提交 52d3e561 编写于 作者: F Finn Thain 提交者: Martin K. Petersen

atari_scsi: Adopt NCR5380.c core driver

Add support for the Atari ST DMA chip to the NCR5380.c core driver.
This code is copied from atari_NCR5380.c.
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Tested-by: NMichael Schmitz <schmitzmic@gmail.com>
Tested-by: NOndrej Zary <linux@rainbow-software.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
上级 8053b0ee
......@@ -29,6 +29,8 @@
* Ronald van Cuijlenborg, Alan Cox and others.
*/
/* Ported to Atari by Roman Hodek and others. */
/*
* Further development / testing that should be done :
*
......@@ -141,6 +143,14 @@
#define NCR5380_io_delay(x)
#endif
#ifndef NCR5380_acquire_dma_irq
#define NCR5380_acquire_dma_irq(x) (1)
#endif
#ifndef NCR5380_release_dma_irq
#define NCR5380_release_dma_irq(x)
#endif
static int do_abort(struct Scsi_Host *);
static void do_reset(struct Scsi_Host *);
......@@ -658,6 +668,9 @@ static int NCR5380_queue_command(struct Scsi_Host *instance,
cmd->result = 0;
if (!NCR5380_acquire_dma_irq(instance))
return SCSI_MLQUEUE_HOST_BUSY;
spin_lock_irqsave(&hostdata->lock, flags);
/*
......@@ -682,6 +695,19 @@ static int NCR5380_queue_command(struct Scsi_Host *instance,
return 0;
}
static inline void maybe_release_dma_irq(struct Scsi_Host *instance)
{
struct NCR5380_hostdata *hostdata = shost_priv(instance);
/* Caller does the locking needed to set & test these data atomically */
if (list_empty(&hostdata->disconnected) &&
list_empty(&hostdata->unissued) &&
list_empty(&hostdata->autosense) &&
!hostdata->connected &&
!hostdata->selecting)
NCR5380_release_dma_irq(instance);
}
/**
* dequeue_next_cmd - dequeue a command for processing
* @instance: the scsi host instance
......@@ -783,6 +809,7 @@ static void NCR5380_main(struct work_struct *work)
if (!NCR5380_select(instance, cmd)) {
dsprintk(NDEBUG_MAIN, instance, "main: select complete\n");
maybe_release_dma_irq(instance);
} else {
dsprintk(NDEBUG_MAIN | NDEBUG_QUEUES, instance,
"main: select failed, returning %p to queue\n", cmd);
......@@ -1828,6 +1855,8 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
/* Enable reselect interrupts */
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
maybe_release_dma_irq(instance);
return;
case MESSAGE_REJECT:
/* Accept message by clearing ACK */
......@@ -1963,6 +1992,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
hostdata->connected = NULL;
cmd->result = DID_ERROR << 16;
complete_cmd(instance, cmd);
maybe_release_dma_irq(instance);
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
return;
}
......@@ -2256,6 +2286,7 @@ static int NCR5380_abort(struct scsi_cmnd *cmd)
dsprintk(NDEBUG_ABORT, instance, "abort: successfully aborted %p\n", cmd);
queue_work(hostdata->work_q, &hostdata->main_task);
maybe_release_dma_irq(instance);
spin_unlock_irqrestore(&hostdata->lock, flags);
return result;
......@@ -2336,6 +2367,7 @@ static int NCR5380_bus_reset(struct scsi_cmnd *cmd)
hostdata->dma_len = 0;
queue_work(hostdata->work_q, &hostdata->main_task);
maybe_release_dma_irq(instance);
spin_unlock_irqrestore(&hostdata->lock, flags);
return SUCCESS;
......
......@@ -99,9 +99,9 @@
#define NCR5380_abort atari_scsi_abort
#define NCR5380_info atari_scsi_info
#define NCR5380_dma_read_setup(instance, data, count) \
#define NCR5380_dma_recv_setup(instance, data, count) \
atari_scsi_dma_setup(instance, data, count, 0)
#define NCR5380_dma_write_setup(instance, data, count) \
#define NCR5380_dma_send_setup(instance, data, count) \
atari_scsi_dma_setup(instance, data, count, 1)
#define NCR5380_dma_residual(instance) \
atari_scsi_dma_residual(instance)
......@@ -715,7 +715,7 @@ static void atari_scsi_falcon_reg_write(unsigned char reg, unsigned char value)
}
#include "atari_NCR5380.c"
#include "NCR5380.c"
static int atari_scsi_bus_reset(struct scsi_cmnd *cmd)
{
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册