提交 564c274c 编写于 作者: A Amir Vadai 提交者: David S. Miller

net/mlx4_en: DCB QoS support

Set TSA, promised BW and PFC using IEEE 802.1qaz netlink commands.
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 e5395e92
......@@ -11,6 +11,18 @@ config MLX4_EN
This driver supports Mellanox Technologies ConnectX Ethernet
devices.
config MLX4_EN_DCB
bool "Data Center Bridging (DCB) Support"
default y
depends on MLX4_EN && DCB
---help---
Say Y here if you want to use Data Center Bridging (DCB) in the
driver.
If set to N, will not be able to configure QoS and ratelimit attributes.
This flag is depended on the kernel's DCB support.
If unsure, set to Y
config MLX4_CORE
tristate
depends on PCI
......
......@@ -7,3 +7,4 @@ obj-$(CONFIG_MLX4_EN) += mlx4_en.o
mlx4_en-y := en_main.o en_tx.o en_rx.o en_ethtool.o en_port.o en_cq.o \
en_resources.o en_netdev.o en_selftest.o
mlx4_en-$(CONFIG_MLX4_EN_DCB) += en_dcb_nl.o
/*
* Copyright (c) 2011 Mellanox Technologies. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*
*/
#include <linux/dcbnl.h>
#include "mlx4_en.h"
static int mlx4_en_dcbnl_ieee_getets(struct net_device *dev,
struct ieee_ets *ets)
{
struct mlx4_en_priv *priv = netdev_priv(dev);
struct ieee_ets *my_ets = &priv->ets;
/* No IEEE PFC settings available */
if (!my_ets)
return -EINVAL;
ets->ets_cap = IEEE_8021QAZ_MAX_TCS;
ets->cbs = my_ets->cbs;
memcpy(ets->tc_tx_bw, my_ets->tc_tx_bw, sizeof(ets->tc_tx_bw));
memcpy(ets->tc_tsa, my_ets->tc_tsa, sizeof(ets->tc_tsa));
memcpy(ets->prio_tc, my_ets->prio_tc, sizeof(ets->prio_tc));
return 0;
}
static int mlx4_en_ets_validate(struct mlx4_en_priv *priv, struct ieee_ets *ets)
{
int i;
int total_ets_bw = 0;
int has_ets_tc = 0;
for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) {
if (ets->prio_tc[i] > MLX4_EN_NUM_UP) {
en_err(priv, "Bad priority in UP <=> TC mapping. TC: %d, UP: %d\n",
i, ets->prio_tc[i]);
return -EINVAL;
}
switch (ets->tc_tsa[i]) {
case IEEE_8021QAZ_TSA_STRICT:
break;
case IEEE_8021QAZ_TSA_ETS:
has_ets_tc = 1;
total_ets_bw += ets->tc_tx_bw[i];
break;
default:
en_err(priv, "TC[%d]: Not supported TSA: %d\n",
i, ets->tc_tsa[i]);
return -ENOTSUPP;
}
}
if (has_ets_tc && total_ets_bw != MLX4_EN_BW_MAX) {
en_err(priv, "Bad ETS BW sum: %d. Should be exactly 100%%\n",
total_ets_bw);
return -EINVAL;
}
return 0;
}
static int mlx4_en_config_port_scheduler(struct mlx4_en_priv *priv,
struct ieee_ets *ets, u16 *ratelimit)
{
struct mlx4_en_dev *mdev = priv->mdev;
int num_strict = 0;
int i;
__u8 tc_tx_bw[IEEE_8021QAZ_MAX_TCS] = { 0 };
__u8 pg[IEEE_8021QAZ_MAX_TCS] = { 0 };
ets = ets ?: &priv->ets;
/* higher TC means higher priority => lower pg */
for (i = IEEE_8021QAZ_MAX_TCS - 1; i >= 0; i--) {
switch (ets->tc_tsa[i]) {
case IEEE_8021QAZ_TSA_STRICT:
pg[i] = num_strict++;
tc_tx_bw[i] = MLX4_EN_BW_MAX;
break;
case IEEE_8021QAZ_TSA_ETS:
pg[i] = MLX4_EN_TC_ETS;
tc_tx_bw[i] = ets->tc_tx_bw[i] ?: MLX4_EN_BW_MIN;
break;
}
}
return mlx4_SET_PORT_SCHEDULER(mdev->dev, priv->port, tc_tx_bw, pg,
ratelimit);
}
static int
mlx4_en_dcbnl_ieee_setets(struct net_device *dev, struct ieee_ets *ets)
{
struct mlx4_en_priv *priv = netdev_priv(dev);
struct mlx4_en_dev *mdev = priv->mdev;
int err;
err = mlx4_en_ets_validate(priv, ets);
if (err)
return err;
err = mlx4_SET_PORT_PRIO2TC(mdev->dev, priv->port, ets->prio_tc);
if (err)
return err;
err = mlx4_en_config_port_scheduler(priv, ets, NULL);
if (err)
return err;
memcpy(&priv->ets, ets, sizeof(priv->ets));
return 0;
}
static int mlx4_en_dcbnl_ieee_getpfc(struct net_device *dev,
