V4L/DVB: Remove usbvideo quickcam_messenger driver

obsolete v4l1 driver replaced by gspca_stv06xx
Signed-off-by: NAmerigo Wang <amwang@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Documentation/feature-removal-schedule.txt

@@ -459,14 +459,6 @@ Who:	Corentin Chary <corentin.chary@gmail.com>
 
 ----------------------------
 
-What:	usbvideo quickcam_messenger driver
-When:	2.6.35
-Files:	drivers/media/video/usbvideo/quickcam_messenger.[ch]
-Why:	obsolete v4l1 driver replaced by gspca_stv06xx
-Who:	Hans de Goede <hdegoede@redhat.com>
-
-----------------------------
-
 What:	ov511 v4l1 driver
 When:	2.6.35
 Files:	drivers/media/video/ov511.[ch]

drivers/media/video/usbvideo/Kconfig

@@ -37,17 +37,3 @@ config USB_KONICAWC
 	  To compile this driver as a module, choose M here: the
 	  module will be called konicawc.
 
-config USB_QUICKCAM_MESSENGER
-	tristate "USB Logitech Quickcam Messenger (DEPRECATED)"
-	depends on VIDEO_V4L1
-	select VIDEO_USBVIDEO
-	---help---
-	  This driver is DEPRECATED please use the gspca stv06xx module
-	  instead.
-
-	  Say Y or M here to enable support for the USB Logitech Quickcam
-	  Messenger webcam.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called quickcam_messenger.
-

drivers/media/video/usbvideo/Makefile

@@ -2,4 +2,3 @@ obj-$(CONFIG_VIDEO_USBVIDEO)    += usbvideo.o
 obj-$(CONFIG_USB_IBMCAM)        += ibmcam.o ultracam.o
 obj-$(CONFIG_USB_KONICAWC)      += konicawc.o
 obj-$(CONFIG_USB_VICAM)         += vicam.o
-obj-$(CONFIG_USB_QUICKCAM_MESSENGER)	+= quickcam_messenger.o

drivers/media/video/usbvideo/quickcam_messenger.h

-#ifndef quickcam_messenger_h
-#define quickcam_messenger_h
-
-#ifndef CONFIG_INPUT
-/* if we're not using input we dummy out these functions */
-#define qcm_register_input(...)
-#define qcm_unregister_input(...)
-#define qcm_report_buttonstat(...)
-#define qcm_setup_input_int(...) 0
-#define qcm_stop_int_data(...)
-#define qcm_alloc_int_urb(...) 0
-#define qcm_free_int(...)
-#endif
-
-
-#define CHECK_RET(ret, expr) \
-	if ((ret = expr) < 0) return ret
-
-/* Control Registers for the STVV6422 ASIC
- * - this define is taken from the qc-usb-messenger code
- */
-#define STV_ISO_ENABLE		0x1440
-#define ISOC_PACKET_SIZE	1023
-
-/* Chip identification number including revision indicator */
-#define CMOS_SENSOR_IDREV	0xE00A
-
-struct rgb {
-	u8 b;
-	u8 g;
-	u8 r;
-	u8 b2;
-	u8 g2;
-	u8 r2;
-};
-
-struct bayL0 {
-	u8 g;
-	u8 r;
-};
-
-struct bayL1 {
-	u8 b;
-	u8 g;
-};
-
-struct cam_size {
-	u16	width;
-	u16	height;
-	u8	cmd;
-};
-
-static const struct cam_size camera_sizes[] = {
-	{ 160, 120, 0xf },
-	{ 320, 240, 0x2 },
-};
-
-enum frame_sizes {
-	SIZE_160X120	= 0,
-	SIZE_320X240	= 1,
-};
-
-#define MAX_FRAME_SIZE SIZE_320X240
-
-struct qcm {
-	u16 colour;
-	u16 hue;
-	u16 brightness;
-	u16 contrast;
-	u16 whiteness;
-
-	u8 size;
-	int height;
-	int width;
-	u8 *scratch;
-	struct urb *button_urb;
-	u8 button_sts;
-	u8 button_sts_buf;
-
-#ifdef CONFIG_INPUT
-	struct input_dev *input;
-	char input_physname[64];
-#endif
-};
-
-struct regval {
-	u16 reg;
-	u8 val;
-};
-/* this table is derived from the
-qc-usb-messenger code */
-static const struct regval regval_table[] = {
-	{ STV_ISO_ENABLE, 0x00 },
-	{ 0x1436, 0x00 }, { 0x1432, 0x03 },
-	{ 0x143a, 0xF9 }, { 0x0509, 0x38 },
-	{ 0x050a, 0x38 }, { 0x050b, 0x38 },
-	{ 0x050c, 0x2A }, { 0x050d, 0x01 },
-	{ 0x1431, 0x00 }, { 0x1433, 0x34 },
-	{ 0x1438, 0x18 }, { 0x1439, 0x00 },
-	{ 0x143b, 0x05 }, { 0x143c, 0x00 },
-	{ 0x143e, 0x01 }, { 0x143d, 0x00 },
-	{ 0x1442, 0xe2 }, { 0x1500, 0xd0 },
-	{ 0x1500, 0xd0 }, { 0x1500, 0x50 },
-	{ 0x1501, 0xaf }, { 0x1502, 0xc2 },
-	{ 0x1503, 0x45 }, { 0x1505, 0x02 },
-	{ 0x150e, 0x8e }, { 0x150f, 0x37 },
-	{ 0x15c0, 0x00 },
-};
-
-static const unsigned char marker[] = { 0x00, 0xff, 0x00, 0xFF };
-
-#endif /* quickcam_messenger_h */