[ARM] mv78xx0: Add Marvell RD-78x00-mASA Reference Design support

Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
Acked-by: NStanislav Samsonov <samsonov@marvell.com>
Signed-off-by: NNicolas Pitre <nico@marvell.com>

arch/arm/configs/mv78xx0_defconfig

@@ -165,6 +165,7 @@ CONFIG_ARCH_MV78XX0=y
 # Marvell MV78xx0 Implementations
 #
 CONFIG_MACH_DB78X00_BP=y
+CONFIG_MACH_RD78X00_MASA=y
 
 #
 # Boot options

arch/arm/mach-mv78xx0/Kconfig

@@ -8,6 +8,12 @@ config MACH_DB78X00_BP
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell DB-78x00-BP Development Board.
 
+config MACH_RD78X00_MASA
+	bool "Marvell RD-78x00-mASA Reference Design"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell RD-78x00-mASA Reference Design.
+
 endmenu
 
 endif

arch/arm/mach-mv78xx0/Makefile

 obj-y				+= common.o addr-map.o irq.o pcie.o
 obj-$(CONFIG_MACH_DB78X00_BP)	+= db78x00-bp-setup.o
+obj-$(CONFIG_MACH_RD78X00_MASA)	+= rd78x00-masa-setup.o

arch/arm/mach-mv78xx0/rd78x00-masa-setup.c

+/*
+ * arch/arm/mach-mv78x00/rd78x00-masa-setup.c
+ *
+ * Marvell RD-78x00-mASA Development Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
+#include <mach/mv78xx0.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data rd78x00_masa_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv643xx_eth_platform_data rd78x00_masa_ge01_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(9),
+};
+
+static struct mv643xx_eth_platform_data rd78x00_masa_ge10_data = {
+};
+
+static struct mv643xx_eth_platform_data rd78x00_masa_ge11_data = {
+};
+
+static struct mv_sata_platform_data rd78x00_masa_sata_data = {
+	.n_ports	= 2,
+};
+
+static void __init rd78x00_masa_init(void)
+{
+	/*
+	 * Basic MV78x00 setup. Needs to be called early.
+	 */
+	mv78xx0_init();
+
+	/*
+	 * Partition on-chip peripherals between the two CPU cores.
+	 */
+	if (mv78xx0_core_index() == 0) {
+		mv78xx0_ehci0_init();
+		mv78xx0_ehci1_init();
+		mv78xx0_ge00_init(&rd78x00_masa_ge00_data);
+		mv78xx0_ge10_init(&rd78x00_masa_ge10_data);
+		mv78xx0_sata_init(&rd78x00_masa_sata_data);
+		mv78xx0_uart0_init();
+		mv78xx0_uart2_init();
+	} else {
+		mv78xx0_ehci2_init();
+		mv78xx0_ge01_init(&rd78x00_masa_ge01_data);
+		mv78xx0_ge11_init(&rd78x00_masa_ge11_data);
+		mv78xx0_uart1_init();
+		mv78xx0_uart3_init();
+	}
+}
+
+static int __init rd78x00_pci_init(void)
+{
+	/*
+	 * Assign all PCIe devices to CPU core #0.
+	 */
+	if (machine_is_rd78x00_masa() && mv78xx0_core_index() == 0)
+		mv78xx0_pcie_init(1, 1);
+
+	return 0;
+}
+subsys_initcall(rd78x00_pci_init);
+
+MACHINE_START(RD78X00_MASA, "Marvell RD-78x00-MASA Development Board")
+	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
+	.phys_io	= MV78XX0_REGS_PHYS_BASE,
+	.io_pg_offst	= ((MV78XX0_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= rd78x00_masa_init,
+	.map_io		= mv78xx0_map_io,
+	.init_irq	= mv78xx0_init_irq,
+	.timer		= &mv78xx0_timer,
+MACHINE_END