提交 53f52d7a 编写于 作者: T Tim Chen 提交者: Herbert Xu

crypto: tcrypt - Added speed tests for AEAD crypto alogrithms in tcrypt test suite

Adding simple speed tests for a range of block sizes for AEAD crypto
algorithms.
Signed-off-by: NTim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
上级 d764593a
......@@ -137,7 +137,272 @@ static int test_cipher_cycles(struct blkcipher_desc *desc, int enc,
return ret;
}
static int test_aead_jiffies(struct aead_request *req, int enc,
int blen, int sec)
{
unsigned long start, end;
int bcount;
int ret;
for (start = jiffies, end = start + sec * HZ, bcount = 0;
time_before(jiffies, end); bcount++) {
if (enc)
ret = crypto_aead_encrypt(req);
else
ret = crypto_aead_decrypt(req);
if (ret)
return ret;
}
printk("%d operations in %d seconds (%ld bytes)\n",
bcount, sec, (long)bcount * blen);
return 0;
}
static int test_aead_cycles(struct aead_request *req, int enc, int blen)
{
unsigned long cycles = 0;
int ret = 0;
int i;
local_irq_disable();
/* Warm-up run. */
for (i = 0; i < 4; i++) {
if (enc)
ret = crypto_aead_encrypt(req);
else
ret = crypto_aead_decrypt(req);
if (ret)
goto out;
}
/* The real thing. */
for (i = 0; i < 8; i++) {
cycles_t start, end;
start = get_cycles();
if (enc)
ret = crypto_aead_encrypt(req);
else
ret = crypto_aead_decrypt(req);
end = get_cycles();
if (ret)
goto out;
cycles += end - start;
}
out:
local_irq_enable();
if (ret == 0)
printk("1 operation in %lu cycles (%d bytes)\n",
(cycles + 4) / 8, blen);
return ret;
}
static u32 block_sizes[] = { 16, 64, 256, 1024, 8192, 0 };
static u32 aead_sizes[] = { 16, 64, 256, 512, 1024, 2048, 4096, 8192, 0 };
#define XBUFSIZE 8
#define MAX_IVLEN 32
static int testmgr_alloc_buf(char *buf[XBUFSIZE])
{
int i;
for (i = 0; i < XBUFSIZE; i++) {
buf[i] = (void *)__get_free_page(GFP_KERNEL);
if (!buf[i])
goto err_free_buf;
}
return 0;
err_free_buf:
while (i-- > 0)
free_page((unsigned long)buf[i]);
return -ENOMEM;
}
static void testmgr_free_buf(char *buf[XBUFSIZE])
{
int i;
for (i = 0; i < XBUFSIZE; i++)
free_page((unsigned long)buf[i]);
}
static void sg_init_aead(struct scatterlist *sg, char *xbuf[XBUFSIZE],
unsigned int buflen)
{
int np = (buflen + PAGE_SIZE - 1)/PAGE_SIZE;
int k, rem;
np = (np > XBUFSIZE) ? XBUFSIZE : np;
rem = buflen % PAGE_SIZE;
if (np > XBUFSIZE) {
rem = PAGE_SIZE;
np = XBUFSIZE;
}
sg_init_table(sg, np);
for (k = 0; k < np; ++k) {
if (k == (np-1))
sg_set_buf(&sg[k], xbuf[k], rem);
else
sg_set_buf(&sg[k], xbuf[k], PAGE_SIZE);
}
}
static void test_aead_speed(const char *algo, int enc, unsigned int sec,
struct aead_speed_template *template,
unsigned int tcount, u8 authsize,
unsigned int aad_size, u8 *keysize)
{
unsigned int i, j;
struct crypto_aead *tfm;
int ret = -ENOMEM;
const char *key;
struct aead_request *req;
struct scatterlist *sg;
struct scatterlist *asg;
struct scatterlist *sgout;
const char *e;
void *assoc;
char iv[MAX_IVLEN];
char *xbuf[XBUFSIZE];
char *xoutbuf[XBUFSIZE];
char *axbuf[XBUFSIZE];
unsigned int *b_size;
unsigned int iv_len;
if (enc == ENCRYPT)
e = "encryption";
else
e = "decryption";
