e1000e: cleanup some whitespace and indentation issues

Signed-off-by: NBruce Allan <bruce.w.allan@intel.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

drivers/net/ethernet/intel/e1000e/80003es2lan.c

@@ -1438,18 +1438,18 @@ static const struct e1000_phy_operations es2_phy_ops = {
 	.acquire		= e1000_acquire_phy_80003es2lan,
 	.check_polarity		= e1000_check_polarity_m88,
 	.check_reset_block	= e1000e_check_reset_block_generic,
-	.commit		 	= e1000e_phy_sw_reset,
-	.force_speed_duplex 	= e1000_phy_force_speed_duplex_80003es2lan,
-	.get_cfg_done       	= e1000_get_cfg_done_80003es2lan,
-	.get_cable_length   	= e1000_get_cable_length_80003es2lan,
-	.get_info       	= e1000e_get_phy_info_m88,
-	.read_reg       	= e1000_read_phy_reg_gg82563_80003es2lan,
+	.commit			= e1000e_phy_sw_reset,
+	.force_speed_duplex	= e1000_phy_force_speed_duplex_80003es2lan,
+	.get_cfg_done		= e1000_get_cfg_done_80003es2lan,
+	.get_cable_length	= e1000_get_cable_length_80003es2lan,
+	.get_info		= e1000e_get_phy_info_m88,
+	.read_reg		= e1000_read_phy_reg_gg82563_80003es2lan,
 	.release		= e1000_release_phy_80003es2lan,
-	.reset		  	= e1000e_phy_hw_reset_generic,
-	.set_d0_lplu_state  	= NULL,
-	.set_d3_lplu_state  	= e1000e_set_d3_lplu_state,
-	.write_reg      	= e1000_write_phy_reg_gg82563_80003es2lan,
-	.cfg_on_link_up      	= e1000_cfg_on_link_up_80003es2lan,
+	.reset			= e1000e_phy_hw_reset_generic,
+	.set_d0_lplu_state	= NULL,
+	.set_d3_lplu_state	= e1000e_set_d3_lplu_state,
+	.write_reg		= e1000_write_phy_reg_gg82563_80003es2lan,
+	.cfg_on_link_up		= e1000_cfg_on_link_up_80003es2lan,
 };
 
 static const struct e1000_nvm_operations es2_nvm_ops = {

drivers/net/ethernet/intel/e1000e/82571.c

@@ -1327,9 +1327,10 @@ static void e1000_clear_vfta_82571(struct e1000_hw *hw)
 			 */
 			vfta_offset = (hw->mng_cookie.vlan_id >>
 				       E1000_VFTA_ENTRY_SHIFT) &
-				      E1000_VFTA_ENTRY_MASK;
-			vfta_bit_in_reg = 1 << (hw->mng_cookie.vlan_id &
-					       E1000_VFTA_ENTRY_BIT_SHIFT_MASK);
+			    E1000_VFTA_ENTRY_MASK;
+			vfta_bit_in_reg =
+			    1 << (hw->mng_cookie.vlan_id &
+				  E1000_VFTA_ENTRY_BIT_SHIFT_MASK);
 		}
 		break;
 	default:
@@ -1931,7 +1932,7 @@ static const struct e1000_phy_operations e82_phy_ops_igp = {
 	.set_d0_lplu_state	= e1000_set_d0_lplu_state_82571,
 	.set_d3_lplu_state	= e1000e_set_d3_lplu_state,
 	.write_reg		= e1000e_write_phy_reg_igp,
-	.cfg_on_link_up      	= NULL,
+	.cfg_on_link_up		= NULL,
 };
 
 static const struct e1000_phy_operations e82_phy_ops_m88 = {
@@ -1949,7 +1950,7 @@ static const struct e1000_phy_operations e82_phy_ops_m88 = {
 	.set_d0_lplu_state	= e1000_set_d0_lplu_state_82571,
 	.set_d3_lplu_state	= e1000e_set_d3_lplu_state,
 	.write_reg		= e1000e_write_phy_reg_m88,
-	.cfg_on_link_up      	= NULL,
+	.cfg_on_link_up		= NULL,
 };
 
