ARM: dts: OMAP4: Cleanup and move GIC outside of the OCP

Remove some useless comment and move GIC controller outside
of the OCP node since it does use the MPU internal bus and
not the OCP.
This will not change the functionality but will reflect the
reality more accurately.
Signed-off-by: NBenoit Cousson <b-cousson@ti.com>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>

arch/arm/boot/dts/omap4.dtsi

@@ -38,6 +38,14 @@
 		};
 	};
 
+	gic: interrupt-controller@48241000 {
+		compatible = "arm,cortex-a9-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = <0x48241000 0x1000>,
+		      <0x48240100 0x0100>;
+	};
+
 	L2: l2-cache-controller@48242000 {
 		compatible = "arm,pl310-cache";
 		reg = <0x48242000 0x1000>;
@@ -76,30 +84,6 @@
 	/*
 	 * XXX: Use a flat representation of the OMAP4 interconnect.
 	 * The real OMAP interconnect network is quite complex.
-	 *
-	 * MPU -+-- MPU_PRIVATE - GIC, L2
-	 *      |
-	 *      +----------------+----------+
-	 *      |                |          |
-	 *      +            +- EMIF - DDR  |
-	 *      |            |              |
-	 *      |            +     +--------+
-	 *      |            |     |
-	 *      |            +- L4_ABE - AESS, MCBSP, TIMERs...
-	 *      |            |
-	 *      +- L3_MAIN --+- L4_CORE - IPs...
-	 *                   |
-	 *                   +- L4_PER - IPs...
-	 *                   |
-	 *                   +- L4_CFG -+- L4_WKUP - IPs...
-	 *                   |          |
-	 *                   |          +- IPs...
-	 *                   +- IPU ----+
-	 *                   |          |
-	 *                   +- DSP ----+
-	 *                   |          |
-	 *                   +- DSS ----+
-	 *
 	 * Since that will not bring real advantage to represent that in DT for
 	 * the moment, just use a fake OCP bus entry to represent the whole bus
 	 * hierarchy.
@@ -111,14 +95,6 @@
 		ranges;
 		ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
 
-		gic: interrupt-controller@48241000 {
-			compatible = "arm,cortex-a9-gic";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = <0x48241000 0x1000>,
-			      <0x48240100 0x0100>;
-		};
-
 		gpio1: gpio@4a310000 {
 			compatible = "ti,omap4-gpio";
 			ti,hwmods = "gpio1";