提交 532abc3a 编写于 作者: N Naveen Krishna Ch 提交者: Sylwester Nawrocki

clk: samsung: add initial clock support for Exynos7 SoC

Add initial clock support for Exynos7 SoC which is required
to bring up platforms based on Exynos7.
Signed-off-by: NNaveen Krishna Ch <naveenkrishna.ch@gmail.com>
Signed-off-by: NAbhilash Kesavan <a.kesavan@samsung.com>
Reviewed-by: NThomas Abraham <thomas.ab@samsung.com>
Tested-by: NThomas Abraham <thomas.ab@samsung.com>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
上级 0e5af270
* Samsung Exynos7 Clock Controller
Exynos7 clock controller has various blocks which are instantiated
independently from the device-tree. These clock controllers
generate and supply clocks to various hardware blocks within
the SoC.
Each clock is assigned an identifier and client nodes can use
this identifier to specify the clock which they consume. All
available clocks are defined as preprocessor macros in
dt-bindings/clock/exynos7-clk.h header and can be used in
device tree sources.
External clocks:
There are several clocks that are generated outside the SoC. It
is expected that they are defined using standard clock bindings
with following clock-output-names:
- "fin_pll" - PLL input clock from XXTI
Required Properties for Clock Controller:
- compatible: clock controllers will use one of the following
compatible strings to indicate the clock controller
functionality.
- "samsung,exynos7-clock-topc"
- "samsung,exynos7-clock-top0"
- "samsung,exynos7-clock-peric0"
- "samsung,exynos7-clock-peric1"
- "samsung,exynos7-clock-peris"
- reg: physical base address of the controller and the length of
memory mapped region.
- #clock-cells: should be 1.
- clocks: list of clock identifiers which are fed as the input to
the given clock controller. Please refer the next section to
find the input clocks for a given controller.
- clock-names: list of names of clocks which are fed as the input
to the given clock controller.
Input clocks for top0 clock controller:
- fin_pll
- dout_sclk_bus0_pll
- dout_sclk_bus1_pll
- dout_sclk_cc_pll
- dout_sclk_mfc_pll
Input clocks for peric0 clock controller:
- fin_pll
- dout_aclk_peric0_66
- sclk_uart0
Input clocks for peric1 clock controller:
- fin_pll
- dout_aclk_peric1_66
- sclk_uart1
- sclk_uart2
- sclk_uart3
Input clocks for peris clock controller:
- fin_pll
- dout_aclk_peris_66
......@@ -13,6 +13,7 @@ obj-$(CONFIG_SOC_EXYNOS5420) += clk-exynos5420.o
obj-$(CONFIG_SOC_EXYNOS5440) += clk-exynos5440.o
obj-$(CONFIG_ARCH_EXYNOS) += clk-exynos-audss.o
obj-$(CONFIG_ARCH_EXYNOS) += clk-exynos-clkout.o
obj-$(CONFIG_ARCH_EXYNOS7) += clk-exynos7.o
obj-$(CONFIG_S3C2410_COMMON_CLK)+= clk-s3c2410.o
obj-$(CONFIG_S3C2410_COMMON_DCLK)+= clk-s3c2410-dclk.o
obj-$(CONFIG_S3C2412_COMMON_CLK)+= clk-s3c2412.o
......
/*
* Copyright (c) 2014 Samsung Electronics Co., Ltd.