 static const struct e1000_phy_operations e82_phy_ops_bm = {
@@ -1967,7 +1968,7 @@ static const struct e1000_phy_operations e82_phy_ops_bm = {
 	.set_d0_lplu_state	= e1000_set_d0_lplu_state_82571,
 	.set_d3_lplu_state	= e1000e_set_d3_lplu_state,
 	.write_reg		= e1000e_write_phy_reg_bm2,
-	.cfg_on_link_up      	= NULL,
+	.cfg_on_link_up		= NULL,
 };
 
 static const struct e1000_nvm_operations e82571_nvm_ops = {

drivers/net/ethernet/intel/e1000e/defines.h

@@ -96,19 +96,19 @@
 
 /* mask to determine if packets should be dropped due to frame errors */
 #define E1000_RXD_ERR_FRAME_ERR_MASK ( \
-    E1000_RXD_ERR_CE  |                \
-    E1000_RXD_ERR_SE  |                \
-    E1000_RXD_ERR_SEQ |                \
-    E1000_RXD_ERR_CXE |                \
-    E1000_RXD_ERR_RXE)
+	E1000_RXD_ERR_CE  |		\
+	E1000_RXD_ERR_SE  |		\
+	E1000_RXD_ERR_SEQ |		\
+	E1000_RXD_ERR_CXE |		\
+	E1000_RXD_ERR_RXE)
 
 /* Same mask, but for extended and packet split descriptors */
 #define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \
-    E1000_RXDEXT_STATERR_CE  |            \
-    E1000_RXDEXT_STATERR_SE  |            \
-    E1000_RXDEXT_STATERR_SEQ |            \
-    E1000_RXDEXT_STATERR_CXE |            \
-    E1000_RXDEXT_STATERR_RXE)
+	E1000_RXDEXT_STATERR_CE  |	\
+	E1000_RXDEXT_STATERR_SE  |	\
+	E1000_RXDEXT_STATERR_SEQ |	\
+	E1000_RXDEXT_STATERR_CXE |	\
+	E1000_RXDEXT_STATERR_RXE)
 
 #define E1000_MRQC_RSS_FIELD_MASK              0xFFFF0000
 #define E1000_MRQC_RSS_FIELD_IPV4_TCP          0x00010000
@@ -253,14 +253,15 @@
 #define ADVERTISE_1000_FULL               0x0020
 
 /* 1000/H is not supported, nor spec-compliant. */
-#define E1000_ALL_SPEED_DUPLEX ( ADVERTISE_10_HALF |   ADVERTISE_10_FULL | \
-				ADVERTISE_100_HALF |  ADVERTISE_100_FULL | \
-						     ADVERTISE_1000_FULL)
-#define E1000_ALL_NOT_GIG      ( ADVERTISE_10_HALF |   ADVERTISE_10_FULL | \
-				ADVERTISE_100_HALF |  ADVERTISE_100_FULL)
-#define E1000_ALL_100_SPEED    (ADVERTISE_100_HALF |  ADVERTISE_100_FULL)
-#define E1000_ALL_10_SPEED      (ADVERTISE_10_HALF |   ADVERTISE_10_FULL)
-#define E1000_ALL_HALF_DUPLEX   (ADVERTISE_10_HALF |  ADVERTISE_100_HALF)
+#define E1000_ALL_SPEED_DUPLEX	( \
+	ADVERTISE_10_HALF | ADVERTISE_10_FULL | ADVERTISE_100_HALF | \
+	ADVERTISE_100_FULL | ADVERTISE_1000_FULL)
+#define E1000_ALL_NOT_GIG	( \
+	ADVERTISE_10_HALF | ADVERTISE_10_FULL | ADVERTISE_100_HALF | \
+	ADVERTISE_100_FULL)
+#define E1000_ALL_100_SPEED	(ADVERTISE_100_HALF | ADVERTISE_100_FULL)
+#define E1000_ALL_10_SPEED	(ADVERTISE_10_HALF | ADVERTISE_10_FULL)
+#define E1000_ALL_HALF_DUPLEX	(ADVERTISE_10_HALF | ADVERTISE_100_HALF)
 