struct ieee_pfc *pfc)
{
struct mlx4_en_priv *priv = netdev_priv(dev);
pfc->pfc_cap = IEEE_8021QAZ_MAX_TCS;
pfc->pfc_en = priv->prof->tx_ppp;
return 0;
}
static int mlx4_en_dcbnl_ieee_setpfc(struct net_device *dev,
struct ieee_pfc *pfc)
{
struct mlx4_en_priv *priv = netdev_priv(dev);
struct mlx4_en_dev *mdev = priv->mdev;
int err;
en_dbg(DRV, priv, "cap: 0x%x en: 0x%x mbc: 0x%x delay: %d\n",
pfc->pfc_cap,
pfc->pfc_en,
pfc->mbc,
pfc->delay);
priv->prof->rx_pause = priv->prof->tx_pause = !!pfc->pfc_en;
priv->prof->rx_ppp = priv->prof->tx_ppp = pfc->pfc_en;
err = mlx4_SET_PORT_general(mdev->dev, priv->port,
priv->rx_skb_size + ETH_FCS_LEN,
priv->prof->tx_pause,
priv->prof->tx_ppp,
priv->prof->rx_pause,
priv->prof->rx_ppp);
if (err)
en_err(priv, "Failed setting pause params\n");
return err;
}
static u8 mlx4_en_dcbnl_getdcbx(struct net_device *dev)
{
return DCB_CAP_DCBX_VER_IEEE;
}
static u8 mlx4_en_dcbnl_setdcbx(struct net_device *dev, u8 mode)
{
if ((mode & DCB_CAP_DCBX_LLD_MANAGED) ||
(mode & DCB_CAP_DCBX_VER_CEE) ||
!(mode & DCB_CAP_DCBX_VER_IEEE) ||
!(mode & DCB_CAP_DCBX_HOST))
return 1;
return 0;
}
const struct dcbnl_rtnl_ops mlx4_en_dcbnl_ops = {
.ieee_getets = mlx4_en_dcbnl_ieee_getets,
.ieee_setets = mlx4_en_dcbnl_ieee_setets,
.ieee_getpfc = mlx4_en_dcbnl_ieee_getpfc,
.ieee_setpfc = mlx4_en_dcbnl_ieee_setpfc,
.getdcbx = mlx4_en_dcbnl_getdcbx,
.setdcbx = mlx4_en_dcbnl_setdcbx,
};
......@@ -967,6 +967,7 @@ void mlx4_en_destroy_netdev(struct net_device *dev)
mutex_unlock(&mdev->state_lock);
mlx4_en_free_resources(priv);
free_netdev(dev);
}
......@@ -1080,6 +1081,10 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
INIT_WORK(&priv->watchdog_task, mlx4_en_restart);
INIT_WORK(&priv->linkstate_task, mlx4_en_linkstate);
INIT_DELAYED_WORK(&priv->stats_task, mlx4_en_do_get_stats);
#ifdef CONFIG_MLX4_EN_DCB
if (!mlx4_is_slave(priv->mdev->dev))
dev->dcbnl_ops = &mlx4_en_dcbnl_ops;
#endif
/* Query for default mac and max mtu */
priv->max_mtu = mdev->dev->caps.eth_mtu_cap[priv->port];
......
......@@ -40,6 +40,9 @@
#include <linux/mutex.h>
#include <linux/netdevice.h>
#include <linux/if_vlan.h>
#ifdef CONFIG_MLX4_EN_DCB
#include <linux/dcbnl.h>
#endif
#include <linux/mlx4/device.h>
#include <linux/mlx4/qp.h>
......@@ -110,6 +113,7 @@ enum {
#define MLX4_EN_NUM_TX_RINGS 8
#define MLX4_EN_NUM_PPP_RINGS 8
#define MAX_TX_RINGS (MLX4_EN_NUM_TX_RINGS + MLX4_EN_NUM_PPP_RINGS)
#define MLX4_EN_NUM_UP 8
#define MLX4_EN_DEF_TX_RING_SIZE 512
#define MLX4_EN_DEF_RX_RING_SIZE 1024
......@@ -410,6 +414,15 @@ struct mlx4_en_frag_info {
};
#ifdef CONFIG_MLX4_EN_DCB
/* Minimal TC BW - setting to 0 will block traffic */
#define MLX4_EN_BW_MIN 1
#define MLX4_EN_BW_MAX 100 /* Utilize 100% of the line */
#define MLX4_EN_TC_ETS 7
#endif
struct mlx4_en_priv {
struct mlx4_en_dev *mdev;
struct mlx4_en_port_profile *prof;
......@@ -483,6 +496,10 @@ struct mlx4_en_priv {
int vids[128];
bool wol;
struct device *ddev;
#ifdef CONFIG_MLX4_EN_DCB
struct ieee_ets ets;
#endif
};
enum mlx4_en_wol {
......@@ -557,6 +574,10 @@ int mlx4_SET_VLAN_FLTR(struct mlx4_dev *dev, struct mlx4_en_priv *priv);
int mlx4_en_DUMP_ETH_STATS(struct mlx4_en_dev *mdev, u8 port, u8 reset);
int mlx4_en_QUERY_PORT(struct mlx4_en_dev *mdev, u8 port);
#ifdef CONFIG_MLX4_EN_DCB
extern const struct dcbnl_rtnl_ops mlx4_en_dcbnl_ops;
#endif
#define MLX4_EN_NUM_SELF_TEST 5
void mlx4_en_ex_selftest(struct net_device *dev, u32 *flags, u64 *buf);
u64 mlx4_en_mac_to_u64(u8 *addr);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册