提交 53b434f0 编写于 作者: W Wang Xingchao 提交者: Takashi Iwai

ALSA: hda - Haswell converter power state D0 verify

Haswell converters maybe in wrong power state before usage.
i.e. only converter 0 is in D0, converter 1/2 are in D3.
When pin choose converter 1/2, there's no audio output, this
cause dependency when playing differnt stream on pins.

AUD_PWRST  ConvertorA_Widget_Power_State_Current        D0
AUD_PWRST  ConvertorA_Widget_Power_State_Requsted       D0
AUD_PWRST  ConvertorB_Widget_Power_State_Current        D3
AUD_PWRST  ConvertorB_Widget_Power_State_Requested      D3
AUD_PWRST  ConvC_Widget_PwrSt_Curr                      D3
AUD_PWRST  ConvC_Widget_PwrSt_Req                       D3

This patch check converter's power state and set D0 if it's in D3 mode.
Signed-off-by: NWang Xingchao <xingchao.wang@linux.intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
上级 06ec56d3
......@@ -1018,10 +1018,19 @@ static void hdmi_unsol_event(struct hda_codec *codec, unsigned int res)
hdmi_non_intrinsic_event(codec, res);
}
static void haswell_verify_pin_D0(struct hda_codec *codec, hda_nid_t nid)
static void haswell_verify_pin_D0(struct hda_codec *codec,
hda_nid_t cvt_nid, hda_nid_t nid)
{
int pwr, lamp, ramp;
/* For Haswell, the converter 1/2 may keep in D3 state after bootup,
* thus pins could only choose converter 0 for use. Make sure the
* converters are in correct power state */
pwr = snd_hda_codec_read(codec, cvt_nid, 0, AC_VERB_GET_POWER_STATE, 0);
pwr = (pwr & AC_PWRST_ACTUAL) >> AC_PWRST_ACTUAL_SHIFT;
if (pwr != AC_PWRST_D0)
snd_hda_codec_write(codec, cvt_nid, 0, AC_VERB_SET_POWER_STATE, AC_PWRST_D0);
pwr = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_POWER_STATE, 0);
pwr = (pwr & AC_PWRST_ACTUAL) >> AC_PWRST_ACTUAL_SHIFT;
if (pwr != AC_PWRST_D0) {
......@@ -1068,7 +1077,7 @@ static int hdmi_setup_stream(struct hda_codec *codec, hda_nid_t cvt_nid,
int new_pinctl = 0;
if (codec->vendor_id == 0x80862807)
haswell_verify_pin_D0(codec, pin_nid);
haswell_verify_pin_D0(codec, cvt_nid, pin_nid);
if (snd_hda_query_pin_caps(codec, pin_nid) & AC_PINCAP_HBR) {
pinctl = snd_hda_codec_read(codec, pin_nid, 0,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册