* Author: Naveen Krishna Ch <naveenkrishna.ch@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/clk-provider.h>
#include <linux/of.h>
#include "clk.h"
#include <dt-bindings/clock/exynos7-clk.h>
/* Register Offset definitions for CMU_TOPC (0x10570000) */
#define CC_PLL_LOCK 0x0000
#define BUS0_PLL_LOCK 0x0004
#define BUS1_DPLL_LOCK 0x0008
#define MFC_PLL_LOCK 0x000C
#define AUD_PLL_LOCK 0x0010
#define CC_PLL_CON0 0x0100
#define BUS0_PLL_CON0 0x0110
#define BUS1_DPLL_CON0 0x0120
#define MFC_PLL_CON0 0x0130
#define AUD_PLL_CON0 0x0140
#define MUX_SEL_TOPC0 0x0200
#define MUX_SEL_TOPC1 0x0204
#define MUX_SEL_TOPC3 0x020C
#define DIV_TOPC1 0x0604
#define DIV_TOPC3 0x060C
static struct samsung_fixed_factor_clock topc_fixed_factor_clks[] __initdata = {
FFACTOR(0, "ffac_topc_bus0_pll_div2", "mout_bus0_pll_ctrl", 1, 2, 0),
FFACTOR(0, "ffac_topc_bus0_pll_div4",
"ffac_topc_bus0_pll_div2", 1, 2, 0),
FFACTOR(0, "ffac_topc_bus1_pll_div2", "mout_bus1_pll_ctrl", 1, 2, 0),
FFACTOR(0, "ffac_topc_cc_pll_div2", "mout_cc_pll_ctrl", 1, 2, 0),
FFACTOR(0, "ffac_topc_mfc_pll_div2", "mout_mfc_pll_ctrl", 1, 2, 0),
};
/* List of parent clocks for Muxes in CMU_TOPC */
PNAME(mout_bus0_pll_ctrl_p) = { "fin_pll", "fout_bus0_pll" };
PNAME(mout_bus1_pll_ctrl_p) = { "fin_pll", "fout_bus1_pll" };
PNAME(mout_cc_pll_ctrl_p) = { "fin_pll", "fout_cc_pll" };
PNAME(mout_mfc_pll_ctrl_p) = { "fin_pll", "fout_mfc_pll" };
PNAME(mout_topc_group2) = { "mout_sclk_bus0_pll_cmuc",
"mout_sclk_bus1_pll_cmuc", "mout_sclk_cc_pll_cmuc",
"mout_sclk_mfc_pll_cmuc" };
PNAME(mout_sclk_bus0_pll_cmuc_p) = { "mout_bus0_pll_ctrl",
"ffac_topc_bus0_pll_div2", "ffac_topc_bus0_pll_div4"};
PNAME(mout_sclk_bus1_pll_cmuc_p) = { "mout_bus1_pll_ctrl",
"ffac_topc_bus1_pll_div2"};
PNAME(mout_sclk_cc_pll_cmuc_p) = { "mout_cc_pll_ctrl",
"ffac_topc_cc_pll_div2"};
PNAME(mout_sclk_mfc_pll_cmuc_p) = { "mout_mfc_pll_ctrl",
"ffac_topc_mfc_pll_div2"};
PNAME(mout_sclk_bus0_pll_out_p) = {"mout_bus0_pll_ctrl",
"ffac_topc_bus0_pll_div2"};
static unsigned long topc_clk_regs[] __initdata = {
CC_PLL_LOCK,
BUS0_PLL_LOCK,
BUS1_DPLL_LOCK,
MFC_PLL_LOCK,
AUD_PLL_LOCK,
CC_PLL_CON0,
BUS0_PLL_CON0,
BUS1_DPLL_CON0,
MFC_PLL_CON0,
AUD_PLL_CON0,
MUX_SEL_TOPC0,
MUX_SEL_TOPC1,
MUX_SEL_TOPC3,
DIV_TOPC1,
DIV_TOPC3,
};
static struct samsung_mux_clock topc_mux_clks[] __initdata = {
MUX(0, "mout_bus0_pll_ctrl", mout_bus0_pll_ctrl_p, MUX_SEL_TOPC0, 0, 1),
MUX(0, "mout_bus1_pll_ctrl", mout_bus1_pll_ctrl_p, MUX_SEL_TOPC0, 4, 1),
