Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.26

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.26:
  sh: Add -mno-fdpic to default flags.
  sh: add resource of USB host for SH7723
  usb: r8a66597-hcd: Add support for SH7723 USB host
  sh: Fix compile error SH7763 setup code
  sh: Add SH7723 SCIF support

arch/sh/Makefile

@@ -41,6 +41,8 @@ cflags-$(CONFIG_CPU_SH5)		:= $(call cc-option,-m5-32media-nofpu,)
 cflags-$(CONFIG_CPU_BIG_ENDIAN)		+= -mb
 cflags-$(CONFIG_CPU_LITTLE_ENDIAN)	+= -ml
 
+cflags-y	+= $(call cc-option,-mno-fdpic)
+
 #
 # -Wa,-isa= tuning implies -Wa,-dsp for the versions of binutils that
 # support it, while -Wa,-dsp by itself limits the range of usable opcodes

arch/sh/kernel/cpu/sh4a/setup-sh7723.c

@@ -16,6 +16,21 @@
 
 static struct plat_sci_port sci_platform_data[] = {
 	{
+		.mapbase        = 0xffe00000,
+		.flags          = UPF_BOOT_AUTOCONF,
+		.type           = PORT_SCIF,
+		.irqs           = { 80, 80, 80, 80 },
+	},{
+		.mapbase        = 0xffe10000,
+		.flags          = UPF_BOOT_AUTOCONF,
+		.type           = PORT_SCIF,
+		.irqs           = { 81, 81, 81, 81 },
+	},{
+		.mapbase        = 0xffe20000,
+		.flags          = UPF_BOOT_AUTOCONF,
+		.type           = PORT_SCIF,
+		.irqs           = { 82, 82, 82, 82 },
+	},{
 		.mapbase	= 0xa4e30000,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCI,
@@ -73,9 +88,35 @@ static struct platform_device rtc_device = {
 	.resource	= rtc_resources,
 };
 
+static struct resource sh7723_usb_host_resources[] = {
+	[0] = {
+		.name	= "r8a66597_hcd",
+		.start	= 0xa4d80000,
+		.end	= 0xa4d800ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 65,
+		.end	= 65,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sh7723_usb_host_device = {
+	.name		= "r8a66597_hcd",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= NULL,         /*  not use dma */
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(sh7723_usb_host_resources),
+	.resource	= sh7723_usb_host_resources,
+};
+
 static struct platform_device *sh7723_devices[] __initdata = {
 	&sci_device,
 	&rtc_device,
+	&sh7723_usb_host_device,
 };
 
 static int __init sh7723_devices_setup(void)

arch/sh/kernel/cpu/sh4a/setup-sh7763.c

@@ -291,8 +291,9 @@ static struct intc_sense_reg irq_sense_registers[] __initdata = {
 };
 
 static DECLARE_INTC_DESC(intc_irq_desc, "sh7763-irq", irq_vectors,
-			 NULL, NULL, irq_mask_registers, irq_prio_registers,
-			 irq_sense_registers);
+			NULL, irq_mask_registers, irq_prio_registers,
+			irq_sense_registers);
+
 
 /* External interrupt pins in IRL mode */
 static struct intc_vect irl_vectors[] __initdata = {
@@ -324,10 +325,10 @@ static struct intc_mask_reg irl7654_mask_registers[] __initdata = {
 };
 
 static DECLARE_INTC_DESC(intc_irl7654_desc, "sh7763-irl7654", irl_vectors,
-			 NULL, NULL, irl7654_mask_registers, NULL, NULL);
+			NULL, irl7654_mask_registers, NULL, NULL);
 
 static DECLARE_INTC_DESC(intc_irl3210_desc, "sh7763-irl3210", irl_vectors,
-			 NULL, NULL, irl3210_mask_registers, NULL, NULL);
+			NULL, irl3210_mask_registers, NULL, NULL);
 
 #define INTC_ICR0	0xffd00000
 #define INTC_INTMSK0	0xffd00044

drivers/usb/host/Kconfig

@@ -300,8 +300,8 @@ config USB_R8A66597_HCD
 	  module will be called r8a66597-hcd.
 
 config SUPERH_ON_CHIP_R8A66597
-	boolean "Enable SuperH on-chip USB like the R8A66597"
-	depends on USB_R8A66597_HCD && CPU_SUBTYPE_SH7366
+	boolean "Enable SuperH on-chip R8A66597 USB"
+	depends on USB_R8A66597_HCD && (CPU_SUBTYPE_SH7366 || CPU_SUBTYPE_SH7723)
 	help
-	   Renesas SuperH processor has USB like the R8A66597.
-	   This driver supported processor is SH7366.
+	   This driver enables support for the on-chip R8A66597 in the
+	   SH7366 and SH7723 processors.