提交 56213ca4 编写于 作者: T Tony Lindgren

omap2/3: Multiboot compile fixes to compile in omap2 and omap3

Allows compiling in omap2 and omap3.
Signed-off-by: NTony Lindgren <tony@atomide.com>
上级 95561751
......@@ -34,6 +34,10 @@ obj-$(CONFIG_ARCH_OMAP2420) += sram242x.o
obj-$(CONFIG_ARCH_OMAP2430) += sram243x.o
obj-$(CONFIG_ARCH_OMAP3) += sram34xx.o
AFLAGS_sram242x.o :=-Wa,-march=armv6
AFLAGS_sram243x.o :=-Wa,-march=armv6
AFLAGS_sram34xx.o :=-Wa,-march=armv7-a
# Pin multiplexing
obj-$(CONFIG_ARCH_OMAP3) += mux34xx.o
......@@ -47,6 +51,10 @@ obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o
obj-$(CONFIG_ARCH_OMAP24XX) += sleep24xx.o
obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o cpuidle34xx.o
obj-$(CONFIG_PM_DEBUG) += pm-debug.o
AFLAGS_sleep24xx.o :=-Wa,-march=armv6
AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a
endif
# PRCM
......
......@@ -83,6 +83,32 @@ int omap2_clksel_set_parent(struct clk *clk, struct clk *new_parent);
u32 omap2_get_dpll_rate(struct clk *clk);
void omap2_init_dpll_parent(struct clk *clk);
int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name);
#ifdef CONFIG_ARCH_OMAP2
void omap2xxx_clk_prepare_for_reboot(void);
#else
static inline void omap2xxx_clk_prepare_for_reboot(void)
{
}
#endif
#ifdef CONFIG_ARCH_OMAP3
void omap3_clk_prepare_for_reboot(void);
#else
static inline void omap3_clk_prepare_for_reboot(void)
{
}
#endif
#ifdef CONFIG_ARCH_OMAP4
void omap4_clk_prepare_for_reboot(void);
#else
static inline void omap4_clk_prepare_for_reboot(void)
{
}
#endif
int omap2_dflt_clk_enable(struct clk *clk);
void omap2_dflt_clk_disable(struct clk *clk);
void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg,
......
......@@ -417,7 +417,12 @@ struct prcm_config {
extern const struct prcm_config omap2420_rate_table[];
#ifdef CONFIG_ARCH_OMAP2430
extern const struct prcm_config omap2430_rate_table[];
#else
#define omap2430_rate_table NULL
#endif
extern const struct prcm_config *rate_table;
extern const struct prcm_config *curr_prcm_set;
......
......@@ -7,27 +7,35 @@ config ARCH_OMAP_OTG
choice
prompt "OMAP System Type"
default ARCH_OMAP1
default ARCH_OMAP2PLUS
config ARCH_OMAP1
bool "TI OMAP1"
select COMMON_CLKDEV
help
"Systems based on omap7xx, omap15xx or omap16xx"
config ARCH_OMAP2PLUS
bool "TI OMAP2/3/4"
select COMMON_CLKDEV
help
"Systems based on omap24xx, omap34xx or omap44xx"
config ARCH_OMAP2
bool "TI OMAP2"
depends on ARCH_OMAP2PLUS
select CPU_V6
select COMMON_CLKDEV
config ARCH_OMAP3
bool "TI OMAP3"
depends on ARCH_OMAP2PLUS
select CPU_V7
select COMMON_CLKDEV
config ARCH_OMAP4
bool "TI OMAP4"
depends on ARCH_OMAP2PLUS
select CPU_V7
select ARM_GIC
select COMMON_CLKDEV
endchoice
......
......@@ -1630,7 +1630,7 @@ static int gpio_2irq(struct gpio_chip *chip, unsigned offset)
/*---------------------------------------------------------------------*/
static int initialized;
#if !(defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4))
#if defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP2)
static struct clk * gpio_ick;
#endif
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册