MUX(0, "mout_cc_pll_ctrl", mout_cc_pll_ctrl_p, MUX_SEL_TOPC0, 8, 1),
MUX(0, "mout_mfc_pll_ctrl", mout_mfc_pll_ctrl_p, MUX_SEL_TOPC0, 12, 1),
MUX(0, "mout_sclk_bus0_pll_cmuc", mout_sclk_bus0_pll_cmuc_p,
MUX_SEL_TOPC0, 16, 2),
MUX(0, "mout_sclk_bus1_pll_cmuc", mout_sclk_bus1_pll_cmuc_p,
MUX_SEL_TOPC0, 20, 1),
MUX(0, "mout_sclk_cc_pll_cmuc", mout_sclk_cc_pll_cmuc_p,
MUX_SEL_TOPC0, 24, 1),
MUX(0, "mout_sclk_mfc_pll_cmuc", mout_sclk_mfc_pll_cmuc_p,
MUX_SEL_TOPC0, 28, 1),
MUX(0, "mout_sclk_bus0_pll_out", mout_sclk_bus0_pll_out_p,
MUX_SEL_TOPC1, 16, 1),
MUX(0, "mout_aclk_peris_66", mout_topc_group2, MUX_SEL_TOPC3, 24, 2),
};
static struct samsung_div_clock topc_div_clks[] __initdata = {
DIV(DOUT_ACLK_PERIS, "dout_aclk_peris_66", "mout_aclk_peris_66",
DIV_TOPC1, 24, 4),
DIV(DOUT_SCLK_BUS0_PLL, "dout_sclk_bus0_pll", "mout_sclk_bus0_pll_out",
DIV_TOPC3, 0, 3),
DIV(DOUT_SCLK_BUS1_PLL, "dout_sclk_bus1_pll", "mout_bus1_pll_ctrl",
DIV_TOPC3, 8, 3),
DIV(DOUT_SCLK_CC_PLL, "dout_sclk_cc_pll", "mout_cc_pll_ctrl",
DIV_TOPC3, 12, 3),
DIV(DOUT_SCLK_MFC_PLL, "dout_sclk_mfc_pll", "mout_mfc_pll_ctrl",
DIV_TOPC3, 16, 3),
};
static struct samsung_pll_clock topc_pll_clks[] __initdata = {
PLL(pll_1451x, 0, "fout_bus0_pll", "fin_pll", BUS0_PLL_LOCK,
BUS0_PLL_CON0, NULL),
PLL(pll_1452x, 0, "fout_cc_pll", "fin_pll", CC_PLL_LOCK,
CC_PLL_CON0, NULL),
PLL(pll_1452x, 0, "fout_bus1_pll", "fin_pll", BUS1_DPLL_LOCK,
BUS1_DPLL_CON0, NULL),
PLL(pll_1452x, 0, "fout_mfc_pll", "fin_pll", MFC_PLL_LOCK,
MFC_PLL_CON0, NULL),
PLL(pll_1460x, 0, "fout_aud_pll", "fin_pll", AUD_PLL_LOCK,
AUD_PLL_CON0, NULL),
};
static struct samsung_cmu_info topc_cmu_info __initdata = {
.pll_clks = topc_pll_clks,
.nr_pll_clks = ARRAY_SIZE(topc_pll_clks),
.mux_clks = topc_mux_clks,
.nr_mux_clks = ARRAY_SIZE(topc_mux_clks),
.div_clks = topc_div_clks,
.nr_div_clks = ARRAY_SIZE(topc_div_clks),
.fixed_factor_clks = topc_fixed_factor_clks,
.nr_fixed_factor_clks = ARRAY_SIZE(topc_fixed_factor_clks),
.nr_clk_ids = TOPC_NR_CLK,
.clk_regs = topc_clk_regs,
.nr_clk_regs = ARRAY_SIZE(topc_clk_regs),
};
static void __init exynos7_clk_topc_init(struct device_node *np)
{
samsung_cmu_register_one(np, &topc_cmu_info);
}
CLK_OF_DECLARE(exynos7_clk_topc, "samsung,exynos7-clock-topc",
exynos7_clk_topc_init);
/* Register Offset definitions for CMU_TOP0 (0x105D0000) */
#define MUX_SEL_TOP00 0x0200
#define MUX_SEL_TOP01 0x0204
#define MUX_SEL_TOP03 0x020C
#define MUX_SEL_TOP0_PERIC3 0x023C
#define DIV_TOP03 0x060C
#define DIV_TOP0_PERIC3 0x063C
#define ENABLE_SCLK_TOP0_PERIC3 0x0A3C
