提交 559764d1 编写于 作者: F Florian Fainelli 提交者: David S. Miller

cpmac: fix all checkpatch errors and warnings

This patches fixes a couple of checkpatch warnings and errors:
- lines over 80 columns
- printk() instead of pr_cont()
- assignments in tests (if ((foo == bar())))
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 264fd77a
...@@ -38,7 +38,7 @@ ...@@ -38,7 +38,7 @@
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/dma-mapping.h> #include <linux/dma-mapping.h>
#include <linux/clk.h> #include <linux/clk.h>
#include <asm/gpio.h> #include <linux/gpio.h>
#include <asm/atomic.h> #include <asm/atomic.h>
MODULE_AUTHOR("Eugene Konev <ejka@imfi.kspu.ru>"); MODULE_AUTHOR("Eugene Konev <ejka@imfi.kspu.ru>");
...@@ -108,7 +108,7 @@ MODULE_PARM_DESC(dumb_switch, "Assume switch is not connected to MDIO bus"); ...@@ -108,7 +108,7 @@ MODULE_PARM_DESC(dumb_switch, "Assume switch is not connected to MDIO bus");
#define CPMAC_RX_INT_CLEAR 0x019c #define CPMAC_RX_INT_CLEAR 0x019c
#define CPMAC_MAC_INT_ENABLE 0x01a8 #define CPMAC_MAC_INT_ENABLE 0x01a8
#define CPMAC_MAC_INT_CLEAR 0x01ac #define CPMAC_MAC_INT_CLEAR 0x01ac
#define CPMAC_MAC_ADDR_LO(channel) (0x01b0 + (channel) * 4) #define CPMAC_MAC_ADDR_LO(channel) (0x01b0 + (channel) * 4)
#define CPMAC_MAC_ADDR_MID 0x01d0 #define CPMAC_MAC_ADDR_MID 0x01d0
#define CPMAC_MAC_ADDR_HI 0x01d4 #define CPMAC_MAC_ADDR_HI 0x01d4
#define CPMAC_MAC_HASH_LO 0x01d8 #define CPMAC_MAC_HASH_LO 0x01d8
...@@ -227,7 +227,7 @@ static void cpmac_dump_regs(struct net_device *dev) ...@@ -227,7 +227,7 @@ static void cpmac_dump_regs(struct net_device *dev)
for (i = 0; i < CPMAC_REG_END; i += 4) { for (i = 0; i < CPMAC_REG_END; i += 4) {
if (i % 16 == 0) { if (i % 16 == 0) {
if (i) if (i)
printk("\n"); pr_cont("\n");
printk(KERN_DEBUG "%s: reg[%p]:", dev->name, printk(KERN_DEBUG "%s: reg[%p]:", dev->name,
priv->regs + i); priv->regs + i);
} }
...@@ -262,7 +262,7 @@ static void cpmac_dump_skb(struct net_device *dev, struct sk_buff *skb) ...@@ -262,7 +262,7 @@ static void cpmac_dump_skb(struct net_device *dev, struct sk_buff *skb)
for (i = 0; i < skb->len; i++) { for (i = 0; i < skb->len; i++) {
if (i % 16 == 0) { if (i % 16 == 0) {
if (i) if (i)
printk("\n"); pr_cont("\n");
printk(KERN_DEBUG "%s: data[%p]:", dev->name, printk(KERN_DEBUG "%s: data[%p]:", dev->name,
skb->data + i); skb->data + i);
} }
...@@ -873,7 +873,8 @@ static int cpmac_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) ...@@ -873,7 +873,8 @@ static int cpmac_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
return -EINVAL; return -EINVAL;
} }
static void cpmac_get_ringparam(struct net_device *dev, struct ethtool_ringparam* ring) static void cpmac_get_ringparam(struct net_device *dev,
struct ethtool_ringparam *ring)
{ {
struct cpmac_priv *priv = netdev_priv(dev); struct cpmac_priv *priv = netdev_priv(dev);
...@@ -888,7 +889,8 @@ static void cpmac_get_ringparam(struct net_device *dev, struct ethtool_ringparam ...@@ -888,7 +889,8 @@ static void cpmac_get_ringparam(struct net_device *dev, struct ethtool_ringparam
ring->tx_pending = 1; ring->tx_pending = 1;
} }
