revert "x86, serial: convert legacy COM ports to platform devices"

Revert 7e92b4fc.  It broke Sébastien Dugué's
machine and Jeff said (persuasively)

  This seems like it will break decades-long-working stuff, in favor of
  breaking new ground in our favorite area, "trusting the BIOS."

  It's just not worth it for serial ports, IMO.  Serial ports are something
  that just shouldn't break at this late stage in the game.  My new Intel
  platform boxes don't even have serial ports, so I question the value of
  messing with serial port probing even more...  because...  just wait a year,
  and your box won't have a serial port either!  :)

  I certainly don't object to the use of platform devices (or isa_driver),
  but the probe change seems questionable.  That's sorta analagous to
  rewriting the floppy driver probe routine.  Sure you could do it...  but why
  risk all that damage and go through debugging all over again?

  It seems clear from this report that we cannot, should not, trust BIOS for
  something (a) so simple and (b) that has been working for over a decade.

Much discussion ensued and we've decided to have another go at all of this.

Cc: Sébastien Dugué <sebastien.dugue@bull.net>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Jeff Garzik <jeff@garzik.org>
Acked-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
Cc: Sascha Sommer <saschasommer@freenet.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Documentation/kernel-parameters.txt

@@ -864,11 +864,6 @@ and is between 256 and 4096 characters. It is defined in the file
 	lasi=		[HW,SCSI] PARISC LASI driver for the 53c700 chip
 			Format: addr:<io>,irq:<irq>
 
-	legacy_serial.force [HW,X86-32,X86-64]
-			Probe for COM ports at legacy addresses even
-			if PNPBIOS or ACPI should describe them.  This
-			is for working around firmware defects.
-
 	load_ramdisk=	[RAM] List of ramdisks to load from floppy
 			See Documentation/ramdisk.txt.
 

arch/i386/kernel/Makefile

@@ -35,7 +35,6 @@ obj-y				+= sysenter.o vsyscall.o
 obj-$(CONFIG_ACPI_SRAT) 	+= srat.o
 obj-$(CONFIG_EFI) 		+= efi.o efi_stub.o
 obj-$(CONFIG_DOUBLEFAULT) 	+= doublefault.o
-obj-$(CONFIG_SERIAL_8250)	+= legacy_serial.o
 obj-$(CONFIG_VM86)		+= vm86.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 obj-$(CONFIG_HPET_TIMER) 	+= hpet.o

arch/i386/kernel/legacy_serial.c

-/*
- * Legacy COM port devices for x86 platforms without PNPBIOS or ACPI.
- * Data taken from include/asm-i386/serial.h.
- *
- * (c) Copyright 2007 Hewlett-Packard Development Company, L.P.
- *	Bjorn Helgaas <bjorn.helgaas@hp.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/pnp.h>
-#include <linux/serial_8250.h>
-
-/* Standard COM flags (except for COM4, because of the 8514 problem) */
-#ifdef CONFIG_SERIAL_DETECT_IRQ
-#define COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ)
-#define COM4_FLAGS (UPF_BOOT_AUTOCONF | UPF_AUTO_IRQ)
-#else
-#define COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST)
-#define COM4_FLAGS UPF_BOOT_AUTOCONF
-#endif
-
-#define PORT(_base,_irq,_flags)				\
-	{						\
-		.iobase		= _base,		\
-		.irq		= _irq,			\
-		.uartclk	= 1843200,		\
-		.iotype		= UPIO_PORT,		\
-		.flags		= _flags,		\
-	}
-
-static struct plat_serial8250_port x86_com_data[] = {
-	PORT(0x3F8, 4, COM_FLAGS),
-	PORT(0x2F8, 3, COM_FLAGS),
-	PORT(0x3E8, 4, COM_FLAGS),
-	PORT(0x2E8, 3, COM4_FLAGS),
-	{ },
-};
-
-static struct platform_device x86_com_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= x86_com_data,
-	},
-};
-
-static int force_legacy_probe;
-module_param_named(force, force_legacy_probe, bool, 0);
-MODULE_PARM_DESC(force, "Force legacy serial port probe");
-
-static int __init serial8250_x86_com_init(void)
-{
-	if (pnp_platform_devices && !force_legacy_probe)
-		return -ENODEV;
-
-	return platform_device_register(&x86_com_device);
-}
-
-module_init(serial8250_x86_com_init);
-
-MODULE_AUTHOR("Bjorn Helgaas");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Generic 8250/16x50 legacy probe module");