/* List of parent clocks for Muxes in CMU_TOP0 */
PNAME(mout_bus0_pll_p) = { "fin_pll", "dout_sclk_bus0_pll" };
PNAME(mout_bus1_pll_p) = { "fin_pll", "dout_sclk_bus1_pll" };
PNAME(mout_cc_pll_p) = { "fin_pll", "dout_sclk_cc_pll" };
PNAME(mout_mfc_pll_p) = { "fin_pll", "dout_sclk_mfc_pll" };
PNAME(mout_top0_half_bus0_pll_p) = {"mout_top0_bus0_pll",
"ffac_top0_bus0_pll_div2"};
PNAME(mout_top0_half_bus1_pll_p) = {"mout_top0_bus1_pll",
"ffac_top0_bus1_pll_div2"};
PNAME(mout_top0_half_cc_pll_p) = {"mout_top0_cc_pll",
"ffac_top0_cc_pll_div2"};
PNAME(mout_top0_half_mfc_pll_p) = {"mout_top0_mfc_pll",
"ffac_top0_mfc_pll_div2"};
PNAME(mout_top0_group1) = {"mout_top0_half_bus0_pll",
"mout_top0_half_bus1_pll", "mout_top0_half_cc_pll",
"mout_top0_half_mfc_pll"};
static unsigned long top0_clk_regs[] __initdata = {
MUX_SEL_TOP00,
MUX_SEL_TOP01,
MUX_SEL_TOP03,
MUX_SEL_TOP0_PERIC3,
DIV_TOP03,
DIV_TOP0_PERIC3,
ENABLE_SCLK_TOP0_PERIC3,
};
static struct samsung_mux_clock top0_mux_clks[] __initdata = {
MUX(0, "mout_top0_mfc_pll", mout_mfc_pll_p, MUX_SEL_TOP00, 4, 1),
MUX(0, "mout_top0_cc_pll", mout_cc_pll_p, MUX_SEL_TOP00, 8, 1),
MUX(0, "mout_top0_bus1_pll", mout_bus1_pll_p, MUX_SEL_TOP00, 12, 1),
MUX(0, "mout_top0_bus0_pll", mout_bus0_pll_p, MUX_SEL_TOP00, 16, 1),
MUX(0, "mout_top0_half_mfc_pll", mout_top0_half_mfc_pll_p,
MUX_SEL_TOP01, 4, 1),
MUX(0, "mout_top0_half_cc_pll", mout_top0_half_cc_pll_p,
MUX_SEL_TOP01, 8, 1),
MUX(0, "mout_top0_half_bus1_pll", mout_top0_half_bus1_pll_p,
MUX_SEL_TOP01, 12, 1),
MUX(0, "mout_top0_half_bus0_pll", mout_top0_half_bus0_pll_p,
MUX_SEL_TOP01, 16, 1),
MUX(0, "mout_aclk_peric1_66", mout_top0_group1, MUX_SEL_TOP03, 12, 2),
MUX(0, "mout_aclk_peric0_66", mout_top0_group1, MUX_SEL_TOP03, 20, 2),
MUX(0, "mout_sclk_uart3", mout_top0_group1, MUX_SEL_TOP0_PERIC3, 4, 2),
MUX(0, "mout_sclk_uart2", mout_top0_group1, MUX_SEL_TOP0_PERIC3, 8, 2),
MUX(0, "mout_sclk_uart1", mout_top0_group1, MUX_SEL_TOP0_PERIC3, 12, 2),
MUX(0, "mout_sclk_uart0", mout_top0_group1, MUX_SEL_TOP0_PERIC3, 16, 2),
};
static struct samsung_div_clock top0_div_clks[] __initdata = {
DIV(DOUT_ACLK_PERIC1, "dout_aclk_peric1_66", "mout_aclk_peric1_66",
DIV_TOP03, 12, 6),
DIV(DOUT_ACLK_PERIC0, "dout_aclk_peric0_66", "mout_aclk_peric0_66",
DIV_TOP03, 20, 6),
DIV(0, "dout_sclk_uart3", "mout_sclk_uart3", DIV_TOP0_PERIC3, 4, 4),
DIV(0, "dout_sclk_uart2", "mout_sclk_uart2", DIV_TOP0_PERIC3, 8, 4),
DIV(0, "dout_sclk_uart1", "mout_sclk_uart1", DIV_TOP0_PERIC3, 12, 4),