static int cpmac_set_ringparam(struct net_device *dev, struct ethtool_ringparam* ring) static int cpmac_set_ringparam(struct net_device *dev,
struct ethtool_ringparam *ring)
{ {
struct cpmac_priv *priv = netdev_priv(dev); struct cpmac_priv *priv = netdev_priv(dev);
...@@ -1012,8 +1014,8 @@ static int cpmac_open(struct net_device *dev) ...@@ -1012,8 +1014,8 @@ static int cpmac_open(struct net_device *dev)
priv->rx_head->prev->hw_next = (u32)0; priv->rx_head->prev->hw_next = (u32)0;
if ((res = request_irq(dev->irq, cpmac_irq, IRQF_SHARED, res = request_irq(dev->irq, cpmac_irq, IRQF_SHARED, dev->name, dev);
dev->name, dev))) { if (res) {
if (netif_msg_drv(priv)) if (netif_msg_drv(priv))
printk(KERN_ERR "%s: failed to obtain irq\n", printk(KERN_ERR "%s: failed to obtain irq\n",
dev->name); dev->name);
...@@ -1133,7 +1135,8 @@ static int __devinit cpmac_probe(struct platform_device *pdev) ...@@ -1133,7 +1135,8 @@ static int __devinit cpmac_probe(struct platform_device *pdev)
} }
if (phy_id == PHY_MAX_ADDR) { if (phy_id == PHY_MAX_ADDR) {
dev_err(&pdev->dev, "no PHY present, falling back to switch on MDIO bus 0\n"); dev_err(&pdev->dev, "no PHY present, falling back "
"to switch on MDIO bus 0\n");
strncpy(mdio_bus_id, "0", MII_BUS_ID_SIZE); /* fixed phys bus */ strncpy(mdio_bus_id, "0", MII_BUS_ID_SIZE); /* fixed phys bus */
phy_id = pdev->id; phy_id = pdev->id;
} }
...@@ -1169,7 +1172,8 @@ static int __devinit cpmac_probe(struct platform_device *pdev) ...@@ -1169,7 +1172,8 @@ static int __devinit cpmac_probe(struct platform_device *pdev)
priv->msg_enable = netif_msg_init(debug_level, 0xff); priv->msg_enable = netif_msg_init(debug_level, 0xff);
memcpy(dev->dev_addr, pdata->dev_addr, sizeof(pdata->dev_addr)); memcpy(dev->dev_addr, pdata->dev_addr, sizeof(pdata->dev_addr));
snprintf(priv->phy_name, MII_BUS_ID_SIZE, PHY_ID_FMT, mdio_bus_id, phy_id); snprintf(priv->phy_name, MII_BUS_ID_SIZE, PHY_ID_FMT,
mdio_bus_id, phy_id);
priv->phy = phy_connect(dev, priv->phy_name, &cpmac_adjust_link, 0, priv->phy = phy_connect(dev, priv->phy_name, &cpmac_adjust_link, 0,
PHY_INTERFACE_MODE_MII); PHY_INTERFACE_MODE_MII);
...@@ -1182,7 +1186,8 @@ static int __devinit cpmac_probe(struct platform_device *pdev) ...@@ -1182,7 +1186,8 @@ static int __devinit cpmac_probe(struct platform_device *pdev)
goto fail; goto fail;
} }
if ((rc = register_netdev(dev))) { rc = register_netdev(dev);
if (rc) {
printk(KERN_ERR "cpmac: error %i registering device %s\n", rc, printk(KERN_ERR "cpmac: error %i registering device %s\n", rc,
dev->name); dev->name);
goto fail; goto fail;
...@@ -1248,11 +1253,13 @@ int __devinit cpmac_init(void) ...@@ -1248,11 +1253,13 @@ int __devinit cpmac_init(void)
cpmac_mii->reset(cpmac_mii); cpmac_mii->reset(cpmac_mii);
for (i = 0; i < 300; i++) for (i = 0; i < 300; i++) {
if ((mask = cpmac_read(cpmac_mii->priv, CPMAC_MDIO_ALIVE))) mask = cpmac_read(cpmac_mii->priv, CPMAC_MDIO_ALIVE);
if (mask)
break; break;
else else
msleep(10); msleep(10);
}
mask &= 0x7fffffff; mask &= 0x7fffffff;
if (mask & (mask - 1)) { if (mask & (mask - 1)) {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册