ARM: Kirkwood: Convert dreamplug to pinctrl.

Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NJason Cooper <jason@lakedaemon.net>

arch/arm/boot/dts/kirkwood-dreamplug.dts

 /dts-v1/;
 
 /include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
 
 / {
 	model = "Globalscale Technologies Dreamplug";
@@ -16,6 +17,26 @@
 	};
 
 	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+
+			pinctrl-0 = < &pmx_spi
+				      &pmx_led_bluetooth &pmx_led_wifi
+				      &pmx_led_wifi_ap >;
+			pinctrl-names = "default";
+
+			pmx_led_bluetooth: pmx-led-bluetooth {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+			pmx_led_wifi: pmx-led-wifi {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+			pmx_led_wifi_ap: pmx-led-wifi-ap {
+				marvell,pins = "mpp49";
+				marvell,function = "gpio";
+			};
+		};
 		serial@12000 {
 			clock-frequency = <200000000>;
 			status = "ok";

arch/arm/mach-kirkwood/board-dreamplug.c

@@ -32,7 +32,6 @@
 #include <mach/bridge-regs.h>
 #include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
-#include "mpp.h"
 
 static struct mv643xx_eth_platform_data dreamplug_ge00_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
@@ -46,24 +45,11 @@ static struct mvsdio_platform_data dreamplug_mvsdio_data = {
 	/* unfortunately the CD signal has not been connected */
 };
 
-static unsigned int dreamplug_mpp_config[] __initdata = {
-	MPP0_SPI_SCn,
-	MPP1_SPI_MOSI,
-	MPP2_SPI_SCK,
-	MPP3_SPI_MISO,
-	MPP47_GPIO,	/* Bluetooth LED */
-	MPP48_GPIO,	/* Wifi LED */
-	MPP49_GPIO,	/* Wifi AP LED */
-	0
-};
-
 void __init dreamplug_init(void)
 {
 	/*
 	 * Basic setup. Needs to be called early.
 	 */
-	kirkwood_mpp_conf(dreamplug_mpp_config);
-
 	kirkwood_ge00_init(&dreamplug_ge00_data);
 	kirkwood_ge01_init(&dreamplug_ge01_data);
 	kirkwood_sdio_init(&dreamplug_mvsdio_data);