提交 5519cf23 编写于 作者: M Maxime Ripard 提交者: Stephen Boyd

clk: sunxi-ng: Fix reset offset for the A23 and A33

There's been a copy and paste mistake in the A23 and A33 from the H3,
leading in the reset offset for the UART and I2C.
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
上级 4135b7f8
......@@ -689,14 +689,14 @@ static struct ccu_reset_map sun8i_a23_ccu_resets[] = {
[RST_BUS_I2S0] = { 0x2d0, BIT(12) },
[RST_BUS_I2S1] = { 0x2d0, BIT(13) },
[RST_BUS_I2C0] = { 0x2d4, BIT(0) },
[RST_BUS_I2C1] = { 0x2d4, BIT(1) },
[RST_BUS_I2C2] = { 0x2d4, BIT(2) },
[RST_BUS_UART0] = { 0x2d4, BIT(16) },
[RST_BUS_UART1] = { 0x2d4, BIT(17) },
[RST_BUS_UART2] = { 0x2d4, BIT(18) },
[RST_BUS_UART3] = { 0x2d4, BIT(19) },
[RST_BUS_UART4] = { 0x2d4, BIT(20) },
[RST_BUS_I2C0] = { 0x2d8, BIT(0) },
[RST_BUS_I2C1] = { 0x2d8, BIT(1) },
[RST_BUS_I2C2] = { 0x2d8, BIT(2) },
[RST_BUS_UART0] = { 0x2d8, BIT(16) },
[RST_BUS_UART1] = { 0x2d8, BIT(17) },
[RST_BUS_UART2] = { 0x2d8, BIT(18) },
[RST_BUS_UART3] = { 0x2d8, BIT(19) },
[RST_BUS_UART4] = { 0x2d8, BIT(20) },
};
static const struct sunxi_ccu_desc sun8i_a23_ccu_desc = {
......
......@@ -732,14 +732,14 @@ static struct ccu_reset_map sun8i_a33_ccu_resets[] = {
[RST_BUS_I2S0] = { 0x2d0, BIT(12) },
[RST_BUS_I2S1] = { 0x2d0, BIT(13) },
[RST_BUS_I2C0] = { 0x2d4, BIT(0) },
[RST_BUS_I2C1] = { 0x2d4, BIT(1) },
[RST_BUS_I2C2] = { 0x2d4, BIT(2) },
[RST_BUS_UART0] = { 0x2d4, BIT(16) },
[RST_BUS_UART1] = { 0x2d4, BIT(17) },
[RST_BUS_UART2] = { 0x2d4, BIT(18) },
[RST_BUS_UART3] = { 0x2d4, BIT(19) },
[RST_BUS_UART4] = { 0x2d4, BIT(20) },
[RST_BUS_I2C0] = { 0x2d8, BIT(0) },
[RST_BUS_I2C1] = { 0x2d8, BIT(1) },
[RST_BUS_I2C2] = { 0x2d8, BIT(2) },
[RST_BUS_UART0] = { 0x2d8, BIT(16) },
[RST_BUS_UART1] = { 0x2d8, BIT(17) },
[RST_BUS_UART2] = { 0x2d8, BIT(18) },
[RST_BUS_UART3] = { 0x2d8, BIT(19) },
[RST_BUS_UART4] = { 0x2d8, BIT(20) },
};
static const struct sunxi_ccu_desc sun8i_a33_ccu_desc = {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册