DIV(0, "dout_sclk_uart0", "mout_sclk_uart0", DIV_TOP0_PERIC3, 16, 4),
};
static struct samsung_gate_clock top0_gate_clks[] __initdata = {
GATE(CLK_SCLK_UART3, "sclk_uart3", "dout_sclk_uart3",
ENABLE_SCLK_TOP0_PERIC3, 4, 0, 0),
GATE(CLK_SCLK_UART2, "sclk_uart2", "dout_sclk_uart2",
ENABLE_SCLK_TOP0_PERIC3, 8, 0, 0),
GATE(CLK_SCLK_UART1, "sclk_uart1", "dout_sclk_uart1",
ENABLE_SCLK_TOP0_PERIC3, 12, 0, 0),
GATE(CLK_SCLK_UART0, "sclk_uart0", "dout_sclk_uart0",
ENABLE_SCLK_TOP0_PERIC3, 16, 0, 0),
};
static struct samsung_fixed_factor_clock top0_fixed_factor_clks[] __initdata = {
FFACTOR(0, "ffac_top0_bus0_pll_div2", "mout_top0_bus0_pll", 1, 2, 0),
FFACTOR(0, "ffac_top0_bus1_pll_div2", "mout_top0_bus1_pll", 1, 2, 0),
FFACTOR(0, "ffac_top0_cc_pll_div2", "mout_top0_cc_pll", 1, 2, 0),
FFACTOR(0, "ffac_top0_mfc_pll_div2", "mout_top0_mfc_pll", 1, 2, 0),
};
static struct samsung_cmu_info top0_cmu_info __initdata = {
.mux_clks = top0_mux_clks,
.nr_mux_clks = ARRAY_SIZE(top0_mux_clks),
.div_clks = top0_div_clks,
.nr_div_clks = ARRAY_SIZE(top0_div_clks),
.gate_clks = top0_gate_clks,
.nr_gate_clks = ARRAY_SIZE(top0_gate_clks),
.fixed_factor_clks = top0_fixed_factor_clks,
.nr_fixed_factor_clks = ARRAY_SIZE(top0_fixed_factor_clks),
.nr_clk_ids = TOP0_NR_CLK,
.clk_regs = top0_clk_regs,
.nr_clk_regs = ARRAY_SIZE(top0_clk_regs),
};
static void __init exynos7_clk_top0_init(struct device_node *np)
{
samsung_cmu_register_one(np, &top0_cmu_info);
}
CLK_OF_DECLARE(exynos7_clk_top0, "samsung,exynos7-clock-top0",
exynos7_clk_top0_init);
/* Register Offset definitions for CMU_PERIC0 (0x13610000) */
#define MUX_SEL_PERIC0 0x0200
#define ENABLE_PCLK_PERIC0 0x0900
#define ENABLE_SCLK_PERIC0 0x0A00
/* List of parent clocks for Muxes in CMU_PERIC0 */
PNAME(mout_aclk_peric0_66_p) = { "fin_pll", "dout_aclk_peric0_66" };
PNAME(mout_sclk_uart0_p) = { "fin_pll", "sclk_uart0" };
static unsigned long peric0_clk_regs[] __initdata = {
MUX_SEL_PERIC0,
ENABLE_PCLK_PERIC0,
ENABLE_SCLK_PERIC0,
};
static struct samsung_mux_clock peric0_mux_clks[] __initdata = {
MUX(0, "mout_aclk_peric0_66_user", mout_aclk_peric0_66_p,
MUX_SEL_PERIC0, 0, 1),
MUX(0, "mout_sclk_uart0_user", mout_sclk_uart0_p,
MUX_SEL_PERIC0, 16, 1),
};
static struct samsung_gate_clock peric0_gate_clks[] __initdata = {
GATE(PCLK_UART0, "pclk_uart0", "mout_aclk_peric0_66_user",
ENABLE_PCLK_PERIC0, 16, 0, 0),
GATE(SCLK_UART0, "sclk_uart0_user", "mout_sclk_uart0_user",
ENABLE_SCLK_PERIC0, 16, 0, 0),
};
static struct samsung_cmu_info peric0_cmu_info __initdata = {