 #define AUTONEG_ADVERTISE_SPEED_DEFAULT   E1000_ALL_SPEED_DUPLEX
 
@@ -422,11 +423,11 @@
  *   o LSC    = Link Status Change
  */
 #define IMS_ENABLE_MASK ( \
-    E1000_IMS_RXT0   |    \
-    E1000_IMS_TXDW   |    \
-    E1000_IMS_RXDMT0 |    \
-    E1000_IMS_RXSEQ  |    \
-    E1000_IMS_LSC)
+	E1000_IMS_RXT0   |    \
+	E1000_IMS_TXDW   |    \
+	E1000_IMS_RXDMT0 |    \
+	E1000_IMS_RXSEQ  |    \
+	E1000_IMS_LSC)
 
 /* Interrupt Mask Set */
 #define E1000_IMS_TXDW      E1000_ICR_TXDW      /* Transmit desc written back */

drivers/net/ethernet/intel/e1000e/ich8lan.c

@@ -4507,7 +4507,7 @@ static const struct e1000_mac_operations ich8_mac_ops = {
 	.reset_hw		= e1000_reset_hw_ich8lan,
 	.init_hw		= e1000_init_hw_ich8lan,
 	.setup_link		= e1000_setup_link_ich8lan,
-	.setup_physical_interface= e1000_setup_copper_link_ich8lan,
+	.setup_physical_interface = e1000_setup_copper_link_ich8lan,
 	/* id_led_init dependent on mac type */
 	.config_collision_dist	= e1000e_config_collision_dist_generic,
 	.rar_set		= e1000e_rar_set_generic,
@@ -4529,7 +4529,7 @@ static const struct e1000_phy_operations ich8_phy_ops = {
 
 static const struct e1000_nvm_operations ich8_nvm_ops = {
 	.acquire		= e1000_acquire_nvm_ich8lan,
-	.read		 	= e1000_read_nvm_ich8lan,
+	.read			= e1000_read_nvm_ich8lan,
 	.release		= e1000_release_nvm_ich8lan,
 	.reload			= e1000e_reload_nvm_generic,
 	.update			= e1000_update_nvm_checksum_ich8lan,

drivers/net/ethernet/intel/e1000e/mac.c

@@ -1074,8 +1074,8 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
 		ret_val = e1e_rphy(hw, PHY_AUTONEG_ADV, &mii_nway_adv_reg);
 		if (ret_val)
 			return ret_val;
-		ret_val =
-		    e1e_rphy(hw, PHY_LP_ABILITY, &mii_nway_lp_ability_reg);
+		ret_val = e1e_rphy(hw, PHY_LP_ABILITY,
+				   &mii_nway_lp_ability_reg);
 		if (ret_val)
 			return ret_val;
 

drivers/net/ethernet/intel/e1000e/netdev.c

@@ -6571,8 +6571,8 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	}
 
 	err = pci_request_selected_regions_exclusive(pdev,
-	                                  pci_select_bars(pdev, IORESOURCE_MEM),
-	                                  e1000e_driver_name);
+					  pci_select_bars(pdev, IORESOURCE_MEM),
+					  e1000e_driver_name);
 	if (err)
 		goto err_pci_reg;
 

drivers/net/ethernet/intel/e1000e/param.c

@@ -53,8 +53,7 @@ MODULE_PARM_DESC(copybreak,
  */
 #define E1000_PARAM_INIT { [0 ... E1000_MAX_NIC] = OPTION_UNSET }
 #define E1000_PARAM(X, desc)					\
-	static int X[E1000_MAX_NIC+1]		\
-		= E1000_PARAM_INIT;				\
+	static int X[E1000_MAX_NIC+1] = E1000_PARAM_INIT;	\
 	static unsigned int num_##X;				\
 	module_param_array_named(X, X, int, &num_##X, 0);	\
 	MODULE_PARM_DESC(X, desc);