arch/x86_64/kernel/Makefile

@@ -32,7 +32,6 @@ obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 obj-$(CONFIG_IOMMU)		+= pci-gart.o aperture.o
 obj-$(CONFIG_CALGARY_IOMMU)	+= pci-calgary.o tce.o
 obj-$(CONFIG_SWIOTLB)		+= pci-swiotlb.o
-obj-$(CONFIG_SERIAL_8250)	+= legacy_serial.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o
 obj-$(CONFIG_X86_PM_TIMER)	+= pmtimer.o
 obj-$(CONFIG_X86_VSMP)		+= vsmp.o
@@ -51,7 +50,6 @@ CFLAGS_vsyscall.o		:= $(PROFILING) -g0
 
 therm_throt-y                   += ../../i386/kernel/cpu/mcheck/therm_throt.o
 bootflag-y			+= ../../i386/kernel/bootflag.o
-legacy_serial-y			+= ../../i386/kernel/legacy_serial.o
 cpuid-$(subst m,y,$(CONFIG_X86_CPUID))  += ../../i386/kernel/cpuid.o
 topology-y                     += ../../i386/kernel/topology.o
 microcode-$(subst m,y,$(CONFIG_MICROCODE))  += ../../i386/kernel/microcode.o

drivers/serial/Kconfig

@@ -88,21 +88,17 @@ config SERIAL_8250_PCI
 	depends on SERIAL_8250 && PCI
 	default SERIAL_8250
 	help
-	  Say Y here if you have PCI serial ports.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called 8250_pci.
+	  This builds standard PCI serial support. You may be able to
+	  disable this feature if you only need legacy serial support.
+	  Saves about 9K.
 
 config SERIAL_8250_PNP
 	tristate "8250/16550 PNP device support" if EMBEDDED
 	depends on SERIAL_8250 && PNP
 	default SERIAL_8250
 	help
-	  Say Y here if you have serial ports described by PNPBIOS or ACPI.
-	  These are typically ports built into the system board.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called 8250_pnp.
+	  This builds standard PNP serial support. You may be able to
+	  disable this feature if you only need legacy serial support.
 
 config SERIAL_8250_HP300
 	tristate

include/asm-i386/serial.h

@@ -11,3 +11,19 @@
  * megabits/second; but this requires the faster clock.
  */
 #define BASE_BAUD ( 1843200 / 16 )
+
+/* Standard COM flags (except for COM4, because of the 8514 problem) */
+#ifdef CONFIG_SERIAL_DETECT_IRQ
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
+#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
+#else
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
+#endif
+
+#define SERIAL_PORT_DFNS			\
+	/* UART CLK   PORT IRQ     FLAGS        */			\
+	{ 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS },	/* ttyS0 */	\
+	{ 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS },	/* ttyS1 */	\
+	{ 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS },	/* ttyS2 */	\
+	{ 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS },	/* ttyS3 */

include/asm-x86_64/serial.h

@@ -11,3 +11,19 @@
  * megabits/second; but this requires the faster clock.
  */
 #define BASE_BAUD ( 1843200 / 16 )
+
+/* Standard COM flags (except for COM4, because of the 8514 problem) */
+#ifdef CONFIG_SERIAL_DETECT_IRQ
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
+#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
+#else
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
+#endif
+
+#define SERIAL_PORT_DFNS			\
+	/* UART CLK   PORT IRQ     FLAGS        */			\
+	{ 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS },	/* ttyS0 */	\
+	{ 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS },	/* ttyS1 */	\
+	{ 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS },	/* ttyS2 */	\
+	{ 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS },	/* ttyS3 */