  */
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 
 unsigned long
 __generic_copy_to_user(void *to, const void *from, unsigned long n)
@@ -24,6 +24,8 @@ __generic_copy_from_user(void *to, const void *from, unsigned long n)
 {
 	if (access_ok(VERIFY_READ, from, n))
 		__copy_user_zeroing(to, from, n);
+	else
+		memset(to, 0, n);
 	return n;
 }
 

arch/nios2/include/asm/uaccess.h

@@ -102,9 +102,12 @@ extern long __copy_to_user(void __user *to, const void *from, unsigned long n);
 static inline long copy_from_user(void *to, const void __user *from,
 				unsigned long n)
 {
-	if (!access_ok(VERIFY_READ, from, n))
-		return n;
-	return __copy_from_user(to, from, n);
+	unsigned long res = n;
+	if (access_ok(VERIFY_READ, from, n))
+		res = __copy_from_user(to, from, n);
+	if (unlikely(res))
+		memset(to + (n - res), 0, res);
+	return res;
 }
 
 static inline long copy_to_user(void __user *to, const void *from,
@@ -139,7 +142,7 @@ extern long strnlen_user(const char __user *s, long n);
 
 #define __get_user_unknown(val, size, ptr, err) do {			\
 	err = 0;							\
-	if (copy_from_user(&(val), ptr, size)) {			\
+	if (__copy_from_user(&(val), ptr, size)) {			\
 		err = -EFAULT;						\
 	}								\
 	} while (0)
@@ -166,7 +169,7 @@ do {									\
 	({								\
 	long __gu_err = -EFAULT;					\
 	const __typeof__(*(ptr)) __user *__gu_ptr = (ptr);		\
-	unsigned long __gu_val;						\
+	unsigned long __gu_val = 0;					\
 	__get_user_common(__gu_val, sizeof(*(ptr)), __gu_ptr, __gu_err);\
 	(x) = (__force __typeof__(x))__gu_val;				\
 	__gu_err;							\

arch/openrisc/include/asm/uaccess.h

@@ -273,28 +273,20 @@ __copy_tofrom_user(void *to, const void *from, unsigned long size);
 static inline unsigned long
 copy_from_user(void *to, const void *from, unsigned long n)
 {
-	unsigned long over;
-
-	if (access_ok(VERIFY_READ, from, n))
-		return __copy_tofrom_user(to, from, n);
-	if ((unsigned long)from < TASK_SIZE) {
-		over = (unsigned long)from + n - TASK_SIZE;
-		return __copy_tofrom_user(to, from, n - over) + over;
-	}
-	return n;
+	unsigned long res = n;
+
+	if (likely(access_ok(VERIFY_READ, from, n)))
+		res = __copy_tofrom_user(to, from, n);
+	if (unlikely(res))
+		memset(to + (n - res), 0, res);
+	return res;
 }
 
 static inline unsigned long
 copy_to_user(void *to, const void *from, unsigned long n)
 {
-	unsigned long over;
-
-	if (access_ok(VERIFY_WRITE, to, n))
-		return __copy_tofrom_user(to, from, n);
-	if ((unsigned long)to < TASK_SIZE) {
-		over = (unsigned long)to + n - TASK_SIZE;
-		return __copy_tofrom_user(to, from, n - over) + over;
-	}
+	if (likely(access_ok(VERIFY_WRITE, to, n)))
+		n = __copy_tofrom_user(to, from, n);
 	return n;
 }
 
@@ -303,13 +295,8 @@ extern unsigned long __clear_user(void *addr, unsigned long size);
 static inline __must_check unsigned long
 clear_user(void *addr, unsigned long size)
 {
-
-	if (access_ok(VERIFY_WRITE, addr, size))
-		return __clear_user(addr, size);
-	if ((unsigned long)addr < TASK_SIZE) {
-		unsigned long over = (unsigned long)addr + size - TASK_SIZE;
-		return __clear_user(addr, size - over) + over;
-	}
+	if (likely(access_ok(VERIFY_WRITE, addr, size)))
+		size = __clear_user(addr, size);
 	return size;
 }
 

arch/parisc/include/asm/uaccess.h

@@ -10,6 +10,7 @@
 #include <asm-generic/uaccess-unaligned.h>
 
 #include <linux/bug.h>
+#include <linux/string.h>
 
 #define VERIFY_READ 0
 #define VERIFY_WRITE 1
@@ -221,7 +222,7 @@ static inline unsigned long __must_check copy_from_user(void *to,
                                           unsigned long n)
 {
         int sz = __compiletime_object_size(to);
-        int ret = -EFAULT;
+        unsigned long ret = n;
 
         if (likely(sz == -1 || sz >= n))
                 ret = __copy_from_user(to, from, n);
@@ -230,6 +231,8 @@ static inline unsigned long __must_check copy_from_user(void *to,
 	else
                 __bad_copy_user();
 