.mux_clks = peric0_mux_clks,
.nr_mux_clks = ARRAY_SIZE(peric0_mux_clks),
.gate_clks = peric0_gate_clks,
.nr_gate_clks = ARRAY_SIZE(peric0_gate_clks),
.nr_clk_ids = PERIC0_NR_CLK,
.clk_regs = peric0_clk_regs,
.nr_clk_regs = ARRAY_SIZE(peric0_clk_regs),
};
static void __init exynos7_clk_peric0_init(struct device_node *np)
{
samsung_cmu_register_one(np, &peric0_cmu_info);
}
/* Register Offset definitions for CMU_PERIC1 (0x14C80000) */
#define MUX_SEL_PERIC10 0x0200
#define MUX_SEL_PERIC11 0x0204
#define ENABLE_PCLK_PERIC1 0x0900
#define ENABLE_SCLK_PERIC10 0x0A00
CLK_OF_DECLARE(exynos7_clk_peric0, "samsung,exynos7-clock-peric0",
exynos7_clk_peric0_init);
/* List of parent clocks for Muxes in CMU_PERIC1 */
PNAME(mout_aclk_peric1_66_p) = { "fin_pll", "dout_aclk_peric1_66" };
PNAME(mout_sclk_uart1_p) = { "fin_pll", "sclk_uart1" };
PNAME(mout_sclk_uart2_p) = { "fin_pll", "sclk_uart2" };
PNAME(mout_sclk_uart3_p) = { "fin_pll", "sclk_uart3" };
static unsigned long peric1_clk_regs[] __initdata = {
MUX_SEL_PERIC10,
MUX_SEL_PERIC11,
ENABLE_PCLK_PERIC1,
ENABLE_SCLK_PERIC10,
};
static struct samsung_mux_clock peric1_mux_clks[] __initdata = {
MUX(0, "mout_aclk_peric1_66_user", mout_aclk_peric1_66_p,
MUX_SEL_PERIC10, 0, 1),
MUX(0, "mout_sclk_uart1_user", mout_sclk_uart1_p,
MUX_SEL_PERIC11, 20, 1),
MUX(0, "mout_sclk_uart2_user", mout_sclk_uart2_p,
MUX_SEL_PERIC11, 24, 1),
MUX(0, "mout_sclk_uart3_user", mout_sclk_uart3_p,
MUX_SEL_PERIC11, 28, 1),
};
static struct samsung_gate_clock peric1_gate_clks[] __initdata = {
GATE(PCLK_UART1, "pclk_uart1", "mout_aclk_peric1_66_user",
ENABLE_PCLK_PERIC1, 9, 0, 0),
GATE(PCLK_UART2, "pclk_uart2", "mout_aclk_peric1_66_user",
ENABLE_PCLK_PERIC1, 10, 0, 0),
GATE(PCLK_UART3, "pclk_uart3", "mout_aclk_peric1_66_user",
ENABLE_PCLK_PERIC1, 11, 0, 0),
GATE(SCLK_UART1, "sclk_uart1_user", "mout_sclk_uart1_user",
ENABLE_SCLK_PERIC10, 9, 0, 0),
GATE(SCLK_UART2, "sclk_uart2_user", "mout_sclk_uart2_user",
ENABLE_SCLK_PERIC10, 10, 0, 0),
GATE(SCLK_UART3, "sclk_uart3_user", "mout_sclk_uart3_user",
ENABLE_SCLK_PERIC10, 11, 0, 0),
};
static struct samsung_cmu_info peric1_cmu_info __initdata = {
.mux_clks = peric1_mux_clks,
.nr_mux_clks = ARRAY_SIZE(peric1_mux_clks),
.gate_clks = peric1_gate_clks,
.nr_gate_clks = ARRAY_SIZE(peric1_gate_clks),
.nr_clk_ids = PERIC1_NR_CLK,
.clk_regs = peric1_clk_regs,
.nr_clk_regs = ARRAY_SIZE(peric1_clk_regs),
};
static void __init exynos7_clk_peric1_init(struct device_node *np)
{