if (testmgr_alloc_buf(xbuf))
goto out_noxbuf;
if (testmgr_alloc_buf(axbuf))
goto out_noaxbuf;
if (testmgr_alloc_buf(xoutbuf))
goto out_nooutbuf;
sg = kmalloc(sizeof(*sg) * 8 * 3, GFP_KERNEL);
if (!sg)
goto out_nosg;
asg = &sg[8];
sgout = &asg[8];
printk(KERN_INFO "\ntesting speed of %s %s\n", algo, e);
tfm = crypto_alloc_aead(algo, 0, 0);
if (IS_ERR(tfm)) {
pr_err("alg: aead: Failed to load transform for %s: %ld\n", algo,
PTR_ERR(tfm));
return;
}
req = aead_request_alloc(tfm, GFP_KERNEL);
if (!req) {
pr_err("alg: aead: Failed to allocate request for %s\n",
algo);
goto out;
}
i = 0;
do {
b_size = aead_sizes;
do {
assoc = axbuf[0];
if (aad_size < PAGE_SIZE)
memset(assoc, 0xff, aad_size);
else {
pr_err("associate data length (%u) too big\n",
aad_size);
goto out_nosg;
}
sg_init_one(&asg[0], assoc, aad_size);
if ((*keysize + *b_size) > TVMEMSIZE * PAGE_SIZE) {
pr_err("template (%u) too big for tvmem (%lu)\n",
*keysize + *b_size,
TVMEMSIZE * PAGE_SIZE);
goto out;
}
key = tvmem[0];
for (j = 0; j < tcount; j++) {
if (template[j].klen == *keysize) {
key = template[j].key;
break;
}
}
ret = crypto_aead_setkey(tfm, key, *keysize);
ret = crypto_aead_setauthsize(tfm, authsize);
iv_len = crypto_aead_ivsize(tfm);
if (iv_len)
memset(&iv, 0xff, iv_len);
crypto_aead_clear_flags(tfm, ~0);
printk(KERN_INFO "test %u (%d bit key, %d byte blocks): ",
i, *keysize * 8, *b_size);
memset(tvmem[0], 0xff, PAGE_SIZE);
if (ret) {
pr_err("setkey() failed flags=%x\n",
crypto_aead_get_flags(tfm));
goto out;
}
sg_init_aead(&sg[0], xbuf,
*b_size + (enc ? authsize : 0));
sg_init_aead(&sgout[0], xoutbuf,
*b_size + (enc ? authsize : 0));
aead_request_set_crypt(req, sg, sgout, *b_size, iv);
aead_request_set_assoc(req, asg, aad_size);
if (sec)
ret = test_aead_jiffies(req, enc, *b_size, sec);
else
ret = test_aead_cycles(req, enc, *b_size);
if (ret) {
pr_err("%s() failed return code=%d\n", e, ret);
break;
}
b_size++;
i++;
} while (*b_size);
keysize++;
} while (*keysize);
out:
crypto_free_aead(tfm);
kfree(sg);
out_nosg:
testmgr_free_buf(xoutbuf);
out_nooutbuf:
testmgr_free_buf(axbuf);
out_noaxbuf:
testmgr_free_buf(xbuf);
out_noxbuf:
return;
}
static void test_cipher_speed(const char *algo, int enc, unsigned int sec,
struct cipher_speed_template *template,
......@@ -1427,6 +1692,11 @@ static int do_test(int m)
speed_template_32_64);
break;
case 211:
test_aead_speed("rfc4106(gcm(aes))", ENCRYPT, sec,
NULL, 0, 16, 8, aead_speed_template_20);
break;
case 300:
/* fall through */
......
......@@ -22,6 +22,11 @@ struct cipher_speed_template {
unsigned int klen;
};
struct aead_speed_template {
const char *key;
unsigned int klen;
};
struct hash_speed {
unsigned int blen; /* buffer length */
unsigned int plen; /* per-update length */
......@@ -57,6 +62,11 @@ static u8 speed_template_32_48[] = {32, 48, 0};
static u8 speed_template_32_48_64[] = {32, 48, 64, 0};
static u8 speed_template_32_64[] = {32, 64, 0};
/*
* AEAD speed tests
*/
static u8 aead_speed_template_20[] = {20, 0};
/*
* Digest speed tests
*/
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册