+	if (unlikely(ret))
+		memset(to + (n - ret), 0, ret);
         return ret;
 }
 

arch/powerpc/include/asm/cpu_has_feature.h

@@ -15,7 +15,7 @@ static inline bool early_cpu_has_feature(unsigned long feature)
 #ifdef CONFIG_JUMP_LABEL_FEATURE_CHECKS
 #include <linux/jump_label.h>
 
-#define NUM_CPU_FTR_KEYS	64
+#define NUM_CPU_FTR_KEYS	BITS_PER_LONG
 
 extern struct static_key_true cpu_feature_keys[NUM_CPU_FTR_KEYS];
 

arch/powerpc/include/asm/uaccess.h

@@ -308,36 +308,21 @@ extern unsigned long __copy_tofrom_user(void __user *to,
 static inline unsigned long copy_from_user(void *to,
 		const void __user *from, unsigned long n)
 {
-	unsigned long over;
-
-	if (access_ok(VERIFY_READ, from, n)) {
+	if (likely(access_ok(VERIFY_READ, from, n))) {
 		check_object_size(to, n, false);
 		return __copy_tofrom_user((__force void __user *)to, from, n);
 	}
-	if ((unsigned long)from < TASK_SIZE) {
-		over = (unsigned long)from + n - TASK_SIZE;
-		check_object_size(to, n - over, false);
-		return __copy_tofrom_user((__force void __user *)to, from,
-				n - over) + over;
-	}
+	memset(to, 0, n);
 	return n;
 }
 
 static inline unsigned long copy_to_user(void __user *to,
 		const void *from, unsigned long n)
 {
-	unsigned long over;
-
 	if (access_ok(VERIFY_WRITE, to, n)) {
 		check_object_size(from, n, true);
 		return __copy_tofrom_user(to, (__force void __user *)from, n);
 	}
-	if ((unsigned long)to < TASK_SIZE) {
-		over = (unsigned long)to + n - TASK_SIZE;
-		check_object_size(from, n - over, true);
-		return __copy_tofrom_user(to, (__force void __user *)from,
-				n - over) + over;
-	}
 	return n;
 }
 
@@ -434,10 +419,6 @@ static inline unsigned long clear_user(void __user *addr, unsigned long size)
 	might_fault();
 	if (likely(access_ok(VERIFY_WRITE, addr, size)))
 		return __clear_user(addr, size);
-	if ((unsigned long)addr < TASK_SIZE) {
-		unsigned long over = (unsigned long)addr + size - TASK_SIZE;
-		return __clear_user(addr, size - over) + over;
-	}
 	return size;
 }
 

arch/powerpc/kernel/idle_book3s.S

@@ -411,7 +411,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
  *
  * r13 - PACA
  * cr3 - gt if waking up with partial/complete hypervisor state loss
- * cr4 - eq if waking up from complete hypervisor state loss.
+ * cr4 - gt or eq if waking up from complete hypervisor state loss.
  */
 _GLOBAL(pnv_wakeup_tb_loss)
 	ld	r1,PACAR1(r13)
@@ -453,7 +453,7 @@ lwarx_loop2:
 	 * At this stage
 	 * cr2 - eq if first thread to wakeup in core
 	 * cr3-  gt if waking up with partial/complete hypervisor state loss
-	 * cr4 - eq if waking up from complete hypervisor state loss.
+	 * cr4 - gt or eq if waking up from complete hypervisor state loss.
 	 */
 
 	ori	r15,r15,PNV_CORE_IDLE_LOCK_BIT
@@ -481,7 +481,7 @@ first_thread_in_subcore:
 	 * If waking up from sleep, subcore state is not lost. Hence
 	 * skip subcore state restore
 	 */
-	bne	cr4,subcore_state_restored
+	blt	cr4,subcore_state_restored
 
 	/* Restore per-subcore state */
 	ld      r4,_SDR1(r1)
@@ -526,7 +526,7 @@ timebase_resync:
 	 * If waking up from sleep, per core state is not lost, skip to
 	 * clear_lock.
 	 */
-	bne	cr4,clear_lock
+	blt	cr4,clear_lock
 
 	/*
 	 * First thread in the core to wake up and its waking up with
@@ -557,7 +557,7 @@ common_exit:
 	 * If waking up from sleep, hypervisor state is not lost. Hence
 	 * skip hypervisor state restore.
 	 */
-	bne	cr4,hypervisor_state_restored
+	blt	cr4,hypervisor_state_restored
 
 	/* Waking up from winkle */