samsung_cmu_register_one(np, &peric1_cmu_info);
}
CLK_OF_DECLARE(exynos7_clk_peric1, "samsung,exynos7-clock-peric1",
exynos7_clk_peric1_init);
/* Register Offset definitions for CMU_PERIS (0x10040000) */
#define MUX_SEL_PERIS 0x0200
#define ENABLE_PCLK_PERIS_SECURE_CHIPID 0x0910
#define ENABLE_SCLK_PERIS_SECURE_CHIPID 0x0A10
/* List of parent clocks for Muxes in CMU_PERIS */
PNAME(mout_aclk_peris_66_p) = { "fin_pll", "dout_aclk_peris_66" };
static unsigned long peris_clk_regs[] __initdata = {
MUX_SEL_PERIS,
ENABLE_PCLK_PERIS_SECURE_CHIPID,
ENABLE_SCLK_PERIS_SECURE_CHIPID,
};
static struct samsung_mux_clock peris_mux_clks[] __initdata = {
MUX(0, "mout_aclk_peris_66_user",
mout_aclk_peris_66_p, MUX_SEL_PERIS, 0, 1),
};
static struct samsung_gate_clock peris_gate_clks[] __initdata = {
GATE(PCLK_CHIPID, "pclk_chipid", "mout_aclk_peris_66_user",
ENABLE_PCLK_PERIS_SECURE_CHIPID, 0, 0, 0),
GATE(SCLK_CHIPID, "sclk_chipid", "fin_pll",
ENABLE_SCLK_PERIS_SECURE_CHIPID, 0, 0, 0),
};
static struct samsung_cmu_info peris_cmu_info __initdata = {
.mux_clks = peris_mux_clks,
.nr_mux_clks = ARRAY_SIZE(peris_mux_clks),
.gate_clks = peris_gate_clks,
.nr_gate_clks = ARRAY_SIZE(peris_gate_clks),
.nr_clk_ids = PERIS_NR_CLK,
.clk_regs = peris_clk_regs,
.nr_clk_regs = ARRAY_SIZE(peris_clk_regs),
};
static void __init exynos7_clk_peris_init(struct device_node *np)
{
samsung_cmu_register_one(np, &peris_cmu_info);
}
CLK_OF_DECLARE(exynos7_clk_peris, "samsung,exynos7-clock-peris",
exynos7_clk_peris_init);
/*
* Copyright (c) 2014 Samsung Electronics Co., Ltd.
* Author: Naveen Krishna Ch <naveenkrishna.ch@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef _DT_BINDINGS_CLOCK_EXYNOS7_H
#define _DT_BINDINGS_CLOCK_EXYNOS7_H
/* TOPC */
#define DOUT_ACLK_PERIS 1
#define DOUT_SCLK_BUS0_PLL 2
#define DOUT_SCLK_BUS1_PLL 3
#define DOUT_SCLK_CC_PLL 4
#define DOUT_SCLK_MFC_PLL 5
#define TOPC_NR_CLK 6
/* TOP0 */
#define DOUT_ACLK_PERIC1 1
#define DOUT_ACLK_PERIC0 2
#define CLK_SCLK_UART0 3
#define CLK_SCLK_UART1 4
#define CLK_SCLK_UART2 5
#define CLK_SCLK_UART3 6
#define TOP0_NR_CLK 7
/* PERIC0 */
#define PCLK_UART0 1
#define SCLK_UART0 2
#define PERIC0_NR_CLK 3
/* PERIC1 */
#define PCLK_UART1 1
#define PCLK_UART2 2
#define PCLK_UART3 3
#define SCLK_UART1 4
#define SCLK_UART2 5
#define SCLK_UART3 6
#define PERIC1_NR_CLK 7
/* PERIS */
#define PCLK_CHIPID 1
#define SCLK_CHIPID 2
#define PERIS_NR_CLK 3
#endif /* _DT_BINDINGS_CLOCK_EXYNOS7_H */
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册